Identifying candidate gene effects by restricting search space in a multivariate genetic analysis of white matter microstructure

Several genetic variants are thought to influence white matter (WM) integrity, measured with diffusion tensor imaging (DTI). Voxel based methods can test genetic associations, but heavy multiple comparisons corrections are required to adjust for searching the whole brain and for all genetic variants analyzed. Thus, genetic associations are hard to detect even in large studies. Using a recently developed multi-SNP analysis, we examined the joint predictive power of a group of 18 cholesterol-related single nucleotide polymorphisms (SNPs) on WM integrity, measured by fractional anisotropy. To boost power, we limited the analysis to brain voxels that showed significant associations with total serum cholesterol levels. From this space, we identified two genes with effects that replicated in individual voxel-wise analyses of the whole brain. Multivariate analyses of genetic variants on a reduced anatomical search space may help to identify SNPs with strongest effects on the brain from a broad panel of genes.

Information preferences for the evaluation of coastal development impacts on ecosystem services: A multi-criteria assessment in the Australian context

Ecosystem based management requires the integration of various types of assessment indicators. Understanding stakeholders' information preferences is important, in selecting those indicators that best support management and policy. Both the preferences of decision-makers and the general public may matter, in democratic participatory management institutions. This paper presents a multi-criteria analysis aimed at quantifying the relative importance to these groups of economic, ecological and socio-economic indicators usually considered when managing ecosystem services in a coastal development context. The Analytic Hierarchy Process (AHP) is applied within two nationwide surveys in Australia, and preferences of both the general public and decision-makers for these indicators are elicited and compared. Results show that, on average across both groups, the priority in assessing a generic coastal development project is for the ecological assessment of its impacts on marine biodiversity. Ecological assessment indicators are globally preferred to both economic and socio-economic indicators regardless of the nature of the impacts studied. These results are observed for a significantly larger proportion of decision-maker than general public respondents, questioning the extent to which the general public's preferences are well reflected in decision-making processes.

Multi-criteria seismic hazard evaluation for Bangalore city, India

Different seismic hazard components pertaining to Bangalore city,namely soil overburden thickness, effective shear-wave velocity, factor of safety against liquefaction potential, peak ground acceleration at the seismic bedrock, site response in terms of amplification factor, and the predominant frequency, has been individually evaluated. The overburden thickness distribution, predominantly in the range of 5-10 m in the city, has been estimated through a sub-surface model from geotechnical bore-log data. The effective shear-wave velocity distribution, established through Multi-channel Analysis of Surface Wave (MASW) survey and subsequent data interpretation through dispersion analysis, exhibits site class D (180-360 m/s), site class C (360-760 m/s), and site class B (760-1500 m/s) in compliance to the National Earthquake Hazard Reduction Program (NEHRP) nomenclature. The peak ground acceleration has been estimated through deterministic approach, based on the maximum credible earthquake of M-W = 5.1 assumed to be nucleating from the closest active seismic source (Mandya-Channapatna-Bangalore Lineament). The 1-D site response factor, computed at each borehole through geotechnical analysis across the study region, is seen to be ranging from around amplification of one to as high as four times. Correspondingly, the predominant frequency estimated from the Fourier spectrum is found to be predominantly in range of 3.5-5.0 Hz. The soil liquefaction hazard assessment has been estimated in terms of factor of safety against liquefaction potential using standard penetration test data and the underlying soil properties that indicates 90% of the study region to be non-liquefiable. The spatial distributions of the different hazard entities are placed on a GIS platform and subsequently, integrated through analytical hierarchal process. The accomplished deterministic hazard map shows high hazard coverage in the western areas. The microzonation, thus, achieved is envisaged as a first-cut assessment of the site specific hazard in laying out a framework for higher order seismic microzonation as well as a useful decision support tool in overall land-use planning, and hazard management. (C) 2010 Elsevier Ltd. All rights reserved.

Multi-physics modelling for microelectronics and microsystems - current capabilities and future challenges

At present the vast majority of Computer-Aided- Engineering (CAE) analysis calculations for microelectronic and microsystems technologies are undertaken using software tools that focus on single aspects of the physics taking place. For example, the design engineer may use one code to predict the airflow and thermal behavior of an electronic package, then another code to predict the stress in solder joints, and then yet another code to predict electromagnetic radiation throughout the system. The reason for this focus of mesh-based codes on separate parts of the governing physics is essentially due to the numerical technologies used to solve the partial differential equations, combined with the subsequent heritage structure in the software codes. Using different software tools, that each requires model build and meshing, leads to a large investment in time, and hence cost, to undertake each of the simulations. During the last ten years there has been significant developments in the modelling community around multi- physics analysis. These developments are being followed by many of the code vendors who are now providing multi-physics capabilities in their software tools. This paper illustrates current capabilities of multi-physics technology and highlights some of the future challenges

Understanding material deprivation: A comparative European analysis

In this paper, taking advantage of the inclusion of a special module on material deprivation in EU-SILC 2009. we provide a comparative analysis of patterns of deprivation. Our analysis identifies six relatively distinct dimensions of deprivation with generally satisfactory overall levels of reliability and mean levels of reliability across countries. Multi-level analysis based on 28 European countries reveals systematic variation in the importance of within and between country variation for a range of deprivation dimensions. The basic deprivation dimension is the sole dimension to display a graduated pattern of variation across countries. It also reveals the highest correlations with national and household income, the remaining deprivation dimensions and economic stress. It comes closest to capturing an underlying dimension of generalized deprivation that can provide the basis for a comparative European analysis of exclusion from customary standards of living. A multilevel analysis revealed that a range of household characteristics and household reference person socio-economic factors were related to basic deprivation and controlling for contextual differences in such factors allowed us to account for substantial proportions of both within and between country variance. The addition of macro-economic factors relating to average levels of disposable income and income inequality contributed relatively little further in the way of explanatory power. Further analysis revealed the existence of a set of significant interactions between micro socioeconomic attributes and country level gross national disposable income per capita. The impact of socio-economic differentiation was significantly greater where average income levels were lower. Or, in other words, the impact of the latter was greater for more disadvantaged socio-economic groups. Our analysis supports the suggestion that an emphasis on the primary role of income inequality to the neglect of differences in absolute levels of income may be misleading in important respects. (C) 2012 International Sociological Association Research Committee 28 on Social Stratification and Mobility. Published by Elsevier Ltd. All rights reserved.

A 1300-year multi-proxy, high-resolution record from a rich fen in northern Poland:Reconstructing hydrology, land use and climate change

Here we present the first high-resolution multi-proxy analysis of a rich fen in the central-eastern European lowlands. The fen is located in the young glacial landscape of the Sta{ogonek}zki river valley. We investigated the fen's development pathways, asking three main questions: (i) what was the pattern and timing of the peatland's vegetation succession, (ii) how did land use and climate affect the succession in the fen ecosystem, and (iii) to what degree does the reconstructed hydrology for this site correlate with those of other sites in the region in terms of past climate change? Several stages of fen history were determined, beginning with the lake-to-fen transition ca. AD 700. Brown mosses dominated the sampling site from this period to the present. No human impact was found to have occurred until ca. AD 1700, when the first forest cutting began. Around AD 1890 a more significant disturbance took place-this date marks the clear cutting of forests and dramatic landscape openness. Deforestation changed the hydrology and chemistry of the mire, which was revealed by a shift in local plant and testate amoebae communities. We also compared a potential climatic signal recorded in the peat profile before AD 1700 with other sites from the region. © 2013 John Wiley & Sons, Ltd.

Interface management for automating finite element analysis workflows

This paper outlines the importance of robust interface management for facilitating finite element analysis workflows. Topological equivalences between analysis model representations are identified and maintained in an editable and accessible manner. The model and its interfaces are automatically represented using an analysis-specific cellular decomposition of the design space. Rework of boundary conditions following changes to the design geometry or the analysis idealization can be minimized by tracking interface dependencies. Utilizing this information with the Simulation Intent specified by an analyst, automated decisions can be made to process the interface information required to rebuild analysis models. Through this work automated boundary condition application is realized within multi-component, multi-resolution and multi-fidelity analysis workflows.

Genetic mapping of the rice ionome in leaves and grain:Identification of QTLs for 17 elements including arsenic, cadmium, iron and selenium

Research into the composition of cereal grains is motivated by increased interest in food quality. Here multi-element analysis is conducted on leaves and grain of the Bala x Azucena rice mapping population grown in the field. Quantitative trait loci (QTLs) for the concentration of 17 elements were detected, revealing 36 QTLs for leaves and 41 for grains. Epistasis was detected for most elements. There was very little correlation between leaf and grain element concentrations. For selenium, lead, phosphorus and magnesium QTLs were detected in the same location for both tissues. In general, there were no major QTL clusters, suggesting separate regulation of each element. QTLs for grain iron, zinc, molybdenum and selenium are potential targets for marker assisted selection to improve seed nutritional quality. An epistatic interaction for grain arsenic also looks promising to decrease the concentration of this carcinogenic element. © Springer Science+Business Media B.V. 2009.

AnaBench: a Web/CORBA-based workbench for biomolecular sequence analysis

Affiliation: Département de biochimie, Faculté de médecine, Université de Montréal

Analyse multi-échelle des champs magnétiques dans des nuages moléculaires à structures filmentaires

Associée à d'autres techniques observationnelles, la polarimétrie dans le visible ou dans le proche infrarouge permet d'étudier la morphologie des champs magnétiques à la périphérie de nombreuses régions de formation stellaire. A l'intérieur des nuages molécualires la morphologie des champs est connue par polarimétrie submillimétrique, mais rarement pour les mêmes régions. Habituellement, il manque une échelle spatiale intermédiaire pour pouvoir comparer correctement la morphologie du champ magnétique galactique avec celle située à l'intérieur des nuages moléculaires. -- Cette thèse propose les moyens nécessaires pour réaliser ce type d'analyse multi-échelle afin de mieux comprendre le rôle que peuvent jouer les champs magnétiques dans les processus de formation stellaire. La première analyse traite de la région GF 9. Vient ensuite une étude de la morphologie du champ magnétique dans les filaments OMC-2 et OMC-3 suivie d'une analyse multi-échelle dans le complexe de nuages moléculaires Orion A dont OMC-2 et OMC-3 font partie. -- La synthèse des résultats couvrant GF 9 et Orion A est la suivante. Les approches statistiques employées montrent qu'aux grandes échelles spatiales la morphologie des champs magnétiques est poloïdale dans la région GF 9, et probablement hélicoïdale dans la région Orion A. A l'échelle spatiale des enveloppes des nuages moléculaires, les champs magnétiques apparaissent alignés avec les champs situés à leur périphérie. A l'échelle spatiale des coeurs, le champ magnétique poloïdal environnant la région GF 9 est apparemment entraîné par le coeur en rotation, et la diffusion ambipolaire n'y semble pas effective actuellement. Dans Orion A, la morphologie des champs est difficilement détectable dans les sites actifs de formation d'OMC-2, ou bien très fortement contrainte par les effets de la gravité dans OMC-1. Des effets probables de la turbulence ne seont détectés dans aucune des régions observées. -- Les analyses multi-échelles suggèrent donc qu'indépendamment du stade évolutif et de la gamme de masse des régions de formation stellaires, le champ magnétique galactique subit des modifications de sa morphologie aux échelles spatiales comparables à celles des coeurs protostellaires, de la même façon que les propriétés structurelles des nuages moléculaires suivent des lois d'autosimilarité jusqu'à des échelles comparables à celles des coeurs.

Développement d’une nouvelle méthode d’analyse multi-résidus par LDTD/APCI-MS/MS pour la quantification de pesticides et de produits pharmaceutiques dans les eaux usées

Une nouvelle méthode d'extraction en phase solide (SPE) couplée à une technique d'analyse ultrarapide a été développée pour la détermination simultanée de neuf contaminants émergents (l'atrazine, le déséthylatrazine, le 17(béta)-estradiol, l'éthynylestradiol, la noréthindrone, la caféine, la carbamazépine, le diclofénac et le sulfaméthoxazole) provenant de différentes classes thérapeutiques et présents dans les eaux usées. La pré-concentration et la purification des échantillons a été réalisée avec une cartouche SPE en mode mixte (Strata ABW) ayant à la fois des propriétés échangeuses de cations et d'anions suivie d'une analyse par une désorption thermique par diode laser/ionisation chimique à pression atmosphérique couplée à la spectrométrie de masse en tandem (LDTD-APCI-MS/MS). La LDTD est une nouvelle méthode d'introduction d'échantillon qui réduit le temps total d'analyse à moins de 15 secondes par rapport à plusieurs minutes avec la chromatographie liquide couplée à la spectrométrie de masse en tandem traditionnelle (LC-MS/MS). Plusieurs paramètres SPE ont été évalués dans le but d'optimiser l'efficacité de récupération lors de l'extraction des analytes provenant des eaux usées, tels que la nature de la phase stationnaire, le débit de chargement, le pH d'extraction, le volume et la composition de la solution de lavage et le volume de l'échantillon initial. Cette nouvelle méthode a été appliquée avec succès à de vrais échantillons d'eaux usées provenant d'un réservoir de décantation primaire. Le recouvrement des composés ciblés provenant des eaux usées a été de 78 à 106%, la limite de détection a été de 30 à 122 ng L-1, alors que la limite de quantification a été de 88 à 370 ng L-1. Les courbes d'étalonnage dans les matrices d'eaux usées ont montré une bonne linéarité (R2 > 0,991) pour les analytes cibles ainsi qu’une précision avec un coefficient de variance inférieure à 15%.

Efectividad del tratamiento farmacológico de la agresividad en pacientes con trastorno límite de la personalidad. Revisión sistemática

Introducción: el Trastorno Límite de la Personalidad afecta del 2% al 6% de los adultos en Estados Unidos. Es una condición de alta relevancia dentro de las patologías psiquiátricas debido a características como impulsividad, inestabilidad en las relaciones interpersonales, disregulación en el estado de ánimo y comportamiento agresivo. Esto determina un impacto negativo en la funcionalidad del individuo siendo la agresividad contra sí mismo o contra otras personas uno de sus componentes claves. Métodos: Revisión sistemática de la literatura de artículos de bases de datos y búsqueda manual de revistas relacionadas que aportaran la mejor evidencia con el fin de encontrar estudios que evaluaran, con instrumentos objetivos, los tratamientos farmacológicos disponibles para el manejo de la agresividad en el TLP .Se evaluó calidad metodológica y los estudios se organizaron en tablas de evidencia. Resultados: La búsqueda arrojo 1081 artículos de los cuales se seleccionaron 52 como potenciales y cinco fueron incluidos en esta revisión. Se clasificaron como nivel de evidencia Ib. El topiramato, el aripiprazol, el divalproato y la fluoxetina mostraron mejores resultados que el placebo especialmente en agresividad e impulsividad. El topiramato fue asociado con pérdida de peso. Los medicamentos fueron seguros y bien tolerados. Discusión: Los medicamentos evaluados mostraron ser mejores que placebo. La diversidad en las escalas utilizadas genera complejidad en la interpretación de resultados. Conclusión: La evidencia sugiere que el tratamiento farmacológico es efectivo en síntomas como agresividad e impulsividad comparado con placebo. Deben considerarse estudios que evalúen combinaciones de fármacos y psicoterapia.

Community based ecotourism as a panacea for protected areas: the use of common property theory in its analysis and development

Tourism is the worlds largest employer, accounting for 10% of jobs worldwide (WTO, 1999). There are over 30,000 protected areas around the world, covering about 10% of the land surface(IUCN, 2002). Protected area management is moving towards a more integrated form of management, which recognises the social and economic needs of the worlds finest areas and seeks to provide long term income streams and support social cohesion through active but sustainable use of resources. Ecotourism - 'responsible travel to natural areas that conserves the environment and improves the well- being of local people' (The Ecotourism Society, 1991) - is often cited as a panacea for incorporating the principles of sustainable development in protected area management. However, few examples exist worldwide to substantiate this claim. In reality, ecotourism struggles to provide social and economic empowerment locally and fails to secure proper protection of the local and global environment. Current analysis of ecotourism provides a useful checklist of interconnected principles for more successful initiatives, but no overall framework of analysis or theory. This paper argues that applying common property theory to the application of ecotourism can help to establish more rigorous, multi-layered analysis that identifies the institutional demands of community based ecotourism (CBE). The paper draws on existing literature on ecotourism and several new case studies from developed and developing countries around the world. It focuses on the governance of CBE initiatives, particularly the interaction between local stakeholders and government and the role that third party non-governmental organisations can play in brokering appropriate institutional arrangements. The paper concludes by offering future research directions."

Covariance functions for body weight from birth to maturity in Nellore cows

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Genetic parameters of total milk yield and factors describing the shape of lactation curve in dairy buffaloes

The objective of this study was to apply factor analysis to describe lactation curves in dairy buffaloes in order to estimate the phenotypic and genetic association between common latent factors and cumulative milk yield. A total of 31 257 monthly test-day milk yield records from buffaloes belonging to herds located in the state of São Paulo were used to estimate two common latent factors, which were then analysed in a multi-trait animal model for estimating genetic parameters. Estimates of (co)variance components for the two common latent factors and cumulated 270-d milk yield were obtained by Bayesian inference using a multiple trait animal model. Contemporary group, number of milkings per day (two levels) and age of buffalo cow at calving (linear and quadratic) as covariate were included in the model as fixed effects. The additive genetic, permanent environmental and residual effects were included as random effects. The first common latent factor (F1) was associated with persistency of lactation and the second common latent factor (F2) with the level of production in early lactation. Heritability estimates for Fl and F2 were 0.12 and 0.07, respectively. Genetic correlation estimates between El and F2 with cumulative milk yield were positive and moderate (0.63 and 0.52). Multivariate statistics employing factor analysis allowed the extraction of two variables (latent factors) that described the shape of the lactation curve. It is expected that the response to selection to increase lactation persistency is higher than the response obtained from selecting animals to increase lactation peak. Selection for higher total milk yield would result in a favourable correlated response to increase the level of production in early lactation and the lactation persistency.