Internal adaptation of cast titanium crowns

As the adaptation of titanium crowns obtained by Rematitan Plus investment, specific for titanium, is not recognized to be suitable, this study evaluated the effect of the concentration of the specific liquid and the temperature of the mold of investments on the internal misfit of crowns cast on commercially pure titanium. Individual dies of epoxy resin were obtained, representing teeth prepared for full-crown restoration with a 6-degree axial surface convergence angle and shoulder (1.0 mm). For the waxing of each crown, a ring-shaped stainless steel matrix (8.0mm internal diameter; 7.5 mm height) was adapted above the individual dies of epoxy resin. The Rematian Plus investment was mixed according to the manufacturer's instructions using two different concentrations of the specific liquid: 100%, 75%. Casting was performed in a Discovery Plasma Ar-arc vacuum-pressure casting machine with molds at temperatures of 430°C, 515°C and 600°C. The crowns were cleaned individually in a solution (1% HF + 13% HNO3) for 10 min using a ultrasonic cleaner, with no internal adaptations, and luted with zinc phosphate cement under a 5 kg static load. The crown and die assemblies were embedded in resin and sectioned longitudinally. The area occupied by cement was observed using stereoscopic lens (10X) and measured by the Leica Qwin image analysis system (mm2). The data for each experimental condition (n=8) were analyzed by Kruskal-Wallis non-parametric test (á=0.05). The results showed that liquid dilution and the increase in mold temperature did not significantly influence the levels of internal fit of the cast titanium crowns. The lowest means (±SD) of internal misfit were obtained for the 430°C/100%: (7.25 mm2 ±1.59) and 600°C/100% (8.8 mm2 ±2.25) groups, which presented statistically similar levels of internal misfit.

Diametral tensile strength of dual-curing resin cements submitted exclusively to autopolymerization.

OBJECTIVES: To evaluate, at different times, the diametral tensile strength (DTS) of dual-curing resin cements that were not photopolymerized. METHOD AND MATERIALS: Equal amounts of base and catalyst pastes of Panavia F (Kuraray), Variolink II (Vivadent), Rely X (3M ESPE), and Enforce (Dentsply) were mixed and inserted into cylindrical molds (4 x 2 mm) (n = 10). Cements were not photopolymerized. DTS test was performed in a testing machine at 30 minutes, 1 hour, 24 hours, and 7 days. The specimens were stored in light-proof containers with distilled water at 37 degrees C until the time of assay. An autopolymerizing resin cement (Cement-It, Jeneric Pentron) and a zinc phosphate cement served as controls. One-way analysis of variance (ANOVA) and Tukey test were performed separately for each cement and for each time (P <.05). RESULTS: All cements showed an increase in DTS when tested at 1 and 24 hours. Tests at 24 hours and 7 days revealed no statistically significant differences. In all groups, the zinc phosphate cement had the lowest DTS mean values (2.1 MPa, 3.6 MPa, 6.5 MPa, and 6.9 MPa), while Cement-It (35.1 MPa, 33.6 MPa, 46.9 MPa, and 46.3 MPa) and Enforce (31.9 MPa, 31.7 MPa, 43.4 MPa, and 47.6 MPa) presented the highest DTS mean values. CONCLUSION: All cements presented maximal strength at 24 hours. The dual-curing resin cements, even when nonphotopolymerized, demonstrated higher DTS than the zinc phosphate cement and similar or lower values than the autopolymerizing resin cement.

A new permian bivalve (Megadesmidae, Plesiocyprinellinae) from the Serrinha member, Rio do Rasto Formation, Paraná Basin, Brazil

During a recent inspection in the Paleontological Collection of the Institute of Geosciences, University of São Paulo, we have identifi ed some specimens of undescribed mollusk bivalves. These called our attention for the following reasons: a) all specimens are internal molds of conjugated and closed articulated valves, some of them presenting fragments of silicifi ed shells; b) all internal molds have similar general shape and internal characters, representing specimens of the same taxon; c) the internal molds and silicifi ed valves are well preserved, including fragile structures, which are hardly preserved, such as the internal mold of the external ligament and muscle scars; d) and equally important, according to the labels of all specimens, they were collected from rocks of the Passa Dois Group (Permian), Serrinha Member of the Rio do Rasto Formation. Although who collected the shells and the precise geographic location of the specimens are still unknown, the detailed study of these fossils brings us to the conclusion that they are morphologically distinct from any heretofore published genus of the endemic fauna of bivalves from Passa Dois Group. Based in its general shape, hinge structure and muscles scars, the new form can be classifi ed under the Family Megadesmidae Vokes, 1967, the most diverse group of Permian bivalves of the Paraná Basin. The specimens are referred as Beurlenella elongatella new gen. and sp. The shell shape and taphonomy indicate that this bivalve was a shallow, rapid, active burrower, suspension feeder, probably preserved in situ, in event deposits.

Othonella araguaiana (Bivalvia, Megadesmidae) from the Corumbataí formation (Midlle Permian), eastern margin of the Paraná Basin: Systematic, evolutionary and biostratigraphic significances

In this study, the occurrence of Othonella araguaiana Mendes, a rare bivalve species is reported for the fi rst time in the Pinzonella illusa biozone, Middle Permian Corumbataí Formation, in the State of São Paulo. This species was originally described in coeval rocks of the Estrada Nova Formation (= Corumbataí) from the Alto Araguaia and Alto Garças regions, State of Mato Grosso. The specimens of O. araguaiana were found in the base of a bioclastic sandstone bed, a proximal tempestite, in the middle of the Corumbataí Formation, in the city of Rio Claro, São Paulo State. The silicifi ed shells and internal molds are well preserved, showing impressions of muscle scars and other internal anatomic characters (e.g., hinge), never illustrated by previous authors. In his original description, Mendes (1963) called attention to the similarity between O. araguaiana and Terraia aequilateralis, a common veneroid of the Corumbataí Formation. Conversely, Runnegar and Newell (1971) suggested that O. araguaiana belongs to Megadesmidae, being a junior synonym of Plesiocyprinella carinata (the commonest megadesmid of the Passa Dois Group). Our study indicates that O. araguaiana is indeed a megadesmid, but is distinct from the P. carinata. The new occurrence of O. araguaiana demonstrates that a) the paleobiogeographic distribution of this species is wider than previously thought (that it was restricted to the northern part of Paraná Basin, Mato Grosso State); b) the molluscan fauna of the Corumbataí Formation (P. illusa biozone) in the State of São Paulo is more diverse and dominated by megadesmids; and c) the composition of the molluscan fauna of the Corumbataí Formation in Alto Garças, State of Mato Grosso, is essentially the same as that of the P. illusa biozone of the eastern margin of the Paraná Basin.

Evaluating the bonding of two adhesive systems to enamel submitted to whitening dentifrices.

The aim of this study was to evaluate by micro-shear bond strength test, the bond strength of composite resin restoration to enamel submitted to whitening dentifrices. Forty bovine teeth were embedded in polystyrene resin and polished. The specimens were randomly divided into eight groups (n=5), according to the dentifrice (carbamide peroxide, hydrogen peroxide and conventional dentifrice) and the adhesive system (Prime & Bond 2.1 and Adper Single Bond 2). Dentifrice was applied for 15 minutes a day, for 21 days. Thirty minutes after the last exposure to dentifrice, the samples were submitted to a bonding procedure with the respective adhesive system. After that, four buttons of resin were bonded in each sample using transparent cylindrical molds. After 24 hours, the teeth were submitted to the micro-shear bond strength test and subsequent analysis of the fracture mode. Data were submitted to analysis of variance and Fisher's PLSD test (alpha = 0.05). The micro-shear bond strength showed no difference between adhesives systems but a significant reduction was found between the control and carbamide groups (p = 0.0145) and the control and hydrogen groups (p = 0.0370). The evaluation of the failures modes showed that adhesive failures were predominant. Cohesive failures were predominant in group IV The use of dentifrice with peroxides can decrease bonding strength in enamel.

Effectiveness of three solvents and two associations of solvents on gutta-percha and Resilon

This study evaluated the effectiveness of 3 solvents (Citrol orange oil, Eucalyptol and Tetrachloroethylene) and 2 associations of solvents (Citrol orange oil+Tetrachloroethylene and Eucalyptol+Tetrachloroethylene) on 3 types of gutta-percha (conventional, thermoplastic and EndoREZ) and Resilon. Ten discs (10 mm diameter x 1 mm thick) from each material were prepared using standard metallic molds. Each specimen was weighed to determinate its initial mass. The specimens were immersed in the solvents for 10 min, followed by immersion in distilled water for 20 min, and were then reweighed to obtain the final mass. The mean weight loss determined the solvent capacity. Data were analyzed by ANOVA and Tukey's test at 5% significance level. Tetrachloroethylene was the most effective on conventional gutta-percha (p<0.05). Tetrachloroethylene was also the most effective on thermoplastic gutta-percha, but it was not significantly different (p>0.05) from Eucalyptol+Tetrachloroethylene, Citrol+Tetrachloroethylene, and Citrol. All solvents and associations presented little effectiveness on Resilon. The association Eucalyptol+Tetrachloroethylene was the most effective on EndoREZ, but it did not differ significantly (p>0.05) from Citrol+Tetrachloroethylene and Tetrachloroethylene. All evaluated substances presented solvent action. Tetrachloroethylene improved the effectiveness of both Citrol and Eucalyptol.

Estudo da mcrobiota fúngica gastrintestinal de morcegos (Mammalia, Chiroptera) da região noroeste do estado de São Paulo: Potencial zoonótico

Bats are hosts of a rich diversity of microorganisms. Many studies indicate a close link between bats and fungi with pathogenic potential, especially for living in environments such as caves, caverns and hollow trees, favorable to the maintenance and spread of fungi. The objective was to study the gastrointestinal mycoflora of bats. Of the 98 samples belonging to 11 species of bats coming from 15 studied cities, 20% of the species were Carollia perspicillata, 19% Artibeus lituratus, 17% Molossus rufus, 13% Glossophaga soricina, 9% Nyctinomops macrotis, 8% Molossus molossus, 7% Desmodus rotundus, 2% Lasiurus ega and 1% Eptesicus furinalis, Myotis nigricans and Tadarida brasiliensis. The genus Aspergillus sp. was isolated from 29% of the samples, followed by 6% Microsporum sp. and Penicillium sp. 4% Trichophyton sp. and zygomycetes and 2% Fusarium sp. Of yeast species, 14% were from Rhodotorula sp., 10% Candida sp. and 2% Cryptococcus sp., 22% of isolates remained unidentified. All 82 cultures of organs were negative for Histoplasma capsulatum. There was a statistically significant association between the results of microbiological culture and bat species (p < 0.05). We conclude that the bats can act as disperser agents of fungi with pathogenic potential, although other studies should be performed to establish strategies to identify the main factors correlated with the growth and spread of microorganisms in nature and implication of bats in the epidemiological cycle.

Microbiological quality of organic and conventional vegetables sold in Brazil

While searching for healthier diets, people became more attentive to organic produce. Yet, organic foods may be more susceptible to microbiological contamination because of the use of organic fertilizers, a possible source of pathogenic bacteria. In this study, 130 samples of different organic and conventional vegetable varieties sold in Brazil were analyzed for mesophilic aerobic bacteria, yeasts and molds, total coliforms, Escherichia coli and Salmonella spp. Most of the mesophilic aerobic bacteria counts in organic and conventional vegetables ranged from 6 to 7 log10 CFU/g; most of the yeasts and molds counts ranged from 5 to 6 log10 CFU/g and most of the total coliforms counts ranged from 4 to 5 log10 CFU/g. E. coli was found in 41.5% of the organic and 40.0% of the conventional vegetables, and most samples had counts ranging from 1 to 2 log10 CFU/g. Salmonella spp. was not found in any sample. Comparative analyses of the microbial counts of organic and conventional vegetables showed that some organic varieties have greater counts. However, the global results show that this is not a trend. These results indicate the need of good farming practices, and proper sanitization before consumption, to ensure food quality and safety. © 2012 Elsevier Ltd.

Tafonomia dos Pygocephalomorpha (Crustacea, Peracarida, Malacostraca), Permiano, Bacia do Paraná, Brasil, e seu significado paleoambiental

Taphonomy of the pygocephalomorpha (Crustacea, Peracarida, Malacostraca), Permian, Paraná Basin, Brazil, and its paleoenvironmental meaning. Crustaceans (Pygocephalomorpha, Peracarida) are the main fossil invertebrates recorded in the Early Permian Assistência Formation, Irati Subgroup, State of São Paulo, Paraná Basin. For this study, samples taken from the base of the Ipeúna Member, Bairrinho Bed, State of São Paulo, were analyzed and complemented by fossils from the Irati Formation, State of Rio Grande do Sul. The taphonomic spectrum of the pygocephalomorphs includes three main preservational modes: Type 1. Complete pygocephalomorphs (with outstretched or flexed abdomen), which are associated to cream-colored mudstones and more commonly to black shales. In rare cases, molds of soft parts are preserved. They suffered rapid burial (hours to days) by mud blankets associated to storm events in anoxic bottoms, below storm wave base with minimum bottom disruption, followed by low rates of background sedimentation; Type 2. Partly articulated (carapace and abdomen, with or without caudal fan and without appendages) pygocephalomorphs, with extended or flexed abdomen, which are present in cream-colored pelites, associated with hummocky cross-stratifications, intercalated with black shales. These may represent individuals or remains lying in the sediment-water interface preserved by rapid burial associated to episodic sedimentation events; Type 3. Disarticulated pygocephalomorphs, with isolated carapaces, abdomen, or abdominal segments. This is the predominant preservational mode in our samples. The skeletal remains can be found isolated or in dense, bioclast-supported concentrations (micro-coquines), representing proximal to distal tempestites. Finally, the extreme preservational quality seen in crustaceans of the Type 1 recorded in black shales, occasionally with molds of soft parts, indicates that the host rocks may represent Konservat-Lagerstätten deposits, as already suggested to coeval occurrences of the Irati Formation in Uruguay. © 2013 by the Sociedade Brasileira de Paleontologia.

Dielectric behavior of epoxy/BaTiO3 composites using nanostructured ceramic fibers obtained by electrospinning

Composite materials made of epoxy resin and barium titanate (BT) electrospun nanostructured fibers were prepared. BT fibers were synthesized from a sol based on barium acetate, titanium isopropoxide, and poly(vinyl pyrrolidone). The fibers were heat-treated at different temperatures and characterized by X-ray diffraction, scanning electron microscopy (SEM), and Raman spectroscopy. Mats of BT fibers heat-treated at 800 C were embedded in epoxy resin into suitable molds. The composites were characterized by SEM, and dielectric measurements were performed by means of dielectric spectroscopy. The dielectric permittivity and dielectric modulus of epoxy resin/BT-fiber composites were measured for two types of samples: with the electrodes parallel and perpendicular to the BT fiber layers. Interestingly, composite samples with electrodes perpendicular to the fiber layers and a BT content as low as 2 vol % led to dielectric permittivities three times higher than that of pure epoxy resin. © 2013 American Chemical Society.

Condições higiênico-sanitárias de alimentos prontos para o consumo servidos em escolas públicas de um município da região noroeste do Estado de São Paulo e perfil de sensibilidade das cepas de Staphylococcus aureus e Escherichia coli isoladas frente a agentes antimicrobianos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aspectos higiênicos-sanitários de vegetais minimamente processados e perfil de resistência das leveduras isoladas frente ao hipoclorito de sódio e ozônio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Qualidade microbiológica e ocorrência de leveduras em polpas congeladas de frutas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Qualidade microbiológica e ocorrência de leveduras em leite pasteurizado tipos A, B e C

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do uso de enzimas proteolíticas na maturação de queijo Prato com teor reduzido de gordura

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)