Spatially resolved diagnostics on a micro atmospheric pressure plasma jet

Despite enormous potential for technological applications, fundamentals of stable non-equilibrium micro-plasmas at ambient pressure are still only partly understood. Micro-plasma jets are one sub-group of these plasma sources. For an understanding it is particularly important to analyse transport phenomena of energy and particles within and between the core and effluent of the discharge. The complexity of the problem requires the combination and correlation of various highly sophisticated diagnostics yielding different information with an extremely high temporal and spatial resolution. A specially designed rf microscale atmospheric pressure plasma jet (µ-APPJ) provides excellent access for optical diagnostics to the discharge volume and the effluent region. This allows detailed investigations of the discharge dynamics and energy transport mechanisms from the discharge to the effluent. Here we present examples for diagnostics applicable to different regions and combine the results. The diagnostics applied are optical emission spectroscopy (OES) in the visible and ultraviolet and two-photon absorption laser-induced fluorescence spectroscopy. By the latter spatially resolved absolutely calibrated density maps of atomic oxygen have been determined for the effluent. OES yields an insight into energy transport mechanisms from the core into the effluent. The first results of spatially and phase-resolved OES measurements of the discharge dynamics of the core are presented.

Atomic oxygen formation in a radio-frequency driven micro-atmospheric pressure plasma jet

Atomic oxygen formation in a radio-frequency driven micro-atmospheric pressure plasma jet is investigated using both advanced optical diagnostics and numerical simulations of the dynamic plasma chemistry. Laser spectroscopic measurements of absolute densities of ground state atomic oxygen reveal steep gradients at the interface between the plasma core and the effluent region. Spatial profiles resolving the interelectrode gap within the core plasma indicate that volume processes dominate over surface reactions. Details of the production and destruction processes are investigated in numerical simulations benchmarked by phase-resolved optical emission spectroscopy. The main production mechanisms are electron induced and hence most efficient in the vicinity of the plasma boundary sheath, where electrons are energized. The destruction is driven through chemical heavy particle reactions. The resulting spatial profile of atomic oxygen is relatively flat. The power dependence of the atomic oxygen density obtained by the numerical simulation is in very good agreement with the laser spectroscopic measurements.

Study of localized damage in composite laminates using micro-macro approach

A robust multiscale scheme referred to as micro–macro method has been developed for the prediction of localized damage in fiber reinforced composites and implemented in a finite element framework. The micro–macro method is based on the idea of partial homogenization of a structure. In this method, the microstructural details are included in a small region of interest in the structure and the rest is modeled as a homogeneous continuum. The solution to the microstructural fields is then obtained on solving the two different domains, simultaneously. This method accurately predicts local stress fields in stress concentration regions and is computationally efficient as compared with the solution of a full scale microstructural model. This scheme has been applied to obtain localized damage at high and low stress zones of a V-notched rail shear specimen. The prominent damage mechanisms under shear loading, namely, matrix cracking and interfacial debonding, have been modeled using Mohr–Coulomb plasticity and traction separation law, respectively. The average stress at the notch has been found to be 44% higher than the average stresses away from the notch for a 90 N shear load. This stress rise is a direct outcome of the geometry of the notch.

Effect of storage on physical-chemical properties and phenolics of sweet cherry from São Julião region.

Effect of storage on physical-chemical properties and phenolics of sweet cherry from São Julião region. A.C. Agulheiro-Santos1, F. Vieira1, D. Gonzalez2, M. Lozano2, V. Palma1, A.E. Rato1 1Universidade de Évora. Instituto de Ciências Agrárias e Ambientais Mediterrânica (ICAAM). 7000 Évora, Portugal. 2Centro de Investigaciones Científicas y Tecnológicas de Extremadura (CICYTEX). Ctra. San Vicente. Finca Santa Engracia. 06071 Badajoz, Spain. Worldwide the consumption of fruit and vegetables is increasing due to the dietary guidelines recommended by nutritionist. Because of their high content on phenols, vitamins, mineral and antioxidants, berry fruits are consumed not only in fresh forms but also as processed and derivative products such as juices, yogurts, jellies and dried fruits. As a high consumed red fruit, sweet cherry has been the focus on some studies, mainly regarding bioactive compounds content. “Sweetheart” cherries from São Julião region (Alentejo, Portugal) from two different production campaigns were kept in different storage conditions in order to evaluate both the environmental and storage effect on some physical-chemical properties and phenolics. Cold conditions - Cold (1 ºC, 95% RH) and modified atmosphere - MA (1 ºC, 95% RH with micro-perforated bags of Pplus®, Sidlaw Packaging, Bristol, UK) were tested. In order to establish the appropriate storage conditions, individual phenolic acids and physical-chemical properties were analysed during two consecutive years. Results show a general decrease on phenolic compounds content between cherries from both years. It is also observed that MA conditions do not affect significantly both phenolics and physical-chemical parameters when compared with Cold conditions. Additionally, it is observed similar behaviour on Cold and MA sweet cherries regarding its pH, total soluble solids content (TSS), titratable acidity (TA) and colour and individual phenols during storage time. Concluding, these results show, as expected, changes between cultivars which may be correlated with the environmental conditions on different years. Keywords: sweet cherry, postharvest, phenols, physical-chemical, storage conditions.

Sources of local knowledge spillover within the Algarve tourism region: evidence to identify a regional innovation system

Tourism sector in Algarve region is the main engine of regional economy. Although frequently, tourism is considered as a low – moderate innovative sector, tourism competitiveness is still highly dependent on specific features of a Regional Innovation Platform, highlighting the crucial importance of knowledge creation and diffusion, learning, cooperative and collaborative interaction that may evolve to a Regional Innovation System (RIS). Studies of Local Knowledge Spillovers have been frequently focused on empirical evidence provided by regions highly related with manufacturing sectors. Considering a case study in Tourism Algarve Region, emphasizing a theoretical character on the analysis of these areas and using a qualitative methodology, the goal of this study was to provide preliminary evidence of the main sources and vehicles of regional knowledge spillovers used by tourism enterprises. Main information has been obtained using primary information collected from 20 interviews over main stakeholders regarding regional private and public sector. Primary information was complemented with secondary information, a deeply and extensive bibliography revision and also statistical information. Results show that, on the one hand, main sources of knowledge used by micro and small tourism enterprises are human resources and formal and informal networks. On the other hand, large tourism companies are weakly related with regional sources using mainly internal company and economic group resources to generate innovation activities. Regional innovation platform shows clear weaknesses on linkages and coordinated initiatives to promote and support innovation performance of firms hampering to increase tourism competitiveness and regional development.

Business micro-location: factors, preferences and indicators to assess the influence factors

The paper presents a study on business micro-location behaviour as well as corresponding factors of influence, conducted in two metropolitan areas, Bucharest-Ilfov (Romania) and Greater Porto (Portugal). By business micro-location we refer to a specific site such as a building or facility, accommodating a business within a small, compact geographical area (e.g. metropolitan area). At this geographical scale, the macroeconomic layer factors were excluded, applicable when discern between regions or countries. The factors derived from location theory and previous empirical studies were surveyed, completing a cross-sectional analysis in order to find out the specific weights of the location factors and preferences, by region and by industry. Based on already established firms’ feedback on location, the specific weights were granted by each industry to the main location factors, types of areas, and types of accommodation facilities. The authors also suggested a model to integrate these results into a Geographical Information System (GIS).

Aquisição por Visão Artificial e Medição Automática de Micro Dureza Vickers

O ensaio de dureza, e mais concretamente o ensaio de micro dureza Vickers, é no universo dos ensaios mecânicos um dos mais utilizados quer seja na indústria, no ensino ou na investigação e desenvolvimento de produto no âmbito das ciências dos materiais. Na grande maioria dos casos, a utilização deste ensaio tem como principal aplicação a caracterização ou controlo da qualidade de fabrico de materiais metálicos. Sendo um ensaio de relativa simplicidade de execução, rapidez e com resultados comparáveis e relacionáveis a outras grandezas físicas das propriedades dos materiais. Contudo, e tratando-se de um método de ensaio cuja intervenção humana é importante, na medição da indentação gerada por penetração mecânica através de um sistema ótico, não deixa de exibir algumas debilidades que daí advêm, como sendo o treino dos técnicos e respetivas acuidades visuais, fenómenos de fadiga visual que afetam os resultados ao longo de um turno de trabalho; ora estes fenómenos afetam a repetibilidade e reprodutibilidade dos resultados obtidos no ensaio. O CINFU possui um micro durómetro Vickers, cuja realização dos ensaios depende de um técnico treinado para a execução do mesmo, apresentando todas as debilidades já mencionadas e que o tornou elegível para o estudo e aplicação de uma solução alternativa. Assim, esta dissertação apresenta o desenvolvimento de uma solução alternativa ao método ótico convencional na medição de micro dureza Vickers. Utilizando programação em LabVIEW da National Instruments, juntamente com as ferramentas de visão computacional (NI Vision), o programa começa por solicitar ao técnico a seleção da câmara para aquisição da imagem digital acoplada ao micro durómetro, seleção do método de ensaio (Força de ensaio); posteriormente o programa efetua o tratamento da imagem (aplicação de filtros para eliminação do ruído de fundo da imagem original), segue-se, por indicação do operador, a zona de interesse (ROI) e por sua vez são identificadas automaticamente os vértices da calote e respetivas distâncias das diagonais geradas concluindo, após aceitação das mesmas, com o respetivo cálculo de micro dureza resultante. Para validação dos resultados foram utilizados blocos-padrão de dureza certificada (CRM), cujos resultados foram satisfatórios, tendo-se obtido um elevado nível de exatidão nas medições efetuadas. Por fim, desenvolveu-se uma folha de cálculo em Excel com a determinação da incerteza associada às medições de micro dureza Vickers. Foram então comparados os resultados nas duas metodologias possíveis, pelo método ótico convencional e pela utilização das ferramentas de visão computacional, tendo-se obtido bons resultados com a solução proposta.

Prédation économique et poursuite des dynamiques micro-conflictuelles au Nord et au Sud Kivu : individus, groupes criminels et entreprises multinationales. L’ouverture du secteur extractif congolais au marché international, un facteur d’échec au processus de paix ?

Cette étude analyse l’impact du processus libéral de paix en République Démocratique du Congo sur la poursuite des violences dans les provinces du Nord et du Sud Kivu. Elle soutient que les dynamiques conflictuelles dans ces deux régions sont entretenues par l’établissement d’un programme de partage de pouvoir (power sharing), inclusif, jumelé à l’application des réformes économiques libérales. En se concentrant sur la réforme du secteur de sécurité et l’harmonisation de la politique nationale (en vue des élections post-conflictuelles de 2006), le processus de paix néglige les enjeux politiques et socio-économiques locaux. Le désengagement de l’État et la libéralisation du secteur minier accentuent le taux de corruption du gouvernement de transition et renforcent l’exploitation illégale des ressources par les groupes armés. Cette recherche soutient que l’implantation massive d’entreprises minières multinationales dans les provinces du Nord et du Sud Kivu aggrave la déformation des tissus socio-économiques locaux, accentue la dépendance des populations aux réseaux de gouvernance informelle et renforce les divers groupes armés présents sur le terrain. Par conséquent, les réformes structurelles menées dans le cadre du processus libéral de paix font perdurer les violences et occasionnent de nouvelles dynamiques conflictuelles localisées autour du contrôle des ressources locales, qu’elles soient d’ordre économique ou politique.

Photoluminescence Studies Of Microwave Assisted Synthesized Zno Micro Structures

ZnO micro particles in the range 0.4-0.6 μm were synthesized by microwave irradiation method. The XRD analysis reveals that the sample is in the wurtzite phase with orientation along the (101) plane. SAED pattern of the sample reveals the single crystalline nature of the micro grains. TEM images show the formation of cylindrical shaped ZnO micro structures with hexagonal faces. The optical phonon modes were slightly shifted in the Raman spectrum,attributed to the presence of various crystalline defects and laser induced local heating at the grain boundaries. A broad transmission profile was observed in the FTIR spectrum from 1550-3400 cm-1 which falls in the atmospheric transparency window region. PL spectrum centered at 500 nm with a broad band in the region 420-570 nm comprised of different emission peaks attributed to transition between defect levels. Various emission levels in the sample were expliained with a band diagram

Barriers Faced By Micro, Small And Medium Enterprises In Raising Finance

Worldwide, Micro, Small and Medium Enterprises (MSMEs) have been accepted as an engine of economic growth and for promoting equitable development. In developing countries including India, Micro, Small and Medium Enterprises sector constitute an important part in its development. In spite of this importance, this sector face number of constraints like absence of adequate and timely supply of bank finance, difficulties in procuring raw materials, marketing and distribution challenges and non availability of suitable technology. Review of literature found that there exists problem in accessing finance from banks and financial institutions and this problem may differ from region to region, between sectors, or between individual enterprises within a sector. This paper tries to identify the various barriers faced by these units in raising finance and also try to identify the various sources of finance other than banks. The study is based upon the primary data collected from the 200 MSMEs owners in Kozhikode District of Kerala. The data has been analysed with the help of percentage. The study attempts to submit some recommendations to enhance the overall credit accessibility to MSMEs sector

Productividad, innovación y uso de tecnologías de información y las comunicaciones (tic) como factores de desarrollo de la micro, pequeña y mediana empresa (mipyme) en Bogotá.

Las TIC han impactado en el funcionamiento de las organizaciones y han aportado a su proceso evolutivo, generando diversos efectos de acuerdo a la función que estas cumplen dentro de la organización. Las TIC como consecuencia se convierten en una estrategia de gestión en un entorno complejo donde permiten alcanzar mejoras en la organización social, la actividad económica, el bienestar y el acceso a la información y el conocimiento. (Cáceres Carrasco & Aceytuno Pérez, 2008)Con el fin de entender los beneficios de las TIC, se deben brindar a los directores herramientas que permitan formular modelos de negocios efectivos de cara a los mercados y enfocadas a la satisfacción de los clientes. Adicionalmente, para las organizaciones el añadir valor, no sólo hace referencia al servicio que están prestando; hay otros factores diferentes al uso de herramientas TIC y la innovación que también son igual de importantes como: los procesos de apoyo, de gestión que se encuentran de fondo y que hacen posible brindar un servicio al mercado, en estos procesos se encuentran aplicaciones de procedimientos amigables y fáciles de articular, temas como la responsabilidad empresarial, relación y comunicación con competidores dentro del mismo sector, es justamente en las relaciones con los clientes, que las TIC y el uso de Internet puede tener incidencia en los modelos de negocios a través de actividades como el comercio electrónico, el mercadeo electrónico, el mercadeo en línea entre otros. Existen investigaciones acerca de estos temas: innovación, TI, pero no se han establecido relaciones entre ellos, debido a su novedad. Diferentes experiencias laborales de los investigadores en el uso de las TIC como herramienta en la organización de información permiten que surja la idea de llevar a cabo este proyecto abarcando la realidad bogotana de las MiPyme. La presente investigación con un enfoque cualitativo hace una revisión bibliográfica, y bajo la mirada teórica se analiza la relación que tienen los factores de desarrollo que se evidenciaron como son la innovación y el uso de herramientas TIC, como variables dependientes de la productividad de las MiPyme en Bogotá, Colombia, involucrando temas que se relacionan con distintos campos como la tecnología, políticas gubernamentales, y economía.

Land administration in a micro-state: the role of land use planning

Land policy in micro-states and the land administration that underpins it is often devised within a legacy framework inherited from a colonial past. Independence has allowed self-determination of the future political direction yet the range, legal framework, institutional structure and administration systems tend to mirror those of ex-colonial powers. Do land policies, administration systems and processes developed to serve large heavily populated countries scale down to serve the requirements of micro-states? The evidence suggests not: many land administration systems in the Caribbean face difficulties due to poor records, unclear title, exploitation of state lands, incomplete or ongoing land reform programmes, irregular or illegal settlement and non-enforced planning regulations. Land matters are typically the responsibility of several government departments and agencies responsible for land titling and registration, cadastral surveying of property interests, physical planning, taxation and financial regulation. Although planning is regarded as a land administration function, organisational responsibility usually rests with local rather than central government in large countries, but in microstates local government may be politically weak, under-resourced or even non-existent. Using a case study approach this paper explores how planning functions are organised in the Caribbean state of St Vincent & the Grenadines in relation to land administration as a whole and compares the arrangement with other independent micro-states in the region.

Avaliação da interação universidade - empresas - governo no desenvolvimento de projetos inovadores no RN por micro e pequenas empresas

Knowledge and innovation were seen as major forces, both for survival, as the acquisition of competitive advantages in the Brazilian economy, as well as adding value to the product as a market differentiator. The Triple Helix model is directed toward the knowledge-based economy. Over the past six years, the Federal Government through the Financier of Studies and Projects ( FINEP ) invested in technological innovation projects, economic subsidies, about U.S. $ 1 billion supporting more than 800 projects with these resources. According to the MCTI , the Northeast, over the years 2000 to 2010 increased spending on Science and Technology (considering the activities of research and development more scientific and related activities) of the State Government in relation to its total revenue In 2000, 0.51% of total revenues were invested in Science & Technology, while in 2010 this figure increased to 1.31%. Among the nine Northeast states, Paraíba is highlighted. In 2000, 0.33% of its total revenues were directed to innovation, reaching 2.04% in 2010, the largest increase in the region while the RN invested 0.24% in 2000 and in 2010 reached the level of 1.42 %. According to IBGE, in the period 2000-2011, the micro and small enterprises surpassed the barrier of 6 million establishments. In 2000, there were 4.2 million establishments while in 2011 were 6.3 million active establishments. Therefore, throughout the period, there was a creation of approximately 2.1 million new establishments. Between 2000 and 2011, micro and small businesses have created 7.0 million formal jobs, 8.6 million jobs in 2000 to 15.6 million in 2011. This scenario shows the importance of this study in relation to the investment of governments in RD & I in micro and small enterprises. This study aims to analyze the interaction Universities - Business - Government in the development of innovation in micro and small companies in Rio Grande do Norte participants of the edicts of Inova FAPERN. We chose to adopt as a research method case study concerning the procedure of the research, exploratory, descriptive, and on documents with engineers and researchers of innovation projects approved by PAPPE Subsidy (Inova -RN I, II and III). Data collection was done through the report made by FAPERN entitled: " Evaluation of companies financed and supported by the Grant Program for Technological Innovation for Micro and Small Enterprises RN - INOVA -RN " (2010) and a questionnaire with 40 closed questions and 1 opened to 30 affirmative composed based on a 5-point Likert scale. The analysis of data was qualitative and quantitative. The study provided to identify the importance and barriers arising from the relation between Government Enterprise (micro and small) and University as essential to the economic development of the region. It was also identified that, in the innovation projects, 70% of the goods or services originating from research were to market these, 50% resulted in a patent for the company and 80% publications of scientific articles

Estudo da reidratação do feijão verde (Vigna unguiculata L. Walp) desidratado por micro-ondas com e sem pré-tratamento osmótico

The green bean has organoleptic and nutritional characteristics that make it an important food source in tropical regions such as the Northeast of Brazil. It is a cheap source of protein and important for nutrition of rural population contributing significantly in subsistence farming of the families from Brazil s northeast. It is consumed in entire region and together with the dry meat and other products composes the menu of typical restaurants, being characterized as an important product for economy of Northeast. The green bean is consumed freshly harvested and has short cycle, being characterized as a very perishable food, which hampers your market. The drying method is an alternative to increase the lifetime and provide a reduction volume of this product making easier your transportation and storage. However is necessary to search ways of drying which keep the product quality not only from the nutritional standpoint but also organoleptic. Some characteristics may change with the drying process such as the coloring, the rehydration capacity and the grains cooking time. The decrease of drying time or of exposure of the grains to high temperature minimizes the effects related with the product quality loss. Among the techniques used to reduce the drying time and improve some characteristics of the product, stands out the osmotic dehydration, widely used in combined processes such as the pretreatment in drying food. Currently the use of the microwaves has been considered an alternative for drying food. The microwave energy generates heat inside of materials processed and the heating is practically instantaneous, resulting in shorter processing times and product quality higher to that obtained by conventional methods. Considering the importance of the green beans for the Northeast region, the wastefulness of production due to seasonality of the crop and your high perishability, the proposal of this thesis is the study of drying grain by microwaves with and without osmotic pretreatment, focusing on the search of conditions of processes which favor the rehydration of the product preserving your organoleptic characteristics. Based on the analysis of the results of osmotic dehydration and dielectric properties was defined the operating condition to be used in pretreatment of the green bean, with osmotic concentration in saline solution containing 12,5% of sodium chloride, at 40°C for 20 minutes. The drying of green bean by microwave was performed with and without osmotic pretreatment on the optimized condition. The osmotic predehydration favored the additional drying, reducing the process time. The rehydration of dehydrated green bean with and without osmotic pretreatment was accomplished in different temperature conditions and immersion time according to a factorial design 22, with 3 repetitions at the central point. According to results the better condition was obtained with the osmotically pretreated bean and rehydrated at a temperature of 60°C for 90 minutes. Sensory analysis was performed comparing the sample of the green bean in natura and rehydrated in optimized conditions, with and without osmotic pretreatment. All samples showed a good acceptance rate regarding the analyzed attributes (appearance, texture, color, odor and taste), with all values above 70%. Is possible conclude that the drying of green bean by microwave with osmotic pretreatment is feasible both in respect to technical aspects and rehydration rates and sensory quality of the product

Aplicação e análise de metodologia de deterioração ambiental em micro-bacia do seridó potiguar

In the contemporary world to the deterioration of semi-arid areas of the planet has been the focus of media attention and the scientific community. Brazil has a semiarid, considered the most problematic of the world, either by pressure from physical factors, whether as a result of misguided public policies, has over time been suffering from the consequences of a deterioration that expands over the years. Methodologies, that amidst the problems of semi-arid, come against the deteriorating local, have a good chance to be reapplied in other contexts around the world. This research, based on methodological model for analyzing environmental deterioration, introduced and examined the applicability of the methodology in the semi-arid region of Rio Grande do Norte - Brazil. Although the results provide guidelines for the introduction of underground dams, the application of the methodology was ineffective, given the high rates of forest cover that gave low values for the physical diagnosis conservationist