Femoral versus Radial Access in Primary Angioplasty. Analysis of the ACCEPT Registry

Background:The radial access provides a lower risk of bleeding and vascular complications related to the puncture site in comparison to the femoral access. Recent studies have suggested a reduction in mortality associated with the radial access in patients with acute myocardial infarction undergoing percutaneous coronary intervention.Objective:To compare the occurrence of adverse cardiovascular ischemic and hemorrhagic events in patients undergoing primary angioplasty according to the type of arterial access route.Methods:From August 2010 to December 2011, 588 patients undergoing primary percutaneous coronary intervention during acute ST-segment elevation myocardial infarction were assessed; they were recruited from 47 centers participating in the ACCEPT registry. Patients were grouped and compared according to the arterial access used for the procedure.Results:The mean age was 61.8 years; 75% were males and 24% had diabetes mellitus. There was no difference between groups as regards the procedure success rate, as well as regards the occurrence of death, reinfarction, or stroke at six months of follow-up. Severe bleeding was reported in 1.1% of the sample analyzed, with no statistical difference related to the access used.Conclusions:The femoral and radial accesses are equally safe and effective for the performance of primary percutaneous coronary intervention. The low rate of cardiovascular events and of hemorrhagic complications reflects the quality of the participating centers and the operators expertise with the use of both techniques.

Evaluation of prenatal ultrasound diagnosis of fetal abdominal wall defects by 19 European registries.

OBJECTIVES: To evaluate the current effectiveness of routine prenatal ultrasound screening in detecting gastroschisis and omphalocele in Europe. DESIGN: Data were collected by 19 congenital malformation registries from 11 European countries. The registries used the same epidemiological methodology and registration system. The study period was 30 months (July 1st 1996-December 31st 1998) and the total number of monitored pregnancies was 690,123. RESULTS: The sensitivity of antenatal ultrasound examination in detecting omphalocele was 75% (103/137). The mean gestational age at the first detection of an anomaly was 18 +/- 6.0 gestational weeks. The overall prenatal detection rate for gastroschisis was 83% (88/106) and the mean gestational age at diagnosis was 20 +/- 7.0 gestational weeks. Detection rates varied between registries from 25 to 100% for omphalocele and from 18 to 100% for gastroschisis. Of the 137 cases of omphalocele less than half of the cases were live births (n = 56; 41%). A high number of cases resulted in fetal deaths (n = 30; 22%) and termination of pregnancy (n = 51; 37%). Of the 106 cases of gastroschisis there were 62 (59%) live births, 13 (12%) ended with intrauterine fetal death and 31 (29%) had the pregnancies terminated. CONCLUSIONS: There is significant regional variation in detection rates in Europe reflecting different policies, equipment and the operators' experience. A high proportion of abdominal wall defects is associated with concurrent malformations, syndromes or chromosomal abnormalities, stressing the need for the introduction of repeated detailed ultrasound examination as a standard procedure. There is still a relatively high rate of elective termination of pregnancies for both defects, even in isolated cases which generally have a good prognosis after surgical repair.

Impacte de les tecnologies de la informació i la comunicació en l’Administració de justícia: modernització i eficiència

L’Administració de Justícia, com servei públic que ha de donar als ciutadans una eficaç resolució dels conflictes, ha de comptar per al correcte compliment de la seva funció institucional, amb una sèrie de mitjans, no tan sols personals i materials, sinó també tecnològics, que li permetin assegurar la consecució de les seves finalitats. Per tant, es precisa una Administració oberta i transparent, caracteritzada per l’efectivitat i per la seva proximitat al ciutadà. La introducció de les TIC en l’Administració de Justícia és un procés bastant recent i encara no tancat, si es compara amb la resta del sector públic, especialment d’altres àmbits de l’Administració molt més avançats en la incorporació de les TIC, com són el tributari i el de la Seguretat Social. No obstant això, avui en dia, on majors èxits s’han assolit en aquest camp en l’Administració de Justícia és en el de la seva utilització interna: informatització interna, gestió interna dels procediments, intranets, etc. Per això, on queda un llarg camí per recórrer encara és en el camp de les relacions telemàtiques entre Administració de Justícia i els operadors jurídics, però especialment amb els ciutadans. D’altra banda, el legislador és sensible cada vegada més a aquest tema i s’ha preocupat de regular determinats aspectes on les TIC incideixen en l’àmbit de la justícia: actuacions dels procuradors, advocats, notificacions telemàtiques, el valor del document electrònic en el procés judicial... Així queda reflectit, per exemple, a la Llei Orgànica del Poder Judicial o la Llei d’Enjudiciament Civil. No obstant això, de lege ferenda, seria convenient l’existència d’un marc normatiu únic regulador de l’aplicació de les TIC en la Justícia. Així mateix, també ha d’assenyalar-se que en el procés institucional d’introducció de les noves tecnologies en la Justícia alguns dels acords adoptats així com les previsions contingudes en la normativa aplicable, no deixen de ser en la majoria dels casos simplement programàtics.

The Recirculator, Vol. 65, No. 1, April 2009.

News for swimming pool and spa operators, mangers, and inspectors.

The Recirculator, Vol. 65, No. 2, September 2009.

News for swimming pool and spa operators, mangers, and inspectors.

The Recirculator, Vol. 65, No. 3, December 2009.

News for swimming pool and spa operators, mangers, and inspectors.

The Recirculator, Vol. 66, No. 1, March 2010.

News for swimming pool and spa operators, mangers, and inspectors.

The Recirculator, Vol. 66, No. 2, October 2010.

News for swimming pool and spa operators, mangers, and inspectors.

The Recirculator, Vol. 64, No. 3, December 2008.

News for swimming pool and spa operators, mangers, and inspectors.

The Recirculator, Vol. 66, No. 3, December 2010.

News for swimming pool and spa operators, mangers, and inspectors.

A multilevel multiscale finite volume method

The Multiscale Finite Volume (MsFV) method has been developed to efficiently solve reservoir-scale problems while conserving fine-scale details. The method employs two grid levels: a fine grid and a coarse grid. The latter is used to calculate a coarse solution to the original problem, which is interpolated to the fine mesh. The coarse system is constructed from the fine-scale problem using restriction and prolongation operators that are obtained by introducing appropriate localization assumptions. Through a successive reconstruction step, the MsFV method is able to provide an approximate, but fully conservative fine-scale velocity field. For very large problems (e.g. one billion cell model), a two-level algorithm can remain computational expensive. Depending on the upscaling factor, the computational expense comes either from the costs associated with the solution of the coarse problem or from the construction of the local interpolators (basis functions). To ensure numerical efficiency in the former case, the MsFV concept can be reapplied to the coarse problem, leading to a new, coarser level of discretization. One challenge in the use of a multilevel MsFV technique is to find an efficient reconstruction step to obtain a conservative fine-scale velocity field. In this work, we introduce a three-level Multiscale Finite Volume method (MlMsFV) and give a detailed description of the reconstruction step. Complexity analyses of the original MsFV method and the new MlMsFV method are discussed, and their performances in terms of accuracy and efficiency are compared.

MEPDG Work Plan Task No. 5: Characterization of Unbound Materials (Soils/Aggregates) for Mechanistic-Empirical Pavement Design Guide, 2009

The resilient modulus (MR) input parameters in the Mechanistic-Empirical Pavement Design Guide (MEPDG) program have a significant effect on the projected pavement performance. The MEPDG program uses three different levels of inputs depending on the desired level of accuracy. The primary objective of this research was to develop a laboratory testing program utilizing the Iowa DOT servo-hydraulic machine system for evaluating typical Iowa unbound materials and to establish a database of input values for MEPDG analysis. This was achieved by carrying out a detailed laboratory testing program designed in accordance with the AASHTO T307 resilient modulus test protocol using common Iowa unbound materials. The program included laboratory tests to characterize basic physical properties of the unbound materials, specimen preparation and repeated load triaxial tests to determine the resilient modulus. The MEPDG resilient modulus input parameter library for Iowa typical unbound pavement materials was established from the repeated load triaxial MR test results. This library includes the non-linear, stress-dependent resilient modulus model coefficients values for level 1 analysis, the unbound material properties values correlated to resilient modulus for level 2 analysis, and the typical resilient modulus values for level 3 analysis. The resilient modulus input parameters library can be utilized when designing low volume roads in the absence of any basic soil testing. Based on the results of this study, the use of level 2 analysis for MEPDG resilient modulus input is recommended since the repeated load triaxial test for level 1 analysis is complicated, time consuming, expensive, and requires sophisticated equipment and skilled operators.

Interlaboratory Study to Determine the Precision of the MIT Scan T2 for PCC Pavement Thickness, MLR 14-01, 2015

The MIT Scan T2 device has been implemented in Iowa as a new method for determining PCC pavement thickness compliance. The T2 device utilizes a magnetic pulse induction technology to measure the distance from a sensor to a metal target. The objective of this project was to conduct an interlaboratory study (ASTM C802) to determine the precision of the test.Fifteen MIT Scan T2 gauges and fifteen operators performed testing on three reference platforms and nine pavement locations of varying thicknesses. The testing was conducted on October 29, 2014 at two sites near Ames, Iowa. Usable data was obtained from every operator at all locations.

Transit Assistance Program for Iowa, 1975

This inventory of transit services in Iowa covers urban transit, intercity passenger bus carriers and charter operators, taxicab operations, rural transit services and special services, and includes the results of questionnaire and interview surveys, and the resulting recommendations. The recommendations urge a centralized source of data and expertise, a public information program, the utilization of federal aid, the continuance of existing transit services with no dimunition of service level, the establishment of new services in communities of over 20,000 population, the sponsorship of demonstrations in communities with populations of 10,000 to 20,000, and the development and improvement of rural transit service. Based on state and local community experience, recommendations are made concerning revenue sources to support transit in Iowa, and four alternative state transit assistance programs are presented.

The Role of Third-Party Service Provider in B2B Integration

Sähköisen kaupankäynnin kasvun myötä, itsenäisten yritysten tietojärjestelmien integraation tarve on moninkertaistunut viime vuosien aikana. Yritykset ovat huomanneet, että tilaus-toimitusketjun automatisointiin tähtäävällä kokonaisvaltaisella integraatio-ratkaisulla on mahdollista päästä kattaviin kustannussäästöihin sekä tulojen kasvuun. Pääsääntöisesti yritykset kuitenkin etenevät hitaammin, integroimalla aluksi pienempiä liiketoiminnan tietojärjestelmien toimintoja. Positiivisten kokemusten perusteella yritykset ovat valmiitalaajentamaan sähköisen kaupankäynnin automatisointia myös muissa toiminnoissa. Tässä työssä keskitytään tarkastelemaan eri lähestymistapojayritystenvälisen integraation toteuttamiseen, sekä analysoimaan eri keinojen liiketoiminnallisia ja teknisiä vaikutuksia. Työ on tehty yhteistyössä UPM-KymmeneWood Oy:n kanssa, jonka tavoitteena oli saada perusteelliset tiedot yrityksenvälisestä integraatiosta ja syventää tietoja sekä integraatio-palveluita tarjoavien kolmansien osapuolten toimintatavoista että heidän tarjoamista palveluista ja niiden käyttökelpoisuudesta puutuoteteollisuudessa toimivassa yrityksessä. Käytännön osuudessa on tarkemmin esitelty integraatio-palveluita tarjoavien operaattoreiden kanssa käytyjen palaverien sekä heidän toimittamien materiaalien perusteella tehdyn tutkimustyön tuloksia, sisältäen yksityiskohtaiset kuvaukset yritystenvälisen integraation mahdollistavista palveluista.