Carbon Nanotubes-Reinforced PET Nanocomposite by Melt-Compounding

Poly(ethylene terephthalate) (PET) nanocomposites with single-walled carbon nanotubes (SWNTs) have been prepared by a simple melt compounding method. With increasing concentration (0-3 wt %) of SWNTs, the mechanical and dynamic mechanical properties improved, corresponding to effective reinforcement. Melt rheological characterization indicated the effective entanglements provided by SWNTs in the melt state as well. Thermogravimetric analysis suggested no influence of SWNTs on the thermal stability of PET. Electrical conductivity measurements on the composite films pointed out that the melt compounded SWNTs can result in electrical percolation albeit at concentrations exceeding 2 wt %.

Short Nylon Fibre Reinforced PP: Melt Rheology

Short fiber reinforced thermoplastics have generated much interest these days since fibrous materials tend to increase both mechanical and thermal properties, such as tensile strength, flexural strength, flexural modulus, heat deflection temperature, creep resistance, and some times impact strength of thermoplastics. If the matrix and reinforcement are both based on polymers the composite are recyclable. The rheological behavior of recyclable composites based on nylon fiber reinforced polypropylene (PP) is reported in this paper. The rheological behavior was evaluated both using a capillary rheometer and a torque rheometer. The study showed that the composite became pseudoplastic with fiber content and hence fiber addition did not affect processing adversely at higher shear rates. The torque rheometer data resembled that obtained from the capillary rheometer. The energy of mixing and activation energy of mixing also did not show much variation from that of PP alone.

Novel Melt Transurethane Process for Cycloaliphatic Polyurethanes and Their Self-Organization for Nano-Materials

In this introduction part, importance has been given to the elastomeric properties of polyurethanes. Emphasis has been laid to this property based on microphase separation and how this could be modified by modifying the segment lengths, as well as the structure of the segments. Implication was also made on the mechanical and thermal properties of these copolymers based on various analytical methods usually used for characterization of polymers. A brief overview of the challenges faced by the polyurethane chemistry was also done, pointing to the fact that though polyurethane industry is more than 75 years old, still a lot of questions remain unanswered, that too mostly in the synthesis of polyurethanes. A major challenge in this industry is the utilization of more environmental friendly “Green Chemistry Routes” for the synthesis of polyurethanes which are devoid of any isocyanates or harsh solvents.The research work in this thesis was focused to develop non-isocyanate green chemical process for polyurethanes and also self-organize the resultant novel polymers into nano-materials. The thesis was focused on the following three major aspects:(i) Design and development of novel melt transurethane process for polyurethanes under non-isocyanate and solvent free melt condition. (ii) Solvent induced self-organization of the novel cycloaliphatic polyurethanes prepared by the melt transurethane process into microporous templates and nano-sized polymeric hexagons and spheres. (iii) Novel polyurethane-oligophenylenevinylene random block copolymer nano-materials and their photoluminescence properties. The second chapter of the thesis gives an elaborate discussion on the “Novel Melt Transurethane Process ” for the synthesis of polyurethanes under non-isocyanate and solvent free melt condition. The polycondensation reaction was carried out between equimolar amounts of a di-urethane monomer and a diol in the presence of a catalyst under melt condition to produce polyurethanes followed by the removal of low boiling alcohol from equilibrium. The polymers synthesized through this green chemical route were found to be soluble (devoid of any cross links), thermally stable and free from any isocyanate entities. The polymerization reaction was confirmed by various analytical techniques with specific references to the extent of reaction which is the main watchful point for any successful polymerization reaction. The mechanistic aspects of the reaction were another point of consideration for the novel polymerization route which was successfully dealt with by performing various model reactions. Since this route was successful enough in synthesizing polyurethanes with novel structures, they were employed for the solvent induced self-organization which is an important area of research in the polymer world in the present scenario. Chapter three mesmerizes the reader with multitudes of morphologies depending upon the chemical backbone structure of the polyurethane as well as on the nature and amount of various solvents employed for the self-organization tactics. The rationale towards these morphologies-“Hydrogen Bonding ” have been systematically probed by various techniques. These polyurethanes were then tagged with luminescent 0ligo(phenylene vinylene) units and the effects of these OPV blocks on the morphology of the polyurethanes were analyzed in chapter four. These blocks have resulted in the formation of novel “Blue Luminescent Balls” which could find various applications in optoelectronic devices as well as delivery vehicles.

Segregation unter Stagnationsbedingungen

Anlass der Untersuchung sind Verstärkungen von strukturwandel- und globalisierungsbedingten Wandlungen unter Schrumpfungs- und Stagnationsbedingungen. Denn Stagnations- und Schrumpfungstendenzen in einer Region sind selektiv, sie begünstigen über verschiedene Mechanismen Polarisierungen und Marginalisierungen: Die allgemeine Entspannung am Wohnungsmarkt hat erhöhte Mobilität und damit sozialräumliche Segregierungen und Polarisierungen der Wohnungsversorgung zur Folge. Leerstände und ausbleibende Investitionen begünstigen Polarisierungen von baulich-räumlichen Qualitäten. Diese beiden Entwicklungen überlagern sich im Stadtraum und verstärken sich gegenseitig. Dabei verbessert sich die Wohnungsversorgung in den benachteiligten Quartieren kaum, so die Ausgangshypothesen. Die Untersuchung fragt nach den Wirkungen des Nebeneinanders von Wachstums-, Stagnations- und Schrumpfungserscheinungen auf unterschiedlichen Maßstabsebenen, dem Zusammenspiel von sozialstrukturellen und qualitativen Veränderungen der baulich-räumlichen Gegebenheiten in den Quartieren sowie in innerstädtischer Differenzierung. Dabei interessieren besonders die Einflüsse eines regional entspannten Wohnungsmarktes und dessen Folgen für die Verwertungsstrategien im Wohnungsbestand auf Segregationsprozesse und die Wohnungsversorgung. Als Fallbeispiel der Untersuchung dient die Stadt Kassel. Der sozialräumliche Fokus liegt auf drei Typen benachteiligter Quartiere: Neben den in der aktuellen Diskussion zumeist betrachteten gründerzeitlichen Arbeiterquartieren und den Großsiedlungen der 1960/70er Jahre wurden auch die peripheren Geschosswohnungsbausiedlungen der 1950er/60er Jahre in die Untersuchung einbezogen, um den unterschiedlichen Rahmenbedingungen und Wirkungen in den Quartierstypen auf die Spur zu kommen und damit letztlich Grundlagen für stadtentwicklungspolitische Strategien zu erarbeiten. Die kleinräumigen Analysen von sozialräumlicher und baulich-räumlicher Struktur sowie zur Wohnungsversorgung deckten Parallelen und gegenläufige Entwicklungen zwischen den unterschiedlichen Quartierstypen auf; es ergaben sich verschiedene Anhaltspunkte zur Erhärtung der Ausgangsthesen. So wurde z.B. deutlich, dass sich unter den Marktbedingungen stagnierender Städte die Wohnflächenversorgung in den benachteiligten Quartieren kaum verbessert. Hierin zeigt sich ein entscheidender Unterschied zu stark schrumpfenden Städten, in denen sich die Versorgungslage (fast) durchgängig verbessert. Wohnungsmarktbarrieren wirken offensichtlich unter Stagnationsbedingungen für bestimmte Bevölkerungsgruppen weiter. Da sich ihre Wirkung aber für weitere Kreise der Bevölkerung abschwächt, verschärfen sich sozialräumliche Konzentrationen. Vor allem aber wurden Überlagerung und gegenseitige Verstärkung dieser sozialräumlichen mit baulich-räumlichen Polarisierungen deutlich, die vor allem aus stadträumlich konzentrierten Investitionen in den Gebäude- und Wohnungsbestand resultieren. Letztlich zeigt sich damit, dass regulierende Eingriffe nicht nur im Rahmen des Umbaus und der Erneuerung der Quartiere erforderlich sind, sondern insbesondere auch in den Wohnungsmarkt und dies auch bei entspannter regionaler Marktlage. Andernfalls ist weder eine angemessene Wohnungsversorgung aller Bevölkerungsgruppen noch der Zusammenhalt der Stadt(Gesellschaft) zu gewährleisten. Dabei ist die Stadtpolitik permanent mit der Gleichzeitigkeit von (wirtschaftlicher) Standortpolitik und sozialer Stadtentwicklung konfrontiert, die sie im Sinne einer nachhaltigen Entwicklung gegeneinander und miteinander abwägen muss.

Resource dimensioning aspect of heterogeneous traffic with different service requirements: Integration versus segregation

In this paper, we consider the ATM networks in which the virtual path concept is implemented. The question of how to multiplex two or more diverse traffic classes while providing different quality of service requirements is a very complicated open problem. Two distinct options are available: integration and segregation. In an integration approach all the traffic from different connections are multiplexed onto one VP. This implies that the most restrictive QOS requirements must be applied to all services. Therefore, link utilization will be decreased because unnecessarily stringent QOS is provided to all connections. With the segregation approach the problem can be much simplified if different types of traffic are separated by assigning a VP with dedicated resources (buffers and links). Therefore, resources may not be efficiently utilized because no sharing of bandwidth can take place across the VP. The probability that the bandwidth required by the accepted connections exceeds the capacity of the link is evaluated with the probability of congestion (PC). Since the PC can be expressed as the CLP, we shall simply carry out bandwidth allocation using the PC. We first focus on the influence of some parameters (CLP, bit rate and burstiness) on the capacity required by a VP supporting a single traffic class using the new convolution approach. Numerical results are presented both to compare the required capacity and to observe which conditions under each approach are preferred

Social housing and land use planning in Medellin during the period 2006-2011. Steps towards socio economic and residential segregation

This paper presents an approach to the relationship between land use planning and socioeconomic residential segregation, from the location of social housing in Medellin, Colombia, during the period 2006-2011. The first part introduces the land use regulations regarding the location of social housing, identifying ambiguities in the current spatial plan. Next, we present the intersection of  regulatory information and the location of the projects that were under construction during the  study period, highlighting the need to consider the location as an important characteristic of social housing and residential segregation as a phenomenon that must be recognized and worked on land  use planning in our cities.

On the time for fold surfaces to order during the crystallization of polyethylene from the melt and its dependence on molecular parameters

New experiments underpin the interpretation of the basic division in crystallization behaviour of polyethylene in terms of whether or not there is time for the fold surface to order before the next molecular layer is added at the growth front. For typical growth rates, in Regime 11, polyethylene lamellae form with disordered {001} fold surfaces then transform, with lamellar thickening and twisting, towards the more-ordered condition found for slower crystallization in Regime 1, in which lamellae form with and retain {201} fold surfaces. Several linear and linear-low-density polyethylenes have been used to show that, for the same polymer crystallized alone or in a blend, the growth rate at which the change in initial lamellar condition occurs is reasonably constant thereby supporting the concept of a specific time for surfaces to attain the ordered {201}) state. This specific time, in the range from milliseconds to seconds, increases with molecular length, and in linear-low-density polymer, for higher branch contents. (c) 2006 Elsevier Ltd. All rights reserved.

Architectural effect on the surface tension of an ABA triblock copolymer melt

The excess surface energy of lamellae formed by an ABA triblock copolymer melt oriented parallel to a neutral surface is evaluated using self-consistent field theory (SCFT). Consistent with experiments and previous SCFT calculations, we find a preference for the A-rich domains at the surface, which can only be attributed to the architectural asymmetry between the A and B blocks. The behavior was previously attributed to a loss of bridging configurations that occurs when the B-domain resides at the surface. Here we demonstrate that it is actually the presence of chain ends that reduces the excess surface energy of an A-rich domain relative that of a B-rich domain.

Segregation of morphological and isozyme markers in a cross of Capsicum baccatum and Capsicum cardenasii

The genus Capsicum has 20-30 species, of which only a few are cultivated. Capsicum annuum L. is the best known Capsicum all around the world, while the other species are not common outside Latin America. Since it is the best known and commercially the most valuable species, many breeding programs have been conducted on C annuum L., especially on the non-pungent vegetable types. Breeding of other species has received less attention. Therefore, this work was conducted on two species other than C. annuum that are rarely studied-C. baccatum and C. cardenasii. Other results concern linkage groups and association of the marker genes or linkage groups with the chromosomes involved in an interchange. Linkage was detected for two pairs of genes only; these were between Got-1 and Idh-1, and between Pgi-2 and Est-5. No gene was found to show a statistically significant association with chromosomes with interchanged segments.

Melt structure and its transformation by sequential crystallization of the two blocks within poly(L-lactide)-block-poly(epsilon-caprolactone) double crystalline diblock copolymers

Sequential crystallization of poly(L-lactide) (PLLA) followed by poly(epsilon-caprolactone) (PCL) in double crystalline PLLA-b-PCL diblock copolymers is studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM), wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS). Three samples with different compositions are studied. The sample with the shortest PLLA block (32 wt.-% PLLA) crystallizes from a homogeneous melt, the other two (with 44 and 60% PLLA) from microphase separated structures. The microphase structure of the melt is changed as PLLA crystallizes at 122 degrees C (a temperature at which the PCL block is molten) forming spherulites regardless of composition, even with 32% PLLA. SAXS indicates that a lamellar structure with a different periodicity than that obtained in the melt forms (for melt segregated samples). Where PCL is the majority block, PCL crystallization at 42 degrees C following PLLA crystallization leads to rearrangement of the lamellar structure, as observed by SAXS, possibly due to local melting at the interphases between domains. POM results showed that PCL crystallizes within previously formed PLLA spherulites. WAXS data indicate that the PLLA unit cell is modified by crystallization of PCL, at least for the two majority PCL samples. The PCL minority sample did not crystallize at 42 degrees C (well below the PCL homopolymer crystallization temperature), pointing to the influence of pre-crystallization of PLLA on PCL crystallization, although it did crystallize at lower temperature. Crystallization kinetics were examined by DSC and WAXS, with good agreement in general. The crystallization rate of PLLA decreased with increase in PCL content in the copolymers. The crystallization rate of PCL decreased with increasing PLLA content. The Avrami exponents were in general depressed for both components in the block copolymers compared to the parent homopolymers. Polarized optical micrographs during isothermal crystalli zation of (a) homo-PLLA, (b) homo-PCL, (c) and (d) block copolymer after 30 min at 122 degrees C and after 15 min at 42 degrees C.

Variation in acrylamide producing potential in potato: Segregation of the trait in a breeding population

Acrylamide is a neurotoxin and possible carcinogen, and concern has been voiced over human exposure to acrylamide in cooked foods. Processed potato products such as crisps and French fries are often cited as being particularly high in acrylamide. In this manuscript a sub-set of clonal progeny from a specific tetraploid potato breeding population has been assessed for acrylamide forming potential in stored tubers processed into crisps. The clone with the lowest acrylamide content in crisps had both low reducing sugars and asparagine contents. Our data show that, in the segregating breeding population used, both asparagine and reducing sugars levels needed to be taken into account to explain most of the variation in acrylamide and that selection for low levels of both metabolites should be targeted for crop improvement.

Strong-segregation limit of the self-consistent field theory for diblock copolymer melts

The self-consistent field theory (SCFT) introduced by Helfand for diblock copolymer melts is expected to converge to the strong-segregation theory (SST) of Semenov in the asymptotic limit, $\chi N \rightarrow \infty$. However, past extrapolations of the lamellar/cylinder and cylinder/sphere phase boundaries, within the standard unit-cell approximation, have cast some doubts on whether or not this is actually true. Here we push the comparison further by extending the SCFT calculations to $\chi N = 512,000$, by accounting for exclusion zones in the coronae of the cylindrical and spherical unit cells, and by examining finite-segregation corrections to SST. In doing so, we provide the first compelling evidence that SCFT does indeed reduce to SST.