Measuring the impact with the social return on investment: the case of the social innovation HUB

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Reducing Discomfort While Measuring Crown-Heel Length in Neonates

To assess the degree of discomfort caused by length measurement in neonates, performed with one or both lower limbs extended, on the first and second day after birth, with either one or both lower limbs extended. METHODS: Healthy full-term neonates were systematically sampled during the months of February and March 2004. Crown-heel length was measured, using a 1-mm precision neonatometer, at approximately 8 h and 32 h after birth, with one and both lower limbs extended. The Neonatal Facial Coding System was used to assess discomfort during measurements. Data were analysed by parametric and non-parametric tests as appropriate. RESULTS: Whatever the measurement technique, discomfort scores are significantly higher during the length measurement than at baseline. Whenever length measurements are performed, discomfort scores are significantly higher when extending both lower limbs rather than one lower limb (p < 0.006). The measured length is greater with one lower limb extended; however, the difference decreases over time, being 0.19 cm (95% CI 0.1-0.3; p < 0.001) at approximately 32 h of age. No significant differences in length were found between measurements at approximately 8 or 32 h, regardless of the technique used. The best correlation between length measurements with one or both lower limbs extended was observed at approximately 32 h after birth (r = 0.98). CONCLUSION: Measuring crown-heel length is a distressful procedure for the neonate. Measurements with one lower limb extended result in less discomfort than when both lower limbs are extended, without decreasing the accuracy.

A multiagent based shop floor transportation system simulator

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Measuring chromosome-end fusions in fission yeast

Dissertation presented to obtain the Ph.D degree in Molecular Biology

Análise comparativa do impacto das ULS (Unidade Locais de Saúde) e dos ACeS (Agrupamentos de Centros de Saúde) no processo de articulação entre os cuidados de saúde primários e os cuidados de saúde hospitalares

RESUMO - Introdução: O presente trabalho, desenvolvido ao longo dos últimos meses, teve como objetivo analisar comparativamente o impacto das Unidades Locais de Saúde e dos Agrupamentos de Centros de Saúde no processo de articulação entre cuidados de saúde primários e hospitais. Para tal, foram avaliadas as seguintes variáveis: frequência de contacto entre médicos de família e especialistas; percentagem de informação de retorno recebida pelos médicos de família; percentagem de recusas recebida pelos médicos de família; e tempo de espera entre o pedido das consultas hospitalares e a efetivação das mesmas para as especialidades mais referenciadas. As instituições escolhidas para o estudo foram a Unidade Local de Saúde de Castelo Branco e o ACeS Cova da Beira. Metodologia: O instrumento de medida utilizado para este estudo foi um questionário, com questões de resposta aberta e fechada, dirigido a médicos de família da Unidade Local de Saúde de Castelo Branco e do ACeS Cova da Beira, pretendendo assim averiguar a perceção que os mesmos têm em relação às variáveis descritas no tópico da Introdução. Resultados: Segundo dados estatísticos, meramente descritivos, os médicos de família da ULSCB apresentaram uma frequência de contacto inferior aos médicos de família do ACeS com os médicos hospitalares, e a percentagem de informação de retorno recebida pelos médicos de família da ULSCB revelou ser também inferior à recebida pelos médicos de família do ACeS. No entanto, as diferenças encontradas não puderam ser confirmadas para a amostra existente, uma vez que o teste Qui-quadrado foi inconclusivo. Quanto à percentagem de recusas recebida pelos médicos de família de ambas as instituições, e aos tempos de espera para a realização das consultas das especialidades mais referenciadas pelo ACeS Cova da Beira e pela ULSCB, a ULSCB não mostrou desvantagem significativa, mas também não revelou superioridade. Conclusão: As principais conclusões extraídas deste estudo vão no sentido de questionar a eficácia do modelo de organização institucional das ULS | Unidades Locais de Saúde no que diz respeito à articulação entre cuidados de saúde primários e cuidados de saúde hospitalares, em particular, no que se refere à partilha de informação clínica e à eficiência do processo de referenciação para consultas hospitalares.

The impact of changing the transportation cost structure of a food retail company

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Recognising, measuring and disclosing intangible assets under IAS 38 and IFRIC 12: Evidence from the Portuguese listed companies

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Efficiency optimization of the transportation supply chain activity: the maritime option for Volkswagen Autoeuropa

Field Lab of Entrepreneurial Innovative Ventures

Donations of non-financial resources: The motivation and consequences of measuring and accounting for it

This thesis focus on the measurement and accounting of contributions received by nonprofit organizations, as they are a significant component of revenues nowadays. A survey was developed and forward to 38 different NPOs, with the goal of understanding their motivations and what advantages and disadvantages they believe would result if they start to measure and account for all kinds of contributions. They presented many advantages from this practice; however, some are not doing it due to the difficulties in valuing contributions with no market value which would require a higher workload, waste of resources and time to be taken from other important activities.

Measuring the impact of short and lending practices using the DGTW benchmarks

Mutual fund managers increasingly lend their holdings and/or use short sales to generate higher returns for their funds. This project presents a first look into the impact these practices on performance using the performance measures: i) Characteristic Selectivity (CS), the ability of the fund's managers to choose stocks that outperform their benchmarks; ii) Characteristic Timing (CT), the ability of the manager to time the market; iii) and Average Style (AS), the returns from funds systematically holding stocks with certain characteristics. These returns are computed through the DGTW benchmarks. The effect of other variables that have also been shown to impact fund’s returns – total net assets under management, investment styles, turnover and expense ratios – will also be analyzed. I find that managers who use short-sales do not exhibit better stock picking abilities than those who do not, while mutual funds that lend do present higher CS returns. In addition, while lending is not significant for the total performance of a fund, the employment of short-sales and of both short-sales and lending has a negative impact on the fund’s performance.

Measuring social impact: A guideline to implement a tableau de bord

Many impact-seeking organisations cannot measure and demonstrate their social impact because they either lack technical expertise or requisite financial and human resources. This report clarifies the process of social impact measurement to help these organisations engage in social impact measurement practices. It presents a simple guideline to create a measurement approach based on the Tableau de Board. The guideline has been developed through a theoretical revision of best practices in social impact measurement, academic research and the author's individual thoughts and ideas. While a first testing of the approach revealed positive feedback, only future broad-scale testing will demonstrate the approach’s validity and feasibility.

Measuring poverty in Portugal: An absolute approach

The aim of this article is to measure poverty in Portugal from an absolute perspective. We estimated several absolute poverty lines and defined maximum and minimum thresholds. We applied aggregation measures to these thresholds and constructed probit models to assess the effect of some variables on poverty. The intervals obtained contain the poverty lines constructed by other approaches. We got evidence that poverty is positively correlated with the number of people in the household, with living alone; negatively correlated with the number of workers in the household, the share on non-food expenditure and the existence of a heating device at home.

Measuring impact with the social return on investment: the case of the social innovation hub

There is a growing interest in social impact assessment across the private, the public and the nonprofit sector. However, there is still limited academic research produced in this area, particularly in what concerns to the application of the Social Return of Investment (SROI) methodology. The goal of this Work Project is to give an overview of the social impact measurement literature and apply the Social Return on Investment, a flagship methodology to measure impact, to the specific case of the Social Innovation Hub (SIH). The findings suggest that each 1€ invested on the SIH generates 1,21€ in terms of social value. While this value seems very appealing to use, there are some risks in monetizing impact in such way, mainly due to the lack of reliable data available for benchmarking purposes.

Measuring the effects of price movements on private consumption

This paper studies how shocks in the prices of Food, Energy and Financial Assets affect private consumption using a VAR Model. Then, the total effects are broken into direct and indirect effects, using the coefficients taken from the previous model. We use quarterly data for the Portuguese economy from the last 20 years. We found that energy prices and financial assets have a strong connection with consumption, suggesting that the economy may be too exposed to shocks in these markets.

Measuring male infertility: epidemiological aspects

Evidence suggests that human semen quality may have been deteriorating in recent years. Most of the evidence is retrospective, based on analysis of data sets collected for other purposes. Measures of male infertility are needed if we want to monitor the biological capacity for males to reproduce over time or between different populations. We also need these measures in analytical epidemiology if we want to identify risk indicators, risk factors, or even causes of an impaired male fecundity-that is, the male component in the biological ability to reproduce. The most direct evaluation of fecundity is to measure the time it takes to conceive. Since the time of conception may be missed in the case of an early abortion, time to get pregnant is often measured as the time it takes to obtain a conception that survives until a clinically recognized pregnancy or even a pregnancy that ends with a live born child occurs. A prolonged time required to produce pregnancy may therefore be due to a failure to conceive or a failure to maintain a pregnancy until clinical recognition. Studies that focus on quantitative changes in fecundity (that does not cause sterility) should in principle be possible in a pregnancy sample. The most important limitation in fertility studies is that the design requires equal persistency in trying to become pregnant and rather similar fertility desires and family planning methods in the groups to be compared. This design is probably achievable in exposure studies that make comparisons with reasonable comparable groups concerning social conditions and use of contraceptive methods.