Fibre naturali nel settore dei compositi: confronto fibre di lino vs. fibre di carbonio

I materiali compositi possiedono proprietà funzionali e di resistenza sempre più performanti grazie alla natura dei rinforzanti in fibra di carbonio, i quali però sono caratterizzati da criticità relative al processo di trasformazione altamente energivoro e dispendioso, all’inquinamento collegato alla produzione delle fibre e al trattamento di sizing, nonché alla difficoltà nello stadio di separazione dei costituenti del manufatto composito e del conseguente riciclo. A causa di queste problematiche sono stati introdotti in produzione materiali a matrice epossidica rinforzata con fibre di lino. Lo studio è stato indirizzato verso la caratterizzazione delle materie prime che compongono i manufatti, quindi fibre e semilavorati, mediante analisi termiche dinamiche in DSC e TGA con il fine di determinare la composizione e resistenza dei singoli componenti e la misura della variazione nel comportamento quando sono uniti per comporre i prepreg. Sono state eseguite delle prove di igroscopicità, umidità e densità per ottenere una panoramica precisa sulle differenze nella struttura delle fibre in carbonio e lino che le differenzia in modo apprezzabile. Sono stati laminati compositi reticolati secondo tecnologia in autoclave, le cui proprietà sono state definite mediante prove termiche dinamiche in DSC, TGA, DMA, prove alla fiamma mediante conocalorimetro, prove fisiche di igroscopicità, umidità e densità, prove ottiche al SEM in seguito ad una rottura in trazione. Parte del progetto seguito è stato direzionato all’ottimizzazione del ciclo produttivo in autoclave. La simulazione del nuovo ciclo di cura industriale, RAPID, è stata eseguita per valutare la variazione della Tg finale e il grado di curing, nonché le proprietà termiche e meccaniche già valutate nel ciclo di cura, STANDARD.

Elettrofilatura di miscele di cheratina e PLA caricate con ossido di grafene per la produzione di materiali nanofibrosi

In questo elaborato di tesi sperimentale sono state preparate delle nanofibre elettrofilate di cheratina e PLA caricate con differenti percentuali in peso di grafene ossido. In questo particolare sistema, la dimensione del nano-rinforzo è paragonabile alla dimensione delle nanofibre (circa 150 nm), contrariamente alle convenzionali dimensioni dei rinforzi utilizzati per creare materiali compositi. La matrice polimerica utilizzata è una miscela costituita da cheratina e PLA che ha mostrato interazioni positive di interfase tra i due polimeri. Sono stati studiati gli effetti dei parametri di processo di elettrofilatura sulla morfologia delle nanofibre ottenute. Inoltre, è stata studiata l’influenza del grafene ossido sul processo di elettrofilatura, sulla morfologia delle nanofibrose, sulla viscosità delle miscele dei due polimeri e sulle proprietà termiche e meccaniche delle membrane nanofibrose elettrofilate. Tutte le miscele preparate sono state elettrofilate con successo ed i diametri delle nanofibre ottenute variano da 60-400 nm. I dati sperimentali hanno mostrato una diminuzione del diametro delle nanofibre all’aumentare della concentrazione di grafene ossido dovuta alla diminuzione di viscosità e probabile aumento della conducibilità delle soluzioni contenenti. Le analisi termiche hanno messo in evidenza che c’è un effetto nucleante del grafene ossido che induce, probabilmente, l’organizzazione delle catene proteiche. Le analisi meccaniche in trazione hanno mostrato un aumento del modulo di Young e del carico a rottura delle nanofibre elettrofilate caricate con grafene ossido.

Studio di compositi per stampa 3D a matrice termoplastica rinforzati con fibre di carbonio riciclate

In questo lavoro di tirocinio si sono caratterizzati compositi a matrice termoplastica rinforzati con fibre di carbonio. Le fibre di carbonio impiegate per le differenti formulazioni sono fibre vergini e fibre ottenute tramite un processo di piro-gassificazione di compositi di scarto, quindi riciclate. Questo progetto di ricerca ha come obiettivo quello di validare l’utilizzo delle fibre di carbonio riciclate, per l’ottenimento di compositi per stampa 3D, andando a confrontare le proprietà dei compositi con fibre vergini. Come matrici termoplastiche si è scelto di utilizzare l’acido polilattico (PLA) che è uno dei materiali più comunemente impiegati per la stampa 3D, e polipropilene (PP) che essendo facilmente riciclabile potrebbe portare alla formulazione di un materiale composito interamente da riciclo. Le proprietà termiche sono state determinate mediante analisi DSC e TGA ed è stato determinato il CTE dei materiali. Le proprietà meccaniche sono state analizzate attraverso DMA e prove di trazione.

Concretes and mortars recycled with water treatment sludge and construction and demolition rubble

There are about 7500 water treatment plants in Brazil. The wastes these plants generate in their decantation tanks and filters are discharged directly into the same brooks and rivers that supply water for treatment. Another serious environmental problem is the unregulated disposal of construction and demolition rubble, which increases the expenditure of public resources by degrading the urban environment and contributing to aggravate flooding and the proliferation of vectors harmful to public health. In this study, an evaluation was made of the possibility of recycling water treatment sludge in construction and demolition waste recycling plants. The axial compressive strength and water absorption of concretes and mortars produced with the exclusive and joint addition of these two types of waste was also determined. The ecoefficiency of this recycling was evaluated by determining the concentration of aluminum in the leached extract resulting from the solubilization of the recycled products. The production of concretes and mortars with the joint addition of water treatment sludge and recycled concrete rubble aggregates proved to be a viable recycling alternative from the standpoint of axial compression strength, modulus of elasticity, water absorption and tensile strength by the Brazilian test method. (C) 2008 Elsevier Ltd. All rights reserved.

DESIGN OF CONCRETE PLATFORMS OFFSHORE USING THE THREE-LAYER SHELL THEORY

The concrete offshore platforms, which are subjected a several loading combinations and, thus, requires an analysis more generic possible, can be designed using the concepts adopted to shell elements, but the resistance must be verify in particular cross-sections to shear forces. This work about design of shell elements will be make using the three-layer shell theory. The elements are subject to combined loading of membrane and plate, totalizing eight components of internal forces, which are three membrane forces, three moments (two out-of-plane bending moments and one in-plane, or torsion, moment) and two shear forces. The design method adopted, utilizing the iterative process proposed by Lourenco & Figueiras (1993) obtained from equations of equilibrium developed by Gupta (1896) , will be compared to results of experimentally tested shell elements found in the literature using the program DIANA.

Exergy-based method for analyzing the composition of the electricity cost generated in gas-fired combined cycle plants

The proposed method to analyze the composition of the cost of electricity is based on the energy conversion processes and the destruction of the exergy through the several thermodynamic processes that comprise a combined cycle power plant. The method uses thermoeconomics to evaluate and allocate the cost of exergy throughout the processes, considering costs related to inputs and investment in equipment. Although the concept may be applied to any combined cycle or cogeneration plant, this work develops only the mathematical modeling for three-pressure heat recovery steam generator (HRSG) configurations and total condensation of the produced steam. It is possible to study any n x 1 plant configuration (n sets of gas turbine and HRSGs associated to one steam turbine generator and condenser) with the developed model, assuming that every train operates identically and in steady state. The presented model was conceived from a complex configuration of a real power plant, over which variations may be applied in order to adapt it to a defined configuration under study [Borelli SJS. Method for the analysis of the composition of electricity costs in combined cycle thermoelectric power plants. Master in Energy Dissertation, Interdisciplinary Program of Energy, Institute of Eletro-technical and Energy, University of Sao Paulo, Sao Paulo, Brazil, 2005 (in Portuguese)]. The variations and adaptations include, for instance, use of reheat, supplementary firing and partial load operation. It is also possible to undertake sensitivity analysis on geometrical equipment parameters. (C) 2007 Elsevier Ltd. All rights reserved.

The-2518 bp promoter polymorphism at CCL2/MCP1 influences susceptibility to mucosal but not localized cutaneous leishmaniasis in Brazil

Mucosal leishmaniasis (ML) follows localized cutaneous leishmaniasis (CL) caused by Leishmania braziliensis. Proinflammatory responses mediate CL self-healing but are exaggerated in ML Proinflammatory monocyte chemoattractant protein 1 (MCP-1; encoded by CCL2) is associated with CL We explore its role in CL/ML through analysis of the regulatory CCL2 -2518 bp promoter polymorphism in CL/ML population samples and families from Brazil. Genotype frequencies were compared among ML/CL cases and control groups using logistic regression and the family-based association test (FBAT). MCP-1 was measured in plasma and macrophages. The GG recessive genotype at CCL2 -2518 bp was more common in patients with ML (N = 67) than in neighborhood control (NC; N = 60) subjects (OR 1.78; 95% Cl 1.01-3.14; P = 0.045), than in NC combined with leishmanin skin-test positive (N = 60) controls (OR 4.40; 95% CI 1.42-13.65; P = 0.010), and than in controls combined with CL (N = 60) patients (OR 2.78; 95% CI 1.13-6.85; P = 0.045). No associations were observed for CL compared to any groups. FBAT (91 ML and 223 CL cases in families) confirmed recessive association of ML with allele G (Z = 2.679; P = 0.007). Higher levels of MCP-1 occurred in plasma (P = 0.03) and macrophages (P < 0.0001) from GG compared to AA individuals. These results suggest that high MCP-1 increases risk of ML (C) 2010 Elsevier B.V. All rights reserved.

Endostatin gene therapy enhances the efficacy of IL-2 in suppressing metastatic renal cell carcinoma in mice

We investigated whether the administration of IL-2 combined with endostatin gene therapy was able to produce additive or even synergistic immunomodulatory activity in a mouse model of metastatic renal carcinoma. Renca cells were injected into the tail vein of BALB/c mice. After 24 h, the animals were randomly divided into four groups (5 mice/group). One group of mice was the control, the second group received treatment with 100,000 UI of Recombinant IL-2 (Proleukin, Chiron) twice a day, 1 day per week during 2 weeks (IL-2), the third group received treatment with a subcutaneous inoculation of 3.6 x 10(6) endostatin-producing cells, and the fourth group received both therapies (IL-2 + ES). Mice were treated for 2 weeks. In the survival studies, 10 mice/group daily, mice were monitored daily until they died. The presence of metastases led to a twofold increase in endostatin levels. Subcutaneous inoculation of NIH/3T3-LendSN cells resulted in a 2.75 and 2.78-fold increase in endostatin levels in the ES and IL-2 + ES group, respectively. At the end of the study, there was a significant decrease in lung wet weight, lung nodules area, and microvascular area (MVA) in all treated groups compared with the control group (P < 0.001). The significant difference in lung wet weight and lung nodules area between groups IL-2 and IL-2 + ES revealed a synergistic antitumor effect of the combined treatment (P < 0.05). The IL-2 + ES therapy Kaplan-Meier survival curves showed that the probability of survival was significantly higher for mice treated with the combined therapy (log-rank test, P = 0.0028). Conjugated therapy caused an increase in the infiltration of CD4, CD8 and CD49b lymphocytes. An increase in the amount of CD8 cells (P < 0.01) was observed when animals received both ES and IL-2, suggesting an additive effect of ES over IL-2 treatment. A synergistic effect of ES on the infiltration of CD4 (P < 0.001) and CD49b cells (P < 0.01) was also observed over the effect of IL-2. Here, we show that ES led to an increase in CD4 T helper cells as well as cytotoxic lymphocytes, such as NK cells and CD8 cells, within tumors of IL-2 treated mice. This means that ES plays a role in supporting the actions of T cells.

Monolithic CAD/CAM Lithium Disilicate Versus Veneered Y-TZP Crowns: Comparison of Failure Modes and Reliability After Fatigue

Purpose: The aim of this research was to evaluate the fatigue behavior and reliability of monolithic computer-aided design/computer-assisted manufacture (CAD/CAM) lithium disilicate and hand-layer-veneered zirconia all-ceramic crowns. Materials and Methods: A CAD-based mandibular molar crown preparation, fabricated using rapid prototyping, served as the master die. Fully anatomically shaped monolithic lithium disilicate crowns (IPS e.max CAD, n = 19) and hand-layer-veneered zirconia-based crowns (IPS e.max ZirCAD/Ceram, n = 21) were designed and milled using a CAD/CAM system. Crowns were cemented on aged dentinlike composite dies with resin cement. Crowns were exposed to mouth-motion fatigue by sliding a WC-indenter (r = 3.18 mm) 0.7 mm lingually down the distobuccal cusp using three different step-stress profiles until failure occurred. Failure was designated as a large chip or fracture through the crown. If no failures occurred at high loads (> 900 N), the test method was changed to staircase r ratio fatigue. Stress level probability curves and reliability were calculated. Results: Hand-layer-veneered zirconia crowns revealed veneer chipping and had a reliability of < 0.01 (0.03 to 0.00, two-sided 90% confidence bounds) for a mission of 100,000 cycles and a 200-N load. None of the fully anatomically shaped CAD/CAM-fabricated monolithic lithium disilicate crowns failed during step-stress mouth-motion fatigue (180,000 cycles, 900 N). CAD/CAM lithium disilicate crowns also survived r ratio fatigue (1,000,000 cycles, 100 to 1,000 N). There appears to be a threshold for damage/bulk fracture for the lithium disilicate ceramic in the range of 1,100 to 1,200 N. Conclusion: Based on present fatigue findings, the application of CAD/CAM lithium disilicate ceramic in a monolithic/fully anatomical configuration resulted in fatigue-resistant crowns, whereas hand-layer-veneered zirconia crowns revealed a high susceptibility to mouth-motion cyclic loading with early veneer failures. Int J Prosthodont 2010; 23: 434-442.

Shear modulus and strength of an acrylic adhesive by the notched plate shear method (Arcan) and the thick adherend shear test (TAST)

In this work, the shear modulus and strength of the acrylic adhesive 3M® DP 8005 was evaluated by two different methods: the Thick Adherend Shear Test (TAST) and the Notched Plate Shear Method (Arcan). However, TAST standards advise the use of a special extensometer attached to the specimen, which requires a very experienced technician. In the present study, the adhesive shear displacement for the TAST was measured using an optical technique, and also with a conventional inductive extensometer of 25 mm used for tensile tests. This allowed for an assessment of suitability of using a conventional extensometer to measure this parameter. Since the results obtained by the two techniques are identical, it can be concluded that using a conventional extensometer is a valid option to obtain the shear modulus for the particular adhesive used. In the Arcan tests, the adhesive shear displacement was only measured using the optical technique. This work also aimed the comparison of shear modulus and strength obtained by the TAST and Arcan test methods.

Comparison between E-test and CLSI broth microdilution method for antifungal susceptibility testing of Candida albicans oral isolates

Thirty Candida albicans isolated from oral candidosis patients and 30 C. albicans isolated from control individuals were studied. In vitro susceptibility tests were performed for amphotericin B, fluconazole, 5-flucytosine and itraconazole through the Clinical and Laboratorial Standards Institute (CLSI) reference method and E test system. The results obtained were analyzed and compared. MIC values were similar for the strains isolated from oral candidosis patients and control individuals. The agreement rate for the two methods was 66.67% for amphotericin B, 53.33% for fluconazole, 65% for flucytosine and 45% for itraconazole. According to our data, E test method could be an alternative to trial routine susceptibility testing due to its simplicity. However, it can not be considered a substitute for the CLSI reference method.

Amniocentesis in HIV Pregnant Women: 16 Years of Experience

The iatrogenic risk of HIV vertical transmission, calculated in initial epidemiologic studies, seemed to counterindicate invasive prenatal diagnosis (PND) procedures. The implementation of highly active antiretroviral therapy (HAART) represented a turning point in PND management, owing to a rapid and effective reduction of maternal viral load (VL). In the present study, we identified cases of vertical transmission in HIV-infected pregnant women who did amniocentesis in the second trimester of pregnancy (n = 27), from 1996 to 2011. We divided our sample into Group A--women under HAART when submitted to amniocentesis (n = 20) and Group B--women without antiretroviral therapy before amniocentesis (n = 7). We had 1 case of vertical transmission in Group B. Preconceptional or early first trimester HIV serology is essential to avoid performing an amniocentesis without antiretroviral therapy or viral suppression. When there is an indication for amniocentesis in an HIV-infected pregnant woman, it should be done if the patient is on HAART and, if possible, when VL is undetectable. Nowadays, with combined first trimester screening test to select pregnancies with high risk of aneuploidies, advanced maternal age is a less frequent indication to perform PND invasive procedures, representing an outstanding gain in prenatal diagnosis of this population.

Bond of NSM FRP strengthened concrete: round robin test initiative

Despite the extensive research that has been conducted on the debonding behaviour of FRP strengthening systems, no standard methodology has been yet established on its experimental characterization. In this context, to assess the performance and reliability of small scale testing on NSM (near surface mounted) FRP strengthening systems, an experimental program was carried out on a series of nine NSM FRP strengthening systems, in the framework of an international Round Robin Testing (RRT). Eleven laboratories and seven manufacturers and suppliers participated in this extensive international exercise, which regarded both NSM and EBR FRP strengthening systems. Test results obtained for the NSM systems by the participating laboratories are discussed and compared in this paper to investigate the feasibility of the adopted single/double pulling shear test method, to investigate the mechanism of bond between NSM FRP reinforcement and concrete, and to investigate the level of variability obtained between the participating laboratories testing the same material batches. It is concluded that the tested variants in the adopted single/double shear pulling test have a significant influence, stressing the importance of the level of detail of standardized test protocols for bond verification. On overall, given the variants included in this study, the obtained variation in bond stress-slip behaviour between the laboratories remained fairly limited.

Fluência no betão desde as primeiras idades: um estudo experimental

Dissertação de mestrado integrado em Engenharia Civil

Laboratory Study of Structural Behavior of Alternative Dowel Bars, April 2006

Load transfer across transverse joints has always been a factor contributing to the useful life of concrete pavements. For many years, round steel dowels have been the conventional load transfer mechanism. Many problems have been associated with the round steel dowels. The most detrimental effect of the steel dowel is corrosion. Repeated loading over time also damages joints. When a dowel is repeatedly loaded over a long period of time, the high bearing stresses found at the top and bottom edge of a bar erode the surrounding concrete. This oblonging creates multiple problems in the joint. Over the past decade, Iowa State University has performed extensive research on new dowel shapes and materials to mitigate the effects of oblonging and corrosion. This report evaluates the bearing stress performance of six different dowel bar types subjected to two different shear load laboratory test methods. The first load test is the AASHTO T253 method. The second procedure is an experimental cantilevered dowel test. The major objective was to investigate and improve the current AASHTO T253 test method for determining the modulus of dowel support, k0. The modified AASHTO test procedure was examined alongside an experimental cantilever dowel test. The modified AASHTO specimens were also subjected to a small-scale fatigue test in order to simulate long-term dowel behavior with respect to concrete joint damage. Loss on ignition tests were also performed on the GFRP dowel specimens to determine the resin content percentage. The study concluded that all of the tested dowel bar shapes and materials were adequate with respect to performance under shear loading. The modified AASHTO method yielded more desirable results than the ones obtained from the cantilever test. The investigators determined that the experimental cantilever test was not a satisfactory test method to replace or verify the AASHTO T253 method.