979 resultados para Market Potential
Resumo:
In the last few decades, the world has witnessed an enormous growth in the volume of foreign direct investment (FDI). The global stock of FDI reached US$ 7.5 trillion in 2003 and accounted for 11% of world Gross Domestic Product, up from 7% in 1990. The sales of multinational enterprises at around US$ 19 trillion were more than double the level of world exports. Substantial FDI inflows went into transition countries. Inflows into one of the region's largest recipient, the Russian Federation, almost doubled, enabling Russia to become one of the five top FDI destinations in 2005-2006. FDI inflows in Russia have increased almost threefold from 13.6% in 2003 to 35% in 2007. In 2003, these flows were twice greater than those into China; whilst in 2007 they were six times larger. Russia's FDI inflows were also about 2.5 times greater than those of Brazil. Efficient government institutions are argued by many economists to foster FDI and growth as a result. However, the magnitude of this effect has yet to be measured. This thesis takes a Political Economy approach to explore, empirically, the potential impact of malfunctioning governmental institutions, proxied by three indices of perceived corruption, on FDI stocks accumulation/distribution within Russia over the period of 2002-2004. Using a regional data-set it concentrates on three areas relating to FDI. Firstly, it considers the significance, the size and the sign of the impact of perceived corruption on accumulation of FDI stocks within Russia. Secondly, it quantifies the impact of perceived corruption on the volume of FDI stocks simultaneously estimating the impact of the investment in public capital such as telecommunications and transportation networks on FDI in the presence of corruption. In particular, it addresses the question whether more corrupt regions in Russia are also those that could have accumulated more of FDI stocks, and investigates whether those 'more corrupt' regions would have had lower level of public capital investment. Finally, it examines whether decentralisation increases or decreases corruption and whether a larger extent of decentralisation has a positive or negative impact on FDI (stocks). The results of three studies are as follows. Firstly, along with market potential, corruption is found to be one of the key factors in explaining FDI distribution within Russia between 2002 and 2004. Secondly, corruption on average is found to be related to FDI positively suggesting that it may act as speed money: to save their time foreign direct investors might be willing to bribe the regional authorities so to move in front of the bureaucratic lines. Thirdly, although when corruption is controlled for, the impact of the latter on unobservable FDI is found to be on average positive, no association between FDI and public investment is observed with the only exception of transportation infrastructure (i.e., railway). The results might suggest therefore that it is possible that not only regions with high levels of perceived corruption attract more FDI but also that expansions in public capital investments are not accompanied by an increase of the volume of FDI (stocks) in regions with high levels of corruption. This casts some doubt on the productivity of the investment in public capital in these regions as it might be that bureaucrats may prefer to use these infrastructural projects for rent extraction. Finally, we find decentralisation to have a significant and positive impact on both FDI stock accumulation and corruption, suggesting that local governments may spend more on public goods to make the area more attractive to foreign investors but at the same time they may be interested into extracting rents from foreign investors. These results support the idea that the regulation of FDI is associated with and facilitated by a larger public sector, which distorts competition and introduces opportunities for rent-seeking by particular economic and political factors.
Resumo:
With the proliferation of Internet, online shopping has become an increasingly essential part of global economy and thus, increasingly important field of research. While the internationalization process of a company has for long been in the focus of academic research, internationalization of e-commerce is a much newer field of study. The earlier empirical research has amply pointed out the difficulties of traditional internationalization models to explain the internationalization process of e-commerce companies. Conversely, business networks have been argued to play a major role in the e-commerce internationalization. The purpose of this study is to study how business networks influence the internationalization process of e-commerce companies. Conducted as a case study, this research studies the internationalization process of two Finnish e-commerce companies, Hong Kong and Hifi Studio, into possibly one of the most booming online markets - Russia. The empirical findings of the study concur with the earlier literature. The observed internationalization process differs from the assumptions of traditional international business models, and business networks are found influential for the process. However, the behavior of the two studied organizations is observed more independent than the network view to internationalization presumes. The trigger to internationalize rises from within the organizations and market potential is the primary explanation for selection of target markets. No network relationships were found to have an effect on foreign market selection, nor selection of mode of operations. This study indicates that exploring foreign markets is actually about investing in specific relationships within a business network, rather than overcoming economic, institutional, and cultural barriers. Companies utilize a wide array of relationships in their internationalization process and may effectively overcome disadvantages of operating in a foreign market by adopting partnerships with correct partners. However, building and maintaining operational business relationships is a demanding process, and organizations should prefer quality over quantity in their partner selection. Moreover, relationships where the focal party possess significant influence and leverage over other actor should be favored. Lastly, relationships need to be continuously evaluated and assessed in comparison with strategic business goals. Ultimately, e-commerce can be considered a new, low-risk, cost-effective, and relationship-oriented internationalization method, suitable especially in volatile market conditions as Russia today. This revolutionary new mode of international business activity calls for more profound focus of business managers and academia alike, as its weight on global trade continues to grow.
Resumo:
Valmistettaessa kiteisiä tuotteita kemianteollisuudessa jatkuvatoimisuudella voidaan saavuttaa merkittäviä etuja panosprosesseihin verrattuna. Toistettavuus ja tuotekiteiden ominaisuudet paranevat ja kustannussäästöjä saadaan sekä kiteytyksestä että mahdollisesta jatkokäsittelyn yksinkertaistumisesta. Hienokemianteollisuudessa panoskiteytys on kuitenkin edelleen vallitseva kiteytysmenetelmä pienten tuotantovolyymien, tuotteiden vaihtelevuuden ja panoskiteyttimien puhdistamisen helppouden vuoksi. Ultraäänen vaikutusta kiteytykseen on tutkittu kattavasti viimevuosina. Tehoultraäänen aiheuttamalla kavitaatiolla on havaittu olevan merkittäviä kiteytystä edistäviä vaikutuksia. Yhdistämällä jatkuvatoimiseen putkivirtauskiteyttimeen tehoultraäänen tukkeutumista estävä ja kiteytystä edistävä vaikutus saadaan systeemi, jota voidaan pitää varteenotettavana vaihtoehtona panoskiteyttimille hienokemianteollisuudessa. Tässä työssä määritettiin markkinapotentiaali jatkuvatoimiselle ultraääniprosessointijärjestelmälle eurooppalaisten hienokemianteollisuuden yritysten parissa. Markkinapotentiaalin määritys tehtiin makrotasolla nojautumalla toimialatilastoihin, jotka poimittiin Amadeus-tietokannasta. Jatkuvatoimista ultraääniprosessointijärjestelmää myös kehitettiin edelleen lisäämällä moduulien määrää kolmesta viiteen, testaamalla eri putkivaihtoehtoja ja määrittämällä korkeimmat käyttökonsentraatiot putkivirtauskiteyttimelle kolmella eri malliaineella. Ultraäänen vaikutusta viipymäaikajakaumaan tarkasteltiin pulssikokeiden avulla kolmen eri putkivaihtoehdon tapauksessa. Ultaääniprosessointijärjestelmän putkivaihtoehdoista 6 mm sisähalkaisijaisessa teräsputkessa saavutettiin korkeammat saannot ja pienemmät tuotekiteet kuin 4 mm sisähalkaisijaisessa teräsputkessa. Ultraääni ei läpäissyt 4 mm sisähalkaisijaista polyamidiputkea riittävän tehokkaasti ehkäistäkseen systeemin tukkeutumista.
Resumo:
A really particular and innovative metal-polymer sandwich material is Hybrix. Hybrix is a product developed and manufactured by Lamera AB, Gothenburg, Sweden. This innovative hybrid material is composed by two relatively thin metal layers if compared to the core thickness. The most used metals are aluminum and stainless steel and are separated by a core of nylon fibres oriented perpendicularly to the metal plates. The core is then completed by adhesive layers applied at the PA66-metal interface that once cured maintain the nylon fibres in position. This special material is very light and formable. Moreover Hybrix, depending on the specific metal which is used, can achieve a good corrosion resistance and it can be cut and punched easily. Hybrix architecture itself provides extremely good bending stiffness, damping properties, insulation capability, etc., which again, of course, change in magnitude depending in the metal alloy which is used, its thickness and core thickness. For these reasons nowadays it shows potential for all the applications which have the above mentioned characteristic as a requirement. Finally Hybrix can be processed with tools used in regular metal sheet industry and can be handled as solid metal sheets. In this master thesis project, pre-formed parts of Hybrix were studied and characterized. Previous work on Hybrix was focused on analyze its market potential and different adhesive to be used in the core. All the tests were carried out on flat unformed specimens. However, in order to have a complete description of this material also the effect of the forming process must be taken into account. Thus the main activities of the present master thesis are the following: Dynamic Mechanical-Thermal Analysis (DMTA) on unformed Hybrix samples of different thickness and on pre-strained Hybrix samples, pure epoxy adhesive samples analysis and finally moisture effects evaluation on Hybrix composite structure.
Resumo:
La tuberculosis TB es una de las principales causas de muerte en el mundo en individuos con infección por VIH. En Colombia esta coinfección soporta una carga importante en la población general convirtiéndose en un problema de salud pública. En estos pacientes las pruebas diagnósticas tienen sensibilidad inferior y la enfermedad evoluciona con mayor frecuencia hacia formas diseminadas y rápidamente progresivas y su diagnóstico oportuno representa un reto en Salud. El objetivo de este proyecto es evaluar el desempeño de las pruebas diagnósticas convencionales y moleculares, para la detección de TB latente y activa pacientes con VIH, en dos hospitales públicos de Bogotá. Para TB latente se evaluó la concordancia entre las pruebas QuantiFERON-TB (QTF) y Tuberculina (PPD), sugiriendo superioridad del QTF sobre la PPD. Se evaluaron tres pruebas diagnósticas por su sensibilidad y especificidad, baciloscopia (BK), GenoType®MTBDR plus (Genotype) y PCR IS6110 teniendo como estándar de oro el cultivo. Los resultados de sensibilidad (S) y especificidad (E) de cada prueba con una prevalencia del 19,4 % de TB pulmonar y extrapulmonar en los pacientes que participaron del estudio fue: BK S: 64% E: 99,1%; Genotype S: 77,8% E: 94,5%; PCRIS6110 S: 73% E: 95,5%, de la misma forma se determinaron los valores predictivos positivos y negativos (VPP y VPN) BK: 88,9% y 94,8%, Genotype S: 77,8% E: 94,5%; PCRIS6110 S: 90% y 95,7%. Se concluyó bajo análisis de curva ROC que las pruebas muestran un rendimiento diagnóstico similar por separado en el diagnóstico de TB en pacientes con VIH, aumentando su rendimiento diagnostico cuando se combinan
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente, perfil Gestão de Sistemas Ambientais
Resumo:
A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics
Resumo:
A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics
Resumo:
NSBE-UNL
Resumo:
There is a rising demand for local food which traveled only short distances and is marketed directly by the producer. With growing importance of local food also the amount of literature in this field increased. Yet, literature is lacking to examine the challenges and burdens consumers face while trying to purchase local food. Evidence is shown that a gap exists between the intention of consumers who would like to purchase local food and their actual behavior. However, reasons for this gap are only discovered as byproducts of other research objectives. Consequently, this study investigates the specific reasons for the intention-behavior gap of consumers in the local food market. The study makes use of semi-structured face-to-face interviews with rural and urban respondents. The interviews are analyzed by qualitative content analysis based on Elo and Kyngäs (2008). Revealed key drivers for the intention-behavior gap are (1) the lack of awareness where to purchase local food products, (2) the limited reachability of local food producers, (3) the assortment of the local producer in regard to size and composition and (4) the lack in transparency of the prices of local food. Consequently, it is the producers turn to eliminate the revealed barriers by proactively bringing their products closer to the consumer.
Resumo:
In this article we examine the potential effect of market structureon hospital technical efficiency as a measure of performance controlled byownership and regulation. This study is relevant to provide an evaluationof the potential effects of recommended and initiated deregulation policiesin order to promote market reforms in the context of a European NationalHealth Service. Our goal was reached through three main empirical stages.Firstly, using patient origin data from hospitals in the region of Cataloniain 1990, we estimated geographic hospital markets through the Elzinga--Hogartyapproach, based on patient flows. Then we measured the market level ofconcentration using the Herfindahl--Hirschman index. Secondly, technicaland scale efficiency scores for each hospital was obtained specifying aData Envelopment Analysis. According to the data nearly two--thirds of thehospitals operate under the production frontier with an average efficiencyscore of 0.841. Finally, the determinants of the efficiency scores wereinvestigated using a censored regression model. Special attention waspaid to test the hypothesis that there is an efficiency improvement in morecompetitive markets. The results suggest that the number of competitors inthe market contributes positively to technical efficiency and there is someevidence that the differences in efficiency scores are attributed toseveral environmental factors such as ownership, market structure andregulation effects.
Resumo:
Reformation of electricity markets has initiated creation of ancillary services markets all over the world. The Russian electricity market reform is in transition period, that is why the problem of ancillary services market has just arisen. Since the model of market rules was created, ancillary services market became a topical question for generating companies. This master’s thesis is focused on the describing the possible ancillary services around the world and in Russia specifically. Moreover, the physical interpretation of ancillary services is defined. In addition, possibility of generation company to participate in the ancillary services market was considered. Calculations were made for primary frequency regulation service, where necessary level of price bids and payback period were evaluated.
Resumo:
Three groups of steers--one theoretical group and two experimental groups—were evaluated for marketing cattle live, as boxed beef, and grade and yield when the live price was $71 to $73/cwt, grade and yield price $125/cwt for Choice yield grade 3 carcasses with $20/cwt discount for Select carcasses, and in a commodity-trim or close-trim boxed beef market. The results show that the value of highyielding steers can be significantly increased if sold in a close-trim boxed beef market. The close-trim premiums ranged from $5.06 per head for Select close-trim yield grade 4 carcasses to $87.18 per head for close-trim Choice yield grade 1 carcasses. A group of experimental steers averaging 82% Choice and 60% yield grades 1 and 2 returned an additional $104 in the close-trim boxed market compared with selling live for $73/cwt. Another group of experimental steers averaging 21% Choice, 18% Standard, and 93% yield grades 1 and 2 had $29 per head greater return than if the steers had been sold live for $71/cwt. These comparisons emphasize the importance of knowing how cattle will potentially grade before selecting an alternative marketing strategy. This prior knowledge is most important when the spread in price between Choice and Select is high. Producers need to learn more about their cattle to predict how the cattle may grade for a specified value-based market.