Ocio, inclusión social y participación en la población adulta con discapacidad

En este artículo presentamos algunos de los resultados encontrados en el proyecto de investigación “ Ocio e inclusión social. Una mirada desde la población adulta en situación de discapacidad" , que buscó, en un primer momento, analizar las causas del bajo impacto de los espacios de ocio y tiempo libre ofrecidos para personas con discapacidad adultas en el municipio de Rionegro (Antioquia-Colombia), para luego conformar un grupo de trabajo, con el objetivo de que se convirtieran en líderes y gestores de procesos, no sólo recreativos, sino también sociales, políticos, entre otros, y además, que se proyectaran como formadores de otras personas. Este propósito requirió abordar paradigmas y enfoques metodológicos que permitieron, no sólo identificar necesidades, sino la generación de procesos de transformación y empoderamiento de las comunidades. Con el proyecto, se logró conformar este colectivo de personas, quien está actualmente coordinado por una persona con discapacidad, logrando su visibilización e inicio de gestiones que les permitirá mejorar su calidad de vida y la de sus familias y empoderarse de procesos que les permita un rol más activo en la demanda de bienes y servicios.

Caracterización y aprovechamiento de los varillales amazónicos : contribución a la economía de las comunidades locales

La Gestión Forestal Sustentable es la principal herramienta para garantizar la compatibilidad entre producción y conservación en todos los bosques, y mas especialmente en los que exhiben niveles máximos de diversidad, como los tropicales humedos. En ellos existe un gran desconocimiento sobre la gestión de los recursos maderables de pequeña dimensión y los no maderables (PFNM) con mercado local. La madera redonda de pequeño diámetro es un recurso forestal de bajo valor económico extraído tradicionalmente por los pobladores locales de las zonas tropicales húmedas para construir sus viviendas. Los fustes de mejor calidad se obtienen del bosque de varillal, o bosques sobre arena blanca, altamente oligotroficos, sin potencial agrícola, escasos, dispersos, de pequeña superficie, gran fragilidad y alto porcentaje de endemismos. En el entorno de los centros urbanos de la Amazonia peruana, esta madera supone uno de los principales ingresos económicos para la población local, al ser extraida para su comercialización en dichos centros urbanos. Esto supone un riesgo de sobre-explotacion cuyos efectos se desconocen hasta el momento. Para acercarnos la situacion ambiental, social y económica asociada al varillal, se han realizado inventarios botanicos y de estructura forestal, se ha descrito el sistema de aprovechamiento tradicional y cuantificado sus efectos y, finalmente, se han realizado encuestas orientadas a analizar la situación social y economica de las comunidades locales que extraen y comercializan sus productos. El aprovechamiento tradicional del varillal es una actividad de bajo impacto que no emplea maquinaria y se centra en la extracción de fustes con diámetro normal entre 5 y 15 cm y características especificas de longitud, forma de fuste y calidad de la especie. Los resultados ponen de manifiesto la relevancia de la distancia existente entre el punto de extracción y el punto de venta, asi como la gran influencia que tiene la situación social y económica en la gestión sustentable del varillal. Todo ello pone en evidencia que si existe un cierto efecto negativo de la extracción intensa y continuada que han sufrido los varíllales mas próximos al centro urbano. Para favorecer una Gestión Forestal Sustentable que reduzca este efecto negativo es esencial llevar a cabo una adecuada planificación comunal que permita establecer una secuencia ordenada de zonas de corta y un cronograma para su gestión y aprovechamiento que evite la extracción repetida en un mismo varillal. ABSTRACT Sustainable forest management is the main tool to ensure compatibility between production and conservation in all forests, and especially in those exhibiting the maximum levels of diversity, such as tropical rain. Within them there is a great ignorance about the management of small sized timber and non-timber resources (PFMN) in the local market. The small-diameter round timber is a forest resource of low economic value extracted traditionally by local people of the humid tropics to build their homes. The better quality shafts are obtained from varillal forest or forests on white sand, highly oligotrophic, no agricultural potential, few, scattered, small size, fragility and high percentage of endemic species. In the environment of the urban centres of the Peruvian Amazon, this wood is one of the main incomes for the local population, since it is extracted for marketing in these urban centres. This poses a risk of overexploitation whose effects are unknown so far. To approach the environmental, social and economic situation associated to the varillal, botanical and forest structure inventories have been conducted, traditional harvesting systems described and their effects quantified and targeted surveys have eventually been conducted to analyse the social and local economic situation of the communities that extract and sell the products. The traditional use of varillal is a low-impact activity that does not use machinery and focuses on the extraction of shafts with a normal diameter of between 5 and 15 cm and specific characteristics in length, stem form and quality of the species. The results highlight the importance of the distance from the extraction point and the sale point, and the great influence of the social and economic situation in the sustainable management of varillal. This demonstrates that there is indeed a negative effect caused by the intense and continuous extraction that varillales closest to the city centre have suffered. To encourage a Sustainable Forest Management to reduce this negative effect is essential to conduct proper community planning in order to establish an ordered sequence of areas and a chronogram for their management and use, to avoid a repeat extraction in the same varillal.

Coleópteros Saproxílicos de los Bosques de Montaña en el Norte de la Comunidad de Madrid

La fauna saproxílica ha cobrado mucha relevancia en los últimos años. Por una parte, debido a los múltiples papeles que juega en la ecología de los bosques y por otra, por encontrarse muchas especies de ese grupo amenazadas como consecuencia de la intensificación de las actividades forestales. Se supone que los bosques de Europa meridional albergan una fauna saproxílica rica y variada. Sin embargo apenas se han realizado estudios que permitan conocer la composición de las biocenosis saproxílicas, así como el estatus y grado de amenaza a que está sometida cada especie. En esta tesis se han muestreado de forma sistemática las comunidades de coleópteros saproxílicos de cuatro montes del norte de la Comunidad de Madrid, muy diferentes a pesar de su cercanía: Dehesa Bonita de Somosierra, Hayedo de Montejo, Dehesa de Madarcos y Pinar de La Maleza. Para llevar a cabo la recogida de muestras se definió una estación de muestreo tipo, compuesta por cuatro trampas aéreas con cebo oloroso, dos trampas de ventana y una trampa de embudos. En los dos primeros montes mencionados se desplegaron seis estaciones de muestreo, por sólo tres en los otros dos. El primer objetivo de esta tesis fue conocer las especies de coleópteros que constituyen la fauna de los cuatro montes estudiados. Los muestreos sistemáticos reportaron la presencia de un total de 357 especies de coleópteros saproxílicos, siendo el Hayedo de Montejo el bosque con la diversidad más alta, 220 especies; le siguen la Dehesa de Madarcos con 116; el pinar de La Maleza con 115; y la Dehesa de Somosierra con 109, si bien la fauna de este ultimo bosque podría ser mucho más variada dado que la interferencia del ganado con algunos dispositivos de captura hizo que se perdiera parte del material allí recolectado. Se han encontrado nueve especies nuevas para la fauna de la Península Ibérica, y otras muchas desconocidas previamente en el centro peninsular. Un total de 50 especies se encuentran incluidas en la Lista Roja Europea de coleópteros saproxílicos. El segundo objetivo fue estimar la riqueza de fauna de coleópteros saproxílicos en cada bosque. Partiendo de los datos de los respectivo muestreos se calcularon diferentes estimadores, paramétricos y no paramétricos, y se elaboraron las curvas de rarefacción para cada bosque y para el conjunto. El bosque con más biodiversidad ha resultado ser el Hayedo de Montejo, que albergaría entre 254 y 332 especies. En el Pinar de la Maleza se encontrarían de 132 a 223; de 128 a 205 en la Dehesa de Somosierra; y entre 134 y 188 en la Dehesa de Madarcos. Para el conjunto del área se estimó la presencia de entre 411 y 512 especies. El tercer objetivo fue evaluar la influencia de algunos factores como la especie arbórea dominante y la cantidad de madera muerta en la riqueza y diversidad de coleópteros saproxílicos. El estudio se realizó en el Hayedo de Montejo, encontrando una alta correlación positiva entre cantidad y calidad de madera muerta, y diversidad y riqueza de especies de coleópteros saproxílicos. El cuarto objetivo fue evaluar la eficacia y complementariedad de los diferentes tipos de dispositivos de captura empleados en los muestreos. El más eficaz resultó ser la trampa de ventana, seguido por la trampa aérea con cebo oloroso, y finalmente la trampa de embudos. La mayor complementariedad se encontró entre trampas de ventana y aéreas con cebo oloroso. No obstante, si se quiere optimizar la exhaustividad del inventario no se debe prescindir de ninguno de los sistemas. En cualquier caso, puede afirmarse que la efectividad de los tres tipos de dispositivos de captura utilizados en los muestreos fue baja, pues para la gran mayoría de especies presentes se capturó un número de ejemplares realmente bajo. El bajo rendimiento de captura implica un bajo impacto sobre las poblaciones de las especies muestreadas, y esto supone una importante ventaja desde el punto de vista de la conservación. Finalmente, se dejan algunas recomendaciones de manejo a aplicar en cada uno de los montes con el fin de preservar o mejorar los hábitats utilizables por la fauna saproxílica que garanticen el mantenimiento y mejora de dichas comunidades. ABSTRACT The saproxylic fauna has become increasingly important in recent years. It has been due, on the one hand, to the multiple roles they play in the forest ecosystems and, on the other, because of the large proportion of endangered saproxylic species as a result of the intensification of forestry. It is generally assumed that southern Europe forests are home to a rich and diverse saproxylic fauna. However, there are hardly any studies leading to reveal the composition of saproxylic biocenosis, or the stage and extent of the threat each species is suffering. For the purpose of this thesis the communities of saproxylic beetles of four mountain forests in northern Comunidad de Madrid have been systematically sampled: Dehesa Bonita de Somosierra, Hayedo de Montejo, Dehesa de Madarcos and Pinar de La Maleza. They are very different from each other in spite of not being too far apart. In order to carry out sample collection, a standard sampling station was defined as follows: four smelly bait aerial traps, two window traps and one funnel trap. Six sampling stations were deployed in each of the first two forests mentioned above; put only three in each of the other two. The first aim of this thesis was to determine the composition of saproxylic beetles fauna inhabiting each of the four forests studied. Systematic sampling reported the presence of a total of 357 species of saproxylic beetles. Hayedo de Montejo, with 220 species, is the forest with the highest diversity, followed by Dehesa de Madarcos, 116; Pinar de La Maleza, 115, and Dehesa de Somosierra, 109. The fauna of the latter forest, however, could be much more varied, since cattle interference with some capture devices caused the loss of part of the material collected there. Nine new species in the fauna of the Iberian Peninsula were found, and many others previously unknown in the center of the Peninsula. A total of 41 of those species are included in the European Red List of saproxylic beetles. The second aim was to estimate the richness of saproxylic (beetle) fauna in each forest. From the data of the respective sampling, different parametric and nonparametric estimators were calculated, and rarefaction curves for each forest, as well as for the four of them together, were drawn. The most biodiverse forest turned out to be Hayedo de Montejo, which houses between 254 and 332 species. In Pinar de La Maleza, between 132 and 223 species were found; between 128 and 205 in Dehesa de Somosierra, and between 134 and 188 in Dehesa de Madarcos. The estimated diversity of species for the whole area ranges from 411 to 512. The third aim was to evaluate the influence of such factors as the dominant tree species and the amount of dead wood in the richness and diversity of saproxylic beetles. The study was conducted at Hayedo de Montejo, finding a high positive correlation between quantity and quality of coarse woody debris and diversity and richness of saproxylic beetle species. The fourth aim was to evaluate the effectiveness and complementarity of the different sampling methods used in this research work. The most effective proved to be the window trap, followed by the smelly bait aerial trap and the funnel trap, in that order. The greater complementarity was found between window and aerial traps. However, in order to optimize the completeness of the inventory, neither of the systems should be discarded. Nevertheless, the effectiveness of the three types of capture devices used in this piece of research was on the whole rather low, since for the vast majority of species, a significant low number of specimens were captured. Poor trapping performance implies a low impact on the populations of the sampled species, and this is an important advantage in terms of conservation. Finally, this thesis gives some recommendations with regard to the management of each of those four forests, leading to preserve and improve the habitats of the saproxylic wildlife and so ensure the maintenance and growth of their communities.

Three distinct structural environments of a transmembrane domain in the inwardly rectifying potassium channel ROMK1 defined by perturbation.

To probe the protein environment of an ion channel, we have perturbed the structure of a transmembrane domain by substituting side chains with those of two different sizes by using site-specific mutagenesis. We have used Trp and Ala as a high- and a low-impact perturbation probe, respectively, to replace each of 18 consecutive residues within the putative second transmembrane segment, M2, of an inwardly rectifying potassium channel, ROMK1. Our rationale is that a change in the channel function as a consequence of these mutations at a particular position will reflect the structural environment of the altered side chain. Each position can then be assigned to one of three classes of environments, as grated by different levels of perturbation: very tolerant (channel functions with both Trp and Ala substitutions), tolerant (function preserved with Ala but not with Trp substitution), and intolerant (either Ala or Trp substitution destroys function). We identify the very tolerant environment as being lipid-facing, tolerant as protein-interior-facing, and intolerant as pore-facing. We observe a strikingly ordered pattern of perturbation of all three environmental classes. This result indicates that M2 is a straight alpha-helix.

Reconciliação de dados de uma malha de gasodutos.

O trabalho aborda a aplicação da técnica de reconciliação de dados para o balanço da movimentação de gás natural em uma malha de escoamento de gás não processado, elaborando também um método de cálculo rápido de inventário de um duto. Foram aplicadas, separadamente, a reconciliação volumétrica à condição padrão de medição e a reconciliação mássica, bem como realizadas comparações dos resultados em relação ao balanço original e verificação do balanço resultante de energia em termos de poder calorífico superior. Dois conjuntos de pesos foram aplicados, um arbitrado de acordo com o conhecimento prévio da qualidade do sistema de medição de cada um dos pontos, outro baseado no inverso da variância dos volumes diários apurados no período. Ambos apresentaram bons resultados e o segundo foi considerado o mais apropriado. Por meio de uma abordagem termodinâmica, foi avaliado o potencial impacto, ao balanço, da condensação de parte da fase gás ao longo do escoamento e a injeção de um condensado de gás natural não estabilizado por uma das fontes. Ambos tendem a impactar o balanço, sendo o resultado esperado um menor volume, massa e energia de fase gás na saída. Outros fatores de considerável impacto na qualidade dos dados e no resultado final da reconciliação são a qualidade da medição de saída do sistema e a representatividade da composição do gás neste ponto. O inventário é calculado a partir de uma regressão que se baseia em um regime permanente de escoamento, o que pode apresentar maior desvio quando fortes transientes estão ocorrendo no último dia do mês, porém a variação de inventário ao longo do mês possui baixo impacto no balanço. Concluiu-se que a reconciliação volumétrica é a mais apropriada para este sistema, pois os dados reconciliados levam os balanços mássicos e de energia em termos de poder calorífico, ambos na fase gás, para dentro do perfil esperado de comportamento. Embora um balanço volumétrico nulo apenas da fase gás não seja por si só o comportamento esperado quando se considera os efeitos descritos, para desenvolver um balanço mais robusto é necessário considerar as frações líquidas presentes no sistema, agregando maior dificuldade na aquisição e qualidade dos dados.

Rowing Biomechanics: Technique Changes with an Increase of Power Demand

The sport of rowing has become more popular in the past decade. While it is a relatively low impact sport, injuries can occur, specifically to the ribs (Karlson K. A., 1998) and more often in female athletes (Hickey, Fricker, & McDonald , 1997). It has been proposed that as the athlete rows, applying a cyclical load to the body, the mid trapezius fatigues and is unable to resist the force produced during the drive phase (Warden S. J., Gutschlag, Wajswelner, & Crossley, 2002). Once this happens, the scapulae are then pulled anterio-laterally which increases the compression force on the ribs, increasing the risk of injury. The rowing motion of 12 female varsity and club rowers was tracked as they completed a fatiguing rowing test on a rowing ergometer. Results showed that the curvature of thoracic spine changed throughout the rowing cycle but did not change with increasing power level. The transverse shoulder angle decreased (the upper back was less straight) as power level increased (R2=-0.69±19), suggesting that the scapula moved anterio-laterally. This may be that as it tired, the mid-trapezius was unable to hold the scapulae in position. The decreasing transverse shoulder angle when the power level is increased indirectly supports the fatiguing of the retractor muscles as a mechanism of injury. It would be valuable to understand the limitations of each athlete and to be able to prescribe the optimal training zone to reduce the risk of injury.

The European Union and global security: is the EU becoming the indispensable partner? EU Centre Singapore Background Brief No. 11, April 2014

The European Union has developed new capacity as a security actor in third countries, in particular in the area of crisis management. Over the past two decades the EU has deployed numerous missions, both of a civilian and military nature. Moreover the EU has defined its ability to intervene all along the ‘crisis cycle’, (from prevention to mediation, from peace-keeping to post-conflict reconstruction) and using all tools at its disposal (taking a ‘comprehensive approach’). However the EU is still not perceived as a major security provider globally and interventions remain limited to some geographic areas, mostly in its neighbourhood and Africa, with just a few examples further afield. The EU also tends to avoid taking direct action and seems to prefer partnership arrangements with other players. How can we explain the growing activism and number of EU’s intervention with the low impact and lack of visibility? Can we expect the EU to become more active in the future, taking on more responsibility and leading roles in addressing conflict situations? This paper will argue that the main reason for the EU’s hesitant role in crisis management is to be found in the weak decision-making provisions for EU’s security interventions, as one of the few policy areas still subject to consensus amongst 28 European Union Member States. Lack of a clearer delegation of competence or stronger coordination structures is closely linked to low legitimacy for the EU to take more robust action as a security actor. In order to overcome this legitimacy problem, and in order to facilitate consensus amongst Member States, the EU thus privileges partnership arrangements with other actors who can provide legitimacy and know-how, such as the UN or the African Union. As there is no political desire in the EU for tighter decision-making in this area, we can expect that the EU will continue to play a supporting rather than leading role in crisis management, becoming the partner of choice as it deepens its experience. However this does not mean that the EU is playing just a secondary role in the wider area of security, in particular when looking at nontraditional security. Looking at the role of the EU in Asia, where the EU has deployed just two missions, this paper will offer a broader assessment of the EU as a partner in the area of security taking into account different types of actions. The paper will argue that in order to strengthen cooperation with Asian partners in the area of crisis management, the EU will need to define better what it is able to offer, present its actions as part of an overall strategy rather than ad-hoc and piecemeal, and enter into partnership arrangements with different players in the region.

Micromechanics of agglomerate damage processes

This thesis reports a detailed investigation of the micromechanics of agglomerate behaviour under free-fall impact, double (punch) impact and diametrical compression tests using the simulation software TRUBAL. The software is based on the discrete element method (DEM) which incorporates the Newtonian equations of motion and contact mechanics theory to model the interparticle interactions. Four agglomerates have been used: three dense (differing in interface energy and contact density) and one loose. Although the simulated agglomerates are relatively coarse-grained, the results obtained are in good agreement with laboratory test results reported in the literature. The computer simulation results show that, in all three types of test, the loose agglomerate cannot fracture as it is unable to store sufficient elastic energy. Instead, it becomes flattened for low loading-rates and shattered or crushed at higher loading-rates. In impact tests, the dense agglomerates experience only local damage at low impact velocities. Semi-brittle fracture and fragmentation are produced over a range of higher impact velocities and at very high impact velocities shattering occurs. The dense agglomerates fracture in two or three large fragments in the diametrical compression tests. Local damage at the agglomerate-platen interface always occurs prior to fracture and consists of local bond breakage (microcrack formation) and local dislocations (compaction). The fracture process is dynamic and much more complex than that suggested by continuum fracture mechanics theory. Cracks are always initiated from the contact zones and propagate towards the agglomerate centre. Fracture occurs a short time after the start of unloading when a fracture crack "selection" process takes place. The detailed investigation of the agglomerate damage processes includes an examination of the evolution of the fracture surface. Detailed comparisons of the behaviour of the same agglomerate in all three types of test are presented. The particle size distribution curves of the debris are also examined, for both free-fall and double impact tests.

Incorporating Water Sensitive Urban Design (WSUD) practices into the planning context:the conceptual case for lot-scale developments

In recent decades, a number of sustainable strategies and polices have been created to protect and preserve our water environments from the impacts of growing communities. The Australian approach, Water Sensitive Urban Design (WSUD), defined as the integration of urban planning and design with the urban water cycle management, has made considerable advances on design guidelines since 2000. WSUD stormwater management systems (e.g. wetlands, bioretentions, porous pavement etc), also known as Best Management Practices (BMPs) or Low Impact Development (LID), are slowly gaining popularity across Australia, the USA and Europe. There have also been significant improvements in how to model the performance of the WSUD technologies (e.g. MUSIC software). However, the implementation issues of these WSUD practices are mainly related to ongoing institutional capacity. Some of the key problems are associated with a limited awareness of urban planners and designers; in general, they have very little knowledge of these systems and their benefits to the urban environments. At the same time, hydrological engineers should have a better understanding of building codes and master plans. The land use regulations are equally as important as the physical site conditions for determining opportunities and constraints for implementing WSUD techniques. There is a need for procedures that can make a better linkage between urban planners and WSUD engineering practices. Thus, this paper aims to present the development of a general framework for incorporating WSUD technologies into the site planning process. The study was applied to lot-scale in the Melbourne region, Australia. Results show the potential space available for fitting WSUD elements, according to building requirements and different types of housing densities. © 2011 WIT Press.

Growth of U.S. Ecotourism and Its Future in the 1990s

Ecotourism, a new term for low-impact nature travel, is receiving increasing attention. The author has researched the development of the U.S. ecotourism market from 1980-1989 in order to obtain data on the growth of this market segment. Factors involved in the growth of the U.S. ecotourism market are then examined in order to project the growth of this maeket during the 1990's.

Does a mandibular RDP and new maxillary CD improve masticatory efficiency and quality of life in patients with a mandibular Kennedy class I arch?

Objectives To evaluate the change in masticatory efficiency and quality of life of patients treated with mandibular Kennedy class I removable partial dentures (RPDs) and maxillary complete dentures at the Department of Dentistry of the Federal University of Rio Grande do Norte. Materials and methods A total of 33 Kennedy class I patients were rehabilitated with maxillary complete dentures, and mandibular RPDs were selected for this non-randomized prospective intervention study. The patients had a mean age of 59.1 years. Masticatory efficiency was evaluated by colorimetric assay using fuchsin capsules. The measurements were conducted at baseline and 2 and 6 months after prosthesis insertion. Quality of life was evaluated using the Oral Health Impact Profile (OHIP-14) at baseline and 6 months after denture insertion. The Kolmogorov-Smirnov normality test was applied. Masticatory efficiency was evaluated by repeated measures ANOVA. Oral health-related quality of life was compared using the paired t test. Results There was no statistically significant difference in masticatory efficiency after denture insertion (p = 0.101). Significant differences were found (p = 0.010) for oral health-related quality of life. A significant improvement in psychological discomfort (p < 0.01) and psychological disability (p < 0.01) was observed. Mean difference value (95 % confidence interval) was 6.8 (3.8 to 9.7) points, reflecting a low impact of oral health on quality of life, considering the 0–56 range of variation of the OHIP-14 and a Cohen’s d of 1.13. Conclusion According to the results of the present study, rehabilitation with Kennedy class I RPDs and complete dentures did not influence masticatory efficiency but improved oral health-related quality of life. Clinical relevance The association between the patient’s quality of life and the masticatory efficiency is important for treatment predictability.

Crescimento urbano e seus impactos no sistema de drenagem de uma bacia em Natal/RN

The uncontrolled growth of most Brazilian cities is not accompanied by the development of urban infrastructure. With increasing soil sealing, runoff and decreased infiltration volume, impacts on water resources and on population of the areas affected by urban growth are inevitable. This study aims to evaluate the use and occupation of a watershed and analyze the drainage system in order to control the impact using tools to integrate urban development with the drainage of rainwater in an important watershed in the Natal City, Rio Grande do Norte State. The study involved the characterization of the basin XII.4 on the land use and occupation, for the years 2005 and 2014. With the application of SWMM model was possible to analyze the impacts caused by the urbanization process in the existing drainage system, showing the two years analyzed have their areas very close to percentage saturation of impervious areas. Although the region is still predominantly single family residential, suffers increasing verticalization of mainly commercial buildings. The drainage system is inefficient for the area's needs by the year 2005. The drainage system was also tested for four variations of land use by developing scenarios. Scenario 1 is related to the year 2014, considered current. Scenario 2 was adopted the maximum rate of 80% for land use, allowed for the Natal City. Scenario 3 gives the critical condition of land use, with the area 100% impervious. Scenario 4 is applied to the existence of LID (Low Impact Device). The scenarios analysis showed that all indicate deficiency at some point of the drainage system as a result of the high degree of occupation of the area that generate higher flows than the initial drainage system capacity. With the study it became clear that the adoption of non-structural tools are effective in reducing flooding and improving the drainage system capacity.

Crescimento urbano e seus impactos no sistema de drenagem de uma bacia em Natal/RN

The uncontrolled growth of most Brazilian cities is not accompanied by the development of urban infrastructure. With increasing soil sealing, runoff and decreased infiltration volume, impacts on water resources and on population of the areas affected by urban growth are inevitable. This study aims to evaluate the use and occupation of a watershed and analyze the drainage system in order to control the impact using tools to integrate urban development with the drainage of rainwater in an important watershed in the Natal City, Rio Grande do Norte State. The study involved the characterization of the basin XII.4 on the land use and occupation, for the years 2005 and 2014. With the application of SWMM model was possible to analyze the impacts caused by the urbanization process in the existing drainage system, showing the two years analyzed have their areas very close to percentage saturation of impervious areas. Although the region is still predominantly single family residential, suffers increasing verticalization of mainly commercial buildings. The drainage system is inefficient for the area's needs by the year 2005. The drainage system was also tested for four variations of land use by developing scenarios. Scenario 1 is related to the year 2014, considered current. Scenario 2 was adopted the maximum rate of 80% for land use, allowed for the Natal City. Scenario 3 gives the critical condition of land use, with the area 100% impervious. Scenario 4 is applied to the existence of LID (Low Impact Device). The scenarios analysis showed that all indicate deficiency at some point of the drainage system as a result of the high degree of occupation of the area that generate higher flows than the initial drainage system capacity. With the study it became clear that the adoption of non-structural tools are effective in reducing flooding and improving the drainage system capacity.

Rowing Biomechanics: Technique Changes with an Increase of Power Demand

The sport of rowing has become more popular in the past decade. While it is a relatively low impact sport, injuries can occur, specifically to the ribs (Karlson K. A., 1998) and more often in female athletes (Hickey, Fricker, & McDonald , 1997). It has been proposed that as the athlete rows, applying a cyclical load to the body, the mid trapezius fatigues and is unable to resist the force produced during the drive phase (Warden S. J., Gutschlag, Wajswelner, & Crossley, 2002). Once this happens, the scapulae are then pulled anterio-laterally which increases the compression force on the ribs, increasing the risk of injury. The rowing motion of 12 female varsity and club rowers was tracked as they completed a fatiguing rowing test on a rowing ergometer. Results showed that the curvature of thoracic spine changed throughout the rowing cycle but did not change with increasing power level. The transverse shoulder angle decreased (the upper back was less straight) as power level increased (R2=-0.69±19), suggesting that the scapula moved anterio-laterally. This may be that as it tired, the mid-trapezius was unable to hold the scapulae in position. The decreasing transverse shoulder angle when the power level is increased indirectly supports the fatiguing of the retractor muscles as a mechanism of injury. It would be valuable to understand the limitations of each athlete and to be able to prescribe the optimal training zone to reduce the risk of injury.

On the feasibility of time-lapse superconducting gravimetry for reservoir monitoring

The feasibility of monitoring fluid flow subsurface processes that result in density changes, using the iGrav superconducting gravimeter, is investigated. Practical targets include steam-assisted gravity drainage (SAGD) bitumen depletion and water pumping from aquifers, for which there is currently a void in low-impact, inexpensive monitoring techniques. This study demonstrates that the iGrav has the potential to be applied to multi-scale and diverse reservoirs. Gravity and gravity gradient signals are forward modeled for a real SAGD reservoir at two time steps, and for surface-fed and groundwater-fed aquifer pumping models, to estimate signal strength and directional dependency of water flow. Time-lapse gravimetry on small-scale reservoirs exhibits two obstacles, namely, a µgal sensitivity requirement and high noise levels in the vicinity of the reservoir. In this study, both limitations are overcome by proposing (i) a portable superconducting gravimeter, and (ii) a pair of instruments under various baseline geometries. This results in improved spatial resolution for locating depletion zones, as well as the cancellation of noise common in both instruments. Results indicate that a pair of iGrav superconducting gravimeters meet the sensitivity requirements and the spatial focusing desired to monitor SAGD bitumen migration at the reservoir scales. For SAGD reservoirs, the well pair separation, reservoir depth, and survey sampling determine the resolvability of individual well pair depletion patterns during the steam chamber rising phase, and general reservoir depletion patterns during the steam chamber spreading phase. Results show that monitoring water table elevation changes due to pumping and tracking whether groundwater or surface water is being extracted are feasible.