Thermodynamics/dynamics coupling in weakly compressible turbulent stratified fluids

In traditional and geophysical fluid dynamics, it is common to describe stratified turbulent fluid flows with low Mach number and small relative density variations by means of the incompressible Boussinesq approximation. Although such an approximation is often interpreted as decoupling the thermodynamics from the dynamics, this paper reviews recent results and derive new ones that show that the reality is actually more subtle and complex when diabatic effects and a nonlinear equation of state are retained. Such an analysis reveals indeed: (1) that the compressible work of expansion/contraction remains of comparable importance as the mechanical energy conversions in contrast to what is usually assumed; (2) in a Boussinesq fluid, compressible effects occur in the guise of changes in gravitational potential energy due to density changes. This makes it possible to construct a fully consistent description of the thermodynamics of incompressible fluids for an arbitrary nonlinear equation of state; (3) rigorous methods based on using the available potential energy and potential enthalpy budgets can be used to quantify the work of expansion/contraction B in steady and transient flows, which reveals that B is predominantly controlled by molecular diffusive effects, and act as a significant sink of kinetic energy.

Influence of data structure on the estimation of the additive genetic direct and maternal covariance for early growth traits in Nellore cattle

The objective of the present study was to investigate the effect of data structure on estimated genetic parameters and predicted breeding values of direct and maternal genetic effects for weaning weight (WW) and weight gain from birth to weaning (BWG), including or not the genetic covariance between direct and maternal effects. Records of 97,490 Nellore animals born between 1993 and 2006, from the Jacarezinho cattle raising farm, were used. Two different data sets were analyzed: DI_all, which included all available progenies of dams without their own performance; DII_all, which included DI_all + 20% of recorded progenies with maternal phenotypes. Two subsets were obtained from each data set (DI_all and DII_all): DI_1 and DII_1, which included only dams with three or fewer progenies; DI_5 and DII_5, which included only dams with five or more progenies. (Co)variance components and heritabilities were estimated by Bayesian inference through Gibbs sampling using univariate animal models. In general, for the population and traits studied, the proportion of dams with known phenotypic information and the number of progenies per dam influenced direct and maternal heritabilities, as well as the contribution of maternal permanent environmental variance to phenotypic variance. Only small differences were observed in the genetic and environmental parameters when the genetic covariance between direct and maternal effects was set to zero in the data sets studied. Thus, the inclusion or not of the genetic covariance between direct and maternal effects had little effect on the ranking of animals according to their breeding values for WW and BWG. Accurate estimation of genetic correlations between direct and maternal genetic effects depends on the data structure. Thus, this covariance should be set to zero in Nellore data sets in which the proportion of dams with phenotypic information is low, the number of progenies per dam is small, and pedigree relationships are poorly known. (c) 2012 Elsevier B.V. All rights reserved.

Efeitos da senescência no núcleo supraquiasmático do sagui (Callithrix Jacchus): plasticidade morfológica e neuroquímica

The circadian timing system (CTS) is responsible for the generation and synchronization and the suprachiasmatic nucleus (SCN) of the hypothalamus has been described as the major circadian pacemaker in many mammalian species. The internal temporal organization managed by SCN is disturbed with aging bringing many pathological disorders that range from loss of complex cognitive performance to simple physiological functions. Therefore, our aim was perform a comparative study of the morphological aspects and neurochemical composition in the SCN of marmosets (Callithrix jacchus) adults and older using immunohistochemical techniques. We found morphometric and neurochemical changes in th SCN o folder animals in comparison to adults, among these a possible decreased in retinal projection to the SCN of older animals, found through a decline in CTB immunostaining, which can occur due atrophy and/or decreasing of fibers from the retinohypothalamic tract (RHT). The Klüver-Barrera histological technique strongly suggests a decrease in those fibers from RHT. Also, by means of a morphometric study, it is found a atrophy and numerical decline of neurons in SCN of aged animals, investigated by Nissl technique, and immunostaining with NeuN and calbindin. Relative optical density (ROD) analysis were used to evaluate the expression of some neurochemical components in SCN, such as GFAP expression, which was increased in older, result that indirectly reinforces that morphological changes occurs due the aging; the vasoactive intestinal polipeptide (VIP) showed no expression alteration in SCN of older animals; the serotonin (5-HT) was descreased in the dorsomedial portion of the SCN, and neurpeptide Y (NPY) apparently also decrease due to the increase of age. Many of these modifications were seen in other animals, such as rodents, human primates and non-human primates. These data about marmoset comes to add new information of the effect of aging on structures responsibles for the circadian rhytmicity, and that some behavioral changes controlled by th SCN, and founded in aged animals, may be caused by these morphological and neurochemical changes. Although some results have been quantitatively negative, qualitatively all analysis show significant change comparing adult and older animals, perhaps due to a low sampling number. In conclusion, the marmoset presents several morphological and neurochemical changes in the SCN of aged animals compared to adults, which may result in behavioral changes that favor pathology aging related

Evolutionary dynamics of heterochromatin in the genome of Dichotomius beetles based on chromosomal analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A síndrome de Williams-Beuren: contribuições à avaliação clínica e genômica

Pós-graduação em Ciências Biológicas (Genética) - IBB

Avaliação de métodos eletromagnéticos aplicando campos polarizados e focalizados

Em investigações geofísicas rasas que empregam os métodos eletromagnéticos indutivos mais avançados, alvos com baixo número de indução (Low Induction Number – LIN) produzem anomalias eletromagnéticas muito baixas e de difícil interpretação. Para suprir esta deficiência, neste trabalho são estudados a aplicabilidade de campos eletromagnéticos polarizados e focalizados – POLFOCEM como fonte primária de indução. Os campos E.M. focalizados e polarizados, vertical e horizontalmente, são obtidos pelas combinações vetoriais de pares de dipolos transmissores e, ocorrem na região central entre eles. A focalização é observada nesta região na profundidade de 0,25 do espaçamento entre esses transmissores – L. Portanto, máximos acoplamentos podem ser obtidos através da seleção da polarização de acordo com a geometria do alvo, ocorrendo um aumento na densidade de fluxo magnético sobre ele e, máximas anomalias produzidas. É utilizada uma metodologia numérica para o cômputo dessas anomalias por meio da técnica dos elementos finitos para solução do problema 2,5-D. Em todos os experimentos numéricos são realizadas comparações qualitativas e quantitativas entre as respostas obtidas pelos sistemas POLFOCEM e convencional, o qual emprega um único dipolo como transmissor (dipolo-dipolo). As anomalias produzidas pelo sistema POLFOCEM, em que os dipolos transmissores são acionados simultaneamente, correspondem à soma das anomalias produzidas por cada um desses dipolos independentes, caracterizando, desta forma, a linearidade dos campos eletromagnéticos. Os experimentos numéricos são realizados para alvos prismáticos bidimensionais com três diferentes inclinações, inseridos num semi-espaço resistivo, e para as freqüências das fontes na faixa das ondas de rádio. As anomalias assimétricas no sistema convencional, que se tornam simétricas no sistema POLFOCEM, apresentam valores menores em amplitude. Contudo, aquelas anomalias tanto assimétricas quanto simétricas que se tornam anti-simétricas apresentam valores maiores. Em decorrência dessas diminuições e aumentos nas amplitudes ocorrem rotações nos diagramas de Argand, no sentido horário e anti-horário para alvos com baixos valores de condutividade, respectivamente. Em experimentos de identificação de presença de dois alvos próximos, o sistema convencional é capaz de identificá-los primeiramente, prevalecendo o seu uso.

Desenvolvimento de um conjunto de modelagem de alta resolução para os métodos eletromagnéticos indutivos

A Modelagem Eletromagnética Analógica tem sido uma poderosa ferramenta no estudo das respostas eletromagnéticas de uma grande variedade das técnicas de levantamentos e de modelos geológicos. Nas aplicações de métodos eletromagnéticos nas investigações de contaminação no subsolo, recentemente em grande demanda, são obtidas anomalias muito baixas (da ordem de 0,01% do campo primário). Com o objetivo de estudar em laboratório os problemas de levantamentos eletromagnéticos para alvos de baixo número de indução, um conjunto de modelagem em escala reduzida de alta sensibilidade, foi projetado e construído. Este conjunto opera na faixa de freqüência de 1 kHz até 1 MHz com excelente linearidade. O transdutor de transmissão gera suficiente densidade de fluxo magnético com corrente de até 3 App (pico a pico) circulando nele. O sistema de recepção, isto é, o conjunto de bobinas receptoras mais o pré-amplificador acoplado apresenta sensibilidade 3 V/A/m na freqüência de 10 kHz com inclinação de 20 dB/dec de freqüência. A alta sensibilidade do sistema de recepção combinada com a boa capacidade de geração do sistema transmissor, permite alcançar a resolução de 0,025% do campo primário. O conjunto dispõe ainda, de um sistema mecânico que permite posicionar o sistema de transdutores (transmissor e receptor) em posições arbitrárias com resolução de 1 mm e precisão de 0,05 mm. A precisão no deslocamento linear do sistema de sonda numa linha de 1715 mm de comprimento é alcançada por meio de um motor de passo controlado por um microcontrolador, que é rigidamente acoplado a um fuso que converte o movimento angular do motor em movimento linear. Com este conjunto, é possível simular uma grande variedade de técnicas de levantamentos eletromagnéticos no formato Slingram, isto é, dipolo-dipolo. Além da boa resolução mecânica e boa resolução de medida eletromagnética do conjunto, todo o processo de controle e aquisição de dados é operacionalizado por meio de um computador mestre.

Investigação geofísica ambiental e forense nos cemitérios do Benguí e do Tapanã (Belém - PA)

A Geofísica é uma ferramenta útil no estudo da contaminação de água provocada por cemitérios, assim como na investigação criminalística. A contaminação provocada por cemitérios é um tema ainda pouco estudado. Por outro lado, Geofísica forense é quase desconhecida no Brasil. Para estudar esses dois temas – cemitérios e alvos forenses – foram eleitos dois cemitérios públicos: o cemitério do Bengui, já desativado, e o cemitério do Tapanã. A investigação geofísica nos dois Cemitérios foi realizada por meio dos métodos eletromagnéticos ground penetrating radar (GPR) e Slingram de baixo número de indução (low induction number – LIN). No Cemitério do Bengui, testou-se o GPR na detecção do nível hidrostático, visto que, na implantação de um Cemitério, a informação mais importante é a profundidade do aquífero. No Cemitério do Tapanã, onde foi implantado o Campo de Testes controlados para Geofísica Forense, Ambiental e de Resgate, denominado FORAMB, utilizou-se GPR e Slingram em levantamentos mensais a fim de detectar o nível hidrostático, monitorar o desenvolvimento da contaminação e, especialmente, encontrar alvos forenses (um cadáver, uma caixa simulando um túnel e uma caixa com ferros simulando armas). O GPR mostrou-se eficaz em todos os estudos, especialmente na delineação dos alvos forenses. O Slingram não forneceu informações úteis.

The influence of citrus rootstocks on the relationship between the mite Brevipalpus phoenicis and citrus leprosis disease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização química, física e anatômica do bambu Guadua tagoara para polpação Kraft

Pós-graduação em Engenharia Mecânica - FEG

Análise da confiabilidade do ensaio de identificação de ligas através de espectrometria por fluorescência de raios x

In chemical industry, petrochemical and oil refinery may be found situations that working pressures and very high temperatures, and alloys that comprise such equipment must have specific characteristics such. As a way to ensure that the materials are as designed, companies have some specific techniques, and one of them is X-ray fluorescence spectrometry, which allows its application in devices small and lightweight, which ensures its portability in field use. This technique however, has some shortcomings such as the impossibility of detecting carbon and other elements of low atomic number which can generate false identifications of elements that are not in the league or non-detection of existing elements. Therefore, this study investigated the reliability of this method using the apparatus Niton XL3t 800 and may conclude that their results are reliable and can be used to assist in ensuring the operational integrity of the production units of these companies

Structure, organization, and expression of the alpha prolamin multigenic family bring new insights into the evolutionary relationships among grasses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spurious transients of projection methods in microflow simulations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spin Orbit Effects in the Electronic Transport Properties of Adsorbed Graphene Nanoribbons

Graphene has received great attention due to its exceptional properties, which include corners with zero effective mass, extremely large mobilities, this could render it the new template for the next generation of electronic devices. Furthermore it has weak spin orbit interaction because of the low atomic number of carbon atom in turn results in long spin coherence lengths. Therefore, graphene is also a promising material for future applications in spintronic devices - the use of electronic spin degrees of freedom instead of the electron charge. Graphene can be engineered to form a number of different structures. In particular, by appropriately cutting it one can obtain 1-D system -with only a few nanometers in width - known as graphene nanoribbon, which strongly owe their properties to the width of the ribbons and to the atomic structure along the edges. Those GNR-based systems have been shown to have great potential applications specially as connectors for integrated circuits. Impurities and defects might play an important role to the coherence of these systems. In particular, the presence of transition metal atoms can lead to significant spin-flip processes of conduction electrons. Understanding this effect is of utmost importance for spintronics applied design. In this work, we focus on electronic transport properties of armchair graphene nanoribbons with adsorbed transition metal atoms as impurities and taking into account the spin-orbit effect. Our calculations were performed using a combination of density functional theory and non-equilibrium Greens functions. Also, employing a recursive method we consider a large number of impurities randomly distributed along the nanoribbon in order to infer, for different concentrations of defects, the spin-coherence length.

Nuovi catalizzatori per l'idrogenazione, l'idrogenolisi/ring-opening di composti aromatici policiclici

The removal of aromatic hydrocarbons from diesel has received considerable attention after environmental regulations that require petroleum refiners to raise cetane number and to limit aromatics in diesel fuel in order to improve combustion efficiency and reduce particulate and NOx emissions. An alternative is blending with Fischer–Tropsch (FT) gas-to-liquid diesel fuel; however, this option may not be economically viable solution in case of extensive blend. Another alternative is to incorporate in the diesel pool a greater fraction of the so-called light cycle oil (LCO). Due to its high aromatics content and its low cetane number (typically between 20 and 30), the incorporation of LCO may have a negative impact on the quality of diesel. Current technologies for LCO improvement are based on hydrogenation to adjust both sulphur and cetane number but while an important fraction of the aromatics present in LCO can be saturated in a deep hydrogenation process, the cetane number may still be lower than the target values specified in diesel legislations, so further upgrading is needed. An interesting technology for improving the cetane number of diesels and maintaining meanwhile high diesel yields is achieved by combining a complete hydrogenation process with a selective ring opening (SRO) reaction of the naphthenic rings. The SRO can be defined as naphthene ring-opening to form compounds with high cetane number, but without any carbon losses. Controlling the interconversion of six- and five- membered rings via an acid-catalyzed ring-contraction step is also of great importance, since selective conversion of six-membered to five-membered naphthene rings greatly influences ring-opening rates and selectivity. High intrinsic activity may be enhanced by deposition of noble metals on acidic, high surface area supports, because it is possible to arrange close proximity of the metal and acid sites. Moreover, in large-pore supports, the diffusion resistance of liquid reactants into the pores is minimized. In addition to metal centres, the acid sites of support also plays role in aromatics hydrogenation. However, the functions of different kinds of acid sites (Brønsted vs. Lewis acidity), and their optimal concentrations and strengths, remain unclear. In the present study we investigated the upgrading of an aromatic-rich feedstock over different type of metal supported on mesoporous silica-alumina. The selective hydrogenolysis and ring opening of tetrahydronaphthalene (THN or tetralin) was carried out as representative of LCO fractions after deep hydrogenation process. In this regards the aim of this study is to evaluate both the effect of metals and that of the supports characterized by different acid distribution and strength, on conversion and selectivity. For this purpose a series of catalysts were prepared by impregnation. The catalysts were characterized and conversion tests of THN were performed in a lab-scale plant operating in the pressure range from 7.0-5.0 MPa and in the temperature range from 300 to 360°C.