Application times, sources and doses of nitrogen on wheat cultivars under no till in the Cerrado region

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alternative paths for insertion of probes into high inclination lunar orbits

The dynamics of the restricted three-body Earth-Moon-particle problem predicts the existence of direct periodic orbits around the Lagrangian equilibrium point L1. From these orbits, we derive a set of trajectories that form links between the Earth and the Moon and are capable of performing transfers between terrestrial and lunar orbits, in addition to defining an escape route from the Earth-Moon system. When we consider a more complex and realistic dynamical system - the four-body Sun-Earth-Moon-particle (probe) problem - the trajectories have an expressive gain of inclination when they penetrate in the lunar influence sphere, thus allowing the insertion of probes into low-altitude lunar orbits with high inclinations, including polar orbits. In this study, we present these links and investigate some possibilities for performing an Earth-Moon transfer based on these trajectories. (C) 2007 COSPAR. Published by Elsevier Ltd. All rights reserved.

Influence of nonsphericity of planetary satellites and perturbation of the third-body on the artificial satellites motion

Some orbital characteristics of lunar artificial satellites is presented taking into account the perturbation of the third-body in elliptical orbit and the non-uniform distribution of mass of the Moon. We consider the development of the non-sphericity of the Moon in zonal spherical harmonics up to the ninth order and sectorial harmonic C 22 due to the lunar equatorial ellipticity. The motion of the artificial satellite is studied under the single-averaged analytical model. The average is applied to the mean anomaly of the satellite to analyze low-altitude orbits which are of highest importance for future lunar missions. We found families of frozen orbits with long lifetimes for the problem of an orbiter travelling around the Moon.

Comparação de métodos de mapeamento da distribuição espacial da infestação de plantas daninhas

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Efeitos de maré no movimento orbital de satélites artificiais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Doses, fontes e épocas de aplicação do nitrogênio em cultivares de trigo sob plantio direto no cerrado

Pós-graduação em Agronomia - FEIS

Variabilidade pluviométrica e a dinâmica atmosférica na bacia hidrográfica do rio Ivaí-PR

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Unidades de relevo em zona costeira estuarina: municípios de Colares e Santo Antônio do Tauá

Este trabalho tem por objetivo identificar e discutir as unidades de relevo dos municípios de Colares e Santo Antônio do Tauá, Estado do Pará, Brasil. Apresenta como objeto de estudo a compartimentação do relevo. A área de estudada se localiza na parte oriental do Golfão Marajoara, porção nordeste da baía de Marajó, em um trecho tipicamente estuarino da zona costeira. A pesquisa foi realizada com base em revisão de literatura, levantamento cartográfico, tratamento, interpretação e vetorização de imagens orbitais e trabalhos de campo. Duas escalas de análise foram trabalhadas. A primeira escala referiu-se à Zona Costeira Amazônica (ZCA), caracterizada por ser uma costa baixa, predominantemente sedimentar, sujeita a regime de macromarés em sua maior parte e fortemente influenciada pelas descargas fluviais condicionadas pelo clima úmido. A formação regional desta costa deve-se às flutuações do nível relativo do mar, oscilações climáticas e à neotectônica, atuantes ao longo do Cenozóico Superior. A porção oriental do Golfão Marajoara é constituída pelo estuário do rio Pará, que se comporta como um tidal river ou estuário dominado por correntes fluviais, apesar da influência das marés. As descargas fluviais são o fator principal da hidrodinâmica estuarina, constituição sedimentar e organização da biota. Trata-se de um ambiente costeiro mais protegido da ação de ondas e da deriva litorânea, em comparação com o litoral atlântico do Nordeste do Pará. Na segunda escala de trabalho foram identificadas 8 unidades de relevo: leito estuarino arenoso; banco lamoso de intermaré; planície de maré lamosa; praia estuarina; cordão arenoso; planície aluvial sob influência de maré; planície aluvial; tabuleiro. Apenas a unidade do tabuleiro é considerada como relevo erosivo. A seguir, discutiu-se a distribuição espacial das unidades de relevo, que mostrou a presença de dois setores específicos. O setor 1, situado a oeste, é amplamente influenciado por marés, e nele predominam formas de relevo de acumulação, com destaque para as planícies aluviais sob influência de maré, que ocupam maior área, fato que revela um esquema de transição entre o domínio marinho e o flúviocontinental. As várzeas sucedem os mangues para o interior, à medida que diminui a influência da água salgada. O esquema básico de distribuição sedimentar é representado por areias de fundo de canal e lamas depositadas nas margens durante a maré baixa. As praias são reduzidas, o que se explica pela menor atuação de ondas, e pelo papel decisivo das correntes de maré e das vazantes na dinâmica costeira. Cordões arenosos localizados no interior da planície costeira são o testemunho da progradação da linha de costa. Neste setor, os tabuleiros encontramse muito fragmentados, em consequência da erosão e sedimentação por marés, canais e águas das chuvas. O setor 2, a leste, não sofre influência de marés, e apresenta um relevo menos compartimentado, com tabuleiros seccionados pela rede de drenagem. A dissecação fluvial forma vales com estreitas planícies aluviais, fato que revela uma superfície erosiva mais ampla.

Adubação com KCl revestido na cultura do milho no Cerrado

The use of coated potassium chloride can provide greater absorption of potassium resulting in the alteration of leaf contents, production components and grain yield. The objective of this study was to evaluate the effect of potassium doses using potassium chloride conventional or coated by polymer, in the corn crop under conditions of brazilian Savanna with low altitude. The experiment was conducted in Selviria, MS, Brazil, in a clayey Oxisol. The treatments consisted of four doses of K2O (0, 40, 80 and 120 kg ha(-1)), applied at sowing, and two sources: potassium chloride and potassium chloride coated by polymers. A randomized block design with eight treatments and four replications was used. The coated KCl is not efficient under the soil and climatic conditions studied, because it provided results similar to the conventional KCl for the K foliar content, crop components and grain yield of irrigated corn. The increment of K2O doses influenced positively the K and chlorophyll leaf contents, plant and spike insertion height and the number of rows and grains per spike. The maximum mean yield obtained was with 83.5 kg ha(-1) of K2O.

Liberação de nutrientes da palhada de forrageiras consorciadas com milho e sucessão com soja

In tropical regions there is rapid decomposition of plant material deposited on the soil, and the ability to recycle nutrients through this decomposition is one of the most important aspects of cover crops. The aim of this study was to evaluate the yield and nutrient release from forage crops intercropped with maize for silage, and soybean in succession. The study was conducted in the experimental area of Universidade Estadual Paulista, Ilha Solteira campus, Brazil. The experiment consisted of maize for silage intercropped with four forage species (Urochloa brizantha cv. Marandu, Urochloa ruziziensis, Panicum maximum cv. Tanzania, and Panicum maximum cv. Aries) sown in three modalities: in the maize row, together with fertilizer; broadcast at maize sowing; and broadcast in the V4 stage of maize, in a randomized block design in a 4 x 3 factorial arrangement with four replications. The evaluation of nutrient release was performed during the soybean cropping that followed the intercropping by the litter bag method at 30, 60, 90, and 120 days after sowing of soybean. Panicum maximum cv. Tanzania showed higher dry matter yield when sown by broadcasting at maize sowing. Sowing of forages in the maize row, and through broadcasting at maize sowing led to greater dry matter yield for straw formation. Intercropping of maize with forages in the autumn is an alternative for increasing the amount of straw and cycling of macronutrients in a no-till system. Potassium was the nutrient with the greatest accumulation in the forage straws (up to 150 kg ha(-1)), with 100 % release at 90 days after sowing soybean. The forage straws are thus an excellent alternative for cycling of this nutrient. Panicum maximum cv. Tanzania sown by broadcasting at the time of maize sowing showed greater phosphorus cycling (13 kg ha(-1)). Panicum maximum cv. Tanzania broadcast in the V4 stage of maize is the option with least potential for straw production and nutrient cycling, while the other options (forages and sowing modalities) have higher potential for use, at the criteria of machine availability for setting up intercropping with corn.

Acúmulo de nutrientes e tempo de decomposição da palhada de espécies forrageiras em função de épocas de semeadura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Erosion rates and landscape evolution of the lowlands of the Upper Paraguay river basin (Brazil) from cosmogenic Be-10

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Doses, fontes e épocas de aplicação de nitrogênio influenciando teores de clorofila e produtividade do trigo

To achieve high wheat yield, correct management of N fertilization and the use of high yield potential cultivars are necessary. The aim of this study was to evaluate the effects of different application rates and sources of N, applied totally at sowing or in topdressing, on grain yield and yield components of two irrigated wheat cultivars under a no-till system, grown in a Cerrado (Brazilian tropical savanna) region of low altitude. A randomized block design was used in a 5 x 3 x 2 x 2 factorial arrangement with three replications, combining five levels of N (0, 50, 100, 150, and 200 kg ha(-1)), three sources of N (Entec (R), ammonium sulfate, and urea), and two application times (at sowing, near the rows, or in topdressing) in two wheat cultivars (IAC 370 and Embrapa 21). The wheat cultivars had similar grain yields. There was no difference among the sources of N for grain yield and yield components. The N applied totally at sowing did not differ from the traditional application at sowing and in topdressing for production of irrigated wheat in no-tillage. The increase in application rates of N increased the leaf N contents and chlorophyll, plant height, and the number of ears per m(2). Grain yield of the wheat cultivars IAC 370 and Embrapa 21 increased up to the application rates of 134 and 128 kg ha(-1) of N, respectively, regardless of application time and source of N. The positive correlation between chlorophyll leaf content and grain yield in accordance with N fertilization levels indicates that N fertilization in topdressing can be recommended based on SPAD readings of leaf chlorophyll performed at 38 days after wheat plant emergence.

Desempenho agronômico do milho e do trigo em função da inoculação com azospirillum brasilense e doses e fontes de nitrogênio

Pós-graduação em Agronomia - FEIS

Fog- and cloud-induced aerosol modification observed by the Aerosol Robotic Network (AERONET)

Large fine mode-dominated aerosols (submicron radius) in size distributions retrieved from the Aerosol Robotic Network (AERONET) have been observed after fog or low-altitude cloud dissipation events. These column-integrated size distributions have been obtained at several sites in many regions of the world, typically after evaporation of low-altitude cloud such as stratocumulus or fog. Retrievals with cloud-processed aerosol are sometimes bimodal in the accumulation mode with the larger-size mode often similar to 0.4-0.5 mu m radius (volume distribution); the smaller mode, typically similar to 0.12 to similar to 0.20 mu m, may be interstitial aerosol that were not modified by incorporation in droplets and/or aerosol that are less hygroscopic in nature. Bimodal accumulation mode size distributions have often been observed from in situ measurements of aerosols that have interacted with clouds, and AERONET size distribution retrievals made after dissipation of cloud or fog are in good agreement with particle sizes measured by in situ techniques for cloud-processed aerosols. Aerosols of this type and large size range (in lower concentrations) may also be formed by cloud processing in partly cloudy conditions and may contribute to the "shoulder" of larger-size particles in the accumulation mode retrievals, especially in regions where sulfate and other soluble aerosol are a significant component of the total aerosol composition. Observed trends of increasing aerosol optical depth (AOD) as fine mode radius increased suggests higher AOD in the near-cloud environment and higher overall AOD than typically obtained from remote sensing owing to bias toward sampling at low cloud fraction.