Syntheses, x-ray structures, photochemistry, redox properties, and DFT calculations of interconvertible fac- and mer-[Mn(SPS)(CO)3] isomers containing a flexible SPS-based pincer ligand

The lithium salt of the anionic SPS pincer ligand composed of a central hypervalent lambda(4)-phosphinine ring bearing two ortho-positioned diphenylphosphine sulfide side arms reacts with [Mn(CO)(5)Br] to give fac-[Mn(SPS)(CO)(3)], This isomer can be converted photochemicaily to mer-[Mn(SPS)(CO)(3)], with a very high quantum yield (0.80 +/- 0.05). The thermal backreaction is slow (taking ca. 8 h at room temperature), in contrast to rapid electrodecatalyzed mer-to-fac isomerization triggered by electrochemical reduction of mer-[Mn(SPS)(CO)(3)]. Both geometric isomers of [Mn(SPS)(CO)(3)] have been characterized by X-ray crystallography. Both isomers show luminescence from a low-lying (IL)-I-3 (SPS-based) excited state. The light emission of fac-[Mn(SPS)(CO)(3)] is largely quenched by the efficient photoisomerization occurring probably from a low-lying Mn-CO dissociative excited state. Density functional theory (DFT) and time-dependent DFT calculations describe the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of fac- and mer-[Mn(CO)(3)(SPS)] as ligand-centered orbitals, largely localized on the phosphinine ring of the SPS pincer ligand. In line with the ligand nature of its frontier orbitals, fac-[Mn(SPS)(CO)(3)] is electrochemically reversibly oxidized and reduced to the corresponding radical cation and anion, respectively. The spectroscopic (electron paramagnetic resonance, IR, and UV-vis) characterization of the radical species provides other evidence for the localization of the redox steps on the SIPS ligand. The smaller HOMO-LUMO energy difference in the case of mer-[Mn(CO)(3)(SPS)], reflected in the electronic absorption and emission spectra, corresponds with its lower oxidation potential compared to that of the fac isomer. The thermodynamic instability of mer-[Mn(CO)(3)(SPS)], confirmed by the DFT calculations, increases upon one-electron reduction and oxidation of the complex.

Quantitative single-molecule localization microscopy combined with rule-based modeling reveals ligand-induced TNF-R1 reorganization toward higher-order oligomers

We report on the assembly of tumor necrosis factor receptor 1 (TNF-R1) prior to ligand activation and its ligand-induced reorganization at the cell membrane. We apply single-molecule localization microscopy to obtain quantitative information on receptor cluster sizes and copy numbers. Our data suggest a dimeric pre-assembly of TNF-R1, as well as receptor reorganization toward higher oligomeric states with stable populations comprising three to six TNF-R1. Our experimental results directly serve as input parameters for computational modeling of the ligand-receptor interaction. Simulations corroborate the experimental finding of higher-order oligomeric states. This work is a first demonstration how quantitative, super-resolution and advanced microscopy can be used for systems biology approaches at the single-molecule and single-cell level.

Evidence from neurolinguistic methodologies: can it actually inform linguistic/ language acquisition theories and translate to evidence-based applications?

This special issue is a testament to the recent burgeoning interest by theoretical linguists, language acquisitionists and teaching practitioners in the neuroscience of language. It offers a highly valuable, state-of-the-art overview of the neurophysiological methods that are currently being applied to questions in the field of second language (L2) acquisition, teaching and processing. Research in the area of neurolinguistics has developed dramatically in the past twenty years, providing a wealth of exciting findings, many of which are discussed in the papers in this volume. The goal of this commentary is twofold. The first is to critically assess the current state of neurolinguistic data from the point of view of language acquisition and processing—informed by the papers that comprise this special issue and the literature as a whole—pondering how the neuroscience of language/processing might inform us with respect to linguistic and language acquisition theories. The second goal is to offer some links from implications of exploring the first goal towards informing language teachers and the creation of linguistically and neurolinguistically-informed evidence-based pedagogies for non-native language teaching.

A molecular mechanism for Lys(49)-phospholipase A(2) activity based on ligand-induced conformational change

Agkistrodon contortrix laticinctus myotoxin is a Lys(49)- phospholipase A(2) (EC 3.1.1.4) isolated from the venom of the serpent A contortrix laticinctus (broad-banded copperhead). We present here three monomeric crystal structures of the myotoxin, obtained under different crystallization conditions. The three forms present notable structural differences and reveal that the presence of a ligand in the active site (naturally presumed to be a fatty acid) induces the exposure of a hydrophobic surface (the hydrophobic knuckle) toward the C terminus. The knuckle in A contortrix laticinctus myotoxin involves the side chains of Phe(121) and Phe(124) and is a consequence of the formation of a canonical structure for the main chain within the region of residues 118-125. Comparison with other Lys(49)-phospholipase A(2) myotoxins shows that although the knuckle is a generic structural motif common to all members of the family, it is not readily recognizable by simple sequence analyses. An activation mechanism is proposed that relates fatty acid retention at the active site to conformational changes within the C-terminal region, a part of the molecule that has long been associated with Ca2+-independent membrane damaging activity and myotoxicity. This provides, for the first time, a direct structural connection between the phospholipase active site and the C-terminal myotoxic site, justifying the otherwise enigmatic conservation of the residues of the former in supposedly catalytically inactive molecules.

Organosilylated complex [Eu(TTA)3(Bpy-Si)]: A bifunctional moiety for the engeneering of luminescent silica-based nanoparticles for bioimaging

A new highly luminescent europium complex with the formula [Eu(TTA) 3(Bpy-Si)], where TTA stands for the thenoyltrifluoroacetone, (C 4H3S)COCH2COCF3, chelating ligand and Bpy-Si, Bpy-CH2NH(CH2)3Si(OEt)3, is an organosilyldipyridine ligand displaying a triethoxysilyl group as a grafting function has been synthesized and fully characterized. This bifunctional complex has been grafted onto the surface of dense silica nanoparticles (NPs) and on mesoporous silica microparticles as well. The covalent bonding of [Eu(TTA)3(Bpy-Si)] inside uniform Stöber silica nanoparticles was also achieved. The general methodology proposed could be applied to any silica matrix, allowed high grafting ratios that overcome chelate release and the tendency to agglomerate. Luminescent silica-based nanoparticles SiO2-[Eu(TTA)3(Bpy-Si)], with a diameter of 28 ± 2 nm, were successfully tested as a luminescent labels for the imaging of Pseudomonas aeruginosa biofilms. They were also functionalized by a specific monoclonal antibody and subsequently employed for the selective imaging of Escherichia coli bacteria. © 2013 American Chemical Society.

Organic light emitting diodes with europium (III) emissive layers based on beta-diketonate complexes: The influence of the central ligand

This work shows a comparative study of organic light emitting diodes based on four different europium complexes with the general formula, Eu(CLs)(3)bipyridine, where the central ligands are DBM [tris(dibenzoylmethane)], TTA [tris(1-(2-thieneyl)-4,4,4-trifluoro-1,3-butanedione)], NTA [tris(1-(2-naphthoyl)-3,3,3-trifluoroacetone)] and BTA [tris(1-(2-benzoyl)-3,3,3-trifluoroacetone)]. All devices have a driving voltage of 14-16 V, a very low electrical current at normal operation (less than 1 mA) and a good Wall Plug Efficiency (up to near 10(-3)%). The most suitable central ligand was found to be DBM, with an optical power up to 200 nW (at 612 nm). The BTA exhibits the lowest stability under high applied voltages. The other central ligands have similar results among them. The electroluminescence spectra clearly show the europium ion transitions (with a strong (5)D(0) -> (7)F(2) line) with a CIE color coordinate around (0.56, 0.34). (C) 2008 Elsevier B.V. All rights reserved.

Ligand- and Structure-Based Drug Design Strategies and PPAR delta/alpha Selectivity

Peroxisome-proliferator-activated receptors are a class of nuclear receptors with three subtypes: a, ? and d. Their main function is regulating gene transcription related to lipid and carbohydrate metabolism. Currently, there are no peroxisome-proliferator-activated receptors d drugs being marketed. In this work, we studied a data set of 70 compounds with a and d activity. Three partial least square models were created, and molecular docking studies were performed to understand the main reasons for peroxisome-proliferator-activated receptors d selectivity. The obtained results showed that some molecular descriptors (log P, hydration energy, steric and polar properties) are related to the main interactions that can direct ligands to a particular peroxisome-proliferator-activated receptors subtype.

A fragment-based approach for ligand binding affinity and selectivity for the liver X receptor beta

Selective modulation of liver X receptor beta (LXR beta) has been recognized as an important approach to prevent or reverse the atherosclerotic process. In the present work, we have developed robust conformation-independent fragment-based quantitative structure-activity and structure-selectivity relationship models for a series of quinolines and cinnolines as potent modulators of the two LXR sub-types. The generated models were then used to predict the potency of an external test set and the predicted values were in good agreement with the experimental results, indicating the potential of the models for untested compounds. The final 2D molecular recognition patterns obtained were integrated to 3D structure-based molecular modeling studies to provide useful insights into the chemical and structural determinants for increased LXR beta binding affinity and selectivity. (C) 2011 Elsevier Inc. All rights reserved.

Methodologies for Synthesizable Programmable Devices based on Multi-Stage Switching Networks

Nowadays the rise of non-recurring engineering (NRE) costs associated with complexity is becoming a major factor in SoC design, limiting both scaling opportunities and the flexibility advantages offered by the integration of complex computational units. The introduction of embedded programmable elements can represent an appealing solution, able both to guarantee the desired flexibility and upgradabilty and to widen the SoC market. In particular embedded FPGA (eFPGA) cores can provide bit-level optimization for those applications which benefits from synthesis, paying on the other side in terms of performance penalties and area overhead with respect to standard cell ASIC implementations. In this scenario this thesis proposes a design methodology for a synthesizable programmable device designed to be embedded in a SoC. A soft-core embedded FPGA (eFPGA) is hence presented and analyzed in terms of the opportunities given by a fully synthesizable approach, following an implementation flow based on Standard-Cell methodology. A key point of the proposed eFPGA template is that it adopts a Multi-Stage Switching Network (MSSN) as the foundation of the programmable interconnects, since it can be efficiently synthesized and optimized through a standard cell based implementation flow, ensuring at the same time an intrinsic congestion-free network topology. The evaluation of the flexibility potentialities of the eFPGA has been performed using different technology libraries (STMicroelectronics CMOS 65nm and BCD9s 0.11μm) through a design space exploration in terms of area-speed-leakage tradeoffs, enabled by the full synthesizability of the template. Since the most relevant disadvantage of the adopted soft approach, compared to a hardcore, is represented by a performance overhead increase, the eFPGA analysis has been made targeting small area budgets. The generation of the configuration bitstream has been obtained thanks to the implementation of a custom CAD flow environment, and has allowed functional verification and performance evaluation through an application-aware analysis.

Methodologies for the Analysis of HCV-Specific CD4(+) T Cells

Virus-specific CD4(+) T cells play a major role in viral infections, such as hepatitis C virus (HCV). Viral clearance is associated with vigorous and multi-specific CD4(+) T-cell responses, while chronic infection has been shown to be associated with weak or absent T-cell responses. Most of these studies have used functional assays to analyze virus-specific CD4(+) T-cell responses; however, these and other detection methods have various limitations. Therefore, the important question of whether virus-specific CD4(+) T cells are completely absent or primarily impaired in specific effector functions during chronic infection, has yet to be analyzed in detail. A novel assay, in which virus-specific CD4(+) T-cell frequencies can be determined by de novo CD154 (CD40 ligand) expression in response to viral antigens, can help to overcome some of the limitations of functional assays and restrictions of multimer-based methods. This and other current established methods for the detection of HCV-specific CD4(+) T cells will be discussed in this review.

Diffractive optics-based heterodyne-detected four-wave mixing signals of protein motion: From “protein quakes” to ligand escape for myoglobin

Ligand transport through myoglobin (Mb) has been observed by using optically heterodyne-detected transient grating spectroscopy. Experimental implementation using diffractive optics has provided unprecedented sensitivity for the study of protein motions by enabling the passive phase locking of the four beams that constitute the experiment, and an unambiguous separation of the Real and Imaginary parts of the signal. Ligand photodissociation of carboxymyoglobin (MbCO) induces a sequence of events involving the relaxation of the protein structure to accommodate ligand escape. These motions show up in the Real part of the signal. The ligand (CO) transport process involves an initial, small amplitude, change in volume, reflecting the transit time of the ligand through the protein, followed by a significantly larger volume change with ligand escape to the surrounding water. The latter process is well described by a single exponential process of 725 ± 15 ns at room temperature. The overall dynamics provide a distinctive signature that can be understood in the context of segmental protein fluctuations that aid ligand escape via a few specific cavities, and they suggest the existence of discrete escape pathways.

Purification of a ligand for the EPH-like receptor HEK using a biosensor-based affinity detection approach.

Advances in screening technologies allowing the identification of growth factor receptors solely by virtue of DNA or protein sequence comparison call for novel methods to isolate corresponding ligand growth factors. The EPH-like receptor tyrosine kinase (RTK) HEK (human EPH-like kinase) was identified previously as a membrane antigen on the LK63 human pre-B-cell line and overexpression in leukemic specimens and cell lines suggested a role in oncogenesis. We developed a biosensor-based approach using the immobilized HEK receptor exodomain to detect and monitor purification of the HEK ligand. A protein purification protocol, which included HEK affinity chromatography, achieved a 1.8 X 10(6)-fold purification of an approximately 23-kDa protein from human placental conditioned medium. Analysis of specific sHEK (soluble extracellular domain of HEK) ligand interactions in the first and final purification steps suggested a ligand concentration of 40 pM in the source material and a Kd of 2-3 nM. Since the purified ligand was N-terminally blocked, we generated tryptic peptides and N-terminal amino acid sequence analysis of 7 tryptic fragments of the S-pyridylethylated protein unequivocally matched the sequence for AL-1, a recently reported ligand for the related EPH-like RTK REK7 (Winslow, J.W., Moran, P., Valverde, J., Shih, A., Yuan, J.Q., Wong, S.C., Tsai, S.P., Goddard, A., Henzel, W.J., Hefti, F., Beck, K.D., & Caras, I.W. (1995) Neuron 14, 973-981). Our findings demonstrate the application of biosensor technology in ligand purification and show that AL-1, as has been found for other ligands of the EPH-like RTK family, binds more than one receptor.

Novel Photochemical Methodologies For Diversity Oriented Synthesis And Screening Of Combinatorial Libraries

The main goal of this project was to develop an efficient methodology allowing rapid access to structurally diverse scaffolds decorated with various functional groups. Initially, we discovered and subsequently developed an experimentally straightforward, high-yielding photoinduced conversion of readily accessible diverse starting materials into polycyclic aldehydes and their (hemi)acetals decorated by various pendants. The two step sequence, involving the Diels-Alder addition of heterocyclic chalcones and other benzoyl ethylenes to a variety of dienes, followed by the Paternò-Büchi reaction, was described as an alkene-carbonyl oxametathesis. This methodology offers a rapid increase in molecular complexity and diversity of the target scaffolds. To develop this novel methodology further and explore its generality, we directed our attention to the Diels-Alder adducts based on various chromones. We discovered that the Diels-Alder adducts of chromones are capable of photoinduced alkene-arene [2+2] cycloaddition producing different dienes, which can either dimerize or be introduced into a double-tandem [4π+2π]·[2π+2π]·[4π+2π]·[2π+2π] synthetic sequence, followed by an acid-catalyzed oxametathesis, leading to a rapid expansion of molecular complexity over a few experimentally simple steps. In view of the fact that oxametathesis previously was primarily observed in aromatic oxetanes, we decided to prepare model aliphatic oxetanes with a conformationally unconstrained or "flexible" methyl group based on the Diels-Alder adducts of cyclohexadiene or cyclopentadiene with methyl vinyl ketone. Upon addition of an acid, the expected oxametathesis occurred with results similar to those observed in the aromatic series proving the generality of this approach. Also we synthesized polycyclic oxetanes resulting from the Diels-Alder adducts of cyclic ketones. This not only gave us access to remarkably strained oxetane systems, but also the mechanism for their protolytic ring opening provided a great deal of insight to how the strain affects the reactivity. Additionally, we discovered that although the model Hetero-Diels-Alder adducts did not undergo [2+2] cycloaddition, both exo- and endo-Sulfa-Diels-Alder products, nonetheless, were photochemically active and various products with defined stereochemistry could be produced upon photolysis. In conclusion, we have developed an approach to the encoding and screening of solution phase libraries based on the photorelease of externally sensitized photolabile tags. The encoding tags can be released into solution only when a binding event occurs between the ligand and the receptor, equipped with an electron transfer sensitizer. The released tags are analyzed in solution revealing the identity of the lead ligand or narrowing the range of potential leads.

A Comparison of Methodologies from Two Longitudinal Community-Based Randomized Controlled Trials of Similar Interventions in Palliative Care: What Worked and What Did Not

Background: Methodological challenges such as recruitment problems and participant burden make clinical trials in palliative care difficult. In 2001-2004, two community-based randomized controlled trials (RCTs) of case conferences in palliative care settings were independently conducted in Australia-the Queensland Case Conferences trial (QCC) and the Palliative Care Trial (PCT). Design: A structured comparative study of the QCC and PCT was conducted, organized by known practical and organizational barriers to clinical trials in palliative care. Results: Differences in funding dictated study designs and recruitment success; PCT had 6 times the budget of QCC. Sample size attainment. Only PCT achieved the sample size goal. QCC focused on reducing attrition through gatekeeping while PCT maximized participation through detailed recruitment strategies and planned for significant attrition. Testing sustainable interventions. QCC achieved a higher percentage of planned case conferences; the QCC strategy required minimal extra work for clinicians while PCT superimposed conferences on normal work schedules. Minimizing participant burden. Differing strategies of data collection were implemented to reduce participant burden. QCC had short survey instruments. PCT incorporated all data collection into normal clinical nursing encounters. Other. Both studies had acceptable withdrawal rates. Intention-to-treat analyses are planned. Both studies included substudies to validate new outcome measures. Conclusions: Health service interventions in palliative care can be studied using RCTs. Detailed comparative information of strategies, successes and challenges can inform the design of future trials. Key lessons include adequate funding, recruitment focus, sustainable interventions, and mechanisms to minimize participant burden.