Determinação da idade e crescimento da piramutaba Brachyplatystoma vaillantii (Valenciennes, 1840) (Siluriformes : Pimelodidae) capturada no estuário amazônico

Neste trabalho foram analisados exemplares de piramutaba (Brachyplalystoma vaillantii) provenientes de pescarias experimentais no estuário amazônico. Para o estudo de determinação da idade foram analisados acúleos das nadadeiras peitorais e dorsal, opérculos, otólitos (lapillus) e vértebras. Da análise destas estruturas rígidas foi concluído que a vértebra é a estrutura mais adequada para determinar a idade da piramutaba, pois esta estrutura apresentou 59% de anéis nítidos e uma boa correlação entre o seu raio e o comprimento furcal do peixe (r² = 0,9889 e p<0,05). Os anéis etários das vértebras foram validados pelo método da distribuição de freqüências por classes de comprimento. A piramutaba forma dois anéis etários por ano em suas vértebras. A relação entre o peso total e o comprimento furcal da piramutaba descreve seu crescimento como alométrico e a equação que descreve este crescimento é Wt = 6,1 * 10^-6 * Lf^3,1129. A proporção sexual de piramutaba verificada não foi de 1:1, onde o número de fêmeas foi superior ao de machos. Foi observado um número máximo de dez anéis nítidos nas vértebras de piramutaba. O modelo de crescimento utilizado neste trabalho foi o de von Bertalanffy para as estimativas das equações de crescimento em comprimento e em peso. Os parâmetros de crescimento (k, t₀ e L∞) foram estimados através de quatro diferentes métodos: contagem de anéis nas vértebras, retrocálculo, decomposição dos raios e distribuição de freqüências por classes de comprimento. Os parâmetros de crescimento foram: k = 0,138 ano^-1, t₀ = -0,239 e L∞ = 110,5 cm (contagem de anéis); k = 0,119 ano^-1, t₀ = -0,202 e L∞ = 110,5 cm (retrocálculo); k = 0,096 ano^-1, t₀ = -0,146 e L∞ = 110,5 cm (decomposição dos raios) e k = 0,127 ano^-1, t₀ = -0,236 e L∞ = 110,5 cm (distribuição de freqüências).

Growth parameters and mortality rate of the Scomber japonicus peruanus (Jordan & Hubb, 1925) along the Peruvian coast, South Pacific

The growth parameters and the mortality rates of the Scomber japonicus peruanus (Chub mackerel) were studied based on monthly data of frequency of fork length classes obtained from commercial landings off the Peruvian coast from 1996 to 1998. The asymptotic body length and growth rate values obtained by the ELEFAN I (Electronic Length Frequency Analysis) ranged from 40.20 cm to 42.20 cm and from 0.38 to 0.39, respectively. The oscillation amplitude was 0.60; the Winter point values varied from 0.50 to 0.60 and the performance index from 2.79 to 2.84. The total mortality rate of the Chub mackerel obtained by the linearized catch curve oscillated between 1.68 and 3.35. The rate of fishing mortality varied from 1.16 to 2.78 and the exploitation rate from 0.68 to 0.84. The annual rate of natural mortality estimated by the Pauly`s method ranged from 0.52 to 0.53. The results obtained allow us to conclude that the longevity of the Chub mackerel was slightly over seven years.

Dominant pelagic amphipods collected as swimmers from a mooring time-series at AWI HAUSGARTEN

Time series length-frequency data are presented for Themisto amphipods collected as swimmers by moored sediment traps since 2000 at the AWI deep-sea observatory HAUSGARTEN (79°N/4°E) in the eastern Fram Strait. Amphipod occurrences increased significantly from 2000 to 2009 at 200-300 m depth, and the North Atlantic species Themisto compressa was continuously present in the samples starting in 2004. We present year-round records of large adult Themisto amphipods, including the appearance of Themisto libellula with a total body length of up to 56.7 mm and juveniles starting from 4.0 mm. The length of Themisto abyssorum ranged from 4.2 to 25.6 mm, whereas it varied for Themisto compressa from 8.8 to 24.4 mm. Length-frequency analysis indicated a life span of 2 years for T. abyssorum and at least 3 years for T. libellula. The absence of juveniles for T. compressa suggested its reproduction in southern subarctic areas and its occasional northward migration with warmer Atlantic water into the eastern Fram Strait. The seasonal and long-term size structures of the three pelagic species were consistent over the course of the study, indicating no changes occurred in cohort development due to increasing abundances or warming water temperatures.

Length-weight relationships of the anchoveta, Cetengraulis mysticetus, in the Gulf of Panama

ENGLISH: Knowledge of the length-frequency distribution and the length-weight relationships of the anchoveta is essential for converting the catch statistics of that species from pounds to numbers of fish. Such conversions are necessary for various types of investigations, especially those involving estimation of the population size and mortality rates. The analysis of the results of a recent tagging program conducted with anchovetas in the Gulf of Panama (Bayliff, 1965) requires that such conversions be made. Length-frequency data for the anchoveta have already been collected and published (Howard and Landa, 1958; Bayliff, 1964). The present report deals with length-weight data from fish collected in various .areas of the Gulf of Panama in all months of the year and in several different years. Opportunity is thus afforded to compare the length-weight relationships of fish of different year classes in different areas, months, and years. SPANISH: El conocimiento de la distribución de la frecuencia de longitud y de las relaciones entre la longitud y el peso de la anchoveta es esencial en las estadísticas de captura de esta especie para la conversión de peso en libras a número de peces. Estas conversiones son necesarias para varios tipos de investigación, especialmente las que se refieren a la estimación del tamaño de la población y de las tasas de mortalidad. Estas conversiones se requieren para analizar los resultados de un programa reciente de marcación de anchovetas en el Golfo de Panamá (Bayliff, 1965). Los datos de la frecuencia de longitud de la anchoveta ya han sido recolectados y publicados (Howard y Landa, 1958; Bayliff, 1964). El presente informe trata de los datos de longitud y peso de los peces recolectados en varias áreas del Golfo de Panamá durante todos los meses del año y durante varios años. Esto ofrece la oportunidad de comparar las relaciones entre la longitud y el peso de peces pertenecientes a varias clases anuales en áreas, meses y años diferentes.

VPA estimates of fishing mortality and exploited biomass from Sardinella aurita catch-at-length data in eastern Venezuela

In this study, length-frequency data on Spanish sardine (Sardinella aurita) from northeastern Venezuela were analyzed for the period 1967-1989. Average growth parameters for the von Bertalanffy equation were established as L sub( infinity )= 26.6 cm (TL) and K = 1.26 year super(-1). The number of recruits to the fishing area, estimated from length-structured Virtual Population Analysis, varied from <10 super(8) in the late 1960s to >10 super(9) at the end of the 1980s. Exploited biomass estimates for the same period varied from less than 20,000 t in the first year to more than 100,000 in 1989. Both recruitment and exploited biomass showed different seasonal patterns between 1976-1983 and 1984-1988. Despite some uncertainty regarding these estimates, it is considered that major population tendencies are adequately represented by this analysis

Soil microbial community analysis using terminal restriction fragment length polymorphisms

Terminal restriction fragment length polymorphism (T-RFLP) analysis is a polymerase chain reaction (PCR)-fingerprinting method that is commonly used for comparative microbial community analysis. The method can be used to analyze communities of bacteria, archaea, fungi, other phylogenetic groups or subgroups, as well as functional genes. The method is rapid, highly reproducible, and often yields a higher number of operational taxonomic units than other, commonly used PCR-fingerprinting methods. Sizing of terminal restriction fragments (T-RFs) can now be done using capillary sequencing technology allowing samples contained in 96- or 384-well plates to be sized in an overnight run. Many multivariate statistical approaches have been used to interpret and compare T-RFLP fingerprints derived from different communities. Detrended correspondence analysis and the additive main effects with multiplicative interaction model are particularly useful for revealing trends in T-RFLP data. Due to biases inherent in the method, linking the size of T-RFs derived from complex communities to existing sequence databases to infer their taxonomic position is not very robust. This approach has been used successfully, however, to identify and follow the dynamics of members within very simple or model communities. The T-RFLP approach has been used successfully to analyze the composition of microbial communities in soil, water, marine, and lacustrine sediments, biofilms, feces, in and on plant tissues, and in the digestive tracts of insects and mammals. The T-RFLP method is a user-friendly molecular approach to microbial community analysis that is adding significant information to studies of microbial populations in many environments.

Frequency of the HFE C282Y and H63D polymorphisms in Brazilian malaria patients and blood donors from the Amazon region

Malaria is an endemic parasitosis and its causitive agent, Plasmodium, has a metabolism linked to iron supply. HFE is a gene with the polymorphisms C282Y and H63D, which are associated with a progressive iron accumulation in the organism leading to a disease called hereditary hemochromatosis. The aim of the present study was to determine the allelic and genotypic frequencies of the HFE gene polymorphisms in malaria patients and blood donors from the Brazilian Amazon region. We screened 400 blood donors and 400 malaria patients for the HFE C282Y and H63D polymorphisms from four states of the Brazilian Amazon region by polymerase chain reaction and restriction fragment length polymorphism analysis. We did not find any C282Y homozygous individuals, and the only five heterozygous individuals detected were from Pará State. The most frequent genotype in the North region of Brazil was the H63D heterozygote, in both study groups. Our results contribute to the concept that the Brazilian Amazon region should not be regarded as a single entity in South America. These polymorphisms did not influence the symptoms of malaria in the population studied, as neither severe signs nor high parasitemia were observed. Therefore, different hereditary hemochromatosis diagnostic and control measures must be developed and applied within its diverse locations. Investigations are currently being carried out in our laboratory in order to determine the importance of the coexistence of hereditary hemochromatosis in patients affected by parasitic diseases, such as malaria. ©FUNPEC-RP.

Pseudoautotomy in Dendrophidion dendrophis and Mastigodryas bifossatus (Serpentes: Colubridae): Tail Morphology and breakage frequency

The micro and macro structures of the caudal vertebrae and muscles of Dendrophidion dendrophis and Mastigodryas bifossatus were described using histological slides, dissections, radiographs, and clearing and double staining of intact, broken, and healed tails. To analyze the relationship among the frequencies of healed tails we established two populations of D. dendrophis and six groups of M. bifossatus. We found that fractures of the tail in the two species are intervertebral, and there are no morphological and/or structural mechanisms that facilitate the urotomy, which is classified as non-specialized pseudoautotomy. The caudal vertebrae of D. dendrophis and M. bifossatus show minor differences in the shape of the condyle, cotyle, and border of the neural spine, and in the size and orientation of the hemapophysis and pleurapophysis. The absence of bleeding at the moment of tail breakage may indicate the presence of sphincters in the veins and arteries of D. dendrophis. The distal part of the last vertebrae retained in healed tails of D. dendrophis and M. bifossatus participates in the healing processes as a possible source of calcium in the formation of a calcified cap. We found high frequency of tail breakage in both species, which occurs in almost the entire length of the tail, with no specific areas of concentration. There was no difference in the frequencies of healed tails among males and females of different populations of D. dendrophis and M. bifossatus. Juveniles have lower breakage frequencies than adults in both species, except for populations of M. bifossatus from the Cerrado and Pampa. © 2013 by the American Society of Ichthyologists and Herpetologists.

In vitro analysis of the influence of surface treatment of dental implants on primary stability

Surface treatment interferes with the primary stability of dental implants because it promotes a chemical and micromorphological change on the surface and thus stimulates osseointegration. This study aimed to evaluate the effects of different surface treatments on primary stability by analyzing insertion torque (IT) and pullout force (PF). Eight samples of implants with different surface treatments (TS - external hexagon with acid surface treatment; and MS - external hexagon, machined surface), all 3.75 mm in diameter x 11.5 mm in length, were inserted into segments of artificial bones. The IT of each sample was measured by an electronic torquemeter, and then the pullout test was done with a universal testing machine. The results were subjected to ANOVA (p < 0.05), followed by Tukey's test (p < 0.05). The IT results showed no statistically significant difference, since the sizes of the implants used were very similar, and the bone used was not highly resistant. The PF values (N) were, respectively, TS = 403.75 +/- 189.80 and MS = 276.38 +/- 110.05. The implants were shown to be different in terms of the variables of maximum force (F = 4.401, p = 0.0120), elasticity in maximum flexion (F = 3.672, p = 0.024), and relative stiffness (F = 4.60, p = 0.01). In this study, external hexagonal implants with acid surface treatment showed the highest values of pullout strength and better stability, which provide greater indication for their use.

Compilation of North Atlantic albacore tuna (Thunnus alalunga) fork length frequencies in 2 centimeter intervals from catches in the North Atlantic for the period 1956-2010

The development of the ecosystem approach and models for the management of ocean marine resources requires easy access to standard validated datasets of historical catch data for the main exploited species. They are used to measure the impact of biomass removal by fisheries and to evaluate the models skills, while the use of standard dataset facilitates models inter-comparison. North Atlantic albacore tuna is exploited all year round by longline and in summer and autumn by surface fisheries and fishery statistics compiled by the International Commission for the Conservation of Atlantic Tunas (ICCAT). Catch and effort with geographical coordinates at monthly spatial resolution of 1° or 5° squares were extracted for this species with a careful definition of fisheries and data screening. In total, thirteen fisheries were defined for the period 1956-2010, with fishing gears longline, troll, mid-water trawl and bait fishing. However, the spatialized catch effort data available in ICCAT database represent a fraction of the entire total catch. Length frequencies of catch were also extracted according to the definition of fisheries above for the period 1956-2010 with a quarterly temporal resolution and spatial resolutions varying from 1°x 1° to 10°x 20°. The resolution used to measure the fish also varies with size-bins of 1, 2 or 5 cm (Fork Length). The screening of data allowed detecting inconsistencies with a relatively large number of samples larger than 150 cm while all studies on the growth of albacore suggest that fish rarely grow up over 130 cm. Therefore, a threshold value of 130 cm has been arbitrarily fixed and all length frequency data above this value removed from the original data set.

Compilation of North Atlantic albacore tuna (Thunnus alalunga) fork length frequencies in 5 centimeter intervals from catches in the North Atlantic for the period 1956-2010

The development of the ecosystem approach and models for the management of ocean marine resources requires easy access to standard validated datasets of historical catch data for the main exploited species. They are used to measure the impact of biomass removal by fisheries and to evaluate the models skills, while the use of standard dataset facilitates models inter-comparison. North Atlantic albacore tuna is exploited all year round by longline and in summer and autumn by surface fisheries and fishery statistics compiled by the International Commission for the Conservation of Atlantic Tunas (ICCAT). Catch and effort with geographical coordinates at monthly spatial resolution of 1° or 5° squares were extracted for this species with a careful definition of fisheries and data screening. In total, thirteen fisheries were defined for the period 1956-2010, with fishing gears longline, troll, mid-water trawl and bait fishing. However, the spatialized catch effort data available in ICCAT database represent a fraction of the entire total catch. Length frequencies of catch were also extracted according to the definition of fisheries above for the period 1956-2010 with a quarterly temporal resolution and spatial resolutions varying from 1°x 1° to 10°x 20°. The resolution used to measure the fish also varies with size-bins of 1, 2 or 5 cm (Fork Length). The screening of data allowed detecting inconsistencies with a relatively large number of samples larger than 150 cm while all studies on the growth of albacore suggest that fish rarely grow up over 130 cm. Therefore, a threshold value of 130 cm has been arbitrarily fixed and all length frequency data above this value removed from the original data set.

Compilation of North Atlantic albacore tuna (Thunnus alalunga) fork length frequencies in 1 centimeter intervals from catches in the North Atlantic for the period 1956-2010

The development of the ecosystem approach and models for the management of ocean marine resources requires easy access to standard validated datasets of historical catch data for the main exploited species. They are used to measure the impact of biomass removal by fisheries and to evaluate the models skills, while the use of standard dataset facilitates models inter-comparison. North Atlantic albacore tuna is exploited all year round by longline and in summer and autumn by surface fisheries and fishery statistics compiled by the International Commission for the Conservation of Atlantic Tunas (ICCAT). Catch and effort with geographical coordinates at monthly spatial resolution of 1° or 5° squares were extracted for this species with a careful definition of fisheries and data screening. In total, thirteen fisheries were defined for the period 1956-2010, with fishing gears longline, troll, mid-water trawl and bait fishing. However, the spatialized catch effort data available in ICCAT database represent a fraction of the entire total catch. Length frequencies of catch were also extracted according to the definition of fisheries above for the period 1956-2010 with a quarterly temporal resolution and spatial resolutions varying from 1°x 1° to 10°x 20°. The resolution used to measure the fish also varies with size-bins of 1, 2 or 5 cm (Fork Length). The screening of data allowed detecting inconsistencies with a relatively large number of samples larger than 150 cm while all studies on the growth of albacore suggest that fish rarely grow up over 130 cm. Therefore, a threshold value of 130 cm has been arbitrarily fixed and all length frequency data above this value removed from the original data set.

Adaptive instantaneous frequency estimation: Techniques and algorithms

This thesis deals with the problem of the instantaneous frequency (IF) estimation of sinusoidal signals. This topic plays significant role in signal processing and communications. Depending on the type of the signal, two major approaches are considered. For IF estimation of single-tone or digitally-modulated sinusoidal signals (like frequency shift keying signals) the approach of digital phase-locked loops (DPLLs) is considered, and this is Part-I of this thesis. For FM signals the approach of time-frequency analysis is considered, and this is Part-II of the thesis. In part-I we have utilized sinusoidal DPLLs with non-uniform sampling scheme as this type is widely used in communication systems. The digital tanlock loop (DTL) has introduced significant advantages over other existing DPLLs. In the last 10 years many efforts have been made to improve DTL performance. However, this loop and all of its modifications utilizes Hilbert transformer (HT) to produce a signal-independent 90-degree phase-shifted version of the input signal. Hilbert transformer can be realized approximately using a finite impulse response (FIR) digital filter. This realization introduces further complexity in the loop in addition to approximations and frequency limitations on the input signal. We have tried to avoid practical difficulties associated with the conventional tanlock scheme while keeping its advantages. A time-delay is utilized in the tanlock scheme of DTL to produce a signal-dependent phase shift. This gave rise to the time-delay digital tanlock loop (TDTL). Fixed point theorems are used to analyze the behavior of the new loop. As such TDTL combines the two major approaches in DPLLs: the non-linear approach of sinusoidal DPLL based on fixed point analysis, and the linear tanlock approach based on the arctan phase detection. TDTL preserves the main advantages of the DTL despite its reduced structure. An application of TDTL in FSK demodulation is also considered. This idea of replacing HT by a time-delay may be of interest in other signal processing systems. Hence we have analyzed and compared the behaviors of the HT and the time-delay in the presence of additive Gaussian noise. Based on the above analysis, the behavior of the first and second-order TDTLs has been analyzed in additive Gaussian noise. Since DPLLs need time for locking, they are normally not efficient in tracking the continuously changing frequencies of non-stationary signals, i.e. signals with time-varying spectra. Nonstationary signals are of importance in synthetic and real life applications. An example is the frequency-modulated (FM) signals widely used in communication systems. Part-II of this thesis is dedicated for the IF estimation of non-stationary signals. For such signals the classical spectral techniques break down, due to the time-varying nature of their spectra, and more advanced techniques should be utilized. For the purpose of instantaneous frequency estimation of non-stationary signals there are two major approaches: parametric and non-parametric. We chose the non-parametric approach which is based on time-frequency analysis. This approach is computationally less expensive and more effective in dealing with multicomponent signals, which are the main aim of this part of the thesis. A time-frequency distribution (TFD) of a signal is a two-dimensional transformation of the signal to the time-frequency domain. Multicomponent signals can be identified by multiple energy peaks in the time-frequency domain. Many real life and synthetic signals are of multicomponent nature and there is little in the literature concerning IF estimation of such signals. This is why we have concentrated on multicomponent signals in Part-H. An adaptive algorithm for IF estimation using the quadratic time-frequency distributions has been analyzed. A class of time-frequency distributions that are more suitable for this purpose has been proposed. The kernels of this class are time-only or one-dimensional, rather than the time-lag (two-dimensional) kernels. Hence this class has been named as the T -class. If the parameters of these TFDs are properly chosen, they are more efficient than the existing fixed-kernel TFDs in terms of resolution (energy concentration around the IF) and artifacts reduction. The T-distributions has been used in the IF adaptive algorithm and proved to be efficient in tracking rapidly changing frequencies. They also enables direct amplitude estimation for the components of a multicomponent

Analysis of acoustic emission data for structural health monitoring applications

Acoustic emission (AE) is the phenomenon where high frequency stress waves are generated by rapid release of energy within a material by sources such as crack initiation or growth. AE technique involves recording these stress waves by means of sensors placed on the surface and subsequent analysis of the recorded signals to gather information such as the nature and location of the source. It is one of the several diagnostic techniques currently used for structural health monitoring (SHM) of civil infrastructure such as bridges. Some of its advantages include ability to provide continuous in-situ monitoring and high sensitivity to crack activity. But several challenges still exist. Due to high sampling rate required for data capture, large amount of data is generated during AE testing. This is further complicated by the presence of a number of spurious sources that can produce AE signals which can then mask desired signals. Hence, an effective data analysis strategy is needed to achieve source discrimination. This also becomes important for long term monitoring applications in order to avoid massive date overload. Analysis of frequency contents of recorded AE signals together with the use of pattern recognition algorithms are some of the advanced and promising data analysis approaches for source discrimination. This paper explores the use of various signal processing tools for analysis of experimental data, with an overall aim of finding an improved method for source identification and discrimination, with particular focus on monitoring of steel bridges.