965 resultados para Inibidores da agregação de plaquetas
Resumo:
The clay swelling is today one of the major problems during the well drilling. Nearly 50% of clays that constitute shale expand easily in the presence of water molecules. During the drilling of a geological formation containing swelling clays, when is feasible the use of water base fluids, it is necessary to apply clay inhibitors. This avoids the incorporation of the cutting to the drilling fluid which is responsible for the wall swelling and crumbling. The aim of this work was to evaluate the synergistic behavior that occurs when swelling clay inhibitors are associated to NaCl and KCl salts. Three swelling clay inhibitors samples, INIB A, INIB B and INIB C, were analyzed. Each inhibitor was characterized by the amount of chlorides and active matter content. For the water-clay interaction evaluation in the presence of various fluids, it was used the Capillary Suction Timer (CST, Fann) and Linear Swell Meter (LSM 2000, Fann). For better interpretation of results, a Design of Experiments (DOE, Umetrics MODDE 7.0 TM) through Result Surface Methodology (RSM) was employed, taking into account the type, the swelling inhibitors concentration and the contact time with the clay. The results showed different efficiencies among the inhibitors employed, and the salt-inhibitors mixtures were more efficient than those products alone. However, for field operation, other parameters should be taking into account, as operational cost, environmental requests and time of application for each product
Resumo:
Corrosion is an important phenomenon that frequently occurs in the oil industry, causing surface ablation, such as it happens on the internal surfaces of oil pipes. This work aims to obtain new systems to reduce this specific problem. The surfactants SDS, CTAB, and UNITOL L90 (in micellar and microemulsionated systems) were used as corrosion inhibitors. The systems were obtained using a C/S ratio of 2, butanol as cosorfactant, kerosene as oil phase and, as water phase, NaCl solutions of 0.5M with pH = 2, 4, and 7. Microemulsion regions were found both for direct and inverse micelles. SDS had the higher microemulsion region and the area was not dependent of pH. The study of micellization of these surfactans in the liquid-gas interface was carried out via the determination of CMC from surface tension measurements. Regarding microemulsionated systems, in the case of CTAB, CMC increased when pH was increased, being constant for SDS and UNITOL L90. Concerning micellar systems, increase in pH caused decrease and increase in CMC for SDC and CTAB, respectively. In the case of UNITOL L90, CMC was practically constant, but increased for pH = 4. The microemulsionated systems presented higher CMC values, except for UNITOL L90 L90. The negative values of free energy of micellization indicated that the process of adsorption was spontaneous. The results also indicated that, comparing microemulsionated to systems, adsorption was less spontaneous in the case of SDS and CTAB, while it did not change for UNITOL L90. SAXS experiments indicated that micelle geometry was spherical, existing also as halter and flat micelles, resuting in a better inght on the adsorption at the liquid-solid interface. Efficiency of corrosion inhibition as determined by electrochemical measurements, from corrosion currents calculated from Tafel extrapolation indicuting heat showed surfactants to be efficient even at low concentrations. Equilibrium isotherm data were fitted to the Freundlich model, indicating that surfactant adsorption occurs in the form of multilayers
Resumo:
Corrosion is a natural process that causes progressive deterioration of materials, so, reducing the corrosive effects is a major objective of development of scientific studies. In this work, the efficiency of corrosion inhibition on a AISI 1018 carbon steel of the nanoemulsion system containing the oil of the seeds of Azadirachta indica A. Juss (SNEOAI) was evaluated by the techniques of linear polarization resistance (LPR) and weight loss (CPM), a instrumented cell. For that, hydroalcoholic extract of leaves of A. indica (EAI) was solubilized in a nanoemulsion system (SNEOAI) of which O/W system (rich in aqueous phase). This nanoemulsion system (tested in different concentrations) was obtained with oil from the seeds of this plant species (OAI) (oil phase), dodecylammonium chloride (DDAC) (surfactant), butanol (cosurfactant) and water, using 30 % of C/T (cosurfactant/surfactant), 0.5 % of oil phase and 69.5 % of aqueous phase, and characterized by surface tension, rheology and droplet sizes. This systems SNEOAI and SNEOAI-EAI (nanoemulsion containing hydroalcoholic extract - EAI) showed inhibition efficiencies in corrosive environment in saline (1 %), for the method of LPR with significant value of 70.58 % (300 ppm) to SNEOAI, 74.17 % (100 ppm) and 72.51 % (150 ppm) to SNEOAI-EAI. The best efficiencies inhibitions were observed for the method of CPM with 85.41 % for the SNEOAI (300 ppm) and 83.19 % SNEOAI-EAI (500 ppm). The results show that this formulation could be used commercially for use as a corrosion inhibitor, this research contributed to the biotechnological applicability of Azadirachta indica, considering the large use of this plant species rich in limonoids (tetranortriterpenoids), especially azadirachtin
Resumo:
Corrosion usually occurs in pipelines, so that it is necessary to develop new surface treatments to control it. Surfactants have played an outstanding role in this field due to its capacity of adsorbing on metal surfaces, resulting in interfaces with structures that protect the metal at low surfactant concentrations. The appearance of new surfactants is a contribution to the area, as they increase the possibility of corrosion control at specific conditions that a particular oil field presents. The aim of this work is to synthesize the surfactants sodium 12 hydroxyocadecenoate (SAR), sodium 9,10-epoxy-12 hydroxyocadecanoate (SEAR), and sodium 9,10:12,13-diepoxy-octadecanoate (SEAL) and apply them as corrosion inhibitors, studying their action in environments with different salinities and at different temperatures. The conditions used in this work were chosen in order to reproduce oil field reality. The study of the micellization of these surfactants in the liquid-gas interface was carried out using surface tensiometry. It was observed that cmc increased as salt concentration was increased, and temperature and pH were decreased, while cmc decreased with the addition of two epoxy groups in the molecule. Using the values of cmc and the Gibbs equation, the values of Gibbs free energy of adsorption, area per adsorbed molecule, and surface excess were calculated. The surface excess increases as salt concentration and temperature decreases, increasing as pH is increased. The area per adsorbed molecule and the free energy of adsorption decrease with salt concentration, temperature, and pH increase. SAXS results showed that the addition of epoxy group in surfactant structure results in a decrease in the repulsion between the micelles, favoring the formation of more oblong micellar structures, ensuring a better efficiency of metal coverage. The increase in salt and surfactant concentrations provides an increase in micellar diameter. It was shown that the increase in temperature does not influence micellar structure, indicating thermal stability that is advantageous for use as corrosion inhibitor. The results of inhibition efficiency for the surfactants SEAR and SEAL were considered the best ones. Above cmc, adsorption occurred by the migration of micelles from the bulk of the solution to the metal surface, while at concentrations below cmc film formation must be due to the adsorption of semi-micellar and monomeric structures, certainly due to the presence of the epoxy group, which allows side interactions of the molecule with the metal surface. The metal resistance to corrosion presented values of 90% of efficiency. The application of Langmuir and Frumkin isotherms showed that the later gives a better description of adsorption because the model takes into account side interactions from the adsorbing molecules. Wettability results showed that micelle formation on the solid surface occurs at concentrations in the magnitude of 10-3 M, which isthe value found in the cmc study. This value also justifies the maximum efficiencies obtained for the measurements of corrosion resistance at this concentration. The values of contact angle as a function of time suggest that adsorption increases with time, due to the formation of micellar structures on metal surface
Resumo:
Difusive processes are extremely common in Nature. Many complex systems, such as microbial colonies, colloidal aggregates, difusion of fluids, and migration of populations, involve a large number of similar units that form fractal structures. A new model of difusive agregation was proposed recently by Filoche and Sapoval [68]. Based on their work, we develop a model called Difusion with Aggregation and Spontaneous Reorganization . This model consists of a set of particles with excluded volume interactions, which perform random walks on a square lattice. Initially, the lattice is occupied with a density p = N/L2 of particles occupying distinct, randomly chosen positions. One of the particles is selected at random as the active particle. This particle executes a random walk until it visits a site occupied by another particle, j. When this happens, the active particle is rejected back to its previous position (neighboring particle j), and a new active particle is selected at random from the set of N particles. Following an initial transient, the system attains a stationary regime. In this work we study the stationary regime, focusing on scaling properties of the particle distribution, as characterized by the pair correlation function ø(r). The latter is calculated by averaging over a long sequence of configurations generated in the stationary regime, using systems of size 50, 75, 100, 150, . . . , 700. The pair correlation function exhibits distinct behaviors in three diferent density ranges, which we term subcritical, critical, and supercritical. We show that in the subcritical regime, the particle distribution is characterized by a fractal dimension. We also analyze the decay of temporal correlations
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
INTRODUÇÃO: O reparo tissular é o objetivo final da cirurgia. A cultura celular requer arcabouço mecânico que dê suporte ao crescimento celular e difusão dos nutrientes. O uso do plasma rico em plaquetas (PRP) como um arcabouço 3D possui diversas vantagens: é material biológico, de fácil absorção pós-transplante, rico em fatores de crescimento, em especial PDGF- ββ e TGF-β que estimula síntese de matriz extracelular na cartilagem. OBJETIVO: Desenvolver arcabouço 3D à base de PRP. MATERIAIS E MÉTODOS: Duas formas foram idealizadas: Sphere e Carpet. Condições estéreis foram utilizadas. O gel de plaquetas permaneceu em cultura celular, observado diariamente em microscópio invertido. RESULTADOS: Ambos arcabouços obtiveram sucesso, com aspectos positivos e negativos. DISCUSSÃO: A forma Sphere não aderiu ao plástico. Observou-se retração do gel e investigação ao microscópio dificultada devido às áreas opacas no campo visual. A forma Carpet não aderiu ao plástico e apresentou-se translúcida. O tempo de estudo foi de 20 dias. CONCLUSÕES: A produção de um arcabouço 3D PRP foi um sucesso, e trata-se de uma alternativa que necessita ser mais utilizado e investigado para que se consolide em uma rota eficiente e confiável na tecnologia de engenharia tissular, particularmente em cultura de tecido cartilaginoso.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O uso intensivo dos solos com o cultivo da cana-de-açúcar modifica significativamente as propriedades físicas do solo. Assim, objetivou-se avaliar o efeito do manejo da cana-de-açúcar com colheita mecanizada sobre a agregação de um Latossolo Vermelho distrófico típico de textura argilosa, situado em Guariba (SP). Foram selecionadas quatro situações (ciclos) com manejo de cana-de-açúcar colhida mecanicamente sem prévia queima: cana-planta e cana-soca de primeiro, segundo e terceiro cortes. Nas camadas de 0-0,10; 0,10-0,20 e 0,20-0,30 m de profundidade foram avaliados: diâmetro médio ponderado dos agregados (DMP), teores e estoques de carbono orgânico do solo. O manejo da cana-de-açúcar com colheita mecanizada influencia o DMP do solo, cujos valores são maiores no manejo envolvendo cana-planta e reduzem com o passar dos anos. Com o aumento da profundidade do solo, os estoques de carbono são mais relacionados à densidade do solo do que aos teores de carbono.
Resumo:
Visando à obtenção de dados relativos aos efeitos de sistemas de preparo periódico do solo e sua relação com a degradação do solo e a capacidade de incorporação de resíduos, avaliaram-se a distribuição percentual de agregados do solo, o diâmetro médio geométrico, o módulo de finura e a incorporação de resíduos, durante o ano agrícola de 2001-2002. A área em estudo foi classificada como Latossolo Vermelho distrófico, localizada no município de Uberaba - MG. Utilizou-se do delineamento estatístico em blocos casualizados com quatro repetições, tendo como tratamentos o preparo periódico primário do solo com o escarificador, enxada rotativa, arado de aivecas, grade aradora e arado de discos. As análises dos resultados mostraram a enxada rotativa e a grade aradora como os equipamentos mais agressivos à estrutura do solo. O escarificador e a enxada rotativa apresentaram menor capacidade de incorporação dos resíduos vegetais. O escarificador manteve maior cobertura vegetal e maior grau de agregação do solo.
Resumo:
Em geral, todos os efeitos dos antiinflamatórios estão relacionados com a inibição da ciclo-oxigenase (COX) do ácido araquidônico e, portanto, inibição da produção de prostaglandinas e tromboxanos. Existem dois tipos de COX, quais sejam COX-1 e COX-2. A COX-1 é uma enzima constitucional expressa em muitos tecidos, incluindo plaquetas sangüíneas, e está envolvida na homeostase tecidual. Por outro lado, a COX-2 é induzida em células inflamatórias quando elas são ativadas, sendo considerada a enzima que produz os mediadores da inflamação da classe dos prostanóides. A ação dos antiinflamatórios está relacionada à inibição da COX-2 e é provável que seus efeitos indesejados se devam principalmente à inibição da COX-1. Tratamentos maternos com antiinflamatórios não esteroidais (AINEs) têm sido associados, com freqüência, à vasoconstrição do ducto arterioso fetal, hipertensão arterial pulmonar e inibição da agregação plaquetária. Alterações na hemostasia são alguns dos efeitos colaterais produzidos pelo uso incontrolado dos AINEs, os quais induzem a um desequilíbrio na liberação de prostaglandinas e tromboxanos, que se reflete na adesividade e agregação plaquetária. As alterações hemostáticas observadas em neonatos, decorrentes do uso de salicilatos pela mãe, ocorrem devido à inibição da agregação plaquetária e à diminuição da atividade do fator XII relacionado à coagulação sangüínea. Estudos em camundongos revelaram que o uso de corticóides durante a gestação pode levar a anormalidades no desenvolvimento fetal, por alterações na diferenciação celular.
Resumo:
A mangicultura no semiárido brasileiro destaca-se pelos altos rendimentos, pela qualidade do fruto produzido e pela possibilidade de produção durante todo o ano, devido a condições climáticas e tecnologias para o manejo do crescimento vegetativo e da floração, com uso da irrigação, podas e retardantes vegetais. O paclobutrazol aplicado ao solo é utilizado no manejo da produção da mangueira na maioria dos pomares. Entretanto, há a necessidade de identificar retardantes vegetais que possam ser aplicados via foliar, de forma a minimizar os resíduos no solo e evitar o uso de quantidades inadequadas ao longo dos anos. Assim, este trabalho teve como objetivo avaliar retardantes vegetais aplicados via foliar na inibição do crescimento vegetativo de mudas de mangueira 'Tommy Atkins'. Prohexadione-Ca, etil-trinexapac e cloreto de chlormequat, aplicados via foliar, na dose de 1g i.a. planta-1, regulam o crescimento de ramos vegetativos, mas apresentam tempo diferenciado de atividade nas mudas, sendo 20 dias para prohexadione-Ca, 30 dias para cloreto de chlormequat e 45 dias para etil-trinexapac, nas condições em que o experimento foi conduzido.
Resumo:
This experiment aimed to evaluate the selectivity and efficacy of ACCase-inhibiting herbicides in castor bean crop, at Paraguacu Paulista, São Paulo, during the 2002/03 agricultural season. The experimental design used was randomized complete blocks, with eleven treatments and four replicates, constituted by the following herbicides and adjuvants: fluazifop-p-butyl 313 g ha(-1)) + Agral (TM) 0.2% v/v); sethoxydim 322 g ha(-1)) + Assist (TM) 0.5% v/v); haloxyfop-methyl 120 g ha(-1)) + Assist (TM) 0.5% v/v); clethodim+ fenoxaprop-p-ethyl 75 g ha(-1)) + Assist (TM) 0.5% v/v); quizalofop-pethyl 125 g ha(-1)) + Assist (TM) 0.5% v/v); clethodim 156 g ha(-1)) + Assist (TM) 0.5% v/v); propaquizafop 175 g ha(-1)) + Assist (TM) 0.5% v/v); tepraloxydim 400 g ha(-1)) + Dash (TM) 0.5% v/v); butroxydim 100 g ha(-1)) + Dash (TM) 0.5% v/v); isoxaflutole 60 g ha(-1)) and weed-free check. At the moment of application, castor bean plants presented 4 to 6 leaves and Cenchrus echinatus, 1 to 5 tillers. AL Guarany 2002 cultivar presented high selectivity to ACCase-inhibiting herbicides, without visible symptoms of phytotoxicity in 14 DAA days after application), except for tepraloxydim, whose symptoms persisted until 21 DAA, and isoxaflutole HPPD inhibiting), which showed injuries in older leaves and significant yield reduction. C. echinatus infestation was efficiently controlled by ACCase-inhibiting herbicides between 14 and 21 DAA (>= 95.0%).
Resumo:
Some aspects of the widely observed over-dispersed pattern of the distribution of parasites within the host population are examined. It has been established in the parasitological literature that most hosts usually harbour few parasites, while only few hosts harbour a large proportion of the parasite population. Factors that may influence the pattern of distribution of parasites, the relation between the level of parasite aggregation and the prevalence of infection, and changes in this level of aggregation as a function of host age are analysed. Factors which determine the diversity of species in parasite communities are presented, and aspects of exploitative and interference competition among parasites and their relations with biological control procedures are also considered. Attention is also focused on the regulatory and destabilizing processes influencing the dynamic behaviour of host-parasite population interactions.