Study of the variation of the input impedance of induction machines with frequency

The results of a study of the variation of three-phase induction machines' input impedance with frequency are proposed. A range of motors were analysed, both two-pole and four-pole, and the magnitude and phase of the input impedance were obtained over a wide frequency range of 20 Hz-1 MHz. For test results that would be useful in the prediction of the performance of induction machines during typical use, a test procedure was developed to represent closely typical three-phase stator coil connections when the induction machine is driven by a three-phase inverter. In addition, tests were performed with the motor's cases both grounded and not grounded. The results of the study show that all induction machines of the type considered exhibit a multiresonant impedance profile, where the input impedance reaches at least one maximum as the input frequency is increased. Furthermore, the test results show that the grounding of the motor's case has a significant effect on the impedance profile. Methods to exploit the input impedance profile of an induction machine to optimise machine and inverter systems are also discussed.

Uma avaliação ex-ante do impacto sobre a capacidade tecnológica da localidade acolhedora das empresas que aderiram ao regime automotivo brasileiro e os seus desdobramentos estaduais : o caso da instalação da General Motors do Brasil em Gravataí, Rio Grande do Sul

Esta tese discute três temas: políticas públicas, gestão tecnológica, e setor automotivo. Tendo por objetivo abreviar o ciclo de absorção e desenvolvimento de tecnologia, um volume expressivo de recursos tem sido transferido do setor público para o setor privado através do que é denominado de Política Pública Indutora (PPI). Os governos pretendem, assim, atrair aquelas empresas tecnologicamente mais capacitadas, na expectativa de que transfiram para a localidade onde se instalam o conhecimento que detêm. No Brasil, um dos setores-alvo deste tipo de política tem sido o automotivo, circunstância observada em diferentes momentos da história. Efetivamente, o Regime Automotivo Brasileiro pretende não apenas acelerar o desenvolvimento do país, mas também promover uma significativa transferência de tecnologia. A análise das PPI, por ser de extrema importância, é bastante influenciada e dificultada quer por seus defensores, quer por seus destratores, que as veêm sob os aspectos de sucesso ou não; mas, não bastasse essa dificuldade, há também o elevado conteúdo ideológico que sustenta as argumentações, que faz com que a avaliação se perca num quadro inconclusivo. Afinal, estas iniciativas são benéficas ou não para o país e para as economias regionais? Finalmente, a eficácia, e portanto o acerto desta estratégia só pode ser avaliado expost facto, quando já comprometidos, quiçá irremediavelmente, os recursos públicos. Por essa razão, este estudo desenvolve uma análise ex-ante das políticas públicas do tipo indutoras, fazendo uso de um modelo compreensivo que permite uma análise longitudinal, captando assim, as mudanças no ambiente. Entre outras, procurou-se responder à seguinte questão: é possível, hoje, inferir quanto à contrib uição, se positiva ou negativa, que o Regime Automotivo Brasileiro e os seus desdobramentos estaduais trarão à capacidade tecnológica no entorno da empresa atraída? O problema e a questão de pesquisa foram abordados, predominantemente, sob um enfoque qualitativo, e o método escolhido foi o estudo de caso. Com o auxílio do modelo proposto foi analisada e avaliada a potencialidade de aumento na capacidade tecnológica induzida pela instalação da unidade montadora da General Motors do Brasil, em Gravataí, Rio Grande do Sul. Ao final conclui- se que os benefícios previstos pelo Regime Automotivo Brasileiro, no que diz respeito a capacitação tecnológica local, dificilmente serão atingidos pela instalação de novas empresas automotivas ou a modernização das existentes.

Influence of design parameters on linear induction motor end effect

In this paper, a factor referred to as k(f) for linear induction motor end effect analysis is presented. The mathematical model takes into account the longitudinal entry end effect. The entry end effect produces considerable distortion in magnetic field distribution. It is shown how this influence is derived from the machine-developed force that is calculated through the application of the I-D theory. The k(f) factor establishes the relationship between the longitudinal end effect and machine parameters, mainly the number of magnetic poles, secondary resistivity, and frequency.

Rewinding and connecting alternating-current motors; fundamental principles involved in applying and checking lap and wave windings in alternating-current-motor stators and rotors together with practical winding procedure and extensive reference data in typical examples completely worked out, in winding diagrams and in 71 special tabulations, for everyday use by maintenance men in industrial plants, by winders in electrical service and repair shops and by students pursuing electrical courses,

Mode of access: Internet.

Design and analysis of a 2-DoF split-stator induction motor

A two degrees of freedom (2-DOF) actuator capable of producing linear translation, rotary motion, or helical motion would be a desirable asset to the fields of machine tools, robotics, and various apparatuses. In this paper, a novel 2-DOF split-stator induction motor was proposed and electromagnetic structure pa- rameters of the motor were designed and optimized. The feature of the direct-drive 2-DOF induction motor lies in its solid mover ar- rangement. In order to study the complex distribution of the eddy current field on the ferromagnetic cylinder mover and the motor’s operating characteristics, the mathematical model of the proposed motor was established, and characteristics of the motor were ana- lyzed by adopting the permeation depth method (PDM) and finite element method (FEM). The analytical and numerical results from motor simulation clearly show a correlation between the PDM and FEM models. This may be considered as a fair justification for the proposed machine and design tools.

Teacher induction in Australia : a sample of what’s really happening

Retention rates and stress levels of beginning teachers are of concern. Well-planned induction programs can assist beginning teachers to make the transition successfully into the profession, which may increase retention rates. This qualitative, year-long study aims to explore and describe the induction experiences of eight beginning teachers as they negotiated their first year of teaching. Data gathered through interviews and emails indicated that these teachers required further development on: catering for individual differences, assessing in terms of outcomes, relating to parents, relating to the wider community, and understanding school policies; however, relating to students and understanding legal responsibilities and duty of care were not issues. At the conclusion of their first year only one beginning teacher was assisted by a mentor (veteran teacher) on whole-school programming, and planning for improving teaching with opportunities to visit other classrooms. This was also the only beginning teacher who received a reduced workload in order to meet with the mentor to discuss pedagogical developments. The inadequate support provided to beginning teachers in this study highlights the need for principals and school staff to reassess induction processes, which includes providing time, funding, mentoring support and clear guidelines for a quality induction program.

Investigation of shaft voltage in wind turbine systems with induction generators

This paper presents the analysis of shaft voltage in different configurations of a doubly fed induction generator (DFIG) and an induction generator (IG) with a back-to-back inverter in wind turbine applications. Detailed high frequency model of the proposed systems have been developed based on existing capacitive couplings in IG & DFIG structures and common mode voltage sources. In this research work, several arrangements of DFIG based wind energy conversion systems (WES) are investigated in case of shaft voltage calculation and its mitigation techniques. Placements of an LC line filter in different locations and its effects on shaft voltage elimination are studied via Mathematical analysis and simulations. A pulse width modulation (PWM) technique and a back-to-back inverter with a bidirectional buck converter have been presented to eliminate the shaft voltage in a DFIG wind turbine.

Calculations of capacitive couplings in induction generators to analyse shaft voltage

This paper deals with the analysis of the parameters which are effective in shaft voltage generation of induction generators. It focuses on different parasitic capacitive couplings by mathematical equations, finite element simulations and experiments. The effects of different design parameters have been studied on proposed capacitances and resultant shaft voltage. Some parameters can change proposed capacitive coupling such as: stator slot tooth, the gap between slot tooth and winding, and the height of the slot tooth, as well as the air gap between the rotor and the stator. This analysis can be used in a primary stage of a generator design to reduce motor shaft voltage and avoid additional costs of resultant bearing current mitigation.

A versatile and reliable two-component system for tissue-specific gene induction in Arabidopsis

Developmental progression and differentiation of distinct cell types depend on the regulation of gene expression in space and time. Tools that allow spatial and temporal control of gene expression are crucial for the accurate elucidation of gene function. Most systems to manipulate gene expression allow control of only one factor, space or time, and currently available systems that control both temporal and spatial expression of genes have their limitations. We have developed a versatile two-component system that overcomes these limitations, providing reliable, conditional gene activation in restricted tissues or cell types. This system allows conditional tissue-specific ectopic gene expression and provides a tool for conditional cell type- or tissue-specific complementation of mutants. The chimeric transcription factor XVE, in conjunction with Gateway recombination cloning technology, was used to generate a tractable system that can efficiently and faithfully activate target genes in a variety of cell types. Six promoters/enhancers, each with different tissue specificities (including vascular tissue, trichomes, root, and reproductive cell types), were used in activation constructs to generate different expression patterns of XVE. Conditional transactivation of reporter genes was achieved in a predictable, tissue-specific pattern of expression, following the insertion of the activator or the responder T-DNA in a wide variety of positions in the genome. Expression patterns were faithfully replicated in independent transgenic plant lines. Results demonstrate that we can also induce mutant phenotypes using conditional ectopic gene expression. One of these mutant phenotypes could not have been identified using noninducible ectopic gene expression approaches.

Identification and control of induction machines using artificial neural networks

This paper proposes the use of artificial neural networks (ANNs) to identify and control an induction machine. Two systems are presented: a system to adaptively control the stator currents via identification of the electrical dynamics; and a system to adaptively control the rotor speed via identification of the mechanical and current-fed system dynamics. Various advantages of these control schemes over other conventional schemes are cited and the performance of the combined speed and current control scheme is compared with that of the standard vector control scheme

Vector control of a high power induction machine

The design and implementation of a high-power (2 MW peak) vector control drive is described. The inverter switching frequency is low, resulting in high-harmonic-content current waveforms. A block diagram of the physical system is given, and each component is described in some detail. The problem of commanded slip noise sensitivity, inherent in high-power vector control drives, is discussed, and a solution is proposed. Results are given which demonstrate the successful functioning of the system