The response to and effects of microcomputers in the education sector:the introduction of an innovation in local authority secondary schools

The study addresses the introduction of an innovation of new technology into a bureaucratic profession. The organisational setting is that of local authority secondary schools at a time at which microcomputers were being introduced in both the organisational core (for teaching) and its periphery (school administration). The research studies innovation-adopting organisations within their sectoral context; key actors influencing the innovation are identified at the levels of central government, local government and schools.A review of the literature on new technology and innovation (including educational innovation), and on schools as organisations in a changing environment leads to the development of the conceptual framework of the study using a resource dependency model within a cycle of the acquisition, allocation and utilisation of financial, physical and intangible resources. The research methodology is longitudinal and draws from both positivist and interpretive traditions. lt includes an initial census of the two hundred secondary schools in four local education authorities, a final survey of the same population, and four case studies, using both interview methods and documentation. Two modes of innovation are discerned. In respect of administrative use a rationalising, controlling mode is identified, with local education authorities developing standardised computer-assisted administrative systems for use in schools. In respect of curricular use, in contrast, teachers have been able to maintain an indeterminate occupational knowledge base, derived from an ideology of professionalism in respect of the classroom use of the technology. The mode of innovation in respect of curricular use has been one of learning and enabling. The resourcing policies of central and local government agencies affect the extent of use of the technology for teaching purposes, but the way in which it is used is determined within individual schools, where staff with relevant technical expertise significantly affect the course of the innovation.

Minority influence and innovation:antecedents, processes and consequences

Social groups form an important part of our daily lives. Within these groups pressures exist which encourage the individual to comply with the group’s viewpoint. This influence, which creates social conformity, is known as ‘majority influence’ and is the dominant process of social control. However, there also exists a ‘minority influence’, which emerges from a small subsection of the group and is a dynamic force for social change. Minority Influence and Innovation seeks to identify the conditions under which minority influence can prevail, to change established norms, stimulate original thinking and help us to see the world in new ways. With chapters written by a range of expert contributors, areas of discussion include: •processes and theoretical issues •the factors which affect majority and minority influence •interactions between majority and minority group members This book offers a thorough evaluation of the most important current developments within this field and presents consideration of the issues that will be at the forefront of future research. As such it will be of interest to theorists and practitioners working in social psychology. This book offers a thorough evaluation of the most important current developments within this field and presents consideration of the issues that will be at the forefront of future research. As such it will be of interest to theorists and practitioners working in social psychology.

Professional standards research:job satisfaction and innovation

Job satisfaction is a significant predictor of organisational innovation – especially where employees (including shop-floor workers) experience variety in their jobs and work in a single-status environment. The relationship between job satisfaction and performance has long intrigued work psychologists. The idea that "happy workers are productive workers" underpins many theories of performance, leadership, reward and job design. But contrary to popular belief, the relationship between job satisfaction and performance at individual level has been shown to be relatively weak. Research investigating the link between job satisfaction and creativity (the antecedent to innovation) shows that job dissatisfaction promotes creative outcomes. The logic is that those who are dissatisfied (and have decided to stay with the organisation) are determined to change things and have little to lose in doing so (see JM George & J Zhou, 2002). We were therefore surprised to find in the course of our own research into managerial practices and employee attitudes in manufacturing organisations that job satisfaction was a highly significant predictor of product and technological innovation. These results held even though the research was conducted longitudinally, over two years, while controlling for prior innovation. In other words, job satisfaction was a stronger predictor of innovation than any pre-existing orientation organisations had towards working innovatively. Using prior innovation as a control variable, as well as a longitudinal research design, strengthened our case against the argument that people are satisfied because they belong to a highly innovative organisation. We found that the relationship between job satisfaction and innovation was stronger still where organisations showed that they were committed to promoting job variety, especially at shop-floor level. We developed precise instruments to measure innovation, taking into account the magnitude of the innovation both in terms of the number of people involved in its implementation, and how new and different it was. Using this instrument, we are able to give each organisation in our sample a "score" from one to seven for innovation in areas ranging from administration to production technology. We found that much innovation is incremental, involving relatively minor improvements, rather than major change. To achieve sustained innovation, organisations have to draw on the skills and knowledge of employees at all levels. We also measured job satisfaction at organisational level, constructing a mean "job satisfaction" score for all organisations in our sample, and drawing only on those companies whose employees tended to respond in a similar manner to the questions they were asked. We argue that where most of the workforce experience job satisfaction, employees are more likely to collaborate, to share ideas and aim for high standards because people are keen to sustain their positive feelings. Job variety and single-status arrangements further strengthen the relationship between satisfaction and performance. This makes sense; where employees experience variety, they are exposed to new and different ideas and, provided they feel positive about their jobs, are likely to be willing to try to apply these ideas to improve their jobs. Similarly, staff working in single-status environments where hierarchical barriers are reduced are likely to feel trusted and valued by management and there is evidence (see G Jones & J George, 1998) that people work collaboratively and constructively with those they trust. Our study suggests that there is a strong business case for promoting employee job satisfaction. Managers and HR practitioners need to ensure their strategies and practices support and sustain job satisfaction among their workforces to encourage constructive, collaborative and creative working. It is more important than ever for organisations to respond rapidly to demands of the external environment. This study shows the positive association between organisational-level job satisfaction and innovation. So if a happy workforce is the key to unlocking innovation and organisations want to thrive in the global economy, it is vital that managers and HR practitioners pay close attention to employee perceptions of the work environment. In a world where the most innovative survive it could make all the difference.

Externalities of openness in innovation

Discussion of open innovation has typically stressed the benefits to the individual enterprise from boundary-spanning linkages and improved internal knowledge sharing. In this paper we explore the potential for wider benefits from openness in innovation and argue that openness may itself generate positive externalities by enabling improved knowledge diffusion. The potential for these (positive) externalities suggests a divergence between the private and social returns to openness and the potential for a sub-optimal level of openness where this is determined purely by firms' private returns. Our analysis is based on Irish plant-level panel data from manufacturing industry over the period 1994-2008. Based on instrumental variables regression models our results suggest that externalities of openness in innovation are significant and that they are positively associated with firms' innovation performance. We find that these externality effects are unlikely to work through their effect on the spread of open innovation practices. Instead, they appear to positively influence innovation outputs by either increasing knowledge diffusion or strengthening competition. Our evidence on the significance of externalities from openness in innovation provides a rationale for public policy aimed at promoting open innovation practices among firms. © 2013 Elsevier B.V. All rights reserved.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Dynamic complementarities in innovation strategies

Using a panel of Irish manufacturing plants over the period 1991-2008 we test for dynamic complementarities in the joint use of internal R&D and external knowledge sources. We find little evidence, either from considering successive cross-sectional waves of comparable surveys, or in terms of the strategy switch choices of specific plants, that there has been a systematic move towards the joint use of internal and external knowledge in innovation. We then test formally for the presence of complementarities in the joint use of internal R&D and external innovation linkages. In static terms we find no evidence of complementarity, but in dynamic terms find evidence that strategy switches by individual plants towards a more 'open' strategy are accompanied by increased innovation outputs.

Market orientation, innovation capability and business performance:insights from the global financial crisis

Purpose - The paper aims to examine the role of market orientation (MO) and innovation capability in determining business performance during an economic upturn and downturn. Design/methodology/approach - The data comprise two national-level surveys conducted in Finland in 2008, representing an economic boom, and in 2010 when the global economic crisis had hit the Finnish market. Partial least square path analysis is used to test the potential mediating effect of innovation capability on the relationship between MO and business performance during economic boom and bust. Findings - The results show that innovation capability fully mediates the performance effects of a MO during an economic upturn, whereas the mediation is only partial during a downturn. Innovation capability also mediates the relationship between a customer orientation and business performance during an upturn, whereas the mediating effect culminates in a competitor orientation during a downturn. Thus, the role of innovation capability as a mediator between the individual market-orientation components varies along the business cycle. Originality/value - This paper is one of the first studies that empirically examine the impact of the economic cycle on the relationship between strategic marketing concepts, such as MO or innovation capability, and the firm's business performance.

Public policy and electrical-grid sector innovation

Purpose – This paper aims to investigate the manner in which technological innovation in the European electrical-grid sector has developed by focusing, in particular, on the effect of public policy on innovation. To achieve this aim, this paper highlights how technological innovation and development progressed from the 1960s to the 1980s, and contrasts this period with the deregulated/privatization environment. Design/methodology/approach – The paper is based on a series of in-depth multiple company case studies of grid companies, some of their suppliers and other actors in their broader business network. Empirical data were collected through 55 interviews. Findings – The authors find that a phase of mutual collaboration was encouraged in the first period, which led to strong technological innovation with a focus on product quality and the development of functionality. Buyers played a pivotal role in the development of products and posed technical requirements. In contrast, the current role of the buyer has transformed principally into one of evaluating competing bids for specific projects. Today, buyers face increasing pressure to substantially lower CO2 emissions and transform the energy grid system. These goals are difficult to achieve without a new way of thinking about innovation. Research limitations/implications – Models to achieve innovation must not only focus on individual research projects; instead, the innovation should be factored into normal business dealings in the supply chain. Practical implications – We propose that policymakers and regulators need to: accommodate for innovation and address the collaborative elements of innovation when developing policies and regulations. Furthermore, regulators have the option of either developing a strategic vision for the electrical-grid network or incorporating sustainability into the evaluation of electrical grids and, thus, consumers’ willingness to pay. Originality/value – This paper makes a distinctive contribution in the area of innovation for electrical grids. Our paper shows how innovation and the development of new technology for electrical grids changed over time. Furthermore, this paper describes the energy sector in terms of a business network comprising the different actors involved in innovation and development and, thus, their role in the energy supply chain.

Identifying the configurational paths to innovation in SMEs:a fuzzy-set qualitative comparative analysis

Using fuzzy-set qualitative comparative analysis (fsQCA), this study investigates the conditions leading to a higher level of innovation. More specifically, the study explores the impact of inter-organisational knowledge transfer networks and organisations' internal capabilities on different types of innovation in Small to Medium size Enterprises (SMEs) in the high-tech sector. A survey instrument was used to collect data from a sample of UK SMEs. The findings show that although individual factors are important, there is no need for a company to perform well in all the areas. The fsQCA, which enables the examination of the impacts of different combinations of factors, reveals that there are a number of paths to achieve better incremental and radical innovation performance. Companies need to choose the one that is closest to their abilities and fits best with their resources.

Measuring employee innovation:a review of existing scales and the development of the innovative behavior and innovation support inventories across cultures

Purpose - The paper develops a model of employee innovative behavior conceptualizing it as distinct from innovation outputs and as a multi-faceted behavior rather than a simple count of ‘innovative acts’ by employees. It understands individual employee innovative behaviors as a micro-foundation of firm intrapreneurship that is embedded in and influenced by contextual factors such as managerial, organizational and cultural support for innovation. Building from a review of existing employee innovative behavior scales and theoretical considerations we develop and validate the Innovative Behavior Inventory (IBI) and the Innovation Support Inventory (ISI). Design/methodology/approach – Two pilot studies, a third validation study in the Czech Republic and a fourth cross-cultural validation study using population representative samples from Switzerland, Germany, Italy and the Czech Republic (N=2812 employees and 450 entrepreneurs) were conducted. Findings - Both inventories were reliable and showed factorial, criterion, convergent and discriminant validity as well as cross-cultural equivalence. Employee innovative behavior was supported as comprising of idea generation, idea search, idea communication, implementation starting activities, involving others and overcoming obstacles. Managerial support was the most proximal contextual influence on innovative behavior and mediated the effect of organizational support and national culture. Originality/value - The paper advances our understanding of employee innovative behavior as a multi-faceted phenomenon and the contextual factors influencing it. Where past research typically focuses on convenience samples within a particular country, we offer first robust evidence that our model of employee innovative behavior generalizes across cultures and types of samples. Our model and the IBI and ISI inventories enable researchers to build a deeper understanding of the important micro-foundation underpinning intrapreneurial behavior in organizations and allow practitioners to identify their organizations’ strengths and weaknesses related to intrapreneurship.

Food SMEs’ innovation profile – the Hungarian case

The small and medium sized enterprises (SMEs) in the Hungarian agri-food sector play determining role. The innovation capacity (efforts, activities and results) however of the individual SMEs is very limited. Food production (including SMEs) has to fulfil food safety requirements in a rapidly increasing extent, which implies a continuous innovation and development process from all market players. In Hungary the agri-food sector had to face a suddenly increased competition especially after the EU enlargement. Based on survey data this paper examines the efforts, activities and results in knowledge acquisition, utilisation, coordination and transfer in the Central Hungarian food SMEs. We have found (using ordered logistic regression) that R&D expenditures, achieved innovations, export/import orientation as well as the networking activity of the SMEs play significant role in market development.

Innovation across the food chain – the Hungarian case

The small and medium sized enterprises (SMEs) in the Hungarian agri-food sector play determining role. The innovation capacity (efforts, activities and results) however of the individual SMEs is very limited. Food production (including SMEs) has to fulfil food safety requirements in a rapidly increasing extent, which implies a continuous innovation and development process from all market players. In Hungary the agri-food chain had to face a suddenly increased competition especially after the EU enlargement. Based on survey data this paper examines the efforts, activities and results in knowledge acquisition, utilisation, coordination and transfer in the Central Hungarian food SMEs. We have found (using ordered logistic regression) that R&D expenditures, achieved innovations, export/import orientation as well as the networking activity of the SMEs play significant role in market development.

The impact of creative organizational climate on the innovation activity of medical devices manufacturing firms in Hungary

The purpose of this study was to empirically investigate the impact of creative organizational climate on the innovation activity of medical devices manufacturing firms in Hungary. We applied a combined qualitative and quantitative research model, focusing on two firm’s case studies that are active in the above mentioned sector and differ to a substantial degree in their innovation activities. The connection between innovative climate and innovation was analyzed by comparing their organizational climate and perceptions of organizational members of innovation activities. Our findings revealed that classical models of creative organizational climate explain only partially the differences, although on the level of individual perceptions of climate and innovativeness we can find some connections. We found one factor that differentiated the two firms in terms of organizational climate in the predicted direction: the amount, quality, sincerity and depth of debates going on in the organization. The level of challenge (high involvement, commitment and challenging goals) and the time devoted to think about new ideas and innovative solutions (idea time) turned out to be contrary to the expectations based on previous research – although these results are less significant statistically. The results trigger further research into the sources of competitiveness in the Hungarian medical devices manufacturing sector.

Tradition, innovation and reform in local development. Conference proceedings

Understanding Local Development as the interaction of a complex mosaic of measures, resources and actors requires having an interdisciplinary perspective.‘Local’ means small-scale, focused, and within reach - one would suggest -, while comparing or understanding inter-regional dynamics (putting what we mean by ‘locality’ on the global map) is what brings into sight traits, which can be treated as universal, typical or individual. The sections of the conference tackled this kaleidoscope of themes that has evolved around tradition, innovation and reform, with roots in both academia and policy-making connected to entrepreneurship, governance, economic and social structure, the labor market and human capital.

A systems approach to describing the process of individual adoption of IT innovations

Research on the adoption of innovations by individuals has been criticized for focusing on various factors that lead to the adoption or rejection of an innovation while ignoring important aspects of the dynamic process that takes place. Theoretical process-based models hypothesize that individuals go through consecutive stages of information gathering and decision making but do not clearly explain the mechanisms that cause an individual to leave one stage and enter the next one. Research on the dynamics of the adoption process have lacked a structurally formal and quantitative description of the process. ^ This dissertation addresses the adoption process of technological innovations from a Systems Theory perspective and assumes that individuals roam through different, not necessarily consecutive, states, determined by the levels of quantifiable state variables. It is proposed that different levels of these state variables determine the state in which potential adopters are. Various events that alter the levels of these variables can cause individuals to migrate into different states. ^ It was believed that Systems Theory could provide the required infrastructure to model the innovation adoption process, particularly applied to information technologies, in a formal, structured fashion. This dissertation assumed that an individual progressing through an adoption process could be considered a system, where the occurrence of different events affect the system's overall behavior and ultimately the adoption outcome. The research effort aimed at identifying the various states of such system and the significant events that could lead the system from one state to another. By mapping these attributes onto an “innovation adoption state space” the adoption process could be fully modeled and used to assess the status, history, and possible outcomes of a specific adoption process. ^ A group of Executive MBA students were observed as they adopted Internet-based technological innovations. The data collected were used to identify clusters in the values of the state variables and consequently define significant system states. Additionally, events were identified across the student sample that systematically moved the system from one state to another. The compilation of identified states and change-related events enabled the definition of an innovation adoption state-space model. ^