A hormonal misunderstanding in Acca sellowiana embryogenesis: levels of zygotic embryogenesis do not match those of somatic embryogenesis

Endogenous levels of IAA, ABA and four types of CKs were analyzed in zygotic and indirect (ISE) and direct somatic embryogenesis of Acca sellowiana. Zygotic and somatic embryos at different developmental stages were sampled for morphological and hormonal analysis. Both embryo types showed substantial asymmetry in hormone levels. Zygotic embryos displayed a conspicuous peak of IAA in early developmental stages. The results outlined the hormonal variations occurring during zygotic and somatic embryogenesis regarding the timing, nature and hormonal status involved in both processes. The short transient pulse of IAA observed on the 3rd day in culture was suggested to be involved with the signaling for the induction of somatic embryogenesis. Fertilized ovule development was associated with increased IAA levels 21-24 days after pollination, followed by a sharp decrease in the cotyledonary stage, both in zygotic and somatic embryos. There was a prominent increase in ABA levels in cultures which generated ISE 24-30 days after pollination, a period that corresponds to the heart and torpedo stages. The levels of total CKs (Z, [9R]Z, iP and [9R]iP) were also always higher in zygotic than in somatic embryogenesis. While zygotic embryogenesis was dominated by the presence of zeatin, the somatic process, contrarily, was characterized by a large variation of the other cytokinin forms and amounts studied. The above results, when taken together, could be related to the previously observed high frequency formation of anomalous somatic embryos formed in A. sellowiana, as well as to their low germination ability.

Evaluation of the micro-hardness and fracture toughness of amorphous and partially crystallized 3CaO center dot P2O5-SiO2-MgO bioglasses

In this work, the effect of the indentation load on the results of hardness and fracture toughness, determined by Vickers micro-hardness measurements, of some glasses and glass-ceramics has been investigated. Furthermore, in order to verify the effect of crystallinity on the results, glasses of composition 52.75 wt.% 3CaO center dot P2O5, 30 wt.% SiO2 and 17.25 wt.% MgO were fused at 1600 degrees C for 4 h and annealed at 700 degrees C for 2h, and further heat-treated at 700, 775, 800 and 900 degrees C for 4h. The obtained materials were analyzed by high resolution X-ray diffraction, HRXRD, to determine the crystallization degree in function of the heat-treatment temperature. The hardness of the different specimens was determined by Vickers' micro-hardness measurements under various loads. It has been observed that with increasing crystallization of the materials their hardness increased. Furthermore, it has been possible to verify the so-called indentation size effect (ISE), i.e. hardness decreases as the indentation depth, under higher loads, increases. This effect has been more pronounced in the glass-ceramic samples. Fracture toughness has been determined by the crack length induced by the Vickers indentations and relating them to the applied loads. Glass materials presented a fracture pattern with characteristics of cleavage, forming cracks of the half-penny shaped type, while the glass-ceramic materials exhibited crack bridging effects and Palmqvist type cracks. (C) 2011 Elsevier B.V. All rights reserved.

Delivery Levels of Support Competencies to Organizational Eco-efficiency: a case study in an electro-electronics sector industry

This article aims to develop and implement a search tool which, through the perception of its respondents, allows assessing how eco-efficient an organization is based on the identification of delivery levels of support competencies to organizational eco-efficiency. A mixed (qualitative and quantitative) exploratory-descriptive research was conducted, from a case study in an 'ISE Company'. A semi-structured interview and pictures of verification were used as data collection instruments. The data were analyzed via documentary analysis and triangulation of information collected. It was inferred that at the 'ISE Company' professionals at the high-level of the organizational hierarchy recognize, in part, the growth of organizational actions that contribute to sustainability, which is not fully consistent with national publications on the subject. The result of the research showed that organizational strategies addressing eco-efficiency are partially aligned with the professional performance of the organization.

Are sustainable companies less risky and more profitable?

The purpose of this study was to determine whether there were significant differences in accounting indicators when comparing sustainable enterprises to other similar companies that are not considered as sustainable. The Corporate Sustainability Index of BM (São Paulo Stock, Commodities and Futures Exchange) was the criterion selected to break down the samples into sustainable and non-sustainable enterprises. The accounting indicators were separated into two kinds: risk (dividend payout, percentage growth of assets, financial leverage, current liquidity, asset size, variability of earnings, and accounting beta) and return (ROA, ROE, asset turnover, and net margin). We individually analyzed the companies in the energy sector, followed by those in the banking sector, as well as the entire ISE portfolio as of 2008/2009, including all the sectors. Mann-Whitney tests were performed in order to verify the difference of the means between the groups (ISE and non-ISE). The results, considering the method chosen and the time span covered by the study, indicate that there are no differences between sustainable companies and the others, when they are assessed by the accounting indicators used here.

Caratterizzazione meccanica multiscala di materiali rocciosi strutturalmente complessi

The research work was aimed at studying, with a deterministic approach, the relationships between the rock’s texture and its mechanical properties determined at the laboratory scale. The experimentation was performed on a monomineralic crystalline rock, varying in texture, i.e. grains shape. Multi-scale analysis has been adopted to determine the elasto-mechanical properties of the crystals composing the rock and its strength and deformability at the macro-scale. This let us to understand how the structural variability of the investigated rock affects its macromechanical behaviour. Investigations have been performed on three different scales: nano-scale (order of nm), micro-scale (tens of m) and macro-scale (cm). Innovative techniques for rock mechanics, i.e. Depth Sensing Indentation (DSI), have been applied, in order to determine the elasto-mechanical properties of the calcite grains. These techniques have also allowed to study the influence of grain boundaries on the mechanical response of calcite grains by varying the indents’ sizes and to quantify the effect of the applied load on the hardness and elastic modulus of the grain (indentation size effect, ISE). The secondary effects of static indentation Berkovich, Vickers and Knoop were analyzed by SEM, and some considerations on the rock’s brittle behaviour and the effect of microcracks can be made.

Growth hormone (GH)-releasing hormone increases the expression of the dominant-negative GH isoform in cases of isolated GH deficiency due to GH splice-site mutations

An autosomal dominant form of isolated GH deficiency (IGHD II) can result from heterozygous splice site mutations that weaken recognition of exon 3 leading to aberrant splicing of GH-1 transcripts and production of a dominant-negative 17.5-kDa GH isoform. Previous studies suggested that the extent of missplicing varies with different mutations and the level of GH expression and/or secretion. To study this, wt-hGH and/or different hGH-splice site mutants (GH-IVS+2, GH-IVS+6, GH-ISE+28) were transfected in rat pituitary cells expressing human GHRH receptor (GC-GHRHR). Upon GHRH stimulation, GC-GHRHR cells coexpressing wt-hGH and each of the mutants displayed reduced hGH secretion and intracellular GH content when compared with cells expressing only wt-hGH, confirming the dominant-negative effect of 17.5-kDa isoform on the secretion of 22-kDa GH. Furthermore, increased amount of 17.5-kDa isoform produced after GHRH stimulation in cells expressing GH-splice site mutants reduced production of endogenous rat GH, which was not observed after GHRH-induced increase in wt-hGH. In conclusion, our results support the hypothesis that after GHRH stimulation, the severity of IGHD II depends on the position of splice site mutation leading to the production of increasing amounts of 17.5-kDa protein, which reduces the storage and secretion of wt-GH in the most severely affected cases. Due to the absence of GH and IGF-I-negative feedback in IGHD II, a chronic up-regulation of GHRH would lead to an increased stimulatory drive to somatotrophs to produce more 17.5-kDa GH from the severest mutant alleles, thereby accelerating autodestruction of somatotrophs in a vicious cycle.

Isolated autosomal dominant growth hormone deficiency: stimulating mutant GH-1 gene expression drives GH-1 splice-site selection, cell proliferation, and apoptosis

The majority of mutations that cause isolated GH deficiency type II (IGHD II) affect splicing of GH-1 transcripts and produce a dominant-negative GH isoform lacking exon 3 resulting in a 17.5-kDa isoform, which further leads to disruption of the GH secretory pathway. A clinical variability in the severity of the IGHD II phenotype depending on the GH-1 gene alteration has been reported, and in vitro and transgenic animal data suggest that the onset and severity of the phenotype relates to the proportion of 17.5-kDa produced. The removal of GH in IGHD creates a positive feedback loop driving more GH expression, which may itself increase 17.5-kDa isoform productions from alternate splice sites in the mutated GH-1 allele. In this study, we aimed to test this idea by comparing the impact of stimulated expression by glucocorticoids on the production of different GH isoforms from wild-type (wt) and mutant GH-1 genes, relying on the glucocorticoid regulatory element within intron 1 in the GH-1 gene. AtT-20 cells were transfected with wt-GH or mutated GH-1 variants (5'IVS-3 + 2-bp T->C; 5'IVS-3 + 6 bp T->C; ISEm1: IVS-3 + 28 G->A) known to cause clinical IGHD II of varying severity. Cells were stimulated with 1 and 10 mum dexamethasone (DEX) for 24 h, after which the relative amounts of GH-1 splice variants were determined by semiquantitative and quantitative (TaqMan) RT-PCR. In the absence of DEX, only around 1% wt-GH-1 transcripts were the 17.5-kDa isoform, whereas the three mutant GH-1 variants produced 29, 39, and 78% of the 17.5-kDa isoform. DEX stimulated total GH-1 gene transcription from all constructs. Notably, however, DEX increased the amount of 17.5-kDa GH isoform relative to the 22- and 20-kDa isoforms produced from the mutated GH-1 variants, but not from wt-GH-1. This DEX-induced enhancement of 17.5-kDa GH isoform production, up to 100% in the most severe case, was completely blocked by the addition of RU486. In other studies, we measured cell proliferation rates, annexin V staining, and DNA fragmentation in cells transfected with the same GH-1 constructs. The results showed that that the 5'IVS-3 + 2-bp GH-1 gene mutation had a more severe impact on those measures than the splice site mutations within 5'IVS-3 + 6 bp or ISE +28, in line with the clinical severity observed with these mutations. Our findings that the proportion of 17.5-kDa produced from mutant GH-1 alleles increases with increased drive for gene expression may help to explain the variable onset progression, and severity observed in IGHD II.

Träume vom Anderen

Die traditionelle japanische Architektur mit ihrer Leere und Sachlichkeit wurde zwischen 1930 und 1950 zu einem Referenzmodell für die Moderne. Doch die Wahrnehmung der gestalterischen Qualitäten der japanischen Baukunst in Europa erfolgte spät. Manfred Speidel untersucht in seinem Beitrag die Schritte und die Motive für die Wahrnehmung der japanischen Baukunst in Deutschland – ein Prozess der bis heute vom "Überraschtsein" erzählt, in Asien grundlegende Ziele der Moderne wiederzufinden.

Motivational profiles of sport event volunteers.

Aim of the study Due to the valuable contribution made by volunteers to sporting events, a better understanding of volunteers’ motivation is imperative for event managers in order to develop effective volunteer re-cruitment and retention strategies. The adoption of working conditions and task domains to the mo-tives and needs of volunteers is one of the key challenges in volunteer management. Conversely, an ignorance of the motives and needs of volunteers could negatively affect their performance and attitude, which will have negative consequences for the execution of events (Strigas & Jackson, 2003). In general, the motives of volunteers are located on a continuum between selflessness (e.g. helping others), and self-interest (e.g. pursuing one’s own interests). Furthermore, it should take into account that volunteers may be motivated by more than one need or goal, and therefore, configure different bundles of motives, resulting in heterogeneous types of motives for voluntary engagement (Dolnicar & Randle, 2007). Despite the extensive number of studies on the motives of sport event volunteers, only few studies focus on the analysis of individual motive profiles concerning volun-teering. Accordingly, we will take a closer look at the following questions: To what extent do volun-teers at sporting events differ in the motives of their engagement, and how can the volunteers be ade-quately classified? Theoretical Background According to the functional approach, relevant subjective motives are related to the outcomes and consequences that volunteering is supposed to lead to and to produce. This means, individuals’ mo-tives determine which incentives are anticipated in return for volunteering (e.g. increase in social contacts), and are important for engaging in volunteering, e.g. the choice between different oppor-tunities for voluntary activity, or different tasks (Stukas et al., 2009). Additionally, inter-individual differences of motive structures as well as matching motives in the reflections of voluntary activities will be considered by using a person-oriented approach. In the person-oriented approach, it is not the specific variables that are made the entities of investigation, but rather persons with a certain combination of characteristic features (Bergmann et al., 2003). Person-orientation in the field of sports event volunteers, it is therefore essential to implement an orientation towards people as a unit of analysis. Accordingly, individual motive profiles become the object of investigation. The individ-ual motive profiles permit a glimpse of intra-individual differences in the evaluation of different motive areas, and thus represent the real subjective perspective. Hence, a person will compare the importance of individual motives for his behaviour primarily in relation to other motives (e.g. social contacts are more important to me than material incentives), and make fewer comparisons with the assessments of other people. Methodology, research design and data analysis The motives of sports event volunteers were analysed in the context of the European Athletics Championships 2014 in Zürich. After data cleaning, the study sample contained a total of 1,169 volunteers, surveyed by an online questionnaire. The VMS-ISA scale developed by Bang and Chel-ladurai (2009) was used and replicated successfully by a confirmatory factor analysis. Accordingly, all seven factors of the scale were included in the subsequent cluster analysis to determine typical motive profiles of volunteers. Before proceeding with the cluster analysis, an intra-individual stand-ardization procedure (according to Spiel, 1998) was applied to take advantage of the intra-individual relationships between the motives of the volunteers. Intra-individual standardization means that every value of each motive dimension was related to the average individual level of ex-pectations. In the final step, motive profiles were determined using a hierarchic cluster analysis based on Ward’s method with squared Euclidean distances. Results, discussion and implications The results reveal that motivational processes differ among sports event volunteers, and that volunteers sometimes combine contradictory bundles of motives. In our study, four different volunteer motive profiles were identified and described by their positive levels on the individual motive dimension: the community supporters, the material incentive seekers, the social networkers, and the career and personal growth pursuers. To describe the four identified motive profiles in more detail and to externally validate them, the clusters were analysed in relation to socio-economic, sport-related, and voluntary work characteristics. This motive-based typology of sports event volunteers can provide valuable guidance for event managers in order to create distinctive and designable working conditions and tasks at sporting events that should, in relation to a person-oriented approach, be tailored to a wide range of individ-ual prerequisites. Furthermore, specific recruitment procedures and appropriate communication measures can be defined in order to approach certain groups of potential volunteers more effectively. References Bang, H., & Chelladurai, P. (2009). Development and validation of the volunteer motivations scale for international sporting events (VMS-ISE). International Journal Sport Management and Market-ing, 6, 332-350. Bergmann, L. R., Magnusson, D., & El-Khouri, B. M. (2003). Studying individual development in an interindividual context. Mahwah, NJ: Erlbaum. Dolnicar, S., & Randle, M. (2007). What motivates which volunteers? Psychographic heterogeneity among volunteers in Australia. Voluntas, 18, 135-155. Spiel, C. (1998). Four methodological approaches to the study of stability and change in develop-ment. Methods of Psychological Research Online, 3, 8-22. Stukas, A. A., Worth, K. A., Clary, E. G., & Snyder, M. (2009). The matching of motivations to affordances in the volunteer environment: an index for assessing the impact of multiple matches on volunteer outcomes. Nonprofit and Voluntary Sector Quarterly, 38, 5-28.

Molecular control of cardiac sodium homeostasis in health and disease.

INTRODUCTION Cardiac myocytes utilize three high-capacity Na transport processes whose precise function can determine myocyte fate and the triggering of arrhythmias in pathological settings. We present recent results on the regulation of all three transporters that may be important for an understanding of cardiac function during ischemia/reperfusion episodes. METHODS AND RESULTS Refined ion selective electrode (ISE) techniques and giant patch methods were used to analyze the function of cardiac Na/K pumps, Na/Ca exchange (NCX1), and Na/H exchange (NHE1) in excised cardiac patches and intact myocytes. To consider results cohesively, simulations were developed that account for electroneutrality of the cytoplasm, ion homeostasis, water homeostasis (i.e., cell volume), and cytoplasmic pH. The Na/K pump determines the average life-time of Na ions (3-10 minutes) as well as K ions (>30 minutes) in the cytoplasm. The long time course of K homeostasis can determine the time course of myocyte volume changes after ion homeostasis is perturbed. In excised patches, cardiac Na/K pumps turn on slowly (-30 seconds) with millimolar ATP dependence, when activated for the first time. In steady state, however, pumps are fully active with <0.2 mM ATP and are nearly unaffected by high ADP (2 mM) and Pi (10 mM) concentrations as may occur in ischemia. NCX1s appear to operate with slippage that contributes to background Na influx and inward current in heart. Thus, myocyte Na levels may be regulated by the inactivation reactions of the exchanger which are both Na- and proton-dependent. NHE1 also undergo strong Na-dependent inactivation, whereby a brief rise of cytoplasmic Na can cause inactivation that persists for many minutes after cytoplasmic Na is removed. This mechanism is blocked by pertussis toxin, suggesting involvement of a Na-dependent G-protein. Given that maximal NCX1- and NHE1-mediated ion fluxes are much greater than maximal Na/K pump-mediated Na extrusion in myocytes, the Na-dependent inactivation mechanisms of NCX1 and NHE1 may be important determinants of cardiac Na homeostasis. CONCLUSIONS Na/K pumps appear to be optimized to continue operation when energy reserves are compromised. Both NCX1 and NHE1 activities are regulated by accumulation of cytoplasmic Na. These principles may importantly control cardiac cytoplasmic Na and promote myocyte survival during ischemia/reperfusion episodes by preventing Ca overload.

Motivational profiles of sporting event volunteers

This article presents an approach for segmenting sporting event volunteers according to differences in their motives. Empirical data were obtained from a sample of 1169 volunteers who registered for the 2014 European Athletics Championships in Zürich. They completed the ‘Volunteer Motivation Scale for International Sporting Events’ (VMS-ISE) questionaire. The validity of the VMS-ISE was replicated by confirmatory factor analysis and the data were cluster analysed to identify distinct motivation-based volunteer profiles. These segmented volunteers on the basis of mutually exclusive motivational characteristics. The external validity of the four motivation-based types (‘community supporters’, ‘material incentive seekers’, ‘social networkers’ and ‘career and personal growth orienteers’) was confirmed with socio-economic, sport-related and volunteer activity-related variables. It is concluded that motivation-based segmentation represents a useful way of gaining a clearer understanding of the patterns underlying the heterogeneity of sporting events volunteers.

Tipología de Replicaciones para la Síntesis de Experimentos en Ingeniería del Software

La Ingenieria del Software Experimental (ISE) traslada a la Ingenieria del Software (IS) el paradigma experimental que se ha aplicado con exito en diversas disciplinas cientificas. El objetivo de la ISE es hacer de la construccion del software una actividad predecible gracias al conocimiento de las relaciones entre los procesos de produccion del software y los productos que se obtienen. Para avanzar en el paradigma experimental en IS no es suficiente aplicar las tecnicas de diseno experimental y el analisis estadistico de datos, sino que es necesario construir una metodologia (bien desde cero o adaptada de otras disciplinas) basada en los principios generales del experimentalismo. La motivacion principal de esta investigacion es trabajar en la adaptacion de un aspecto particular del paradigma experimental a la experimentacion en IS: la replicación. En ISE se han realizado varias replicaciones de experimentos, sin embargo, aun existe discusion sobre el modo mas adecuado de llevarlas a cabo. Algunas preguntas que surgen de esta discusion son: .se deben reutilizar los materiales del experimento base?, .la replicacion debe realizarse de forma independiente, o puede existir algun tipo de comunicacion entre experimentadores y replicadores?, .que elementos de la estructura del experimento a replicar pueden variarse y aun considerarse una replicacion? En esta investigacion se estudia el concepto de replicacion desde una perspectiva teorico-practica para su incorporacion a la ISE. En concreto, se persiguen los siguientes objetivos: 1) estudio del concepto de replicacion en distintas disciplinas cientificas para tener mayor comprension de su importacion a la ISE, 2) desarrollo de una tipologia de replicaciones que ayude a comprender tanto los diferentes tipos de replicacion que pueden llevarse a cabo en ISE, asi como el papel que cada uno de estos tipos desempena en la verificacion de resultados experimentales y 3) desarrollo de un marco conceptual con ideas clave para comparar conjuntos de replicaciones y obtener conocimiento de ellas que sea de utilidad tanto para el profesional como para el investigador. Para la evaluacion de las propuestas de esta tesis se usa un conjunto de 20 replicaciones de diversos autores donde entre otros aspectos se evalua la efectividad de tres tecnicas de evaluacion de software.

The NACIR Project: New Applications for CPV'S: A fast way to improve reliability and Technology progress

The main goal of this proposal is to join together the owners of the most advanced CPV technology, with respect to the state of the art, in order to research from its leading position new applications for CPV systems. In addition to opening up new markets, it will unveil possible sources of failure in new environments outside Europe, in order to assure component reliability. The proposed project will also try to improve the current technology of the industrial partners (ISOFOTON and CONCENTRIX) by accelerating the learning curve that CPV must follow in order to reach the competitive market, and lowering the cost under the current flat panel PV significantly within 3-4 years. The use of CPV systems in remote areas, together with harsher radiation, ambient and infrastructure conditions will help to increase the rate of progress of this technology. In addition, the ISFOC s contribution, which brings together seven power plants from seven CPV technologies up to 3 MWpeak, will allow creating the most complete database of components and systems performance to be generated as well as the effects of radiation and meteorology on systems operations. Finally, regarding the new applications for CPV subject, the project will use a CPV system sized 25 kWp in a stand-alone station in Egypt (NWRC) for the first time for water pumping and irrigation purposes. In a similar way ISOFOTON will connect up to 25 kWp CPV to the Moroccan ONE utility grid. From the research content point of view of this project, which is directly addressed by the scope of the call, the cooperative research between UPM, FhG-ISE and the two companies will be favoured by the fact that all are progressing in similar directions: developing two-stage optics CPV systems. In addition to these technology improvements the UPM is very interested in developing a new concept of module, recently patented, which will fulfil all required characteristics of a good CPV with less components and reducing cost.

Outline of Europe-Japan collaborative research on concentrator photovoltaics

The Europe-Japan Collaborative Research Project on Concentrator Photovoltaics (CPV) has been initiated under support by the EC (European Commission) and NEDO (New Energy and Industrial Technology Development Organization) since June 2011. This is project (NGCPV Project; a New Generation of Concentrator PhotoVoltaic cells, modules and systems) is aiming to accelerate the move to very high efficiency and lower cost CPV technologies and to enhance widespread deployment of CPV systems. 7 organizations such as UPM, FhG-ISE Imperial College, BSQ, CEA-INES, ENEA, and PSE in Europe and 9 organizations such as TTI, Univ. Tokyo, AIST, Sharp Co. Daido Steel Co., Kobe Univ., Miyazaki Univ., Asahi Kasei Co., and Takano Co. participate in this project. The targets of this project are 1) to develop world-record efficiency CPV cells of more than 45%, 2) to develop world-record efficiency CPV modules of 35%, 3) to establish standard measurements of CPV cells and modules, 4) to install 50kW CPV system in Spain, to carry out field test of CPV system and to manage power generation of CPV systems, and 5) to develop high-efficiency and low-cost new materials and structure cells such as III-V-N, III-V-on-Si tandem, quantum dots and wells. This paper presents outline of this project and most recent results such as world record efficiency (37.9% under 1-sun) cell and high-efficiency (43.5% under 240-306 suns) concentrator cell with inverted epitaxial grown InGaP/GaAs/InGaAs 3-junction solar cells.

Percepciones sobre tres técnicas de evaluación de código: un estudio empírico sobre la intuición y las opiniones de los encargados de las pruebas de software

La Ingeniería del Software Empírico (ISE) utiliza como herramientas los estudios empíricos para conseguir evidencias que ayuden a conocer bajo qué circunstancias es mejor usar una tecnología software en lugar de otra. La investigación en la que se enmarca este TFM explora si las intuiciones y/o preferencias de las personas que realizan las pruebas de software, son capaces de predecir la efectividad de tres técnicas de evaluación de código: lectura por abstracciones sucesivas, cobertura de decisión y partición en clases de equivalencia. Para conseguir dicho objetivo, se analizan los datos recogidos en un estudio empírico, realizado por las tutoras de este TFM. En el estudio empírico distintos sujetos aplican las tres técnicas de evaluación de código a tres programas distintos, a los que se les habían introducido una serie de faltas artificialmente. Los sujetos deben reportar los fallos encontrados en los programas, así como, contestar a una serie de preguntas sobre sus intuiciones y preferencias. A la hora de analizar los datos del estudio, se ha comprobado: 1) cuáles son sus intuiciones y preferencias (mediante el test estadístico X2 de Pearson); 2) si los sujetos cambian de opinión después de aplicar las técnicas (para ello se ha utilizado índice de Kappa, el Test de McNemar-Bowker y el Test de Stuart-Maxwell); 3) la consistencia de las distintas preguntas (mediante el índice de Kappa), comparando: intuiciones con intuiciones, preferencias con preferencias e intuiciones con preferencias; 4) Por último, si hay coincidencia entre las intuiciones y preferencias con la efectividad real obtenida (para ello se ha utilizado, el Modelo Lineal General con medidas repetidas). Los resultados muestran que, no hay una intuición clara ni tampoco una preferencia concreta, con respecto a los programas. Además aunque existen cambios de opinión después de aplicar las técnicas, no se encuentran evidencias claras para afirmar que la intuición y preferencias influyen en su efectividad. Finalmente, existen relaciones entre las intuiciones con intuiciones, preferencias con preferencias e intuiciones con preferencias, además esta relación es más notoria después de aplicar las técnicas. ----ABSTRACT----Empirical Software Engineering (ESE) uses empirical studies as a mean to generate evidences to help determine under what circumstances it is convenient to use a given software technology. This Master Thesis is part of a research that explores whether intuitions and/or preferences of testers, can be used to predict the effectiveness of three code evaluation techniques: reading by stepwise abstractions, decision coverage and equivalence partitioning. To achieve this goal, this Master Thesis analyzes the data collected in an empirical study run by the tutors. In the empirical study, different subjects apply three code evaluation techniques to three different programs. A series of faults were artificially introduced to the programs. Subjects are required to report the defects found in the programs, as well as answer a series of questions about their intuitions and preferences. The data analyses test: 1) what are the intuitions and preferences of the subjects (using the Pearson X2 test); 2) whether subjects change their minds after applying the techniques (using the Kappa coefficient, McNemar-Bowker test, and Stuart-Maxwell test); 3) the consistency of the different questions, comparing: intuitions versus intuitions, preferences versus preferences and preferences versus intuitions (using the Kappa coefficient); 4) finally, if intuitions and/or preferences predict the actual effectiveness obtained (using the General Linear Model, repeated measures). The results show that there is not clear intuition or particular preference with respect to the programs. Moreover, although there are changes of mind after applying the techniques, there are not clear evidences to claim that intuition and preferences influence their effectiveness. Finally, there is a relationship between the intuitions versus intuitions, preferences versus preferences and intuitions versus preferences; this relationship is more noticeable after applying the techniques.