Isolierung von Essigsäure-, Propionsäure- und Buttersäure-bildenden Bakterien aus Biogasanlagen

In der vorliegenden Arbeit wurden Essigsäure-, Propionsäure und Buttersäure-bildende Bakterien aus einer thermophilen und drei mesophilen Biogasanlagen sowie aus zwei Hochdruck-Biogas-Laborfermentern isoliert. Die Fermenter waren mit dem nachwachsenden Rohstoff Maissilage, teilweise mit Rinder- oder Schweinegülle und weiteren festen Inputstoffen gefüttert. Für die Isolierung von Säure-bildenden Bakterien wurde ein Mineralsalzmedium verwendet, welchem als Kohlenstoffquelle Na-DL-Laktat, Succinat, Ethanol, Glycerin, Glucose oder eine Aminosäuremischung (Alanin, Serin, Threonin, Glutaminsäure, Methionin und Cystein) hinzugefügt wurde. Hierbei handelt es sich um Substrate, welche beim anaeroben Abbau während der Hydrolyse oder der primären Gärung entstehen können. Die erhaltenen Isolate waren in der Lage, aus diesen Substraten Essigsäure, Propionsäure oder Buttersäure zu bilden. Insgesamt wurden aus den beprobten Anlagen 49 Isolate gewonnen, welche zu den Phyla Firmicutes, Tenericutes oder Thermotogae gehörten. Mit Hilfe von 16S rDNA-Sequenzen konnten die meisten Isolate als Clostridium sporosphaeroides, Defluviitoga tunisiensis und Dendrosporobacter sp. identifiziert werden. Die Bildung von Essigsäure, Propionsäure oder Buttersäure wurde in Kulturen von Isolaten festgestellt, welche als folgende Arten identifiziert wurden: Bacillus thermoamylovorans, Clostridium aminovalericum, Clostridium cochlearium/Clostridium tetani, Clostridium sporosphaeroides, Dendrosporobacter sp., Proteiniborus sp., Selenomonas bovis und Tepidanaerobacter sp. Zwei Isolate, verwandt mit Thermoanaerobacterium thermosaccharolyticum, konnten Buttersäure und Milchsäure bilden. In Kulturen von Defluviitoga tunisiensis wurde Essigsäurebildung festgestellt. Ein Vergleich der 16S rDNA-Sequenzen mit Datenbanken und die Ergebnisse der PCR-Amplifikationen mit Isolat-spezifischen Primerpaaren ergaben zusätzlich Hinweise, dass es sich bei einigen Isolaten um neue Arten handeln könnte (z. B. Stamm Tepidanaerobacter sp. AS34, Stamm Proteiniborus sp. ASG1.4, Stamm Dendrosporobacter sp. LG2.4, Stamm Desulfotomaculum sp. EG2.4, Stamm Gallicola sp. SG1.4B und Stamm Acholeplasma sp. ASSH51). Durch die Entwicklung Isolat-spezifischer Primerpaare, abgeleitet von 16S rDNA-Sequenzen der Isolate oder Referenzstämmen, konnten die Isolate in Biogasanlagen detektiert und mittels qPCR quantifiziert werden (hauptsächlich im Bereich zwischen 1000 bis 100000000 Kopien der 16S rDNA/g BGA-Probe). Weiterhin konnten die Isolate mit Hilfe physiologischer Versuche charakterisiert und deren Rolle in der anaeroben Abbaukette diskutiert werden. Die Art Defluviitoga tunisiensis scheint eine große Bedeutung in Biogasanlagen zu spielen. Defluviitoga tunisiensis wurde am häufigsten in Untersuchungen im Rahmen der vorliegenden Arbeit isoliert und konnte auch mit Hilfe des entwickelten Primerpaares in hohen Abundanzen in den beprobten Biogasanlagen detektiert werden (10000 - 100000000 Kopien der 16S rDNA/g BGA-Probe). Die manuelle Annotation des Gesamtgenoms sowie die Substratverwertungsversuche haben gezeigt, dass Defluviitoga tunisiensis ein sehr breites Substratspektrum in der Verwertung von Kohlenhydraten besitzt und dadurch möglicherweise eine wichtige Rolle bei der Verwertung von Biomasse in Biogasanlagen einnimmt. Mit Hilfe der Ergebnisse der vorliegenden Arbeit konnten somit neue Einblicke in die zweite Stufe des anaeroben Abbaus, die Acidogenese, in Biogasanlagen gegeben werden. rn

Meprins, membrane-bound and secreted astacin metalloproteinases

The astacins are a subfamily of the metzincin superfamily of metalloproteinases. The first to be characterized was the crayfish enzyme astacin. To date more than 200 members of this family have been identified in species ranging from bacteria to humans. Astacins are involved in developmental morphogenesis, matrix assembly, tissue differentiation and digestion. Family members include the procollagen C-proteinase (BMP1, bone morphogenetic protein 1), tolloid and mammalian tolloid-like, HMP (Hydra vulgaris metalloproteinase), sea urchin BP10 (blastula protein) and SPAN (Strongylocentrotus purpuratus astacin), the 'hatching' subfamily comprising alveolin, ovastacin, LCE, HCE ('low' and 'high' choriolytic enzymes), nephrosin (from carp head kidney), UVS.2 from frog, and the meprins. In the human and mouse genomes, there are six astacin family genes (two meprins, three BMP1/tolloid-like, one ovastacin), but in Caenorhabditis elegans there are 40. Meprins are the only astacin proteinases that function on the membrane and extracellularly by virtue of the fact that they can be membrane-bound or secreted. They are unique in their domain structure and covalent subunit dimerization, oligomerization propensities, and expression patterns. They are normally highly regulated at the transcriptional and post-translational levels, localize to specific membranes or extracellular spaces, and can hydrolyse biologically active peptides, cytokines, extracellular matrix (ECM) proteins and cell-surface proteins. The in vivo substrates of meprins are unknown, but the abundant expression of these proteinases in the epithelial cells of the intestine, kidney and skin provide clues to their functions.

Hydrolytic behaviour of mono-and dithiolato-bridged dinuclear arene ruthenium complexes and their interactions with biological ligands

The hydrolysis and the reactivity of two dinuclear p-cymene ruthenium monothiolato complexes, [(η6-p-MeC6H4Pri)2Ru2Cl2(µ-Cl)(µ-S-m-9-B10C2H11)] (1) and [(η6-p-MeC6H4Pri)2¬Ru2Cl2(µ-Cl)¬(µ-S¬CH2-p-C6H4-NO2)] (2), and of two dinuclear p-cymene ruthenium dithiolato complexes, [(η6-p-MeC6H4Pri)2Ru2(µ-SCH2CH2Ph)2Cl2] (3) and [(η6-p-Me¬C6H4¬Pri)2¬Ru2(S¬CH2¬C6H4-p-O¬Me)2¬Cl2] (4) towards amino acids, nucleotides, and a single-stranded DNA dodecamer were studied using NMR and mass spectrometry. In aqueous solutions at 37 °C, the monothiolato com¬plexes 1 and 2 undergo rapid hydrolysis, irrespective of the pH value, the predominant species in D2O/acetone-d6 solution at equilibrium being the neutral hydroxo complexes [(η6-p-Me¬C6H4¬Pri)2Ru2(OD)2(µ-OD)(µ-SR)]. The dithiolato complexes 3 and 4 are stable in water under acidic conditions, but undergo slow hydrolysis under neutral and basic conditions. In both cases, the cationic hydroxo complexes [(η6-p-MeC6H4Pri)2Ru2(µ-SR)2¬(OD)¬(CD3CN)]+ are the only spe¬cies observed in D2O/CD3CN at equilibrium. Surprisingly, no adducts are observed upon addition of an excess of L-methionine or L-histidine to the aqueous solutions of the complexes. Upon addition of an excess of L-cysteine, on the other hand, 1 and 2 form the unusual cationic trithiolato complexes [(η6-p-MeC6H4Pri)2¬Ru2{µ-SCH2CH(NH2)COOH}2(µ-SR)]+ containing two bridging cysteinato li¬gands, while 3 and 4 yield cationic trithiolato complexes [(η6-p-MeC6H4Pri)2Ru2[µ-SCH2CH¬(NH2)COOH](µ-SR)2]+ containing one bridging cysteinato ligand. A representative of catio¬nic trithiolato complexes containing a cysteinato bridge of this type, [(η6-p-MeC6H4Pri)2¬Ru2[µ-S¬CH2CH(NH2)COOH](µ-SCH2-p-C6H4-But)2]+ (6) could be synthesised from the di¬thiolato complex [(η6-p-Me¬C6H4¬Pri)2-Ru2(S¬CH2¬C6H4-p-But)2Cl2] (5), isolated as the tetra¬fluo¬ro¬borate salt and fully characterised. Moreover, the mono- and dithiolato complexes 1 - 4 are inert toward nucleotides and DNA, suggesting that DNA is not a target of cytotoxic thiolato-bridged arene ruthenium complexes. In contrast to the trithiolato complexes, monothiolato and dithio¬lato complexes hydrolyse and react with L-cysteine. These results may have im¬portant implications for the mode of action of thiolato-bridged dinuclear arene ruthenium drug candidates, and suggest that their modes of action are different to those of other arene ruthenium complexes.

Reactions of fac-[PtMe2(OMe)(H2O)3]+ with halide ions: effect of halide trans effect on methoxide hydrolysis

A solution of fac-[PtMe2(OMe)(H2O)(3)](+) (1) in aqueous perchloric acid underwent very slow hydrolysis of the Pt-OMe bond, over many, weeks. When chloride was added to a solution of 1, two interconverting isomers of [PtMe2(OMe)Cl(H2O)(2)] (with chloride trans to methyl) were formed, and with excess chloride, [PtMe2(OMe)Cl-2(H2O)](-) (both chloride ligands trans to methyl). This solution was stable at ambient temperature, but on heating, methanol was formed and [PtMe2Cl2(H2O)(2)] (both chloride ligands cis to methyl) was produced in the solution. It is proposed that this reaction proceeds via an intermediate complex with chloride bound trans to methoxide. Concentration gave solid [{PtMe2Cl2}n], whose identity was confirmed by conversion to [PtMe(2)Cl(2)py(2)] (pyridine, py, trans to methyl). With bromide and iodide, methoxide hydrolysis occurred at ambient temperature, more slowly with bromide than with iodide, to form solid [{PtMe2X2}(n)] without significant concentrations of [PtMe2X2(H2O)(2)] formed as an intermediate. The greater tendency for Pt-OMe bond to hydrolyse trans to halide compared with 1 was ascribed to the higher trans effect of the halide ligand compared with that of water. (C) 2003 Elsevier Science B.V. All rights reserved.

Combined bioreaction and separation in a simulated counter-current chromatographic bioreactor-separator system

The objective of this work has been to investigate the principle of combined bioreaction and separation in a simulated counter-current chromatographic bioreactor-separator system (SCCR-S). The SCCR-S system consisted of twelve 5.4cm i.d x 75cm long columns packed with calcium charged cross-linked polystyrene resin. Three bioreactions, namely the saccharification of modified starch to maltose and dextrin using the enzyme maltogenase, the hydrolysis of lactose to galactose and glucose in the presence of the enzyme lactase and the biosynthesis of dextran from sucrose using the enzyme dextransucrase. Combined bioreaction and separation has been successfully carried out in the SCCR-S system for the saccharification of modified starch to maltose and dextrin. The effects of the operating parameters (switch time, eluent flowrate, feed concentration and enzyme activity) on the performance of the SCCR-S system were investigated. By using an eluent of dilute enzyme solution, starch conversions of up to 60% were achieved using lower amounts of enzyme than the theoretical amount required by a conventional bioreactor to produce the same amount of maltose over the same time period. Comparing the SCCR-S system to a continuous annular chromatograph (CRAC) for the saccharification of modified starch showed that the SCCR-S system required only 34.6-47.3% of the amount of enzyme required by the CRAC. The SCCR-S system was operated in the batch and continuous modes as a bioreactor-separator for the hydrolysis of lactose to galactose and glucose. By operating the system in the continuous mode, the operating parameters were further investigated. During these experiments the eluent was deionised water and the enzyme was introduced into the system through the same port as the feed. The galactose produced was retarded and moved with the stationary phase to be purge as the galactose rich product (GalRP) while the glucose moved with the mobile phase and was collected as the glucose rich product (GRP). By operating at up to 30%w/v lactose feed concentrations, complete conversions were achieved using only 48% of the theoretical amount of enzyme required by a conventional bioreactor to hydrolyse the same amount of glucose over the same time period. The main operating parameters affecting the performance of the SCCR-S system operating in the batch mode were investigated and the results compared to those of the continuous operation of the SCCR-S system. . During the biosynthesis of dextran in the SCCR-S system, a method of on-line regeneration of the resin was required to operate the system continuously. Complete conversion was achieved at sucrose feed concentrations of 5%w/v with fructose rich. products (FRP) of up to 100% obtained. The dextran rich products were contaninated by small amounts of glucose and levan formed during the bioreaction. Mathematical modelling and computer simulation of the SCCR-S. system operating in the continuous mode for the hydrolysis of lactose has been carried out. .

Impact du métabolisme périphérique du mivacurium sur la modélisation pharmacocinétique et pharmacodynamique de l'effet myorelaxant chez la patient jeune et âgé

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Gradient artérioveineux et concentrations interstitielles des bloqueurs neuromusculaires au niveau du muscle : impact sur la modélisation pharmacocinétique-pharmacodynamique

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Impact du métabolisme périphérique du mivacurium sur la modélisation pharmacocinétique et pharmacodynamique de l'effet myorelaxant chez la patient jeune et âgé

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Gradient artérioveineux et concentrations interstitielles des bloqueurs neuromusculaires au niveau du muscle : impact sur la modélisation pharmacocinétique-pharmacodynamique

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Levier synthétique de silice : une approche pour fonctionnaliser les surfaces hydroxylées

La présente recherche couvre les premiers essais d’une nouvelle méthode de fonctionnalisation chimique de surfaces hydroxylées. La méthode consiste à faire réagir ladite surface avec un réactif en excès, le tétrachlorure de silicium (SiCl4), rendant celle-ci chimiquement réactive à n’importe quel alcool externe ajouté par la suite au milieu. L’alcool externe modifie les propriétés de surface du substrat dépendamment de sa composition. Une multitude de fonctionnalités chimiques peuvent être présentes sur l’alcool externe et ce sont elles qui dictent les nouvelles propriétés de surface. Dans l’étude présente, les substrats étudiés ont été la cellulose microcristalline commerciale (MCC), la fibre de chanvre délignifiée et la corde de lin. La MCC est une cellulose fortement hydrolysée et purifiée ayant une structure cristalline la rendant insoluble. L’absence d’impuretés pouvant engendrer des interférences est la raison majeure pour laquelle ce substrat a été employé en premier. Avec des alcools tels que le 1-décanol, le 10-undécènol et le PEG-400, les propriétés de surfaces ont été ajustées et ont permis les premières applications comme substrat fibreux dans des composites de LDPE et de PLA. Une fois modifiés avec le 1-décanol et le 10-undécènol, les substrats ont montré des propriétés surfaciques hydrophobes n’absorbant plus l’eau et montrant des angles de contacts supérieurs à 90o avec celle-ci. Des mélanges à 17 et à 50 % massiques de ces substrats modifiés ont donc été faits avec le LDPE et une caractérisation complète des composites a été effectuée. Les tests mécaniques des composites modifiés de 17 % massique de MCC et de corde ont démontré une claire adhésion substrat-matrice par l’augmentation de la contrainte maximale ainsi que de l’élongation à la rupture. Pour ce qui est des substrats avec PEG-400, la fonctionnalisation a été démontrée et des composites MCC-PLA ont été faits. La modification de la MCC a engendré un changement des propriétés mécaniques sans toutefois surpasser le PLA de départ. Néanmoins, dans tous les cas, l’adhésion substrat-matrice a été améliorée par la réaction et a pu être démontrée par l’étude des fractures et des coupes microtomes au MEB. Finalement, la dispersion et les interactions à l’intérieur des composites de MCC à 17 et à 50 % ont été observées par rhéologie. Les composites modifiés ont montré une meilleure dispersion comparativement aux composites de MCC qui eux engendrent même la formation de réseau substrat-substrat.

La modification chimique en surface de la cellulose microcristalline et son application dans les composites de polyéthylène

Dans le contexte de la production d’éthanol cellulosique, la cellulose doit être hydrolysée par voie chimique ou enzymatique. Dans ce procédé d’hydrolyse, la partie cristalline de la cellulose est plus difficilement fragmentable, ce qui entraîne des coûts supplémentaires dues au temps de traitement plus élevé ou à la quantité supplémentaire de produits chimiques nécessaires. Dans l’optique de réduire les coûts de l’hydrolyse tout en recherchant une voie pour valoriser la cellulose cristalline, l’idée de fabriquer des composites polymères/cellulose est attrayante. L’objectif du présent travail a donc été de valider si la cellulose microcristalline tirée d’un processus d’hydrolyse acide pourrait mener à de nouveaux matériaux composites à valeur ajoutée. Un obstacle anticipé dans le projet a été la faible adhésion de la cellulose, hydrophile et polaire, aux polymères généralement beaucoup moins polaires. Le développement de composites performants et l’atteinte de teneurs élevés en cellulose microcristalline a donc inclus, sur le plan chimique, l’objectif de comparer divers traitements de surface de la cellulose qui permettrait de pallier aux défis anticipés. La méthodologie utilisée dans ce projet a consisté à développer et optimiser un protocole de modification chimique sur de la cellulose microcristalline commerciale à l’échelle laboratoire. Les celluloses modifiées ont été soumises à une caractérisation par analyse de l’angle de contact pour caractériser l’hydrophobicité des fibres, par spectrométrie photoélectronique X pour l’analyse de la composition chimique des fibres, par granulométrie laser pour mesurer la longueur des différentes fibres et microscopie optique pour l’observation de la longueur des fibres. Toutes les techniques ont été utilisées afin de comparer les propriétés des celluloses modifiées à celles de la cellulose de référence. La cellulose de référence et les celluloses modifiées chimiquement ont ensuite été mélangées à des concentrations de 0 à 50% avec du polyéthylène de basse densité à l’état fondu en utilisant un mélangeur interne de type Brabender®. Les composites ont été caractérisés par microscopie électronique à balayage pour analyser la morphologie de mélange sur les surfaces de rupture et l’homogénéité du mélange, par des analyses rhéologiques afin d’obtenir la viscosité en fonction du cisaillement et par des essais de traction afin de déterminer leur Module de Young, leur résistance à la traction et leur élongation à la rupture. Ces caractéristiques permettent de prévoir la performance des composites dans des applications structurales.

Formation de centres quaternaires entièrement carbonés et dérivations d’ions iminiums encombrés

Le projet présenté au cours de cette thèse porte sur la formation de centres quaternaires entièrement carbonés. Plusieurs axes d’approche ont été établis, et seront présentés par chapitre : le premier fait état de l’utilisation d’une réaction de Vilsmeier-Haack, le second rapporte la fabrication de nouveaux catalyseurs pour la réaction de condensation de Claisen et le dernier utilise la réaction de Vilsmeier-Haack pour la formation d’acides [béta]-aminés non-racémiques. Lors du premier chapitre, le sujet abordé sera l’utilisation de la réaction de Vilsmeier-Haack pour la formation de composés 1,3-dicarbonylés contenant un centre quaternaire entièrement carboné. D’abord nous verrons comment, théoriquement, la chiralité du centre quaternaire peut être contrôlée par l’utilisation d’amines chirales. Puis nous suivrons le développement d’une méthode d’hydrolyse spécifique à l’obtention de composés 1,3-dicarbonylés avec ses forces et ses limites. La deuxième partie de cette thèse portera sur le développement de nouveaux catalyseurs pour la réaction de condensation de Claisen. Plusieurs avenues seront exposées. Dans un premier temps, nous verrons la rationalisation validant chacune des idées d’avenues envisagées, puis nous aborderons les méthodes de synthèses essayées pour les catalyseurs imaginés dans chacune de ces avenues. Le dernier chapitre portera sur la formation de dérivés d’acides [béta]-aminés non-racémiques via l’utilisation d’une réaction de Vilsmeier-Haack. Dans un premier temps, différentes méthodes de réduction applicables à cette réaction seront présentées, et ensuite, le concept d’un nouveau groupe protecteur spécifique aux ions iminiums sera démontré.

In vitro studies of drug transformations: application to forensic toxicology

The forensic toxicologist faces challenges in the detection of drugs and poisons in biological samples due to transformations which occur both during life and after death. For example, changes can result from drug metabolism during life or from the use of formalin solution for post mortem embalming purposes. The former requires the identification of drug metabolites and the latter the identification of chemical reaction products in order to know which substances had been administered. The work described in this thesis was aimed at providing ways of tackling these challenges and was divided into two parts. Part 1 investigated the use of in vitro drug metabolism by human liver microsomes (HLM) to obtain information on drug metabolites and Part 2 investigated the chemical reactions of drugs and a carbamate pesticide with formalin solution and formalin-blood. The initial aim of part I was to develop an in vitro metabolism method using HLM, based on a literature review of previous studies of this type. MDMA was chosen as a model compound to develop the HLM method because its metabolism was known and standards of its metabolites were commercially available. In addition, a sensitive and selective method was developed for the identification and quantitation of hydrophilic phase I drug metabolites using LC/MS/MS with a conventional reverse-phase (C18) column. In order to obtain suitable retention factors for polar drug metabolites on this column, acetyl derivatives were evaluated for converting the metabolites to more lipophilic compounds and an optimal separation system was developed. Acetate derivatives were found to be stable in the HPLC mobile phase and to provide good chromatographic separation of the target analytes. In vitro metabolism of MDMA and, subsequently, of other drugs involved incubation of 4 µg drug substance in pH 7.4 buffer with an NADPH generating system (NGS) at 37oC for 90 min with addition of more NGS after 30 min. The reaction was stopped at 90 min by the addition of acetonitrile before extraction of the metabolites. Acetate derivatives of MDMA metabolites were identified by LC/MS/MS using multiple reaction monitoring (MRM). Three phase I metabolites (both major and minor metabolites) of MDMA were detected in HLM samples. 3,4-dihydroxy-methamphetamine and 4-hydroxy-3-methoxymethamphetamine were found to be major metabolites of MDMA whereas 3,4-methylenedioxyamphetamine was found to be a minor metabolite. Subsequently, ten MDMA positive urines were analysed to compare the metabolite patterns with those produced by HLM. An LC/MS method for MDMA and its metabolites in urine samples was developed and validated. The method demonstrated good linearity, accuracy and precision and insignificant matrix effects, with limits of quantitation of 0.025 µg/ml. Moreover, derivatives of MDMA and its metabolites were quantified in all 10 positive human urine samples. The urine metabolite pattern was found to be similar to that from HLM. The second aim of Part 1 was to use the HLM system to study the metabolism of some new psychoactive substances, whose misuse worldwide has necessitated the development of analytical methods for these drugs in biological specimens. Methylone and butylone were selected as representative cathinones and para-methoxyamphetamine (PMA) was chosen as a representative ring-substituted amphetamine, because of the involvement of these drugs in recent drug-related deaths, because of a relative lack of information on their metabolism, and because reference standards of their metabolites were not commercially available. An LC/MS/MS method for the analysis of methylone, butylone, PMA and their metabolites was developed. Three phase I metabolites of methylone and butylone were detected in HLM samples. Ketone reduction to β-OH metabolites and demethylenation to dihydroxy-metabolites were found to be major phase I metabolic pathways of butylone and methylone whereas N-demethylation to nor-methylone and nor-butylone were found to be minor pathways. Also, demethylation to para-hydroxyamphetamine was found to be a major phase I metabolic pathway of PMA whereas β-hydroxylation to β-OH-PMA was found to be a minor pathway. Formaldehyde is used for embalming, to reduce decomposition and preserve cadavers, especially in tropical countries such as Thailand. Drugs present in the body can be exposed to formaldehyde resulting in decreasing concentrations of the original compounds and production of new substances. The aim of part II of the study was to evaluate the in vitro reactions of formaldehyde with selected drug groups including amphetamines (amphetamine, methamphetamine and MDMA), benzodiazepines (alprazolam and diazepam), opiates (morphine, hydromorphone, codeine and hydrocodone) and with a carbamate insecticide (carbosulfan). The study would identify degradation products to serve as markers for the parent compounds when these were no longer detectable. Drugs standards were spiked in 10% formalin solution and 10% formalin blood. Water and whole blood without formalin were used for controls. Samples were analysed by LC/MS/MS at different times from the start, over periods of up to 30 days. Amphetamine, methamphetamine and MDMA were found to rapidly convert to methamphetamine, DMA and MDDMA respectively, in both formalin solution and formalin blood, confirming the Eschweiler-Clarke reaction between amine-containing compounds and formaldehyde. Alprazolam was found to be unstable whereas diazepam was found to be stable in both formalin solution and water. Both were found to hydrolyse in formalin solution and to give open-ring alprazolam and open-ring diazepam. Other alprazolam conversion products attached to paraformaldehyde were detected in both formalin solution and formalin blood. Morphine and codeine were found to be more stable than hydromorphone and hydrocodone in formalin solution. Conversion products of hydromorphone and hydrocodone attached to paraformaldehyde were tentatively identified in formalin solution. Moreover, hydrocodone and hydromorphone rapidly decreased within 24 h in formalin blood and could not be detected after 7 days. Carbosulfan was found to be unstable in formalin solution and was rapidly hydrolysed within 24 h, whereas in water it was stable up to 48 h. Carbofuran was the major degradation product, plus smaller amounts of other products, 3-ketocarbofuran and 3-hydrocarbofuran. By contrast, carbosulfan slowly hydrolysed in formalin-blood and was still detected after 15 days. It was concluded that HLM provide a useful tool for human drug metabolism studies when ethical considerations preclude their controlled administration to humans. The use of chemical derivatisation for hydrophilic compounds such as polar drug metabolites for analysis by LC/MS/MS with a conventional C18 column is effective and inexpensive, and suitable for routine use in the identification and quantitation of drugs and their metabolites. The detection of parent drugs and their metabolites or conversion and decomposition products is potentially very useful for the interpretation of cases in forensic toxicology, especially when the original compounds cannot be observed.

Stimulation of bacterial exoproteolytic activity by fish farming in coastal marine ponds: Effect on dissolved protein cycling

The effect of fish farming on dissolved amino acid concentrations, bacterioplankton abundance and exoproteolytic activity was assessed in 3 experimental marine ponds. Different standing stocks of fish were introduced (semi-intensive pond: 250 g.m(-2); semi-extensive pond: 50 g.m(-2) control pond: 0). Sea bass farming increased dissolved combined amino acid (DCAA) concentrations only in the semi-intensive pond. Bacterial standing stock was unaffected by fish food supply. However, bacterial exoproteolytic activity was strongly stimulated by aquaculture intensification; the average maximal rate of dissolved protein hydrolysis (V-m) increased with intensity (control pond: 1 500 nM.h(-1); semi-extensive pond: 2 600 nM.h(-1) semi-intensive pond: 5 100 nM.h(-1)). DCAA fluxes through bacterial exoproteolytic activity ranged between 16 (semi-extensive) and 11% (semi-intensive) of the daily nitrogen input by fish food. Bacterial exoproteolytic activity allowed a substantial part of the increased supply of dissolved amino nitrogen to be incorporated into bacterial biomass, then available for transfer to higher trophic levels within the ponds. It also significantly decreased dissolved organic nitrogen export from the ponds to the surrounding environment.