Road Safety Audit for Intersection of IA 1 and County Road R-67 in Johnson County, Iowa, 2009

On August 3, 2009, a road safety audit was initiated for the intersection of IA 1 and County Road F-67 in Johnson County, Iowa. Due to the high volume of traffic accessing the cheese producing plant (Twin County Dairy, Inc.), a grocery store east of the intersection, and a large Amish community with horse-drawn wagons and carriages frequently sharing the roads with motorized vehicles, this intersection has developed a crash history that concerns the Iowa Department of Transportation (Iowa DOT), Iowa State Patrol, and local agencies. Considering this, Johnson County and the Iowa DOT requested that a road safety audit be conducted to address the safety concerns and recommend possible mitigation strategies.

Operative Treatment of Ovarian Cancer and Borderline Tumors in Different Hospital Categories in Finland

Surgery is the cornerstone of ovarian cancer treatment and maximal cytoreduction is important. In the early 1980’s primary surgical treatment of ovarian cancer was performed in over 80 hospitals in Finland. The significance of the operative volume of the hospital, of the training of the surgeons and of centralization of surgical treatment has been widely discussed. The aim of the present study was to evaluate the outcome of surgical treatment of ovarian cancer in different hospital categories retrospectively and prospectively, and to analyze if any differences are reflected in survival. The retrospective study included 3851 ovarian cancer patients operated between 1983 and 1994 in Finland. The data was analyzed according to hospital category (university, central, and other) and by quartiles of the hospital operative volume. The results showed that patients operated in the highest operative volume hospitals had the best relative survival. When stratifying the analysis by the period of diagnosis (1983-1988 and 1989-1994), the university hospitals improved their performance the most. The prospective part of the thesis was initiated in 1999 and included 307 patients with invasive ovarian cancer and 65 patients with an ovarian borderline tumor. The baseline and 5-year surveys used a questionnaire that was filled in by the operating surgeons. For analysis of the 5-year followup data, the hospitals were divided into three categories (<10, 10-20, or >20 patients operated in 1999). The effect of the surgical volume was analyzed also as a continuous variable (1-47 operations per year). In university hospitals, pelvic lymphadenectomy was performed in 88 %, and para-aortic lymphadenectomy in 73 %, of the patients with stage I disease. The corresponding figures ranged from 11 % to 21 % in the other hospitals. For stage III ovarian cancer patients operated by gynecological oncologists, the estimated odds ratio for no macroscopic residual tumor was 3.0 times higher (95 % CI 1.2-7.5) than for those operated by general gynecologists. In the university and other hospitals 82% of the patients received platinum-based chemotherapy. Platinum + taxane combination was given to 63 % of the patients in the university and in 49 % in the other hospitals (p = 0.0763). Only a minority of the patients with tumors of borderline malignancy were staged according to recommendations, most often multiple peritoneal biopsies and omentectomy were neglected. FIGO stage, patient age, and residual tumor were independent prognostic factors of cancer-specific 5-year survival. A higher hospital operative volume was also a significant prognostic factor for better cancer-specific survival (p = 0.036) and disease-free survival (p = 0.048). In conclusion, ovarian cancer patients operated in high-volume university hospitals were more often optimally debulked and had a significantly better cancer-specific survival than patients operated in other hospitals. These results favor centralization of primary surgical treatment of ovarian cancer.

Experimental and Numerical Analysis of Different Volutes in a Centrifugal Compressor

In a centrifugal compressor the flow around the diffuser is collected and led to the pipe system by a spiral-shaped volute. In this study a single-stage centrifugal compressor with three different volutes is investigated. The compressorwas first equipped with the original volute, the cross-section of which was a combination of a rectangle and semi-circle. Next a new volute with a fully circular cross-section was designed and manufactured. Finally, the circular volute wasmodified by rounding the tongue and smoothing the tongue area. The overall performance of the compressor as well as the static pressure distribution after the impeller and on the volute surface were measured. The flow entering the volute was measured using a three-hole Cobra-probe, and flow visualisations were carriedout in the exit cone of the volute. In addition, the radial force acting on theimpeller was measured using magnetic bearings. The complete compressor with thecircular volute (inlet pipe, full impeller, diffuser, volute and outlet pipe) was also modelled using computational fluid dynamics (CFD). A fully 3-D viscous flow was solved using a Navier-Stokes solver, Finflo, developed at Helsinki University of Technology. Chien's k-e model was used to take account of the turbulence. The differences observed in the performance of the different volutes were quite small. The biggest differences were at low speeds and high volume flows,i.e. when the flow entered the volute most radially. In this operating regime the efficiency of the compressor with the modified circular volute was about two percentage points higher than with the other volutes. Also, according to the Cobra-probe measurements and flow visualisations, the modified circular volute performed better than the other volutes in this operating area. The circumferential static pressure distribution in the volute showed increases at low flow, constant distribution at the design flow and decrease at high flow. The non-uniform static pressure distribution of the volute was transmitted backwards across the vaneless diffuser and observed at the impeller exit. At low volume flow a strong two-wave pattern developed into the static pressure distribution at the impeller exit due to the response of the impeller to the non-uniformity of pressure. The radial force of the impeller was the greatest at the choke limit, the smallest atthe design flow, and moderate at low flow. At low flow the force increase was quite mild, whereas the increase at high flow was rapid. Thus, the non-uniformityof pressure and the force related to it are strong especially at high flow. Theforce caused by the modified circular volute was weaker at choke and more symmetric as a function of the volume flow than the force caused by the other volutes.

Teholähdesuunnittelu

Työssä vertaillaan massatuotannon näkökulmasta eri tehoalueille sopivia teholähteen toteuttamisvaihtoehtoja. Lisäksi esitellään standardien asettamia vaatimuksia teholähteille. Työssä käsitellään teholähdesuunnittelun eri osa-alueita ja niihin sopivien simulointityökalujen hyödyntämismahdollisuuksia suunnitteluprosessin osana. Simulointituloksia ja teoreettisia laskelmia vertaillaan prototyypistä suoritettuihin mittauksiin.

Supplier's position in project marketing networks

The present study explores relationships between project marketers and their customers in project marketing context. The purpose of the study is to increase the understanding on supplier’s position in project marketing networks. Project marketing is representing a high volume in the international business, and the industrial network approach and the project marketing research cannot fully explain a supplier’s position in project marketing networks. Increased knowledge on project networks can also contribute to industrial marketing research more generally. Data for the present study was collected firstly during the pilot case study from project buyers in the paper and the steel industry in interviews. Secondly an entire project marketing case concerning a steel industry case was used as a data source. The data included interviews, correspondence between the supplier and the buyer, and project documents. The data of the pilot case was analysed with contents analysis, and in the case a deeper analysis based on the developed Stage Dimension framework was used. Supplier’s position in project marketing networks is a hierarchical and dynamic concept including a supplier’s position on the highest level. The dimensions of the position concept are the intermediate level, and the dimensions are based on the underlying components. Supplier’s position is composed from four organization related dimensions, and two individual actor related dimensions. The composition of the supplier’s position varies during the project marketing process, and consequently the relative importance of the dimensions is changing over the process. Supplier’s position in project marketing networks is shaped by incremental and radical changes. Radical changes are initiated by critical events. The study contributes to the research of industrial networks and project marketing. The theoretical contribution of the study is threefold: firstly it proposes a structure of the position concept in project marketing networks, secondly it proposes the Position Stage Dimension Component (PSDC) model for the development of supplier’s position during the project marketing process, and thirdly the study widens the critical event concept to cover the project marketing process both on the organizational and individual level. In addition to the theoretical contributions there are several managerial implications for planning and implementing marketing strategies in the project context.

The Pursuit of Efficient Copyright Licensing : How Some Rights Reserved Attempts to Solve the Problems of All Rights Reserved

This dissertation analyses the growing pool of copyrighted works, which are offered to the public using Creative Commons licensing. The study consist of analysis of the novel licensing system, the licensors, and the changes of the "all rights reserved" —paradigm of copyright law. Copyright law reserves all rights to the creator until seventy years have passed since her demise. Many claim that this endangers communal interests. Quite often the creators are willing to release some rights. This, however, is very difficult to do and needs help of specialized lawyers. The study finds that the innovative Creative Commons licensing scheme is well suited for low value - high volume licensing. It helps to reduce transaction costs on several le¬vels. However, CC licensing is not a "silver bullet". Privacy, moral rights, the problems of license interpretation and license compatibility with other open licenses and collecting societies remain unsolved. The study consists of seven chapters. The first chapter introduces the research topic and research questions. The second and third chapters inspect the Creative Commons licensing scheme's technical, economic and legal aspects. The fourth and fifth chapters examine the incentives of the licensors who use open licenses and describe certain open business models. The sixth chapter studies the role of collecting societies and whether two institutions, Creative Commons and collecting societies can coexist. The final chapter summarizes the findings. The dissertation contributes to the existing literature in several ways. There is a wide range of prior research on open source licensing. However, there is an urgent need for an extensive study of the Creative Commons licensing and its actual and potential impact on the creative ecosystem.

Transforming Maritime Safety Culture. Evaluation of the impacts of the ISM Code on maritime safety culture in Finland

The purpose of the METKU Project (Development of Maritime Safety Culture) is to study how the ISM Code has influenced the safety culture in the maritime industry. This literature review is written as a part of the Work Package 2 which is conducted by the University of Turku, Centre for Maritime Studies. The maritime traffic is rapidly growing in the Baltic Sea which leads to a growing risk of maritime accidents. Particularly in the Gulf of Finland, the high volume of traffic causes a high risk of maritime accidents. The growing risks give us good reasons for implementing the research project concerning maritime safety and the effectiveness of the safety measures, such as the safety management systems. In order to reduce maritime safety risks, the safety management systems should be further developed. The METKU Project has been launched to examine the improvements which can be done to the safety management systems. Human errors are considered as the most important reason for maritime accidents. The international safety management code (the ISM Code) has been established to cut down the occurrence of human errors by creating a safety-oriented organizational culture for the maritime industry. The ISM Code requires that a company should provide safe practices in ship operation and a safe working environment and establish safeguards against all identified risk. The fundamental idea of the ISM Code is that companies should continuously improve safety. The commitment of the top management is essential for implementing a safety-oriented culture in a company. The ISM Code has brought a significant contribution to the progress of maritime safety in recent years. Shipping companies and ships’ crews are more environmentally friendly and more safety-oriented than 12 years ago. This has been showed by several studies which have been analysed for this literature research. Nevertheless, the direct effect and influence of the ISM Code on maritime safety could not be isolated very well. No quantitative measurement (statistics/hard data) could be found in order to present the impacts of the ISM Code on maritime safety. In this study it has been discovered that safety culture has emerged and it is developing in the maritime industry. Even though the roots of the safety culture have been established there are still serious barriers to the breakthrough of the safety management. These barriers could be envisaged as cultural factors preventing the safety process. Even though the ISM Code has been effective over a decade, the old-established behaviour which is based on the old day’s maritime culture still occurs. In the next phase of this research project, these cultural factors shall be analysed in regard to the present safety culture of the maritime industry in Finland.

Estudo das partículas totais em suspensão e metais associados em áreas urbanas

This work aims at the study of the air quality determination regarding the total suspended particles (TSP) and the associated metals in the counties of Charqueadas and Sapucaia do Sul at the state of Rio Grande do Sul. The TSP samples were collected using high volume samplers and the analysis of the metallic elements was accomplished through ICP-AES. The results revealed that the TSP concentrations, found in the two studied regions, have exceded the current air quality patterns established by the Brazilian Legislation. They also revealed high levels of several of the elements being attributed to the presence of anthropogenic sources. The correlation between meteorological data (speed and wind direction) and TSP concentrations were significant and revealed strong influence in particle dispersion.

Análises seqüenciais de agrupamentos aplicadas ao estudo de partículas atmosféricas

The present paper has as objective to apply a sequential Cluster Analysis to the atmospheric particles: Hierarchical Cluster Analysis followed by Nonhierarchical Cluster Analysis. The hierarchical cluster analysis results were used as start point for the nonhierarchical cluster analysis as an agglomerative technique. These particles were taken from two areas of the metropolitan region of Porto Alegre, Charqueadas and Sapucaia do Sul., from may /97 to may/98, using a High Volume Sampler (Hi-Vol). Around 10,000 particles were analysed by Scanning Electron Microscope with Energy-Dispersive X-Ray microanalysis (SEM-EDS). The Hierarchical Cluster Analysis allowed the identification of five groups of particles, whose amounts were differentiated according to the summer and the winter campaigns. The abundance of each type of particles inside each group according to the different sections was verified by the Nonhierarchical Cluster Analysis, resulting in information about the emissions sources. The groups of particles of Si/Al and Si and of Fe/Zn and Fe for Charqueadas were more significant in section 2 and 3 (NW and W wind directions) and in section 1 (SE wind direction), evidencing the influence of the coal power plant and steel industry, respectively located in these quadrants. In Sapucaia do Sul the data were more heterogeneous, causing a certain difficulty to identify the source as anthropogenic. Nevertheless the group of particles containing Fe was found in sectors of NW/W wind directions which shows the influence of the steel plant.

Effects of Surface Properties and Wood Modification into Direct Printing on Wood

Building industry is a high volume branch which could provide prominent markets for wood based interior decoration solutions. Competition in interior decoration markets requires versatility in appearance. Versatility in wood appearance and added value could be achieved by printing grain patterns of different species or images directly onto wood. The problem when planning wood printing’s implementing into durable applications is basically how to transfer a high quality image or print sustainably onto wood, which is porous, heterogeneous, dimensionally unstable, non-white and rough. Wood preservation or treating, and modification can provide durability against degradation but also effect to the surface properties of wood which will effect on printability. Optimal adhesion is essential into print quality, as too high ink absorbance can cause spreading and too low ink absorbance cause pale prints. Different printing techniques have different requirements on materials and production. The direct printing on wood means, that intermedias are not used. Printing techniques with flexible printing plates or in fact non-impact techniques provide the best basis for wood printing. Inkjet printing of wood with different mechanical or chemical surface treatments, and wood plastic composite material gave good results that encourage further studies of the subject. Sanding the wood surface anti-parallel to the grain gave the best overall printing quality. Spreading parallel to the grain could not be avoided totally, except in cases where wood was treated hydrophobic so adhesion of the ink was not sufficient. Grain pattern of the underlying wood stays clearly visible in the printed images. Further studies should be made to fine tune the methods that already gave good results. Also effects of moisture content of wood, different inks, and long-term exposure to UV-radiation should be tested.

Robottisolun servotekniikan kehittäminen

Työn kehityksen kohteena toimii CIRB 500i –robottisolu, jonka sisällä työskentelee korkeaan tuotantokapasiteettiin kehitetty näköjärjestelmällä ohjattu sähköservomanipulaattori. Kokonaisuutena ajatellen työ tekee servotekniikan osalta poikkileikkauksen CIRB 500i –robottisolun matkasta prototyypistä tuotteeksi erilaisine kehitysvaiheineen. Työn alkutaipaleella perehdytään pitkälle pelkkään teoriaan nojautuen mitä on servotekniikka, miten se toimii ja kuinka se viritetään. Tämän jälkeen edellä opitut teoriat konkretisoidaan CIRB 500i –robottisoluun ja siinä käytettävään servotekniikkaan. Robottisolun komponenttien ja laitteistojen tullessa tutuiksi mietitään ja kehitetään kuinka robottisolusta saataisiin entistä kehittyneempi ja käytännöllisempi teknillisestä näkökulmasta katsoen kuitenkaan valmistamisen kustannustehokkuutta unohtamatta. Loppupuolella analysoidaan miten edellä tehdyt kehitystoimenpiteet ovat vaikuttaneet robottisolun toimintaan ja valmistamiseen. Lopuksi sovelletaan teoriaosuuden virityskeinoja servojen virittämiseen käytännössä ja analysoidaan saavutettuja kehittämistyön tuloksia. Lisäksi tehdään katsaus CIRB 500i –robottisolun tulevaisuuden näkymiin.

Salivary gland cancer in Finland: Incidence, histological distribution, outcome and prognostic factors

Salivary gland cancer (SGC) is a rare cancer. The histological classification of SGC is complex and its biological behavior highly variable: it may vary from a low-grade tumor to a high-grade and often fatal malignancy. These circumstances make this cancer a diagnostic and therapeutic challenge. Older age and exposure to ionizing radiation are known risk factors. The mainstay of treatment is surgery combined with adjuvant radiation therapy, when appropriate. In addition to the histological type, the only well known prognostic factor is the TNM classification, which describes the tumor size and the amount of metastases. This study was performed using a full population-based nationwide cohort of SGC patients and tumors diagnosed in Finland in 1991-1996. The annual incidence of SGC in the entire population was, on average, 47.7 per year. By histological re-evaluation of 237 specimens the most frequent histological types were the adenoid cystic carcinoma (n=65; 27%), the mucoepidermoid carcinoma (n=45; 19%) and the acinic cell carcinoma (n=41; 17%). The highest 10-year disease-specific survival rate occurred among patients with acinic cell carcinoma (90%), followed by mucoepidermoid carcinoma (81%) and adenoid cystic carcinoma (60%). A high volume-corrected index (VCI) of Ki-67 correlated with worse survival of patients with SGC. Computer-assisted morphometric analyses of CD34-positive vessels indicated an unfavorable prognosis for patients with mucoepidermoid carcinoma and an association with poor survival among patients with acinic cell carcinoma. A high level of expression of matrix metalloproteinase-9 (MMP-9) showed a trend for a poorer prognosis in salivary duct carcinoma, and a high level of MMP-13 and a low level of MMP-1 had a trend for a poorer prognosis of patients with SGC. A low level of MMP-7 was associated with a poor prognosis of patients with acinic cell and mucoepidermoid carcinoma.

Improvement of Surface Strength of Paper

Offset printing is a popular printing method that is especially suitable for large and fast print jobs. Newspapers, magazines and books are typical examples of products printed with offset method. In high volume printing production high efficiency is essential. Offset printing uses tacky inks that cause serious stress to the paper surface. Dusting and linting are terms that describe how loose and weakly bonded particles are removed from the paper surface in the printing process. The removed particles accumulate in the process causing deteriorating print quality. This forces the printing operators to stop production for washing and cleaning. Time and money are lost. Dusting and linting tendency of paper can be decreased by improving the surface strength of paper. In the present work a method to increase the surface strength of paper was studied. In the literature part offset printing method and challenges related to offset printing are presented. A review of new methods for surface sizing of paper is also presented. The experimental part presents trials where an apparatus for improving paper surface strength was tested and developed in mill scale. Laboratory work supporting the actual mill scale operations is also presented. The acquired results provide a solid base of information to make decisions on how to proceed with research in the present field of study.

Survey of transportation of liquid bulk chemicals in the Baltic Sea

This study is made as a part of the Chembaltic (Risks of Maritime Transportation of Chemicals in Baltic Sea) project which gathers information on the chemicals transported in the Baltic Sea. The purpose of this study is to provide an overview of handling volumes of liquid bulk chemicals (including liquefied gases) in the Baltic Sea ports and to find out what the most transported liquid bulk chemicals in the Baltic Sea are. Oil and oil products are also viewed in this study but only in a general level. Oils and oil products may also include chemical-related substances (e.g. certain bio-fuels which belong to MARPOL annex II category) in some cargo statistics. Chemicals in packaged form are excluded from the study. Most of the facts about the transport volumes of chemicals presented in this study are based on secondary written sources of Scandinavian, Russian, Baltic and international origin. Furthermore, statistical sources, academic journals, periodicals, newspapers and in later years also different homepages on the Internet have been used as sources of information. Chemical handling volumes in Finnish ports were examined in more detail by using a nationwide vessel traffic system called PortNet. Many previous studies have shown that the Baltic Sea ports are annually handling more than 11 million tonnes of liquid chemicals transported in bulk. Based on this study, it appears that the number may be even higher. The liquid bulk chemicals account for approximately 4 % of the total amount of liquid bulk cargoes handled in the Baltic Sea ports. Most of the liquid bulk chemicals are handled in Finnish and Swedish ports and their proportion of all liquid chemicals handled in the Baltic Sea is altogether over 50 %. The most handled chemicals in the Baltic Sea ports are methanol, sodium hydroxide solution, ammonia, sulphuric and phosphoric acid, pentanes, aromatic free solvents, xylenes, methyl tert-butyl ether (MTBE) and ethanol and ethanol solutions. All of these chemicals are handled at least hundred thousand tonnes or some of them even over 1 million tonnes per year, but since chemical-specific data from all the Baltic Sea countries is not available, the exact tonnages could not be calculated in this study. In addition to these above-mentioned chemicals, there are also other high volume chemicals handled in the Baltic Sea ports (e.g. ethylene, propane and butane) but exact tonnes are missing. Furthermore, high amounts of liquid fertilisers, such as solution of urea and ammonium nitrate in water, are transported in the Baltic Sea. The results of the study can be considered indicative. Updated information about transported chemicals in the Baltic Sea is the first step in the risk assessment of the chemicals. The chemical-specific transportation data help to target hazard or e.g. grounding/collision risk evaluations to chemicals that are handled most or have significant environmental hazard potential. Data gathered in this study will be used as background information in later stages of the Chembaltic project when the risks of the chemicals transported in the Baltic Sea are assessed to highlight the chemicals that require special attention from an environmental point of view in potential marine accident situations in the Baltic Sea area.

Postprandial symptoms in dysmotility-like functional dyspepsia are not related to disturbances of gastric myoelectrical activity

Gastric dysrhythmias, such as tachy- or bradygastria, have been reported in patients with functional dyspepsia (FD), but their role in symptom production is uncertain. It is also not known whether gastric dysrhythmias in these patients can be elicited by physiological gastric distension with a meal. We investigated the relationships between symptoms after ingestion of different volumes of water following a test meal and gastric dysrhythmias in FD patients. Fourteen patients with dysmotility-like FD and 13 healthy volunteers underwent paired electrogastrography (EGG) studies. Fasted subjects ingested 150 ml of yoghurt with either 150 ml (low volume) or 300 ml (high volume) water in random order. Fasting and fed EGGs with monitoring of symptoms were performed in both studies. Ten FD patients (71.4%) reported upper abdominal discomfort and bloating after the low volume meal, but only one (7.1%) presented an abnormal EGG (dominant frequency in the 2-4-cpm range: 58%). Following the high volume meal, 7 patients (50%) had symptoms, but none had EGG abnormalities. No significant differences were found between FD patients and controls for any of the EGG variables, in any test. In FD patients with postprandial symptoms, the percentage of the EGG dominant frequency in the normal range (median, 84.6%; range, 76.0-100.0%) was similar (P > 0.20) to that in those without symptoms (88.5%; 75.0-100.0%). We conclude that disturbances of gastric myoelectrical activity are unlikely to play a role in the origin of postprandial upper abdominal discomfort and bloating in dysmotility-like FD.