Safety function analysis in an industrial production process

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

Predictive analytical and numerical modeling for orthogonal cutting

In this thesis, a predictive analytical and numerical modeling approach for the orthogonal cutting process is proposed to calculate temperature distributions and subsequently, forces and stress distributions. The models proposed include a constitutive model for the material being cut based on the work of Weber, a model for the shear plane based on Merchants model, a model describing the contribution of friction based on Zorev’s approach, a model for the effect of wear on the tool based on the work of Waldorf, and a thermal model based on the works of Komanduri and Hou, with a fraction heat partition for a non-uniform distribution of the heat in the interfaces, but extended to encompass a set of contributions to the global temperature rise of chip, tool and work piece. The models proposed in this work, try to avoid from experimental based values or expressions, and simplifying assumptions or suppositions, as much as possible. On a thermo-physical point of view, the results were affected not only by the mechanical or cutting parameters chosen, but also by their coupling effects, instead of the simplifying way of modeling which is to contemplate only the direct effect of the variation of a parameter. The implementation of these models was performed using the MATLAB environment. Since it was possible to find in the literature all the parameters for AISI 1045 and AISI O2, these materials were used to run the simulations in order to avoid arbitrary assumption.

Closed hybrid hierarchical reservoirs based on the deconstruction of the cellular native microenvironment

The stem cell niche organization and dynamics provide valuable cues for the development of mimetic environments that could have potential to stimulate the regenerative process. We propose the use of biodegradable biomaterials to produce closed miniaturised structures able to encapsulate different cell types or bioactive molecules. In particular, capsules are fabricated using the so-called layer-by-layer technology, where the consecutive (nano-sized) layers are well stabilized by electrostatic interactions or other weak forces. Using alginate-based spherical templates containing cells or other elements (e.g. proteins, magnetic nanoparticles, microparticles) it is possible to produce liquefied capsules that may entrap the entire cargo under mild conditions. The inclusion of liquefied micropcapsules may be used to produce hierarchical compartmentalised systems for the delivery of bioactive agents. The presence of solid microparticles inside such capsules offers adequate surface area for adherent cell attachment increasing the biological performance of these hierarchical systems, while maintain both permeability and injectability. We demonstrated that the encapsulation of distinct cell types (including mesenchymal stem cells and endothelial cells) enhances the osteogenic capability of this system, that could be useful in bone tissue engineering applications.

New perspectives in the use of ink evidence in forensic science: Part I. Development of a quality assurance process for forensic ink analysis by HPTLC

The level of information provided by ink evidence to the criminal and civil justice system is limited. The limitations arise from the weakness of the interpretative framework currently used, as proposed in the ASTM 1422-05 and 1789-04 on ink analysis. It is proposed to use the likelihood ratio from the Bayes theorem to interpret ink evidence. Unfortunately, when considering the analytical practices, as defined in the ASTM standards on ink analysis, it appears that current ink analytical practices do not allow for the level of reproducibility and accuracy required by a probabilistic framework. Such framework relies on the evaluation of the statistics of the ink characteristics using an ink reference database and the objective measurement of similarities between ink samples. A complete research programme was designed to (a) develop a standard methodology for analysing ink samples in a more reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in a forensic context. This report focuses on the first of the three stages. A calibration process, based on a standard dye ladder, is proposed to improve the reproducibility of ink analysis by HPTLC, when these inks are analysed at different times and/or by different examiners. The impact of this process on the variability between the repetitive analyses of ink samples in various conditions is studied. The results show significant improvements in the reproducibility of ink analysis compared to traditional calibration methods.

Interlinkages and forecasting made possible by the use of the DECOIN analytical tool kit

This technical report is a document prepared as a deliverable [D4.3 Report of the Interlinkages and forecasting prototype tool] of a EU project – DECOIN Project No. 044428 - FP6-2005-SSP-5A. The text is divided into 4 sections: (1) this short introductory section explains the purpose of the report; (2) the second section provides a general discussion of a systemic problem found in existing quantitative analysis of sustainability. It addresses the epistemological implications of complexity, which entails the need of dealing with the existence of Multiple-Scales and non-equivalent narratives (multiple dimensions/attributes) to be used to define sustainability issues. There is an unavoidable tension between a “steady-state view” (= the perception of what is going on now – reflecting a PAST --& PRESENT view of the reality) versus an “evolutionary view” (= the unknown transformation that we have to expect in the process of becoming of the observed reality and in the observer – reflecting a PRESENT --& FUTURE view of the reality). The section ends by listing the implications of these points on the choice of integrated packages of sustainability indicators; (3) the third section illustrates the potentiality of the DECOIN toolkit for the study of sustainability trade-offs and linkages across indicators using quantitative examples taken from cases study of another EU project (SMILE). In particular, this section starts by addressing the existence of internal constraints to sustainability (economic versus social aspects). The narrative chosen for this discussion focuses on the dark side of ageing and immigration on the economic viability of social systems. Then the section continues by exploring external constraints to sustainability (economic development vs the environment). The narrative chosen for this discussion focuses on the dark side of current strategy of economic development based on externalization and the “bubbles-disease”; (4) the last section presents a critical appraisal of the quality of energy data found in energy statistics. It starts with a discussion of the general goal of statistical accounting. Then it introduces the concept of multipurpose grammars. The second part uses the experience made in the activities of the DECOIN project to answer the question: how useful are EUROSTAT energy statistics? The answer starts with an analysis of basic epistemological problems associated with accounting of energy. This discussion leads to the acknowledgment of an important epistemological problem: the unavoidable bifurcations in the mechanism of accounting needed to generate energy statistics. By using numerical example the text deals with the following issues: (i) the pitfalls of the actual system of accounting in energy statistics; (ii) a critical appraisal of the actual system of accounting in BP statistics; (iii) a critical appraisal of the actual system of accounting in Eurostat statistics. The section ends by proposing an innovative method to represent energy statistics which can result more useful for those willing develop sustainability indicators.

Validation and long-term evaluation of a modified on-line chiral analytical method for therapeutic drug monitoring of (R,S)-methadone in clinical samples.

Matrix effects, which represent an important issue in liquid chromatography coupled to mass spectrometry or tandem mass spectrometry detection, should be closely assessed during method development. In the case of quantitative analysis, the use of stable isotope-labelled internal standard with physico-chemical properties and ionization behaviour similar to the analyte is recommended. In this paper, an example of the choice of a co-eluting deuterated internal standard to compensate for short-term and long-term matrix effect in the case of chiral (R,S)-methadone plasma quantification is reported. The method was fully validated over a concentration range of 5-800 ng/mL for each methadone enantiomer with satisfactory relative bias (-1.0 to 1.0%), repeatability (0.9-4.9%) and intermediate precision (1.4-12.0%). From the results obtained during validation, a control chart process during 52 series of routine analysis was established using both intermediate precision standard deviation and FDA acceptance criteria. The results of routine quality control samples were generally included in the +/-15% variability around the target value and mainly in the two standard deviation interval illustrating the long-term stability of the method. The intermediate precision variability estimated in method validation was found to be coherent with the routine use of the method. During this period, 257 trough concentration and 54 peak concentration plasma samples of patients undergoing (R,S)-methadone treatment were successfully analysed for routine therapeutic drug monitoring.

Investigation of Postmortem Gases: A Forensic Imaging and Analytical Chemistry Approach

Background: Distinguishing postmortem gas accumulations in the body due to natural decomposition and other phenomena such as gas embolism can prove a difficult task using purely Multi-Detector Computed Tomography (MDCT). The Radiological Alteration Index (RAI) was created with the intention to be able to identify bodies undergoing the putrefaction process based on the quantity of gas detected within the body. The flaw in this approach is the inability to absolutely determine putrefaction as the origin of gas volumes in cases of moderate alteration. The aim of the current study is to identify percentage compositions of O2, N2, CO2 and the presence of gases such as H2 and H2S within these sampling sites in order to resolve this complication. Materials and methods: All cases investigated in our University Center of Legal Medicine are undergoing a Post-Mortem Computed Tomography (PMCT)-scan before external examination or autopsy as a routine investigation. In the obtained images, areas of gas were characterized as 0, I, II or III based on the amount of gas present according to the RAI (1). The criteria for these characterizations were dependent of the site of gas, for example thoracic and abdominal cavities were graded as I (1 - 3cm gas), II (3 - 5cm gas) and III (>5cm gas). Cases showing gaseous sites with grade II or III were selected for this study. The sampling was performed under CT-guidance to target the regions to be punctured. Luer-lock PTFE syringes equipped with a three-way valve and needles were used to sample the gas directly (2). Gaseous samples were then analysed using gas chromatography coupled to a thermal conductivity detector (GC-TCD). The components present in the samples were expressed as a percentage of the overall gas present. Results: Up to now, we have investigated more than 40 cases using our standardized procedure for sampling and analysis of gas. O2, N2 and CO2 were present in most samples. The following distributions were found to correlate to gas origins of gas embolism/scuba diving accidents, trauma and putrefaction: ? Putrefaction → O2 = 1 - 5%; CO2 > 15%; N2 = 10 - 70%; H2 / H2S / CH4 variable presence ? Gas embolism/Scuba diving accidents → O2 and N2= varying percentages; CO2 > 20% ? Trauma → O2 = small percentage; CO2 < 15%; N2 > 65% H2 and H2S indicated levels of putrefaction along with methane which can also gauge environmental conditions or conditions of body storage/burial. Many cases showing large RAI values (advanced alteration) did reveal a radiological diagnosis which was in concordance with the interpretation of the gas composition. However, in certain cases (gas embolism, scuba divers) radiological interpretation was not possible and only chemical gas analysis was found to lead to the correct diagnosis, meaning that it provided complementary information to the radiological diagnosis. Conclusion: Investigation of postmortem gases is a useful tool to determine origin of gas generation which can aid the diagnosis of the cause of death. Levels of gas can provide information on stage of putrefaction and help to perform essential medico-legal diagnosis such as vital gas embolism.

Interest of qualitative and quantitative profiling of endocannabinoids for evaluation of their implication in drug addiction process

Introduction: In the middle of the 90's, the discovery of endogenous ligands for cannabinoid receptors opened a new era in this research field. Amides and esters of arachidonic acid have been identified as these endogenous ligands. Arachidonoylethanolamide (anandamide or AEA) and 2-Arachidonoylglycerol (2-AG) seem to be the most important of these lipid messengers. In addition, virodhamine (VA), noladin ether (2-AGE), and N-arachidonoyl dopamine (NADA) have been shown to bind to CB receptors with varying affinities. During recent years, it has become more evident that the EC system is part of fundamental regulatory mechanisms in many physiological processes such as stress and anxiety responses, depression, anorexia and bulimia, schizophrenia disorders, neuroprotection, Parkinson disease, anti-proliferative effects on cancer cells, drug addiction, and atherosclerosis. Aims: This work presents the problematic of EC analysis and the input of Information Dependant Acquisition based on hybrid triple quadrupole linear ion trap (QqQLIT) system for the profiling of these lipid mediators. Methods: The method was developed on a LC Ultimate 3000 series (Dionex, Sunnyvale, CA, USA) coupled to a QTrap 4000 system (Applied biosystems, Concord, ON, Canada). The ECs were separated on an XTerra C18 MS column (50 × 3.0 mm i.d., 3.5 μm) with a 5 min gradient elution. For confirmatory analysis, an information-dependant acquisition experiment was performed with selected reaction monitoring (SRM) as survey scan and enhanced produced ion (EPI) as dependant scan. Results: The assay was found to be linear in the concentration range of 0.1-5 ng/mL for AEA, 0.3-5 ng/mL for VA, 2-AGE, and NADA and 1-20 ng/mL for 2-AG using 0.5 mL of plasma. Repeatability and intermediate precision were found less than 15% over the tested concentration ranges. Under non-pathophysiological conditions, only AEA and 2-AG were actually detected in plasma with concentration ranges going from 104 to 537 pg/mL and from 2160 to 3990 pg/mL respectively. We have particularly focused our scopes on the evaluation of EC level changes in biological matrices through drug addiction and atherosclerosis processes. We will present preliminary data obtained during pilot study after administration of cannabis on human patients. Conclusion: ECs have been shown to play a key role in regulation of many pathophysiological processes. Medical research in these different fields continues to growth in order to understand and to highlight the predominant role of EC in the CNS and peripheral tissues signalisation. The profiling of these lipids needs to develop rapid, highly sensitive and selective analytical methods.

Infornut® Process; improves accessibility to diagnosis and nutritional support for the malnourished hospitalized patient; impact on management indicators; two-year assessment.

Introduction: The high prevalence of disease-related hospital malnutrition justifies the need for screening tools and early detection in patients at risk for malnutrition, followed by an assessment targeted towards diagnosis and treatment. At the same time there is clear undercoding of malnutrition diagnoses and the procedures to correct it Objectives: To describe the INFORNUT program/ process and its development as an information system. To quantify performance in its different phases. To cite other tools used as a coding source. To calculate the coding rates for malnutrition diagnoses and related procedures. To show the relationship to Mean Stay, Mortality Rate and Urgent Readmission; as well as to quantify its impact on the hospital Complexity Index and its effect on the justification of Hospitalization Costs. Material and methods: The INFORNUT® process is based on an automated screening program of systematic detection and early identification of malnourished patients on hospital admission, as well as their assessment, diagnoses, documentation and reporting. Of total readmissions with stays longer than three days incurred in 2008 and 2010, we recorded patients who underwent analytical screening with an alert for a medium or high risk of malnutrition, as well as the subgroup of patients in whom we were able to administer the complete INFORNUT® process, generating a report for each.

The succession process at social enterprises in Brazil

This research was based on a study of social enterprises in Brazil, to find out if and how these organizations plan and manage the succession process for their senior positions. The study investigated the subset of the associations dedicated to collectively producing goods and services, because they are formally set up and aimed at speeding up the dynamism of local development. The empirical research consisted of two stages. The first was a survey covering a sample of 378 organizations, to find out which of those had already undergone or were undergoing a succession process. The second interviewed the main manager of 32 organizations, to obtain a description of their succession experience. In this stage, the research aimed to analyze how the Individual, Organization and Environment dimensions interact to configure the succession process, identifying which factors of each of these dimensions can facilitate or limit this process. The following guiding elements were taken as the analytical basis: Individual dimension - leadership roles, skill and styles; Organization dimension - structure, planning, advisory boards, communication (transparency), control and evaluation; and Environment dimension - influence of the stakeholders (community, suppliers, clients, and business partners) on the succession process. The results indicated that succession in the researched associations is in the construction stage: it adapts to the requirements of current circumstances but is evidently in need of improvement in order for more effective planning and shared management of the process to be achieved.

A hierarchical approach to model parameter optimization for developmental systems.

In the context of Systems Biology, computer simulations of gene regulatory networks provide a powerful tool to validate hypotheses and to explore possible system behaviors. Nevertheless, modeling a system poses some challenges of its own: especially the step of model calibration is often difficult due to insufficient data. For example when considering developmental systems, mostly qualitative data describing the developmental trajectory is available while common calibration techniques rely on high-resolution quantitative data. Focusing on the calibration of differential equation models for developmental systems, this study investigates different approaches to utilize the available data to overcome these difficulties. More specifically, the fact that developmental processes are hierarchically organized is exploited to increase convergence rates of the calibration process as well as to save computation time. Using a gene regulatory network model for stem cell homeostasis in Arabidopsis thaliana the performance of the different investigated approaches is evaluated, documenting considerable gains provided by the proposed hierarchical approach.

Hierarchical categorisation of tags for delicious

In the scenario of social bookmarking, a user browsing the Web bookmarks web pages and assigns free-text labels (i.e., tags) to them according to their personal preferences. In this technical report, we approach one of the practical aspects when it comes to represent users' interests from their tagging activity, namely the categorization of tags into high-level categories of interest. The reason is that the representation of user profiles on the basis of the myriad of tags available on the Web is certainly unfeasible from various practical perspectives; mainly concerning the unavailability of data to reliably, accurately measure interests across such fine-grained categorisation, and, should the data be available, its overwhelming computational intractability. Motivated by this, our study presents the results of a categorization process whereby a collection of tags posted at Delicious #http://delicious.com# are classified into 200 subcategories of interest.

Higher education in nursing: the faculty work process in different institutional contexts

Objective To analyze the characteristics of faculty work in nursing higher education. Method An exploratory qualitative study with a theoretical-methodological framework of dialectical and historical materialism. The faculty work process was adopted as the analytical category, grounded on conceptions of work and professionalism. Semi-structured interviews were conducted with 24 faculty members from three higher education institutions in the city of São Paulo, classified according to the typology of institutional contexts. Results The faculty members at these higher education institutions are a heterogeneous group, under different working conditions. Intensification and precarious conditions of the faculty work is common to all three contexts, although there are important distinctions in the practices related to teaching, research and extension. Conclusion Faculty professionalization can be the starting point for analyzing and coping with such a distinct reality of faculty work and practice.


Use of NIR spectroscopy and multivariate process spectra calibration methodology for pharmaceutical solid samples analysis

Accomplish high quality of final products in pharmaceutical industry is a challenge that requires the control and supervision of all the manufacturing steps. This request created the necessity of developing fast and accurate analytical methods. Near infrared spectroscopy together with chemometrics, fulfill this growing demand. The high speed providing relevant information and the versatility of its application to different types of samples lead these combined techniques as one of the most appropriated. This study is focused on the development of a calibration model able to determine amounts of API from industrial granulates using NIR, chemometrics and process spectra methodology.

Spanish unemployment : normative versus analytical regionalisation procedures

In applied regional analysis, statistical information is usually published at different territorial levels with the aim providing inforamtion of interest for different potential users. When using this information, there are two different choices: first, to use normative regions ( towns, provinces, etc.) or, second, to design analytical regions directly related with the analysed phenomena. In this paper, privincial time series of unemployment rates in Spain are used in order to compare the results obtained by applying yoy analytical regionalisation models ( a two stages procedure based on cluster analysis and a procedure based on mathematical programming) with the normative regions available at two different scales: NUTS II and NUTS I. The results have shown that more homogeneous regions were designed when applying both analytical regionalisation tools. Two other obtained interesting results are related with the fact that analytical regions were also more estable along time and with the effects of scales in the regionalisation process