Impacts of the Oceans on Climate Change

The oceans play a key role in climate regulation especially in part buffering (neutralising) the effects of increasing levels of greenhouse gases in the atmosphere and rising global temperatures. This chapter examines how the regulatory processes performed by the oceans alter as a response to climate change and assesses the extent to which positive feedbacks from the ocean may exacerbate climate change. There is clear evidence for rapid change in the oceans. As the main heat store for the world there has been an accelerating change in sea temperatures over the last few decades, which has contributed to rising sea‐level. The oceans are also the main store of carbon dioxide (CO2), and are estimated to have taken up ∼40% of anthropogenic-sourced CO2 from the atmosphere since the beginning of the industrial revolution. A proportion of the carbon uptake is exported via the four ocean ‘carbon pumps’ (Solubility, Biological, Continental Shelf and Carbonate Counter) to the deep ocean reservoir. Increases in sea temperature and changing planktonic systems and ocean currents may lead to a reduction in the uptake of CO2 by the ocean; some evidence suggests a suppression of parts of the marine carbon sink is already underway. While the oceans have buffered climate change through the uptake of CO2 produced by fossil fuel burning this has already had an impact on ocean chemistry through ocean acidification and will continue to do so. Feedbacks to climate change from acidification may result from expected impacts on marine organisms (especially corals and calcareous plankton), ecosystems and biogeochemical cycles. The polar regions of the world are showing the most rapid responses to climate change. As a result of a strong ice–ocean influence, small changes in temperature, salinity and ice cover may trigger large and sudden changes in regional climate with potential downstream feedbacks to the climate of the rest of the world. A warming Arctic Ocean may lead to further releases of the potent greenhouse gas methane from hydrates and permafrost. The Southern Ocean plays a critical role in driving, modifying and regulating global climate change via the carbon cycle and through its impact on adjacent Antarctica. The Antarctic Peninsula has shown some of the most rapid rises in atmospheric and oceanic temperature in the world, with an associated retreat of the majority of glaciers. Parts of the West Antarctic ice sheet are deflating rapidly, very likely due to a change in the flux of oceanic heat to the undersides of the floating ice shelves. The final section on modelling feedbacks from the ocean to climate change identifies limitations and priorities for model development and associated observations. Considering the importance of the oceans to climate change and our limited understanding of climate-related ocean processes, our ability to measure the changes that are taking place are conspicuously inadequate. The chapter highlights the need for a comprehensive, adequately funded and globally extensive ocean observing system to be implemented and sustained as a high priority. Unless feedbacks from the oceans to climate change are adequately included in climate change models, it is possible that the mitigation actions needed to stabilise CO2 and limit temperature rise over the next century will be underestimated.

The phase diagram of water at negative pressures: Virtual ices

The phase diagram of water at negative pressures as obtained from computer simulations for two models of water, TIP4P/2005 and TIP5P is presented. Several solid structures with lower densities than ice Ih, so-called virtual ices, were considered as possible candidates to occupy the negative pressure region of the phase diagram of water. In particular the empty hydrate structures sI, sII, and sH and another, recently proposed, low-density ice structure. The relative stabilities of these structures at 0 K was determined using empirical water potentials and density functional theory calculations. By performing free energy calculations and Gibbs-Duhem integration the phase diagram of TIP4P/2005 was determined at negative pressures. The empty hydrates sII and sH appear to be the stable solid phases of water at negative pressures. The phase boundary between ice Ih and sII clathrate occurs at moderate negative pressures, while at large negative pressures sH becomes the most stable phase. This behavior is in reasonable agreement with what is observed in density functional theory calculations.

Gas Hydrate Inhibition: A Review of the Role of Ionic Liquids

Ionic liquids (ILs) are popular designer green chemicals with great potential for use in diverse energy-related applications. Apart from the well-known low vapor pressure, the physical properties of ILs, such as hydrogen-bond-forming capacity, physical state, shape, and size, can be fine-tuned for specific applications. Natural gas hydrates are easily formed in gas pipelines and pose potential problems to the oil and natural gas industry, particularly during deep-sea exploration and production. This review summarizes the recent advances in IL research as dual-function gas hydrate inhibitors. Almost all of the available thermodynamic and kinetic inhibition data in the presence of ILs have been systematically reviewed to evaluate the efficiency of ILs in gas hydrate inhibition, compared to other conventional thermodynamic and kinetic gas hydrate inhibitors. The principles of natural gas hydrate formation, types of gas hydrates and their inhibitors, apparatuses and methods used, reported experimental data, and theoretical methods are thoroughly and critically discussed. The studies in this field will facilitate the design of advanced ILs for energy savings through the development of efficient low-dosage gas hydrate inhibitors.

Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes

As the relative performance of alkali activated slag (AAS) concretes in comparison to Portland cement (PC) counterparts for chloride transport and resulting corrosion of steel bars is not clear, an investigation was carried out and the results are reported in this paper. The effect of alkali concentration and modulus of sodium silicate solution used in AAS was studied. Chloride transport and corrosion properties were assessed with the help of electrical resistivity, non-steady state chloride diffusivity, onset of corrosion, rate of corrosion and pore solution chemistry. It was found that: (i) although chloride content at surface was higher for the AAS concretes, they had lower chloride diffusivity than PC concrete; (ii) pore structure, ionic exchange and interaction effect of hydrates strongly influenced the chloride transport in the AAS concretes; (iii) steel corrosion resistance of the AAS concretes was comparable to that of PC concrete under intermittent chloride ponding regime, with the exception of 6% Na2O and Ms of 1.5; (iv) the corrosion behaviour of the AAS concretes was significantly influenced by ionic exchange, carbonation and sulphide concentration; (v) the increase of alkali concentration of the activator generally increased the resistance of AAS concretes to chloride transport and reduced its resulting corrosion, and a value of 1.5 was found to be an optimum modulus for the activator for improving the chloride transport and the corrosion resistance.

Études génétiques de familles récessives d’ataxies et de paraplégies spastiques

Au cours des dernières années, la génétique a subi une progression phénoménale suite au développement de nouvelles technologies de séquençage. En effet, le séquençage de l’exome entier chez des familles a permis l’identification de nouveaux gènes impliqués pour plusieurs maladies. La neurologie a d’ailleurs bénéficié de ces avancées et plusieurs gènes ont été mis en évidence comme causatifs pour différents désordres neurologiques. Dans ce travail il sera question de deux désordres du mouvement pour lequel nous avons utilisés des technologies de séquençage traditionnelles, en l’occurrence le séquençage par Sanger, ainsi que de nouvelles technologies pour le séquençage de l’exome entier afin d’identifier de nouveaux gènes causatifs. Le premier désordre du mouvement qui sera décrit est l’ataxie, où ne seront abordées que les ataxies de cause génétiques, à transmission récessive. Le premier chapitre relatera les nouvelles mutations qui ont été trouvées chez des canadiens-français souffrant de l’ataxie de Beauce. Il sera aussi question de nouvelles mutations retrouvées dans deux autres populations, confirmant l’implication du gène SYNE1 dans les cas d’ataxie cérébelleuse à travers le monde. Le second chapitre fera la démonstration qu’il est souhaitable d’utiliser le séquençage de l’exome entier dans le but de poser un diagnostic clinique. En effet, il a été possible de trouver la cause génétique d’une famille comportant deux membres atteints d’atrophie congénitale du cervelet, où le symptôme prédominant est l’ataxie. Le séquençage de l’exome a permis la mise en évidence de mutations dans le gène PMM2, déjà connues pour cause le syndrome des glycoprotéines déficientes en hydrates de carbone. Dans un second temps, il sera question d’un autre désordre du mouvement la paraplégie spastique familiale (PSF). Le chapitre 3 relatera les mutations trouvées dans le gène CYP7B1 dans notre cohorte de patients PSF.

Mécanismes impliqués dans les effets du récepteur à la (pro)rénine sur le développement de l'obésité et de ses complications cardiométaboliques associées

L'obésité est une maladie associée à de nombreuses complications comme le diabète de type 2, l'hypertension et le cancer. De nos jours, les modifications au mode de vie, tels l’alimentation et le niveau d’activité physique, ne sont pas suffisants pour combattre les effets délétères de l'obésité. La pharmacothérapie est un traitement alternatif bien que les effets bénéfiques soient temporaires et ne peuvent être maintenus à long terme. Le besoin pour un traitement bénéfique à long terme sans effet secondaire n'est pas comblé. Mieux connu pour son rôle dans la régulation de la pression artérielle, le système rénine-angiotensine favorise l'entreposage du gras. Le récepteur à la prorénine et à la rénine est une composante du système rénine-angiotensine. Ainsi, le récepteur qui amplifie l'activation de celui-ci pourrait avoir un rôle clé dans le gain de masse grasse. Le but de ce projet de thèse est d'évaluer le rôle du récepteur à la prorénine et à la rénine dans le développement de l'obésité et de ses complications chez la souris et ce, en utilisant une combinaison de diète riche en gras et en hydrates de carbone et du handle region peptide, un bloqueur du récepteur à la prorénine à la rénine. Après une période de 10 semaines, nous avons constaté que l'expression et la protéine du récepteur à la prorénine et à la rénine augmentent spécifiquement dans le tissu adipeux sous-cutané et viscéral des souris obèses. Lorsqu'administré en concomitance avec une diète riche en gras et en hydrates de carbone, le handle region peptide favorise chez la souris des diminutions des gains des masses corporelles et adipeuses viscérales. Une diminution de l'expression de l'enzyme catalysant la dernière étape de la lipogenèse pourrait être responsable de la réduction de gras viscéral. Chez les mêmes animaux, l'expression de plusieurs adipokines est également diminuée dans le tissu adipeux suggérant une réduction de la résistance à l'insuline, de l'inflammation et de l'infiltration des macrophages localement dans le gras sous-cutané et viscéral. L'augmentation de l'expression d’un marqueur de l'adipogenèse dans le tissu adipeux sous-cutané pourrait suggérer un plus grand nombre d'adipocytes. Cela pourrait tamponner l'excès d'acides gras libres circulants puisque nous avons constaté une diminution de ce paramètre chez les souris ayant une diète riche en gras et en hydrates de carbone et traitées avec le peptide. Nous avons émis l'hypothèse qu'un cycle futile pourrait être activé dans le gras sous-cutané car nous avons observé une augmentation de l'expression de plusieurs enzymes impliquées dans la lipogenèse et dans la lipolyse. Le ''brunissement'' du tissu adipeux est la présence de cellules similaires aux adipocytes bruns dans le tissu adipeux qui sont caractérisés par une grande densité mitochondriale et la thermogenèse. L'augmentation de l'expression des marqueurs de ''brunissement'' et de biogenèse de mitochondrie dans le gras sous-cutané suggère que le ''brunissement'' pourrait également être activé dans ce dépôt de gras. La sensibilité à l'insuline chez ces animaux pourrait être améliorée telle que suggérée en circulation par la diminution de l'insuline, par le glucose qui change peu, par l'augmentation du ratio glucose sur insuline ainsi que par un changement potentiel dans la corrélation entre le poids corporel de la souris et les niveaux d’adiponectine circulante. Nos travaux suggèrent que le handle region peptide pourrait augmenter la capacité du tissu adipeux sous-cutané à métaboliser les lipides circulants avec l'activation potentielle d'un cycle futile et le ''brunissement''. Cela préviendrait le dépôt ectopique de lipides vers les compartiments viscéraux comme le suggère la réduction de masse adipeuse viscérale chez les souris ayant une diète riche en gras et en hydrates de carbone et traitées avec le peptide. Utilisant un modèle de souris, cette étude démontre le potentiel pharmacologique du handle region peptide comme un nouveau traitement pour prévenir l'obésité.

Solvothermal Preparation of Drug Crystals: Didanosine

For the first time, crystals of suitable size for X-ray diffractometry structure determination (Dian important anti-HI V drug were prepared under solvothermal conditions. In this study, the crystal structure of didanosine (2`,3`-dideoxyinosine, ddI) in the form of a hydrate was determined using single-crystal X-ray diffractometry. Powder X-ray diffraction analysis revealed that the solid-state phase of the drug incorporated into pharmaceutical solid dosage forms is isostructural to the solvothermally prepared ddI material, even though they do not exhibit an identical chemical composition due to different water fractions occupying hydrophobic channels formed within the crystal lattice. Two ddI conformers are present in the structure, in agreement with a previous structure elucidation attempt. Concerning the keto enol equilibrium of ddI, our crystal data and vibrational characterizations by Fourier transform infrared (FTIR) and FT-Raman spectroscopy techniques were conclusive to state that both conformers exist in the keto form, contrary to solid-state NMR spectroscopic assignments that suggested ddI molecules occur as enol tautomers. In addition, characterizations by thermal (differential scanning calorimetry) and spectroscopic techniques allowed us to understand the structural similarities and the differences related to the hydration pattern of the nonstoichiometric hydrates.

Nuclear Magnetic Resonance Study of Hydrated Bentonite

Impedance spectroscopy and nuclear magnetic resonance (NMR) were used to investigate the mobility of water molecules located in the interlayer space of H(+) - exchanged bentonite clay. The conductivity obtained by ac measurements was 1.25 x 10(-4) S/cm at 298 K. Proton ((1)H) lineshapes and spin-lattice relaxation times were measured as a function of temperature over the temperature range 130-320 K. The NMR experiments exhibit the qualitative features associated with the proton motion, namely the presence of a (1)H NMR line narrowing and a well-defined spin-lattice relaxation rate maximum. The temperature dependence of the proton spin-lattice relaxation rates was analyzed with the spectral density function appropriate for proton dynamics in a two-dimensional system. The self-diffusion coefficient estimated from our NMR data, D similar to 2 x 10(-7) cm(2)/s at 300 K, is consistent with those reported for exchanged montmorillonite clay hydrates studied by NMR and quasi-elastic neutron scattering (QNS).

Estudo de uma coluna de absorção recheada para desidratação do gás natural utilizando microemulsão como absorvente

During natural gas processing, water removal is considered as a fundamental step in that combination of hydrocarbons and water favors the formation of hydrates. The gas produced in the Potiguar Basin (Brazil) presents high water content (approximately 15000 ppm) and its dehydration is achieved via absorption and adsorption operations. This process is carried out at the Gas Treatment Unit (GTU) in Guamaré (GMR), in the State of Rio Grande do Norte. However, it is a costly process, which does not provide satisfactory results when water contents as low as 0.5 ppm are required as the exit of the GTU. In view of this, microemulsions research is regarded as an alternative to natural gas dehydration activities. Microemulsions can be used as desiccant fluids because of their unique proprieties, namely solubilization enhancement, reduction in interfacial tensions and large interfacial area between continuous and dispersed phases. These are actually important parameters to ensure the efficiency of an absorption column. In this work, the formulation of the desiccant fluid was determined via phases diagram construction, employing there nonionic surfactants (RDG 60, UNTL L60 and AMD 60) and a nonpolar fluid provided by Petrobras GMR (Brazil) typically comprising low-molecular weight liquid hydrocarbons ( a solvent commonly know as aguarrás ). From the array of phases diagrams built, four representative formulations have been selected for providing better results: 30% RDG 60-70% aguarrás; 15% RDG 60-15% AMD 60-70% aguarrás, 30% UNTL L60-70% aguarrás, 15% UNTL L60-15% AMD 60-70% aguarrás. Since commercial natural gas is already processed, and therefore dehydrated, it was necessary to moister some sample prior to all assays. It was then allowed to cool down to 13ºC and interacted with wet 8-12 mesh 4A molecular sieve, thus enabling the generation of gas samples with water content (approximately 15000 ppm). The determination of the equilibrium curves was performed based on the dynamic method, which stagnated liquid phase and gas phase at a flow rate of 200 mL min-1. The hydrodynamic study was done with the aim of established the pressure drop and dynamic liquid hold-up. This investigation allowed are to set the working flow rates at 840 mL min-1 for the gas phase and 600 mLmin-1 for the liquid phase. The mass transfer study indicated that the system formed by UNTL L60- turpentine-natural gas the highest value of NUT

Treatment of venous ulcers with fibrin sealant derived from snake venom

Venous ulcers of the lower limbs complicated by infection or chronicity represent a serious public health problem. The elevated number of those afflicted burdens the health services, interferes in quality of life and causes absenteeism. Although there are 2,500 items on the market, ranging from the simplest dressing up to the most complex types of dressing, treatment remains a challenge. Among the substances used, fibrin sealant is the one that promotes diminution of bacterial colonization and of edema, controls hemorrhaging, alters the pain threshold by protecting the nerve endings, hydrates the wound bed and forms granulation tissue that favors healing. Its disadvantages include higher cost and utilization of human fibrinogen that can transmit infectious diseases. The Center for the Study of Venoms and Venomous Animals (CEVAP) at São Paulo State University (UNESP) developed a new sealant made up of fibrinogen extracted from large animals and from an enzyme obtained from snake venom. The present study, developed in the Health Education Clinic (CEPS) of Sacred Heart University (USC) aimed to evaluate the effect of the new sealant on the healing process of venous ulcers in 24 adult patients, seven of whom were male and 17 female. Two study groups were formed as follows: Group 1 (G1) - control group of 11 patients treated with essential fatty acid (EFA) and Unna's boot, and Group 2 (G2) - 13 patients treated with essential fatty acid (EFA), fibrin sealant and Unna's boot. The follow-up lasted eight weeks and the sealant was applied at only the first and fourth weeks. The results showed that Group 2 presented worse lesion conditions as to healing, but, when comparing the two groups, it was noteworthy that the the sealant was effective in healing venous ulcers. There is evidence that the new sealant is recommended for leg ulcers with the following advantages: ease of application, preparation of the wound bed, diminution of pain and a higher number of discharges in the eighth week. More important, other positive characteristics are non-transmission of infectious diseases, absence of adverse reactions, and economic advantage of being produced by Brazilian technology. Finally, it is suggested that the weekly application of sealant, for at least eight weeks, could improve the healing process and consequently life quality.

Effects of temperature and of the addition of accelerating and retarding agents on the kinetics of hydration of tricalcium silicate

The formation of calcium silicate hydrates (C-S-H) during the hydration of tricalcium silicate (C3S) in pure water and in water solutions containing 1% CaCl2 (accelerator) and 0.01% saccharose (retarder) was studied by small-angle X-ray scattering (SAXS). SAXS measurements were performed under isothermal conditions within the temperature range 25 °C T < 52 °C. The experimental results indicate that the time variation of the mass fraction of the C-S-H product phase, α(f), can be fitted, under all conditions of paste setting, by Avrami equation, α(t) = 1 -exp(-(kt)′), k being a rate parameter and n an exponent depending on the characteristics of the transformation. The parameter n is approximately equal to 2 for hydration of C^S in pure water. Depending on temperature, n varies from 2 to 2.65 for hydration in the presence of CaC^ and saccharose. The value n = 2 is theoretically expected for lateral growth of thin C-S-H plates of constant thickness. The time dependence of SAXS intensity indicates that the transformed phase (C-S-H) consists of colloidal particles in early stages of hydration, evolving by two-dimensional growth toward a disordered lamellar structure composed of very thin plates. The activation energy ΔE for the growth of C-S-H phase was determined from the time dependence of X-ray scattering intensity. These data were obtained by in situ measurements at different temperatures of hydration. The values of ΔE are 37.7, 49.4, and 44.3 kJ/mol for hydration in pure water and in water solutions containing CaCl2 and saccharose, respectively. © 2000 American Chemical Society.

Evolution of the mechanical properties of a tropical soil stabilized with lime and ash of rice rind

The ash of rice rind is a pozzolanic material that reacts with the calcium hydroxide (Ca (OH)2) forming bonding composites, when finely worn out and in water presence. Considering this behavior, the objective of the present work was to evaluate the potential use of this residue in the enrichment of the content of pozzolanic materials of a tropical soil stabilized with a commercial hydrated lime. The laboratory testing program incorporated unconfined compression strength tests performed on the soil and on its mixtures with contents of 8% of lime enriched with 5 and 10% of ash of rice rind in relation to the soil dry mass. The results of the testing program supported that the use of the residue was effective in increasing the degree of reactivity of the soil that was also directly related with the increase in the ash content and the period of cure of the mixtures.

Análise da dieta e condição de saúde bucal em pacientes gestantes

Objectve: To perform a critical analysis of the diet record model adopted, to evaluate the cariogenicity of the maternal diet, and the incidence of dental caries in pregnant women treated at a prevent on clinic in an undergraduate dental course. Method: A cross-sectional study was performed with consultations to the database of the clinic and review of patients' charts and diet records. The sample was calculated and 205 patents were randomly selected. Bivariate statistical analysis was done at a significance level of 5% (α=0.05), using the statistical soft wares Epi Info versão 3.2, GraphPad Instat 3.6 and BioEstat. Results: The analysis of the diet records showed that 68.8% of the pregnant women presented a cariogenic diet, with high frequency of ingest on of fermentable carbon hydrates, mainly sucrose, with liquid consistency, and preferably consumed between the main meals. There was higher trend of the pregnant women mentioning a low frequency of carbon hydrate ingestion during the interview, while registering a diet rich of these components in their diet records (p<0.0001). The mean DMFT of the patients was 13.9 ± 5.4. There was no statistically significant association between diet and oral health variables (p>0.05). Conclusion: The diet record was proven an effective and valid method, if correctly employed. The prevalence of dental caries in the group of pregnant women was high and, although more than half of the sample presented a cariogenic diet, a significant association between diet and co-factors was not found.

Use of high-resolution thermogravimetric analysis (HRTG) technique in spent FCC catalyst/Portland cement pastes

Thermogravimetric analysis is one of the most common instrumental techniques used for the characterization of pastes, mortars and concretes based on both calcium hydroxide and Portland cement. Important information about pozzolanic materials can be assessed concerning calcium hydroxide consumption and the formation of new hydrated products. Nevertheless, in some cases, problems associated with the overlapped decomposition processes for hydrates make the analysis of obtained data difficult. In this paper, the use of high-resolution thermogravimetric analysis, a powerful technique that allows separating decomposition processes in analysis of hydrated binders, was performed for spent FCC catalyst-Portland cement pastes. These pastes were monitored for 1, 4, 8 h and 1, 2, 3, 7 and 28 curing days. In order to study the influence of the pozzolanic material (spent FCC catalyst), Portland cement replacements of 5, 15 and 30 % by mass were carried out. The presence of spent FCC catalyst in blended pastes modified the amount and the nature of the formed hydrates, mainly ettringite and stratlingite.

Thermal decomposition of the hydrated basic carbonates of lanthanides and yttrium

Thermogravimetry, differential thermal analysis, differential scanning calorimetry, IR absorption spectroscopy, X-ray diffraction, and other methods of analysis have been used in the characterization and study of the thermal decomposition of the basic carbonate hydrates of lanthanides and yttrium. These compounds were obtained by precipitation from homogeneous solutions via the hydrolysis of urea, without the addition of an auxiliary anion. The results show that the TG and DTA curves are characteristic for each compound. The results also permit suggestions concerning the compositions and mechanisms of thermal decomposition of these compounds. © 1989.