Evaluación de la extracción de plomo y cadmio de vajilla cerámica vidriada

Se evalúa si una sola extracción, mediante la aplicación de un método de ensayo normalizado que simula condiciones extremas de uso, permite determinar el contenido total de plomo y cadmio presente en piezas de vajilla cerámica que entran en contacto con los alimentos y su implicación en el resultado analítico. Se aplicó el método de ensayo varias veces sobre materiales de referencia de cerámica con diferentes concentraciones iniciales de plomo y el cadmio para cuantificar la liberación sucesiva de ambos metales. El lixiviado en cada aplicación se analizó por absorción atómica. Los resultados mostraron que una sola aplicación del método de ensayo no extrae todo el plomo y el cadmio en la vajilla cerámica. Se observaron liberaciones posteriores para todas las piezas de cerámica a prueba con diferente concentración inicial. Para cadmio se registraron las siguientes variaciones en las extracciones: 40 a 95% en la primera extracción, de 0 a 28% en la segunda, de 0.2 hasta 21% en la tercera, y de 1 a 40% en la cuarta. Para el plomo, se registraron los subsiguientes valores en los lixiviados entre el 50 y el 93% en la primera prueba, entre el 2 y el 24% en la segunda, entre el 2 y el 18% en la tercera y entre el 2 y el 17% en la cuarta extracción. Los resultados revelan que la cantidad total de plomo y cadmio liberado en una sola prueba estándar no reflejan el contenido total de plomo y cadmio que las piezas de cerámica liberan a largo plazo después de su uso.

Lacunae Infills for in Situ Treatment of Historic Glazed Tiles

Knowledge of current conservation materials and methods together with those adopted in the past is essential to aid research and improve or develop better conservation options. The infill and painting of tile lacunae are subjected to special requirements mainly when used in outdoor settings. A selection of the most commonly used materials was undertaken and performed based on inquiries to practitioners working in the field. The infill pastes comprised organic (epoxy, polyester), inorganic (slaked lime,hydraulic lime and zinc hydroxychloride) and mixed organic–inorganic (slaked lime mixed with a vinylic resin)binders. The selected aggregates were those most commonly used or those already present in the commercially formulated products. The infill pastes were characterised by SEM, MIP, open porosity, water absorption by capillarity, water vapour permeability, thermal and hydric expansibilities and adhesion to the ceramic body. Their performance was assessed after curing, artificial ageing (salt ageing and UV–Temp–RH cycles) and natural ageing. The results were interpreted in terms of their significance as indicators of effectiveness, compatibility and durability

An integrated approach for assessing the bioreceptivity of glazed tiles to phototrophic microorganisms

A laboratory-based methodology was designed to assess the bioreceptivity of glazed tiles. The experimental set-up consisted of multiple steps: manufacturing of pristine and artificially aged glazed tiles, enrichment of phototrophic microorganisms, inoculation of phototrophs on glazed tiles, incubation under optimal conditions and quantification of biomass. In addition, tile intrinsic properties were assessed to determine which material properties contributed to tile bioreceptivity. Biofilm growth and biomass were appraised by digital image analysis, colorimetry and chlorophyll a analysis. SEM, micro-Raman and micro-particle induced X-ray emission analyses were carried out to investigate the biodeteriorating potential of phototrophic microorganisms on the glazed tiles. This practical and multidisciplinary approach showed that the accelerated colonization conditions allowed different types of tile bioreceptivity to be distinguished and to be related to precise characteristics of the material. Aged tiles showed higher bioreceptivity than pristine tiles due to their higher capillarity and permeability. Moreover, biophysical deterioration caused by chasmoendolithic growth was observed on colonized tile surfaces.

The use of high dynamic range luminance mapping in the assessment, understanding and defining of visual issues in post occupancy building assessment

The international focus on embracing daylighting for energy efficient lighting purposes and the corporate sector’s indulgence in the perception of workplace and work practice “transparency” has spurned an increase in highly glazed commercial buildings. This in turn has renewed issues of visual comfort and daylight-derived glare for occupants. In order to ascertain evidence, or predict risk, of these events; appraisals of these complex visual environments require detailed information on the luminances present in an occupant’s field of view. Conventional luminance meters are an expensive and time consuming method of achieving these results. To create a luminance map of an occupant’s visual field using such a meter requires too many individual measurements to be a practical measurement technique. The application of digital cameras as luminance measurement devices has solved this problem. With high dynamic range imaging, a single digital image can be created to provide luminances on a pixel-by-pixel level within the broad field of view afforded by a fish-eye lens: virtually replicating an occupant’s visual field and providing rapid yet detailed luminance information for the entire scene. With proper calibration, relatively inexpensive digital cameras can be successfully applied to the task of luminance measurements, placing them in the realm of tools that any lighting professional should own. This paper discusses how a digital camera can become a luminance measurement device and then presents an analysis of results obtained from post occupancy measurements from building assessments conducted by the Mobile Architecture Built Environment Laboratory (MABEL) project. This discussion leads to the important realisation that the placement of such tools in the hands of lighting professionals internationally will provide new opportunities for the lighting community in terms of research on critical issues in lighting such as daylight glare and visual quality and comfort.

The influence of glass types on the performance of air-conditioned office buildings in Australia

Windows are one of the most significant elements in the design of buildings. Whether there are small punched openings in the facade or a completely glazed curtain wall, windows are usually a dominant feature of the building's exterior appearance. From the energy use perspective, windows may also be regarded as thermal holes for a building. Therefore, window design and selection must take both aesthetics and serviceability into consideration. In this paper, using building computer simulation techniques, the effects of glass types on the thermal and energy performance of a sample air-conditioned office building in Australia are studied. It is found that a glass type with lower shading coefficient will have a lower building cooling load and total energy use. Through the comparison of results between current and future weather scenarios, it is identified that the pattern found from the current weather scenario would also exist in the future weather scenario, although the scale of change would become smaller. The possible implication of glazing selection in face of global warming is also examined. It is found that compared with its influence on building thermal performance, its influence on the building energy use is relatively small or insignificant.

Badge : Brisbane Office

This two-storey office building and upper floor interior fit-out, completed for the 25th anniversary of Adelaide-based construction firm, Badge Constructions, is a signature building for the client, and its recently established Brisbane-based operations, and a showpiece for their commercial and industrial construction prowess and dynamic, collaborative and transparent work ethic. Situated in the industrial precinct of Bulimba’s Oxford Street, the building is a continuation of the street’s nearby commercial heart, whilst its architectural language references the adjacent industrial structures. The building’s shed-like skillion roof and western wall have been considered as a folded plane, allowing space to be considered as the inhabitation of the inner surface of this plane. The analogy of a lined garment, tailored to suit its wearer, clarifies the relationship between the western façade plane’s unadorned, monochromatic outer surface and the coloured and patterned inner surface, celebrating inhabitation. The use of typically external construction materials are re-positioned as an integral part of the building’s interior fit-out, alluding to Badge’s construction repertoire, and weakening traditional barriers between interior and exterior commercial space. In reference to its Queensland context, the external glazed line of the building is pulled back from the street, providing an eastern verandah edge and a northern court, as a part of the public realm. The upper floor office incorporates a cantilevered outdoor mezzanine within the northern court, whilst the adjacent reception area and stairwell utilises clear glazing in order to visually connect to the street. The building is designed to take advantage of natural light to the east, whilst shading habitable spaces from the north, a building strategy that reduces solar heat gain and energy consumption. Placement of the building’s amenities core to the west provides substantial bracing and allows maximum activation of the north and east street edge. A collaborative design process has resulted in an affordable commercial building with a high level of design resolution and relationship to its Brisbane context, while also challenging the traditional relationships between exterior and interior commercial space, and informed client and consultant team of allied disciplines.

CT scanning in archaeology

In this chapter we will review the use of x-ray computed tomography (CT) scanning in the field of archaeology. The story will be told in roughly chronological order, starting with the first reported use of a CT scanner in the field of archaeology and then look at some some possibilities for the future. Since the introduction of the x-ray CT scanner in the 1970’s the quality of the images has steadily improved enabling the role of the CT scanner to expand into the field of archaeology. In the context of this chapter, archaeology will be deemed to include the study of ancient human remains and artefacts but exclude remains from pre-history, which normally comes under the heading of palaeontology. (It would perhaps be appropriate to note that CT scanners have been successfully applied in the study of fossils). CT scans have mostly been used to study mummies but have also been used to examine other archaeological artefacts such as clay tablets, scrolls, pottery, bronze statues and swords.

Client intentions and Bruno Taut’s Glashaus

An often overlooked aspect concerning the Glashaus is the significant influence exerted by the client in the design of the building. In an intentional endeavour to create an exhibition pavilion that best showcased their glazed products and construction technologies, the German Luxfer Prism Syndicate both commissioned and majority financed the Glashaus. It would therefore seem strange that the official histories of the Glashaus would rather record the utopian, romanticised and arguably imagined intentions of Bruno Taut as the architect, as opposed to the reality of the client’s intentions. This paper offers a reinterpretation of the Glashaus from the perspective of German Luxfer Prism Syndicate. This reinterpretation is achieved through an investigation that primarily concentrates on the glazed areas of the Glashaus where the German Luxfer Prism Syndicates products were most evident. Using the arguments initially presented by Dietrich Neumann as a foundation, this research is additionally interwoven with inquiry into diverse aspects such as patents filed by the Luxfer group of companies and a close examination of the original black and white photographs of the Glashaus. A dramatically different understanding emerges when the Glashaus is argued from the perspective of the client; an understanding that is cold, hard and commercial as opposed to utopian and romanticised. As a result, this research makes a contribution to the current debate concerning the Glashaus and the re-evaluation of the histories of the modern movement.

Upwave cities, creative cities : the case of London

The saddest book on cities I have read in a long time is The Lost City of Stoke-on-Trent by Matthew Rice (2010). Rice, who is married to the pottery owner Emma Bridgewater, charts the long decline of the potteries since the 1970s, when many brands closed local potteries to move overseas to Indonesia. There are now only a dozen or so potteries left in Stoke and many jobs that once were there have simply vanished. Yet at one time, Stoke was a place of great wealth creation, innovation and industriousness. The lesson is that once a local economy loses its dynamism, the place itself stagnates and may even die. Stoke is to the UK what Detroit is to the USA. Rice also shows that successive attempts at urban renewal have largely failed to make any impact in reversing Stoke’s declining fortunes. Economic stagnation and decline occurs in real places, leaving multiple economic, social and cultural problems in its wake. Over a period of years, local communities and residents gradually grow poorer, as wealth leaks away to other places.

Development of a Solar Assisted Heat Pump Desalination System

In view of the growing global demand for energy and concern expressed for environmental degradation, a clean and "free" energy source, such as solar energy, has been receiving greater attention in recent years for various applications using different techniques. The Direct Expansion Solar Assisted Heat Pump (DX-SAHP) principle is one of the most promising techniques as it makes use of both solar and ambient energy. As the system has capability to function at low temperatures, it has the potential to operate at night in the tropics. The system utilizes multi-effect distillation (MED) principle for the conversion of seawater to fresh water. An experimental setup of the DX-SAHP desalination system has been built at the Department of Mechanical Engineering, National University of Singapore (NUS). This system uses two types of flat-plate solar collectors. One is called evaporator-collector, where no glazing is used, and the efficiency varies between 80 and 90%. The other type of collector is single-glazed, where the maximum efficiency is about 60%, and it is used for feed water heating. For the heat pump cycle, refrigerant R134a is used. The present study provides a comprehensive analyses and performance evaluation of this system under different operating and meteorological conditions of Singapore. The Coefficient of Performance (COP) of the heat pump system reached a maximum value of 10. For a single effect of desalination, the system shows a Performance Ratio (PR) of around 1.3.

Figure and ground

Critically responding to Heimo Zobernig's painted green carpet, a semi-permanent architectural intervention realised in the immediate aftermath of my survey show, I painted the windows of the predominantly glazed space red to effectively create a two-colour painting that envelops the viewer and adds a new dimension to the painterly tradition of hinterglasmalerei. The work created an immersive environment for viewers that aimed to promote an affectual experience through the intense saturation of the complimentary contrasts red and green.

The lily, client and measure of Bruno Taut’s Glashaus

The Glashaus is considered a significant exemplar of early modernist architecture and is generally accepted as having had Expressionist origins. However, current research has revealed that the design origins of this important building are not fully understood. While the historical record acknowledges the contributions of the bohemian poet Paul Scheerbart and the art critic Adolf Behne, the role of the Glashaus’ architect, Bruno Taut, has been moderated. In an attempt to rectify this situation this article proposes that the design origins of the Glashaus can be found in a strong architect-client interaction. It is argued that the Glashaus’ client, the Deutsche Luxfer Prismen Syndikat under the directorship of Frederick Keppler, exerted a significant influence on its design. In order to showcase the glazed products of Luxfer in the best manner possible, Keppler insisted that the design feature a glazed dome, electric lighting, a fountain as well as a cascade. Given the detailed stipulations of this brief, Taut had few options other than to offer interpretations of precedent that derived from the Victoria regia lily and Gothic proportioning. By expounding this architect-client relationship, this article expands our understanding of the Glashaus, and reinvigorates our understanding of this important early example of modern architecture.

An enhanced procedure for the rapid digestion of high silicate archeological specimens followed by ICP-MS determination of traces of rare earth elements (REE's)

A straightforward procedure for the acid digestion of geological samples with SiO2 concentrations ranging between about 40 to 80%, is described. A powdered sample (200 mesh) of 500 mg was used and fused with 1000 mg spectroflux at about 1000 degreesC in a platinum crucible. The molten was subsequently digested in an aqueous solution of HNO3 at 100 degreesC. Several systematic digestion procedures were followed using various concentrations of HNO3. It was found that a relationship could be established between the dissolution-time and acid concentration. For an acid concentration of 15% an optimum dissolution-time of under 4 min was recorded. To verify that the dissolutions were complete, they were subjected to rigorous quality control tests. The turbidity and viscosity were examined at different intervals and the results were compared with that of deionised water. No significant change in either parameter was observed. The shelf-life of each solution lasted for several months, after which time polymeric silicic acid formed in some solutions, resulting in the presence of a gelatinous solid. The method is cost effective and is clearly well suited for routine applications on a small scale, especially in laboratories in developing countries. ICP-MS was applied to the determination of 13 Rare Earth Elements and Hf in a set of 107 archaeological samples subjected to the above digestion procedure. The distribution of these elements was examined and the possibility of using the REE's for provenance studies is discussed.

Design guidance for blast-resistant glazing

This paper reviews current design standards and test methods for blast-resistant glazing design and compares a typical design outcome with that from comprehensive finite-element (FE) analysis. Design standards are conservative and are limited to the design of relatively small glazed panels. Standard test methods are expensive, create environmental pollution, and can classify the hazard ratings of only smaller glazed panels. Here the design of a laminated glass (LG) panel is carried out according to an existing design standard, and then its performance is examined using comprehensive FE modeling and analysis. Finite-element results indicate that both glass panes crack, the interlayer yields with little damage, and the sealant joints do not fail for the designed blast load. This failure pattern satisfies some of the requirements for minimal hazard rating in the design standard. It is evident that interlayer thickness and material properties are important during the post-crack stage of an LG panel, but they are not accounted for in the design standards. The new information generated in this paper will contribute toward an enhanced blast design of LG panels.