Census of Active Commercial Fishermen in Puerto Rico: 2008

The implementation of Puerto Rican Regulation No. 6768, which overhauled the existing fishery management framework, generated considerable hostility towards local managers. Among the controversial management measures adopted in 2004 were the assignment of fishing licenses based on fishing income, the establishment of closed seasons, and new minimum size restrictions for commercially valuable species. Though tensions have subsided, considerable opposition to these regulations remains. This paper provides a characterization of the current population of active small-scale fishermen, discusses their perceptions about the biological and socio-economic condition of the fishery, and describes their attitudes towards the new management framework. This study revealed that the number of active fishermen decreased from 1,731 in 1988 to 868 in 2008. Although a declining resource base was one of the main drivers behind these waning participation statistics, rising fuel costs and burdensome regulations exacerbated the rate of attrition. The majority of the fishermen were middleaged men (50 years) with moderate levels of formal education and high levels of fishing dependence which limited their employment opportunities outside the fishery. Most of the vessels were small (20 ft) and outfitted with a single outboard engine (80 hp). Hook and line and SCUBA were dominant gears because of their versatility and cost effectiveness. Fishermen suggested that their opposition to the regulations would continue unless they were afforded greater regulatory flexibility and provided with a larger role in the decision-making process. Fishermen were adamant about the need to reconsider the income reporting requirements to secure a fishing license because of the potential for losing public assistance benefits. They also objected to increasing the minimum size of many deepwater snapper (Lutjanidae) and grouper (Serranidae) species because it forced them to discard dead fish, a practice they consider wasteful since these species do not survive the ascent to the surface once hooked.

Soft Flesh in Sablefish, Anoplopoma fimbria, of Southeastern Alaska: Relationships with Depth, Season, and Biochemistry

The condition of soft-textured flesh in commercially harvested sablefish, Anoplopoma fimbria, from southeastern Alaska was investigated by National Marine Fisheries Service (NMFS) scientists from the Alaska Fisheries Science Center’s Auke Bay Laboratories (ABL) in Alaska and the Northwest Fisheries Science Center in Seattle, Wash. Sablefish were sampled by longline, pot, and trawl at five sites around Chichagof Island at depths of 259–988 m in the summer of 1985 and at depths of 259–913 m in the winter of 1986. At the time of capture and data collection, sablefish were categorized as being “firm” or “soft” by visual and tactile examination, individually weighed, measured for length, and sexed. Subsamples of the fish were analyzed and linear regressions and analyses of variance were performed on both the summer (n = 242) and winter (n = 439) data for combinations of chemical and physical analyses, depth of capture, weight vs. length, flesh condition, gonad condition, and sex. We successfully identified and selected sablefish with firm- and soft-textured flesh by tactile and visual methods. Abundance of firm fish in catches varied by season: 67% in winter and 40% in summer. Winter catches may give a higher yield than summer catches. Abundance of firm fish catches also varied with depth. Firm fish were routinely found shallower than soft fish. The highest percentage of firm fish were found at depths less than 365 m in summer and at 365–730 m in winter, whereas soft fish were usually more abundant at depths greater than 731 m. Catches of firm fish declined with increasing depth. More than 80% of the fish caught during winter at depths between 365 and 730 m had firm flesh, but this declined to 48% at these depths in summer. Longlines and pots caught similar proportions of firm and soft fish with both gears catching more firm than soft fish. Trawls caught a higher proportion of soft fish compared to longlines and pots in winter. Chemical composition of “firm” and “soft” fish differed. On average “soft” fish had 14% less protein, 12% more lipid, and 3% less ash than firm fish. Cooked yields from sablefish with soft-textured flesh were 31% less than cooked yields from firm fish. Sablefish flesh quality (firmness) related significantly to the biochemistry of white muscle with respect to 11 variables. Summer fish of all flesh conditions averaged 6% heavier than winter fish. Regulating depth of fishing could increase the yield from catches, but the feasibility and benefits from this action will require further evaluation and study. Results of this study provide a basis for reducing the harvest of sablefish with soft flesh and may stimulate further research into the cause and effect relationship of the sablefish soft-flesh phenomenon.

Government-Industry Cooperative Fisheries Research in the North Pacific under the MSFCMA

The National Marine Fisheries Service’s Alaska Fisheries Science Center (AFSC) has a long and successful history of conducting research in cooperation with the fishing industry. Many of the AFSC’s annual resource assessment surveys are carried out aboard chartered commercial vessels and the skill and experience of captains and crew are integral to the success of this work. Fishing companies have been contracted to provide vessels and expertise for many different types of research, including testing and evaluation of survey and commercial fishing gear and development of improved methods for estimating commercial catch quantity and composition. AFSC scientists have also participated in a number of industry-initiated research projects including development of selective fishing gears for bycatch reduction and evaluating and improving observer catch composition sampling. In this paper, we describe the legal and regulatory provisions for these types of cooperative work and present examples to illustrate the process and identify the requirements for successful cooperative research.

Skimmers: Their Development and Use in Coastal Louisiana

The origin, development, and utilization of the skimmer net is reviewed along with other historical shrimp gears used in coastal Louisiana. The skimmer was developed to catch white shrimp, Penaeus setiferus, observed jumping over the cork line (headrope) of trawls being worked in shallow waters. A description of the gear is presented including basic components and various frame designs used by fishermen during its development. The advantages of skimmers over bottom trawls include: multiple use as both trawl and butterfly net (wing net), ease of deployment, increased maneuverability, reduction and greater survivability of bycatch, and ability to cover more area due to increased speed and continuous fishing capability. Disadvantages may include compromising vessel stability when stored upright on the deck, possible damage to water bottoms when improperly rigged, and limitation to a 12-foot (3.6 m) maximum depth due to size restrictions. The growing popularity of the skimmer net is evident by its introduction into North Carolina and inquiries from other southeastern Atlantic and Gulf coast states.

Landing gear for a 'silent' aircraft

The Silent Aircraft Initiative aims to provide a conceptual design for a large passenger aircraft whose noise would be imperceptible above the background level outside an urban airfield. Landing gear noise presents a significant challenge to such an aircraft. 1/10th scale models have been examined with the aim of establishing a lower noise limit for large aircraft landing gear. Additionally, the landing gear has been included in an integrated design concept for the 'Silent' Aircraft. This work demonstrates the capabilities of the closed-section Markham wind tunnel and the installed phased microphone arrays for aerodynamic and acoustic measurements. Interpretation of acoustic data has been enhanced by use of the CLEAN algorithm to quantify noise levels in a repeatable way and to eliminate side lobes which result from the microphone array geometry. Results suggest that highly simplified landing gears containing only the main struts offer a 12dBA reduction from modern gear noise. Noise treatment of simplified landing gear with fairings offers a further reduction which appears to be limited by noise from the lower parts of the wheels. The importance of fine details and surface discontinuities for low noise design are also underlined.

Evaluation of the In Situ Ichthyoplankton Imaging System (ISIIS): comparison with the traditional (bongo net) sampler

Plankton and larval fish sampling programs often are limited by a balance between sampling frequency (for precision) and costs. Advancements in sampling techniques hold the potential to add considerable efficiency and, therefore, add sampling frequency to improve precision. We compare a newly developed plankton imaging system, In Situ Ichthyoplankton Imaging System (ISIIS), with a bongo sampler, which is a traditional plankton sampling gear developed in the 1960s. Comparative sampling was conducted along 2 transects ~30–40 km long. Over 2 days, we completed 36 ISIIS tow-yo undulations and 11 bongo oblique tows, each from the surface to within 10 m of the seafloor. Overall, the 2 gears detected comparable numbers of larval fishes, representing similar taxonomic compositions, although larvae captured with the bongo were capable of being identified to lower taxonomic levels, especially larvae in the small (<5 mm), preflexion stages. Size distributions of the sampled larval fishes differed considerably between these 2 sampling methods, with the size range and mean size of larval fishes larger with ISIIS than with the bongo sampler. The high frequency and fine spatial scale of ISIIS allow it to add considerable sampling precision (i.e., more vertical sections) to plankton surveys. Improvements in the ISIIS technology (including greater depth of field and image resolution) should also increase taxonomic resolution and decrease processing time. When coupled with appropriate net sampling (for the purpose of collecting and verifying the identification of biological samples), the use of ISIIS could improve overall survey design and simultaneously provide detailed, process-oriented information for fisheries scientists and oceanographers.

Home range and seasonal movements of Black Sea Bass (Centropristis striata) during their inshore residency at a reef in the mid-Atlantic Bight

Black Sea Bass (Centropristis striata) in the mid-Atlantic Bight undertake seasonal cross-shelf movements to occupy inshore rocky reefs and hardbottom habitats between spring and fall. Shelf-wide migrations of this stock are well documented, but movements and home ranges of fish during their inshore residency period have not been described. We tagged 122 Black Sea Bass with acoustic transmitters at a mid-Atlantic reef to estimate home-range size and factors that influence movements (>400 m) at a 46.1-km2 study site between May and November 2003. Activity of Black Sea Bass was greatest and most consistent during summer but declined rapidly in September as water temperatures at the bottom of the seafloor increased on the inner shelf. Black Sea Bass maintained relatively large home ranges that were fish-size invariant but highly variable (13.7–736.4 ha), underscoring the importance of large sample sizes in examination of population-level characteristics of mobile species with complex social interactions. On the basis of observed variations in movement patterns and the size of home ranges, we postulate the existence of groups of conspecifics that exhibit similar space-use behaviors. The group of males released earlier in the tagging period used larger home ranges than the group of males released later in our study. In addition, mean activity levels and the probability of movement among acoustic stations varied among groups of fish in a complex manner that depended on sex. These differences in movement behaviors may increase the vulnerability of male fish to passive fishing gears, further exacerbating variation in exploitation rates for this species among reefs.

Swimming crab Callinectes amnicola (Decapoda-Portunidae) capture analysis of a lagoon with high continental influence (Aby Lagoon, Cote d'Ivoire, West Africa)

The study describes the main causes of captures and productions decreasing of swimming crab Callinectes amnicola (Decapoda Portunidae) in Aby lagoon complex. For that, docks of two Sub Prefectures of Adiaké and Assini-Mafia respectively including the villages of Adiaké, Anga, Assomlan, Epleman, Aby and Man-Man, M'Bratty, Assini-Ngouankro and Assini-Mafia were studied from 2006 to 2009 and completed with previous results obtained from 1988 to 2005. Field investigators were identified by site/village and they recorded daily activities of fishermen (number of effective fishermen, number of gears and area of fishing, duration of fishing, types and quantity of bait) and landing of swimming crabs. During recent period of the study, total production decreased from 3742 tons in 2006 to 1500 tons in 2009. Matrix correlations and correlation analysis indicated that this downward trend was due to the increase of the number of fishermen, number of fishing gear, the decrease in female crabs capture and degradation of the environment related to gradual closure of the Assini-Mafia channel. Despite this decline, total production in Aby lagoon remained high compared to the productions of some lagoons of the country and the region. Given the importance of fishing swimming crabs in Aby lagoon, since it concerns many young people and it is a source of income, stringent measures for sustainable and responsible management must be taken and implemented as part of a co-management plan involving all stakeholders to sustainably manage the resource

Impactos negativos en las pesquerías de lisas (Pisces, Mugilidae) en Cuba de 1971 a 1995 y recomendaciones para incrementar su producción

Se presenta la situación actual de las lisas (Pisces, Mugilidae en Cuba, espacialmente respecto a los daños sufridos en sus pesquerías de 1971 a 1995. Se revisan las especies marinas presentes en aguas cubanas y sus características generales, así como las principales zonas, artes y épocas de pesca. Se presentan las capturas por regiones y se analizan los desembarques por categorías, de acuerdo con su composición por espec1e. Se revisa la Situación del grupo en los últimos años, cuyas capturas han disminuído a sólo un 5% del nivel más alto alcanzado, debido a los perjuicios ambientales de las lagunas y áreas costeras aledañas causadas por acciones antrópicas, que se describen, así como por disminuciones en el esfuerzo pesquero. Se presentan las relaciones entre las capturas y la capacidad de agua embalsada acumulada en el país, así como entre la talla media de las hembras de Mugil liza y el año en el periodo de 1981 a 1989 en la localidad históricamente más importante. Se analizan propuestas para incrementar la producción de los mugílidos en Cuba relacionadas con las pesquerías y la aplicación de técnicas de "Vallicultura integrada" como única vía para rehabilitar el medio ambiente lagunar con un balance adecuado de costo-rentabilidad. ABSTRACT The present status of the mullets (P1sces, Muglhdae),Cuba is rev1ewed, spec1ally in relation to their físhery between 1971 end 1995. The manne spec1es, Cuban waters, the1r general characterst1cs, as well as the main zonas, gears and flshmg Matons are shown. The captures by reg1ons and the landings by category and by specíes compositton are anatysed . The 11tuat10n ol the group in recent years is rev1ewed , in which the captures decreased to only 5% of the h1ghest leve! attamed due to envuonmental damages to coastal lagoons and nearby areas causad by human actions and by a lower flsh1ng effort. The retau onsh1ps are shown between captures and the country's cumulatíve capacitv of water dams, as well as that of the average s11e of Mugilliza tamales m the years between 1981 and 1989 ín the most historically important locat1on •. Proposals to mcrease mullet production in Cuba m relat1on to fisheries and establishment of "i ntegrated Vallicultura• as the only wav of restonng the tagoon environment with a good cost-benefi t balance are analysed.

Conserving oyster reef habitat by switching from dredging and tonging to diver-harvesting

A major cause of the steep declines of American oyster (Crassostrea virginica) fisheries is the loss of oyster habitat through the use of dredges that have mined the reef substrata during a century of intense harvest. Experiments comparing the efficiency and habitat impacts of three alternative gears for harvesting oysters revealed differences among gear types that might be used to help improve the sustainability of commercial oyster fisheries. Hand harvesting by divers produced 25−32% more oysters per unit of time of fishing than traditional dredging and tonging, although the dive operation required two fishermen, rather than one. Per capita returns for dive operations may nonetheless be competitive with returns for other gears even in the short term if one person culling on deck can serve two or three divers. Dredging reduced the height of reef habitat by 34%, significantly more than the 23% reduction caused by tonging, both of which were greater than the 6% reduction induced by diver hand-harvesting. Thus, conservation of the essential habitat and sustainability of the subtidal oyster fishery can be enhanced by switching to diver hand-harvesting. Management schemes must intervene to drive the change in harvest methods because fishermen will face relatively high costs in making the switch and will not necessarily realize the long-term ecological benefits.

Investigação de recursos de tunideos em Moçambique de 1975 a 1984

After 1975 a large inventory work of fisheries resources began in Mozambican waters. The tuna stocks, for instance, were virtually unexplored. After 10 years roughly, the oceanographic investigations led to the temporary localization of the most favorable areas for longline fishing or surface gears.

Avaliação dos consumos de materiais estratégicos para a conservação dos engenhos de pesca artesanal de Moçambique e Estudos de constituiçāo tipologia e distribuiçāo de alguns engenhos de pesca artesanal de Moçambique

This technical report comprises two different studies in terms of their conclusions, but based on the same field surveys: “Yearly consumption evaluation of the strategic materials for the artisanal fisheries of Mozambique” and “Constitution, typology and distribution studies of the Mozambican artisanal fishing gears”. In the first of the above studies, the amount of the materials found in each gear, the number of such gears and the wear factor “r” are subject to a computed data processing, producing the following outputs: list of materials demanded in each Mozambican fishing relevant province; list of materials demanded in the whole Mozambican territory. In the second study the observed gears constitutions are analysed and differences and similitudes among them are searched. The details of maneuver and productivity are referred as well. Attention is drawn to the fact that observations did not take place on the whole Mozambican territory, even not in the most representative but in some considerably important fishing centers with reasonable safety and connection facilities. About the first study, when it was not possible to reach such considerably important centers the determination of the approximate picture of them has been achieved by verbal information of people knowing them very well and by the sources referred here in after. Concerning the second study inferences have not been made. Although a limited number of samples has been collected, the accuracy of it has been checked by inquiry. Speculations have been developed only on observed cases. The surveys have been made by a team, assigned by the directors of UD-PPE and Equipesca, under author’s coordination.

Fichas analiticas dos equipamentos de pesca

The cards reproduced herewith are the direct result of the field surveys and have been the basic documents for the computed yearly strategic materials needs evaluation. They are presented due to the fundamental role played by them and due to their helpfulness regarding different nature studies, such as investment and maintenance costs determination, in terms of imported materials of the artisanal fishing gears of Mozambique.

On the use of different natural baits for sea-fishing in India

Rod and line, hand-line, trolling line and fish-traps are the different types of fishing gears wherein suitable fish baits are employed with a view to luring the catch. The coastal fishermen of India mostly use different types of natural fish-baits to catch fishes like Perches, Carangids, Sciaenids, Scombroids and Elasmobranchs. The reactions of the fishes caught to the different baits used are quite varied. Successful line fishing operations very much depend on the fish-baits. A detailed record of the variety of fishes caught, types of fishing and different baits used by the coastal fishermen of India has been made.

Fishing gear and methods of the river Brahmaputra in Assam

Potentially the inland fishery resources of the country are of very high order. But the present level of their exploitation is far from optimum, mainly because of the inadequacies of the existing fishing gear and methods. There is vast scope for increasing the fish production from inland waters by improving the existing gear and methods. This would require a thorough study of the fishing gear and methods in vogue, of which very little is known at present. In the present communication the authors discuss the fishing gear and methods of the river Brahmaputra, in Assam, based on a survey carried out by them during January-February 1964. The survey covers a 640 km stretch of the Brahmaputra River, its important tributaries and connected bheels, from Dhubri to Dibrugarh. As a result of the survey about 19 types of fishing nets, which could be grouped into eight classes, were identified. The salient technological features of the gears and their methods of operation are discussed class-wise. The characteristics of the individual types are shown in tables. The materials used for gear and gear accessories, are briefly discussed. The classification and relative importance of different types of gear are examined. Besides, the influence of the ecological and topographical features of the river on the development of different types of fishing gears, is also discussed.