Length-frequency estimation for yellowfin tuna (Thunnus albacares) caught by commercial fishing gear in the Eastern Pacific Ocean

ENGLISH: Methods of collecting samples for the purpose of estimating the numbers and weights of fish caught, by length interval, are described. Several models for two-stage sampling are described, and the equations for the estimators and their variances are given. The results from a brief simulation study are used to show the differences between estimates made with the different models. Estimators for the average weights of fish in the catch and their variances are also described. These average weights are used to provide improved estimates of the total annual catches of yellowfin taken from the eastern Pacific Ocean, east of 150°W, between 1955 and 1990. SPANISH: Se describen los métodos de recoger de muestreo para estimar el número o peso de peces capturados, por intervalo de talla. Se describen varios modelos para el muestreo de dos etapas, y se presentan las ecuaciones para los estimadores y sus varianzas. Se usan los resultados de un breve estudio de simulación para indicar las diferencias entre estimaciones realizadas con los distintosmodelos. También se describe un estimador para el peso promedio de peces en la captura y su varianza. Se usan estos estimadores para calcular estimaciones mejoradas de las capturas anuales totales de aleta amarilla tomadas del Océano Pacífico oriental, al este de 150°W, entre 1955 y 1990. (PDF contains 41 pages.)

Fishing gear survey of Lake Alau

This report briefly documents the fishing gear commonly used by local fishers in Lake Alau (Nigeria). Five types of gears are described: gill-net, cast net, Gura trap, longlines, and Clap net

An overview of the Clupeid fishing gear of Kainji Lake

Fishing gears and methods that target the Clupeids are atalla lift net, light attraction, midwater trawl and dala (Clupeid beach seine).Dala fisheries have been the most lucrative fishing gear on Clupeids within the recent past. However, it has been declared as 100% illegal gear having a mesh size of 0.1 mm, because it catches indiscriminately undersized (juveniles/larvae) commercial fish. The ban on the gear was therefore mounted through promulgation and implementation of special fisheries laws for Kainji Lake (Nigeria). Although, the use of Dala fishing gear and method has decreased due to this management approach, its use is currently increased again. It is therefore suggested that the ban on the use of Dala may not be the answer to indiscriminate fisheries, but modification of the gear and methods for harvesting Clupeids should be the main objective

Selectivity of three aquatic weeds as diet for Nile tilapia (Oreochromis niloticus)

A total of sixty juvenile Oreochromis niloticus (Nile tilapia) were fed three species of aquatic weed, namely Azolla filiculoides (water fern), Elodea sp. and Pistia stratiotes (water lettuce) to determine which of the weeds will be selectively consumed, and preferred of all. A control group of twenty Nile tilapia was fed compounded feed. The selectivity of the weeds was observed based on their utilization as food source, and Azolla filiculoides was found to be highly utilized, followed by Elodea sp. and the roots of Pistia stratiotes. The growth response of the fish to the diets was found to be highest for fish fed compounded feed followed by Azolla filiculoides and Elodea sp., while Pistia stratiotes produced a negative growth trend. It is therefore postulated that Azolla filiculoides and Pista sp. are good feedstuffs for O. niloticus especially when used together with other feedstuffs

The use and economic benefits of fibres from sisal hemp (Agave sisalana) leaves as supporting ropes for fishing gear

Sisal hemp (Agave sisalana) leaves were harvested and processed using the beating and decomposition methods. The fibres obtained were washed, dried and finally spurned in to cordage of about 4mm diameter 39 pieces of ropes, each measuring 2 meters were altogether spurned. 30 pieces of these ropes were immersed in water for a period of 24 weeks, 6 were placed in a shaded and airily place and 3 were used for the head and footling of gillnet, sinker line of cast net and the main line of long line. Every other week, the ropes in water and air were tested for its breaking strength using an improved 50kg spring balance. At the end of the experiment, it was found the immersed ropes maintained a tensile strength of over 50kg/F for the first 18 weeks, thereafter; there was a gradual weekly reduction in the strength until the 23rd week when the tensile strength was less than 1kg/F. The cost benefit analysis showed that about 5,3146 tons processed fibers could be obtained fro 1ha. capable of being spenced in to 528300m of 4mm diameter cordage. This paper finally recommended the growth of sisal hemp plants by fisher folks so that there will be constant stock for intermittent harvesting for rope spurning

COLOR-HOLOGRAPHY USING THE ANGULAR SELECTIVITY OF VOLUME RECORDING MEDIA

A display hologram of an object can be recorded and reconstructed in three primary colors if the angular selectivity of volume recording media is exploited. Three holograms are recorded in the same medium, each at a different primary color. These three holograms are reconstructed by simultaneous illumination of the hologram with the original reference beams. By proper choice of the angles that the reference beams make to the hologram, it is possible to suppress strongly cross talk between the different reconstructions (e.g., the red object reconstruction in green light). The technique exhibits high resolution, high diffraction efficiency, and vivid colors. Through the addition of three holographically recorded volume gratings it is possible to reconstruct the hologram with a beam of white light. The saturation and brightness of each primary color in the reconstruction can be adjusted by selection of an appropriate thickness for the corresponding grating.

Fishing gear survey of Kainji Lake, northern Nigeria, 1996

A survey was carried out in September 1996 alongside the annual frame survey of Kainji Lake, Nigeria. As in the previous surveys, there were 6 main fishing gear types in use on the lake, which included gill nets, drift nets, beach seines, cast nets, longlines (baited and foul hooking) acid fishing traps. A total of 813 canoes were sampled. The canoe lengths were similar to the previous gear surveys. Altogether 466 gill nets were measured. They had an average length of 149 m, and were mostly bottom set. Of the gill nets measured 68% had a mesh size below 3 inches the minimum mesh size allowable according to the Niger and Kebbi State Fisheries Edict, 1996. Of concern was the large increase in the number of 1 inch meshed nets recorded on the lake. Drift nets had a mean length of 74 m. A total of 88% of all drift nets measured had a mesh size below 2.5 inches, the minimum mesh size stipulated in the State Edict. A total number of 102 beach seines were sampled with a mean length of 110 m, the mesh size in use on the lake remained as 0.1 inches under the Edict beach seines are banned from fishing in Kainji Lake. The decline in the lengths of the beach seines (and therefore catch rates) recorded since l995 was encouraging in the light of the destructive nature of these nets. A total of 30 cast nets were sampled, they had a mean diameter of 9.8 and a mean mesh size of 1.9 inches. All the nets had a hanging ratio of 0.5. Of the cast nets measured 40% had a mesh size below the minimum size of 2 inches recommended by the State Fisheries Edicts. Of concern was the continued rise in the number of gill nets with mesh sizes less than 2 inches. There were 2 types of longlines in operation on the lake. The baited and the foul hooking longlines. They were mostly bottom set and the hook size nos. 12-14 (Kirby sea hook) were predominant. Two types of fishing traps were identified, one was covered with a mesh of thin cane, one with netting material. The fishing traps had a mean height of 0.8 m and a mean width at the vase of 0.53 m. The mean mesh size used was 0.86 inches. Citharinus was reported as the most targeted of all fish species on the lake. Synodontis membranaceous was also targeted by most gears especially the smaller meshed nets. Labeo and Tilapia were low on the list of targeted species but their incidence remains high in the catches. (PDF contains 27 pages)

The cast net fishery, Kainji Lake, Nigeria 1970-1997

This study was carried out to establish trends in the cast net fishery of Kainji Lake, Nigeria. The cast net fishery was second in importance to the gillnet fishery in the early years after impoundment of the lake and still continues to be an important component of the fishery. Some of the economically important species such as Citharinus spp, Tilapia spp, Labeo spp, Alestes spp and Synodontis spp are exploited by cast nets. The study has not revealed any drastic perturbation in the species diversity, catch composition, and any real ecosystem overfishing. On the other hand, both the catfish, Auchenoglanis spp and the predator Hydrocynus spp appear to have increased in the catch in recent years. Never-the-less there is a decline in the mean weight of the major exploited fish species due to the capture of under sized fishes without allowing them to grow to 'legally' marketable sizes. The use of small meshed cast net and also fishing in the shallow waters of the lake can give rise to this situation. Thus, there are signs of growth overfishing in the fish stocks. It must also be acknowledged that the situation is complicated by the fact that in a multi-gear fishery as on Kainji Lake, the cast net fishery could not be managed in isolation without due regard to the other competing gears. The catch per unit of effort (CPUE) has declined in the cast net fishery possibly due to the increase in effort by the major fishing gears over the years. The ongoing extension campaigns by the KLFPP appears to be having the desired effect, as there was reduction in the number of the major fishing gears on the Lake in 1997. It can be anticipated that if this trend continues, the CPUE will recover in the long run. Yields observed from the mesh selectivity study revealed that for major species in the cast net fishery, both by number and weight, were maximal at 2.5 inch mesh, which contrasts with the fact that current minimum allowable mesh in the Fisheries Edict for the Lake is 2.0 inch. The adoption of 2.5 inch as the minimum allowable mesh in the cast net fishery is recommended to be included in future revision of existing regulations. It is also recommended that for this control to have a desired effect, the casting of the net from the shore should be prohibited so as to reduce the incidence of juvenile mortality in the nursery areas. (PDF contains 28 pages)

Marketing of fishing gear materials and fishing gear making in parts of Kainji Lake basin

The importance of fishing gear in fishing cannot be over-emphasized; as without it fish cannot be obtained. The method used to catch fish affects the condition in which the product is landed. This means that a bad-catching method would produced bad fish to the consumer. To achieve the goal of self-sufficiency in fish production in Nigeria, there is need to address the lingering problems of fishing gear and craft technology, especially in terms of availability of materials and their cost. The sale and making of fishing gear materials are two areas of fisheries, which are yet to be exploited by the general public as forms of businesses for livelihood. The study is conducted in villages around the lower part of Kainji Lake, towards the dam, including New Bussa. It reveals that only the fishermen themselves are involved in making their own fishing gears while those involved in the selling of fishing gear materials like the sheet netting, ropes, twines, floats, sinkers etc are business men and women who may not have any experience of fishing. Also considered in the study is the art of making fishing crafts like the canoe and gourd. Very few entrepreneurs are involved and they are so skilled that each is specialized in the making of only one kind of craft or gear

Selectivity, activity, and stability of ruthenium-carbene based olefin metathesis initiators

The olefin metathesis reaction has found many applications in polymer synthesis and more recently in organic synthesis. The use of single component late metal olefin metathesis catalysts has expanded the scope of the reaction to many new applications and has allowed for detailed study of the catalytic species.

The metathesis of terminal olefins of different steric bulk, different geometry as well as electronically different para-substituted styrenes was studied with the ruthenium based metathesis initiators, trans-(PCy₃)₂Cl₂Ru=CHR, of different carbene substituents. Increasing olefin bulk was found to slow the rate of reaction and trans internal olefins were found to be slower to react than cis internal olefins. The kinetic product of a11 reactions was found to be the alkylidene, rather than the methylidene, suggesting the intermediacy of a 2,4-metallacycle. The observed effects were used to explain the mechanism of ring opening cross metathesis and acyclic diene metathesis polymerization. No linear electronic effects were observed.

In studying the different carbene ligands, a series of ester-carbene complexes was synthesized. These complexes were found to be highly active for the metathesis of olefinic substrates, including acrylates and trisubstituted olefins. In addition, the estercarbene moiety is thermodynamically high in energy. As a result, these complexes react to ring-open cyclohexene by metathesis to alleviate the thermodynamic strain of the ester-carbene ligand. However, ester-carbene complexes were found to be thermolytically unstable in solution.

Thermolytic decomposition pathways were studied for several ruthenium-carbene based olefin metathesis catalysts. Substituted carbenes were found to decompose through bimolecular pathways while the unsubstituted carbene (the methylidene) was found to decompose unimolecularly. The stability of several derivatives of the bis-phosphine ruthenium based catalysts was studied for its implications to ring-closing metathesis. The reasons for the activity and stability of the different ruthenium-based catalysts is discussed.

The difference in catalyst activity and initiation is discussed for the bis-phosphine based and mixed N-heterocyclic carbene/phosphine based ruthenium olefin metathesis catalysts. The mixed ligand catalysts initiate far slower than the bis-phosphine catalysts but are far more metathesis active. A scheme is proposed to explain the difference in reactivity between the two types of catalysts.

Feeding selectivity of brown trout (Salmo trutta) in Loch Ness, Scotland

The aim of this study was to compare statistically the zooplankton assemblage ingested by brown trout (Salmo trutta) in Loch Ness with that of the zooplankton in the water column. This would allow the examination of the apparent paradox that very few copepods appear to be consumed by trout at a time of year when they are numerous and readily available as food. The investigation was limited to the crustacean zooplankters, since the Rotifera are generally so small that they are only of interest to fish in the first few days of life. 25 trout were obtained from anglers, and the stomach contents of non-"ferox" animals analysed. Samples of pelagic zooplankton were obtained approximately monthly from 30-m vertical net-hauls (mesh size 100 km). It is concluded that the variation in dietary composition with trout wet weight indicates an ontogenetic habitat shift producing spatial separation of young and older individuals.

Selectivity of gillnets for Nile perch, Lates niloticus (L.), in Lake Victoria, Kenya

Four fleets of hanging coefficients 0.2, 0.4, 0.6 and 0.8 were used to determine size selectivity and selection factors of Nile perch populations. There was a linear relationship between mesh size and modal length of capture. Positively skewed length frequency distributions were found for smaller mesh sizes with entanglement becoming more prominent in mesh sizes above 101 mm. Nets of 114 to 141 mm stretched mesh yielded higher economic returns than small meshes, the catch consisting of few largefish.

The ionic basis of frequency selectivity in hair cells of the bullfrog's sacculus

Hair cells from the bull frog's sacculus, a vestibular organ responding to substrate-borne vibration, possess electrically resonant membrane properties which maximize the sensitivity of each cell to a particular frequency of mechanical input. The electrical resonance of these cells and its underlying ionic basis were studied by applying gigohm-seal recording techniques to solitary hair cells enzymatically dissociated from the sacculus. The contribution of electrical resonance to frequency selectivity was assessed from microelectrode recordings from hair cells in an excised preparation of the sacculus.

Electrical resonance in the hair cell is demonstrated by damped membrane-potential oscillations in response to extrinsic current pulses applied through the recording pipette. This response is analyzed as that of a damped harmonic oscillator. Oscillation frequency rises with membrane depolarization, from 80-160 Hz at resting potential to asymptotic values of 200-250 Hz. The sharpness of electrical tuning, denoted by the electrical quality factor, Q_e, is a bell-shaped function of membrane voltage, reaching a maximum value around eight at a membrane potential slightly positive to the resting potential.

In whole cells, three time-variant ionic currents are activated at voltages more positive than -60 to -50 mV; these are identified as a voltage-dependent, non-inactivating Ca current (I_ca), a voltage-dependent, transient K current (I_a), and a Ca-dependent K current (I_c). The C channel is identified in excised, inside-out membrane patches on the basis of its large conductance (130-200 pS), its selective permeability to Kover Na or Cl, and its activation by internal Ca ions and membrane depolarization. Analysis of open- and closed-lifetime distributions suggests that the C channel can assume at least two open and three closed kinetic states.

Exposing hair cells to external solutions that inhibit the Ca or C conductances degrades the electrical resonance properties measured under current-clamp conditions, while blocking the A conductance has no significant effect, providing evidence that only the Ca and C conductances participate in the resonance mechanism. To test the sufficiency of these two conductances to account for electrical resonance, a mathematical model is developed that describes I_ca, I_c, and intracellular Ca concentration during voltage-clamp steps. I_ca activation is approximated by a third-order Hodgkin-Huxley kinetic scheme. Ca entering the cell is assumed to be confined to a small submembrane compartment which contains an excess of Ca buffer; Ca leaves this space with first-order kinetics. The Ca- and voltage-dependent activation of C channels is described by a five-state kinetic scheme suggested by the results of single-channel observations. Parameter values in the model are adjusted to fit the waveforms of I_ca and I_c evoked by a series of voltage-clamp steps in a single cell. Having been thus constrained, the model correctly predicts the character of voltage oscillations produced by current-clamp steps, including the dependencies of oscillation frequency and Q_e on membrane voltage. The model shows quantitatively how the Ca and C conductances interact, via changes in intracellular Ca concentration, to produce electrical resonance in a vertebrate hair cell.

Fishing gear experiments in Finland

A comparison of some different European methods of estimating the numbers of fish in a lake using different fishing gear is described. The different gears used were 1. surface trawl used by night 2. bottom trawl used by day 3. trammel nets, set in the evening and lifted in the morning 4. surface seine net used by night 5. bottom seine net used by day 6. Fyke nets, emptied each morning and evening 7. gill nets, set in the evening and lifted in the morning. The most variable catches were from those gears used by day on the bottom and the least variable were those used by night at the surface. The work continued by examining the use of acoustic systems for pelagic fish stock assessment. This gear gave reasonable population estimates for pelagic fish 10m and more below the surface. The advantage of the accoustic method is that it is quick and requires little labour. Its disadvantage is that it is not possible to identify the species and so it must be supplemented by another, conventional method.