Workflow-oriented collaborative grid portals

The paper presents how workflow-oriented, single-user Grid portals could be extended to meet the requirements of users with collaborative needs. Through collaborative Grid portals different research and engineering teams would be able to share knowledge and resources. At the same time the workflow concept assures that the shared knowledge and computational capacity is aggregated to achieve the high-level goals of the group. The paper discusses the different issues collaborative support requires from Grid portal environments during the different phases of the workflow-oriented development work. While in the design period the most important task of the portal is to provide consistent and fault tolerant data management, during the workflow execution it must act upon the security framework its back-end Grids are built on.

Femtosecond evolution of spatially inhomogeneous carrier excitations: part 2: stochastic approach and GRID implementation

We present a stochastic approach for solving the quantum-kinetic equation introduced in Part I. A Monte Carlo method based on backward time evolution of the numerical trajectories is developed. The computational complexity and the stochastic error are investigated numerically. Variance reduction techniques are applied, which demonstrate a clear advantage with respect to the approaches based on symmetry transformation. Parallel implementation is realized on a GRID infrastructure.

The collaborative P-GRADE grid portal

Grid portals are increasingly used to provide uniform access to the grid infrastructure. This paper describes how the P-GRADE Grid Portal could be used in a collaborative manner to facilitate group work and support the notion of Virtual Organisations. We describe the development issues involved in the construction of a collaborative portal, including ensuring a consistent view between participants of a collaborative workflow and management of proxy credentials to allow separate nodes of the workflow to be submitted to different grids.

Security Issues in a SOA-based Provenance System

Recent work has begun exploring the characterization and utilization of provenance in systems based on the Service Oriented Architecture (such as Web Services and Grid based environments). One of the salient issues related to provenance use within any given system is its security. In a broad sense, security requirements arise within any data archival and retrieval system, however provenance presents unique requirements of its own. These requirements are additionally dependent on the architectural and environmental context that a provenance system operates in. We seek to analyze the security considerations pertaining to a Service Oriented Architecture based provenance system. Towards this end, we describe the components of such a system and illustrate the security considerations that arise within it. Concurrently, we outline possible approaches to address them.

Microinsurance: income risk, social security and the demand for private onsurance by low-income families

Insurance provision against uncertainties is present in several dimensions of peoples´s lives, such as the provisions related to, inter alia, unemployment, diseases, accidents, robbery and death. Microinsurance improves the ability of low-income individuals to cope with these risks. Brazil has a fairly developed financial system but still not geared towards the poor, especially in what concerns the insurance industry. The evaluation of the microinsurance effects on well-being, and the demand for different types of microinsurance require an analysis of the dynamics of the individual income process and an assessment of substitutes and complementary institutions that condition their respective financial behavior. The evaluation of the microinsurance effects on well-being, and the demand for different types of microinsurance require an analysis of the dynamics of the individual income process and an assessment of substitutes and complementary institutions that condition their respective financial behavior. The Brazilian government provides a relatively developed social security system considering other countries of similar income level which crowds-out the demand for insurance and savings. On the other hand, this same public infrastructure may help to foster microfinance products supply. The objective of this paper is to analyze the demand for different types of private insurance by the low-income population using microdata from a National Expenditure Survey (POF/IBGE). The final objective is to help to understand the trade-offs faced for the development of an emerging industry of microinsurance in Brazil.

Maritime and port security in South America: the situation in mid-2004

The current issue of the Bulletin is based on a document prepared by the ECLAC Transport Unit, Natural Resources and Infrastructure Division, on maritime and port security in South America: implementation of measures, general status as of mid-2004 (in Spanish only). This is a joint activity of the Technical Coordination Committee of the presidential initiative for Regional Infrastructure Integration in South America (IIRSA) and ECLAC. This document served as an input for a meeting on this subject held by representatives of the authorities of South American countries in Montevideo, Uruguay, on 22 June 2004. In this issue the results are presented of two recent surveys conducted by the users, operators and governmental authorities of the region on the new maritime and port security measures of the International Maritime Organization (IMO). An effort was made, on the one hand, to ascertain the existing level of awareness of the measures and the perceptions of impact, the potential costs and responsibility for the cost of the measures, and on the other hand to ascertain the degree of progress in their implementation, for which the deadline was 1 July 2004.

Maritime and port security in South America: implementation costs

This edition of the Bulletin is based on a document prepared by ECLAC and the Technical Coordination Committee of the presidential initiative for Regional Infrastructure Integration in South America (IIRSA), which is composed of the Inter-American Development Bank (IDB), the Andean Development Corporation (ADC) and the Financial Fund for the Development of the River Plate Basin (FONPLATA). The document was prepared as a joint activity on maritime and port security in South America in the context of the IIRSA sectoral integration process in relation to operational systems for maritime transport. It served as an input for the meeting on that subject held by representatives of the authorities of the South American countries in Montevideo, Uruguay, on 22 June 2004.This edition presents the results of the implementation cost assessment for the new compulsory regulations for maritime and port security of the International Maritime Organization (IMO) and also considers the costs of the voluntary measures.

Análise de desempenho de redes de comunicação wireless em aplicações de Smart Grid

Pós-graduação em Engenharia Elétrica - FEIS

O papel dos consumidores residencias no ambiente das redes inteligentes: medidores eletrônicos de energia

Pós-graduação em Engenharia Mecânica - FEG

Security control brought back to the user

The activity of the Ph.D. student Juri Luca De Coi involved the research field of policy languages and can be divided in three parts. The first part of the Ph.D. work investigated the state of the art in policy languages, ending up with: (i) identifying the requirements up-to-date policy languages have to fulfill; (ii) defining a policy language able to fulfill such requirements (namely, the Protune policy language); and (iii) implementing an infrastructure able to enforce policies expressed in the Protune policy language. The second part of the Ph.D. work focused on simplifying the activity of defining policies and ended up with: (i) identifying a subset of the controlled natural language ACE to express Protune policies; (ii) implementing a mapping between ACE policies and Protune policies; and (iii) adapting the ACE Editor to guide users step by step when defining ACE policies. The third part of the Ph.D. work tested the feasibility of the chosen approach by applying it to meaningful real-world problems, among which: (i) development of a security layer on top of RDF stores; and (ii) efficient policy-aware access to metadata stores. The research activity has been performed in tight collaboration with the Leibniz Universität Hannover and further European partners within the projects REWERSE, TENCompetence and OKKAM.

Assessing Food Security in Selected Mediterranean Countries

Food Security has become an important issue in the international debate, particularly during the latest economic crisis. It relevant issue also for the Mediterranean Countries (MCs), particularly those of the southern shore, as they are is facing complex economic and social changes. On the one hand there is the necessity to satisfy the increasing and changing food demand of the growing population; on the other hand it is important to promote economic growth and adjust the agricultural production to food demand in a sustainable perspective. The assessment of food security conditions is a challenging task due to the multi-dimensional nature and complexity of the matter. Many papers in the scientific literature focus on the nutritional aspects of food security, while its economic issues have been addressed less frequently and only in recent times. Thus, the main objective of the research is to assess food (in)security conditions in the MCs. The study intends to identify and implement appropriate theoretical concepts and methodological tools to be used in the assessment of food security, with a particular emphasis on its economic dimension within MCs. The study follows a composite methodological approach, based on the identification and selection of a number of relevant variables, a refined set of indicators is identified by means of a two-step Principal Component Analysis applied to 90 countries and the PCA findings have been studied with particular attention to the MCs food security situation. The results of the study show that MCs have an higher economic development compared to low-income countries, however the economic and social disparities of this area show vulnerability to food (in)security, due to: dependency on food imports, lack of infrastructure and agriculture investment, climate condition and political stability and inefficiency. In conclusion, the main policy implications of food (in)security conditions in MCs are discussed.

Evaluation of a cloud infrastructure for the CMS distributed data analysis in the top quark sector at the LHC

Nella fisica delle particelle, onde poter effettuare analisi dati, è necessario disporre di una grande capacità di calcolo e di storage. LHC Computing Grid è una infrastruttura di calcolo su scala globale e al tempo stesso un insieme di servizi, sviluppati da una grande comunità di fisici e informatici, distribuita in centri di calcolo sparsi in tutto il mondo. Questa infrastruttura ha dimostrato il suo valore per quanto riguarda l'analisi dei dati raccolti durante il Run-1 di LHC, svolgendo un ruolo fondamentale nella scoperta del bosone di Higgs. Oggi il Cloud computing sta emergendo come un nuovo paradigma di calcolo per accedere a grandi quantità di risorse condivise da numerose comunità scientifiche. Date le specifiche tecniche necessarie per il Run-2 (e successivi) di LHC, la comunità scientifica è interessata a contribuire allo sviluppo di tecnologie Cloud e verificare se queste possano fornire un approccio complementare, oppure anche costituire una valida alternativa, alle soluzioni tecnologiche esistenti. Lo scopo di questa tesi è di testare un'infrastruttura Cloud e confrontare le sue prestazioni alla LHC Computing Grid. Il Capitolo 1 contiene un resoconto generale del Modello Standard. Nel Capitolo 2 si descrive l'acceleratore LHC e gli esperimenti che operano a tale acceleratore, con particolare attenzione all’esperimento CMS. Nel Capitolo 3 viene trattato il Computing nella fisica delle alte energie e vengono esaminati i paradigmi Grid e Cloud. Il Capitolo 4, ultimo del presente elaborato, riporta i risultati del mio lavoro inerente l'analisi comparata delle prestazioni di Grid e Cloud.

Increasing Utilization of US Electric Grids via Smart Technologies: Integration of Load Management, Real Time Pricing, Renewables, EVs and Smart Grid Sensors

Electric power grids throughout the world suffer from serious inefficiencies associated with under-utilization due to demand patterns, engineering design and load following approaches in use today. These grids consume much of the world’s energy and represent a large carbon footprint. From material utilization perspectives significant hardware is manufactured and installed for this infrastructure often to be used at less than 20-40% of its operational capacity for most of its lifetime. These inefficiencies lead engineers to require additional grid support and conventional generation capacity additions when renewable technologies (such as solar and wind) and electric vehicles are to be added to the utility demand/supply mix. Using actual data from the PJM [PJM 2009] the work shows that consumer load management, real time price signals, sensors and intelligent demand/supply control offer a compelling path forward to increase the efficient utilization and carbon footprint reduction of the world’s grids. Underutilization factors from many distribution companies indicate that distribution feeders are often operated at only 70-80% of their peak capacity for a few hours per year, and on average are loaded to less than 30-40% of their capability. By creating strong societal connections between consumers and energy providers technology can radically change this situation. Intelligent deployment of smart sensors, smart electric vehicles, consumer-based load management technology very high saturations of intermittent renewable energy supplies can be effectively controlled and dispatched to increase the levels of utilization of existing utility distribution, substation, transmission, and generation equipment. The strengthening of these technology, society and consumer relationships requires rapid dissemination of knowledge (real time prices, costs & benefit sharing, demand response requirements) in order to incentivize behaviors that can increase the effective use of technological equipment that represents one of the largest capital assets modern society has created.

Parameter estimation for transformer modeling

Large Power transformers, an aging and vulnerable part of our energy infrastructure, are at choke points in the grid and are key to reliability and security. Damage or destruction due to vandalism, misoperation, or other unexpected events is of great concern, given replacement costs upward of $2M and lead time of 12 months. Transient overvoltages can cause great damage and there is much interest in improving computer simulation models to correctly predict and avoid the consequences. EMTP (the Electromagnetic Transients Program) has been developed for computer simulation of power system transients. Component models for most equipment have been developed and benchmarked. Power transformers would appear to be simple. However, due to their nonlinear and frequency-dependent behaviors, they can be one of the most complex system components to model. It is imperative that the applied models be appropriate for the range of frequencies and excitation levels that the system experiences. Thus, transformer modeling is not a mature field and newer improved models must be made available. In this work, improved topologically-correct duality-based models are developed for three-phase autotransformers having five-legged, three-legged, and shell-form cores. The main problem in the implementation of detailed models is the lack of complete and reliable data, as no international standard suggests how to measure and calculate parameters. Therefore, parameter estimation methods are developed here to determine the parameters of a given model in cases where available information is incomplete. The transformer nameplate data is required and relative physical dimensions of the core are estimated. The models include a separate representation of each segment of the core, including hysteresis of the core, λ-i saturation characteristic, capacitive effects, and frequency dependency of winding resistance and core loss. Steady-state excitation, and de-energization and re-energization transients are simulated and compared with an earlier-developed BCTRAN-based model. Black start energization cases are also simulated as a means of model evaluation and compared with actual event records. The simulated results using the model developed here are reasonable and more correct than those of the BCTRAN-based model. Simulation accuracy is dependent on the accuracy of the equipment model and its parameters. This work is significant in that it advances existing parameter estimation methods in cases where the available data and measurements are incomplete. The accuracy of EMTP simulation for power systems including three-phase autotransformers is thus enhanced. Theoretical results obtained from this work provide a sound foundation for development of transformer parameter estimation methods using engineering optimization. In addition, it should be possible to refine which information and measurement data are necessary for complete duality-based transformer models. To further refine and develop the models and transformer parameter estimation methods developed here, iterative full-scale laboratory tests using high-voltage and high-power three-phase transformer would be helpful.