Computer-assisted, fluoroscopy-based ventral spondylodesis of thoracolumbar fractures

OBJECTIVE: To design and evaluate a novel computer-assisted, fluoroscopy-based planning and navigation system for minimally invasive ventral spondylodesis of thoracolumbar fractures. MATERIALS AND METHODS: Instruments and an image intensifier are tracked with the SurgiGATE navigation system (Praxim-Medivision). Two fluoroscopic images, one acquired from anterior-posterior (AP) direction and the other from lateral-medial (LM) direction, are used for the complete procedure of planning and navigation. Both of them are calibrated with a custom-made software to recover their projection geometry and to co-register them to a common patient reference coordinate system, which is established by attaching an opto-electronically trackable dynamic reference base (DRB) on the operated vertebra. A bi-planar landmark reconstruction method is used to acquire deep-seated anatomical landmarks such that an intraoperative planning of graft bed can be interactively done. Finally, surgical actions such as the placement of the stabilization devices and the formation of the graft bed using a custom-made chisel are visualized to the surgeon by superimposing virtual instrument representations onto the acquired images. The distance between the instrument tip and each wall of the planned graft bed are calculated on the fly and presented to the surgeon so that the surgeon could formalize the graft bed exactly according to his/her plan. RESULTS: Laboratory studies on phantom and on 27 plastic vertebras demonstrate the high precision of the proposed navigation system. Compared with CT-based measurement, a mean error of 1.0 mm with a standard deviation of 0.1 mm was found. CONCLUSIONS: The proposed computer assisted, fluoroscopy-based planning and navigation system promises to increase the accuracy and reliability of minimally invasive ventral spondylodesis of thoracolumbar fractures.

Development of an optimization model for biofuel facility size and location and a simulation model for design of a biofuel supply chain

To mitigate greenhouse gas (GHG) emissions and reduce U.S. dependence on imported oil, the United States (U.S.) is pursuing several options to create biofuels from renewable woody biomass (hereafter referred to as “biomass”). Because of the distributed nature of biomass feedstock, the cost and complexity of biomass recovery operations has significant challenges that hinder increased biomass utilization for energy production. To facilitate the exploration of a wide variety of conditions that promise profitable biomass utilization and tapping unused forest residues, it is proposed to develop biofuel supply chain models based on optimization and simulation approaches. The biofuel supply chain is structured around four components: biofuel facility locations and sizes, biomass harvesting/forwarding, transportation, and storage. A Geographic Information System (GIS) based approach is proposed as a first step for selecting potential facility locations for biofuel production from forest biomass based on a set of evaluation criteria, such as accessibility to biomass, railway/road transportation network, water body and workforce. The development of optimization and simulation models is also proposed. The results of the models will be used to determine (1) the number, location, and size of the biofuel facilities, and (2) the amounts of biomass to be transported between the harvesting areas and the biofuel facilities over a 20-year timeframe. The multi-criteria objective is to minimize the weighted sum of the delivered feedstock cost, energy consumption, and GHG emissions simultaneously. Finally, a series of sensitivity analyses will be conducted to identify the sensitivity of the decisions, such as the optimal site selected for the biofuel facility, to changes in influential parameters, such as biomass availability and transportation fuel price. Intellectual Merit The proposed research will facilitate the exploration of a wide variety of conditions that promise profitable biomass utilization in the renewable biofuel industry. The GIS-based facility location analysis considers a series of factors which have not been considered simultaneously in previous research. Location analysis is critical to the financial success of producing biofuel. The modeling of woody biomass supply chains using both optimization and simulation, combing with the GIS-based approach as a precursor, have not been done to date. The optimization and simulation models can help to ensure the economic and environmental viability and sustainability of the entire biofuel supply chain at both the strategic design level and the operational planning level. Broader Impacts The proposed models for biorefineries can be applied to other types of manufacturing or processing operations using biomass. This is because the biomass feedstock supply chain is similar, if not the same, for biorefineries, biomass fired or co-fired power plants, or torrefaction/pelletization operations. Additionally, the research results of this research will continue to be disseminated internationally through publications in journals, such as Biomass and Bioenergy, and Renewable Energy, and presentations at conferences, such as the 2011 Industrial Engineering Research Conference. For example, part of the research work related to biofuel facility identification has been published: Zhang, Johnson and Sutherland [2011] (see Appendix A). There will also be opportunities for the Michigan Tech campus community to learn about the research through the Sustainable Future Institute.

Dose-painting intensity-modulated proton therapy for intermediate- and high-risk meningioma.

BACKGROUND Newly diagnosed WHO grade II-III or any WHO grade recurrent meningioma exhibit an aggressive behavior and thus are considered as high- or intermediate risk tumors. Given the unsatisfactory rates of disease control and survival after primary or adjuvant radiation therapy, optimization of treatment strategies is needed. We investigated the potential of dose-painting intensity-modulated proton beam-therapy (IMPT) for intermediate- and high-risk meningioma. MATERIAL AND METHODS Imaging data from five patients undergoing proton beam-therapy were used. The dose-painting target was defined using [68]Ga-[1,4,7,10-tetraazacyclododecane tetraacetic acid]- d-Phe(1),Tyr(3)-octreotate ([68]Ga-DOTATATE)-positron emission tomography (PET) in target delineation. IMPT and photon intensity-modulated radiation therapy (IMRT) treatment plans were generated for each patient using an in-house developed treatment planning system (TPS) supporting spot-scanning technology and a commercial TPS, respectively. Doses of 66 Gy (2.2 Gy/fraction) and 54 Gy (1.8 Gy/fraction) were prescribed to the PET-based planning target volume (PTVPET) and the union of PET- and anatomical imaging-based PTV, respectively, in 30 fractions, using simultaneous integrated boost. RESULTS Dose coverage of the PTVsPET was equally good or slightly better in IMPT plans: dose inhomogeneity was 10 ± 3% in the IMPT plans vs. 13 ± 1% in the IMRT plans (p = 0.33). The brain Dmean and brainstem D50 were small in the IMPT plans: 26.5 ± 1.5 Gy(RBE) and 0.002 ± 0.0 Gy(RBE), respectively, vs. 29.5 ± 1.5 Gy (p = 0.001) and 7.5 ± 11.1 Gy (p = 0.02) for the IMRT plans, respectively. The doses delivered to the optic structures were also decreased with IMPT. CONCLUSIONS Dose-painting IMPT is technically feasible using currently available planning tools and resulted in dose conformity of the dose-painted target comparable to IMRT with a significant reduction of radiation dose delivered to the brain, brainstem and optic apparatus. Dose escalation with IMPT may improve tumor control and decrease radiation-induced toxicity.

Bases territoriales y metodológicas de la planificación para el desarrollo del turismo sustentable en la región de Coquimbo

El proceso de planificación de una u otra forma ha estado implicado en el desarrollo del turismo, aunque su aplicación no ha sido del todo exitosa. Asimismo la revalorización que está teniendo la planificación en distintos ámbitos, público y privado, tampoco es ajena en el turismo, pero, aún requiere modificaciones en los métodos y técnicas para ser aplicada a un turismo sustentable. Las modificaciones en los métodos para la planificación del turismo sustentable en la Región de Coquimbo, constituyen el objeto de esta investigación. La investigación establece como hipótesis: “La integración de las metodologías de planificación con los principios del turismo sustentable permitiría generar un modelo de planificación turística sustentable, que incorpora los valores del territorio, las necesidades de los visitantes, la participación de la comunidad receptora y es aplicable a la Región de Coquimbo a través de un marco territorial-metodológico”. A partir de esta hipótesis, se define el objetivo general: Elaborar una propuesta de un marco territorial-metodológico para la planificación turística sustentable en la Región de Coquimbo. De este objetivo general se deducen los objetivos específicos relacionados con el análisis de los conceptos y enfoques teóricos de la planificación aplicada al turismo; el estudio de los instrumentos de planificación del desarrollo turístico de la Región de Coquimbo; la determinación de categorías y elementos estructurantes y la elaboración de un marco territorial-metodológico de la planificación para el desarrollo del turismo sustentable en la Región de Coquimbo. La metodología de la investigación es de carácter cualitativo, está relacionada principalmente con la teoría fundamentada o grounded theory y con las teorías procedimentales de la planificación. Ambas metodologías fueron utilizadas en la construcción del modelo genérico y en la elaboración del marco procedimental-territorial. La construcción del modelo genérico se asimiló con la de la teoría en la grounded theory y de esta forma, se generaron conceptos a partir del marco conceptual teórico (conceptualización o abstracción); se construyeron categorías de análisis procedimental, territorial y de turismo sustentable (codificación abierta), se elaboraron categorías síntesis procedimental-territoriales y de turismo sustentable (codificación axial); se analizó la dinámica relacional de las categorías procedimental-territoriales (codificación selectiva) y se estableció el modelo genérico de planificación del turismo sustentable (teoría), que cuenta con dos submodelos: el submodelo de Condiciones Generales y el submodelo de Etapas de la planificación. A partir del modelo genérico se jerarquizaron las categorías definidas y relacionadas en forma dinámica, de acuerdo a las características de la Región de Coquimbo. Conjuntamente se incluyeron los requisitos del turismo sustentable recomendados por el Servicio Nacional de Turismo (SERNATUR) a nivel nacional, regional y comunal y se incorporaron las etapas ausentes en los planes de desarrollo turístico formulados en la Región, para dar origen al marco procedimental-territorial aplicado en la Región de Coquimbo. La investigación entrega como resultado una metodología de planificación para el turismo sustentable (modelo genérico), que al aplicarse a un sistema territorial particular, como es la Región de Coquimbo, genera una nueva metodología específica de planificación para el turismo sustentable de esta región (marco procedimental-territorial). El modelo genérico podrá ser aplicable a cualquier territorio dentro o fuera de la Región de Coquimbo, relevando sus propios valores, las necesidades de los visitantes y la participación de la comunidad y generando sus propios marcos procedimentales—territoriales (considerando los rasgos propios de los territorios, los requisitos del turismo sustentable y corrigiendo las falencias de las planificaciones previas existentes en ese territorio particular). ABSTRACT One way or another the process of planning has been implied in the development of tourism, although its application has not been absolutely successful. Also the revaluation that the planning is having in different scopes, public and private, and tourism is not free from it either, but still it requires modifications in the methods and techniques to be applied to a sustainable tourism. The modifications in the methods for the planning of the sustainable tourism in the Region of Coquimbo constitute the object of this investigation. The research establishes as hypothesis: “The integration of planning methodologies with the principles of the sustainable tourism would allow to generate a model of sustainable tourist planning, that incorporates the values of the territory, the needs of the visitors, the participation of the receiving community and is applicable to the Region of Coquimbo through a territorial-methodologic frame”. From this hypothesis, the general objective is defined: To make a proposal of a territorial-methodologic frame for the sustainable tourist planning in the Region of Coquimbo. From this general objective the specific objectives related to the analysis of the concepts and theoretical approaches of the planning applied to the tourism are deduced; the study of the planning tools of the tourist development of the Region of Coquimbo; the determination of categories and structural elements and the elaboration of a territorial-methodologic frame of the planning for the development of the sustainable tourism in the Region of Coquimbo. The methodology of the investigation is of qualitative character, is related mainly to the based theory or grounded theory and to the procedural theories of the planning. Both methodologies were used in the construction of the generic model and in the elaboration of the procedural-territorial frame. The construction of the generic model assimilated with the one of the theory in grounded theory and thus, concepts from the theoretical conceptual frame were generated (conceptualization or abstraction); categories of procedural, territorial analysis were constructed and of sustainable tourism (open codification), procedural-territorial syntheses categories were elaborated and of sustainable tourism (axial codification); the relational dynamics of the procedural-territorial categories was analyzed (selective codification) and the generic model of sustainable tourism planning was established (theory), that counts with two submodels: the General Conditions submodel and the Stages of planning submodel. From the generic model the categories defined and related in dynamic way were hierarchized, according to the characteristics of the Region of Coquimbo. Together with the recommended requirements of sustainable tourism done by The National Service of Tourism (SERNATUR) were included at national, regional level and communal and the absent stages in the formulated plans of tourist development in the Region were included, to give rise to the applied procedural-territorial frame in the Region of Coquimbo. The research gives as a result a planning methodology for sustainable tourism (generic model), that when being applied to a given territorial system, as it is the Region of Coquimbo, it generates a new specific planning methodology for the sustainable tourism of this region (procedural-territorial frame). The generic model could be applicable to any territory inside or outside the Region of Coquimbo, standing out its own values, the needs of the visitors and the participation of the community generating its own procedural-territorial frames (considering the own features of the territories, the requirements of the sustainable tourism and correcting the mistakes of the previous existing planning in that particular territory).

El territorio en el sistema agroalimentario: el tramo medio del valle del Duero 1900-2015

La lectura histórica del territorio en relación con el sistema agroalimentario aporta elementos claves para reconstruir el sistema territorial, aprovechando la oportunidad que ofrece un renovado interés por la alimentación local y sostenible. El análisis histórico transdisciplinar incorpora variables espaciales, económicas, energéticas, urbanísticas, agronómicas y nutricionales y se centra en el tramo medio del valle del Duero (Castilla y León, España). Se trata de un territorio tradicionalmente agrícola, donde un producto de la tierra -el vino- es motor de innovación y ha transformado paisajes y estructuras. Aún así, se enfrenta a un desarrollo desigual e ilustra las contradicciones del mundo rural en un contexto alimentario globalizado. El análisis de la región desde 1900 permite constatar la relación entre la organización del territorio, el sistema agroalimentario, y cada una de las etapas nutricionales: a) la superación de la desnutrición está asociada a una agricultura familiar y al territorio de proximidad, que persiste en la zona hasta 1950; b) el modelo de consumo de masas y sobrealimentación, se basa en una agricultura industrializada y un territorio polarizado ligado al desarrollismo, que se extiende hasta 1985; c) finalmente, el modelo de consumo segmentado se apoya en una agricultura terciarizada y un territorio de enclaves en un contexto de globalización, que dura hasta nuestros días. En la última fase aparecen nuevos modelos alternativos de reconstrucción territorial con sistemas emergentes que reconectan campo y ciudad, consumo y producción desde sistemas de alimentación sostenible. Conviven dos tendencias: una hacia la jerarquización y el productivismo tecnificado y otra hacia la multifuncionalidad y la recampesinización que se reapropia de las innovaciones técnicas. La adaptación a las condiciones locales y aprovechar los recursos endógenos son elementos clave de sostenibilidad ambiental y social. Incorporar la alimentación en la planificación urbana y territorial desde una perspectiva agroecológica reduciría la insostenibilidad del sistema alimentario. Las propuestas de ordenación han de tener en cuenta la tipología de municipios, sus interrelaciones, las características agrológicas y productivas, la relación del muncipcon los núcleos de referencia y con las poblaciones que concentran las necesidades de alimentación. Se debe considerar asimismo la disponiblidad de infraestructuras, de equipamientos y de capital humano y relacional para fijar cadena de valor local. La ordenación urbanística cuenta ya con mecanismos como la clasificación del suelo, la regulación de usos y el diseño de redes de equipamientos que inciden sobre la autonomía de los sistema de alimentación locales y permiten fomentar la biodiversidad y las variedades locales. Son mecanismos insuficientemente aprovechados. Una adecuada utilización de los instrumentos de ordenación existentes, junto con el desarrollo de otros nuevos mejorarían de forma significativa la resiliencia de los sistemas agroalimentarios locales. ABSTRACT The historical review of the relationship between territory and agrifood system provides key lessons to help rebuild the territorial fabric, seizing the opportunity offered by a renewed interest in local and sustainable food. The historical transdisciplinary analysis spans spatial, economic, energy, agronomic and nutritional variables, focuses on the middle reaches of the Douro valley (Castilla y Leon, Spain). This a traditionally agricultural region, which has managed to turn a land product – the wine– into an engine of innovation which has transformed landscapes and structures. Even so, it faces the challenges of uneven development and illustrates the contradictions of the rural world in a globalized context. After the analysis of the evolution of the region since 1900, it can be concluded that the territory has been organized over time according to three models of food system that are in turn linked to different nutritional stages: a) the nutritional stage of overcoming malnutrition is related to family agriculture and a territory of proximity, which persists in the studied area until 1950; b) the model of mass consumption and overeating, was built on an industrialized agriculture and a polarized territory with unhindered development, which runs until 1985; c) and, finally, the model of consumer segmentation associated with terciarized agriculture and enclave territories in the context of globalization, which lasts until present time. During this last stage new alternative models of small-scale territorial reconstruction appear, linked to emerging systems that, based on sustainable food systems, reconnect city and countryside, consumption and production. Actually two trends coexist: one towards hierarchisation and tech-based productivism, and another one towards multifunctionality and peasantization that reappropriates technical innovations. The adaptation to local conditions taking advantage of local resources is a key element of environmental and social sustainability. Integrating food into urban and regional planning from an agroecological perspective would help reduce the current unsustainability of the food system. Planning proposals for municipalities need to consider their typology, agrological characteristics, productive capacity, links to other municipalities, proximity to reference nodes and population concentrations with food demands that need to be met. Availability of infrastructure, facilities, as well as human and relational capital to establish and reinforce local value chains is another aspect to consider in planning proposals. Spatial and urban planning are already equipped with mechanisms, such as land classification and the design of facilities’ networks, that affect the autonomy and stability of local food systems and can support biodiversity and adoption of local varieties. We are, however, missing opportunities. An adequate use of existing planning tools and the development of new ones could significantly improve the resilience of local agrifood systems.

RADIANCE-A planning software for intra-operative radiation therapy

In the last decades accumulated clinical evidence has proven that intra-operative radiation therapy (IORT) is a very valuable technique. In spite of that, planning technology has not evolved since its conception, being outdated in comparison to current state of the art in other radiotherapy techniques and therefore slowing down the adoption of IORT. RADIANCE is an IORT planning system, CE and FDA certified, developed by a consortium of companies, hospitals and universities to overcome such technological backwardness. RADIANCE provides all basic radiotherapy planning tools which are specifically adapted to IORT. These include, but are not limited to image visualization, contouring, dose calculation algorithms-Pencil Beam (PB) and Monte Carlo (MC), DVH calculation and reporting. Other new tools, such as surgical simulation tools have been developed to deal with specific conditions of the technique. Planning with preoperative images (preplanning) has been evaluated and the validity of the system being proven in terms of documentation, treatment preparation, learning as well as improvement of surgeons/radiation oncologists (ROs) communication process. Preliminary studies on Navigation systems envisage benefits on how the specialist to accurately/safely apply the pre-plan into the treatment, updating the plan as needed. Improvements on the usability of this kind of systems and workflow are needed to make them more practical. Preliminary studies on Intraoperative imaging could provide an improved anatomy for the dose computation, comparing it with the previous pre-plan, although not all devices in the market provide good characteristics to do so. DICOM.RT standard, for radiotherapy information exchange, has been updated to cover IORT particularities and enabling the possibility of dose summation with external radiotherapy. The effect of this planning technology on the global risk of the IORT technique has been assessed and documented as part of a failure mode and effect analysis (FMEA). Having these technological innovations and their clinical evaluation (including risk analysis) we consider that RADIANCE is a very valuable tool to the specialist covering the demands from professional societies (AAPM, ICRU, EURATOM) for current radiotherapy procedures.

A comparison of landslide inventories along the shoreline of Steamboat Island Peninsula, Thurston County, WA: office based protocol vs. field based protocol

The mountain ranges and coastlines of Washington State have steep slopes, and they are susceptible to landslides triggered by intense rainstorms, rapid snow melts, earthquakes, and rivers and waves removing slope stability. Over a 30-year timespan (1984-2014 and includes State Route (SR) 530), a total of 28 deep-seated landslides caused 300 million dollars of damage and 45 deaths (DGER, 2015). During that same timeframe, ten storm events triggered shallow landslides and debris flows across the state, resulting in nine deaths (DGER, 2015). The loss of 43 people, due to the SR 530 complex reactivating and moving at a rate and distance unexpected to residents, highlighted the need for an inventory of the stateís landslides. With only 13% of the state mapped (Lombardo et al., 2015), the intention of this statewide inventory is to communicate hazards to citizens and decision makers. In order to compile an accurate and consistent landslide inventory, Washington needs to adopt a graphic information system (GIS) based mapping protocol. A mapping protocol provides consistency for measuring and recording information about landslides, including such information as the type of landslide, the material involved, and the size of the movement. The state of Oregon shares similar landslide problems as Washington, and it created a GIS-based mapping protocol designed to inform its residents, while also saving money and reducing costly hours in the field (Burns and Madin, 2009). In order to determine if the Oregon Department of Geology and Mineral Industries (DOGAMI) protocol, developed by Burns and Madin (2009), could serve as the basis for establishing Washingtonís protocol, I used the office-based DOGAMI protocol to map landslides along a 40-50 km (25-30 mile) shoreline in Thurston County, Washington. I then compared my results to the field-based landslide inventory created in 2009 by the Washington Division of Geology and Earth Resources (DGER) along this same shoreline. If the landslide area I mapped reasonably equaled the area of the DGER (2009) inventory, I would consider the DOGAMI protocol useful for Washington, too. Utilizing 1m resolution lidar flown for Thurston County in 2011 and a GIS platform, I mapped 36 landslide deposits and scarp flanks, covering a total area of 879,530 m2 (9,467,160 ft2). I also found 48 recent events within these deposits. With an exception of two slides, all of the movements occurred within the last fifty years. Along this same coastline, the DGER (2009) recorded 159 individual landslides and complexes, for a total area of 3,256,570 m2 (35,053,400 ft2). At a first glance it appears the DGER (2009) effort found a larger total number and total area of landslides. However, in addition to their field inventory, they digitized landslides previously mapped by other researchers, and they did not field confirm these landslides, which cover a total area of 2,093,860 m2 (22,538,150 ft2) (DGER, 2009). With this questionable landslide area removed and the toes and underwater landslides accounted for because I did not have a bathymetry dataset, my results are within 6,580 m2 (70,840 ft2) of the DGERís results. This similarity shows that the DOGAMI protocol provides a consistent and accurate approach to creating a landslide inventory. With a few additional modifications, I recommend that Washington State adopts the DOGAMI protocol. Acquiring additional 1m lidar and adopting a modified DOGAMI protocol poises the DGER to map the remaining 87% of the state, with an ultimate goal of informing citizens and decision makers of the locations and frequencies of landslide hazards on a user-friendly GIS platform.

Portland’s Urban Growth Boundary and Lessons for Shanghai and Suzhou-Wuxi-Changzhou Urban Agglomeration, China

Thesis (Master's)--University of Washington, 2016-06

Conservation planning with irreplaceability: does the method matter?

A number of systematic conservation planning tools are available to aid in making land use decisions. Given the increasing worldwide use and application of reserve design tools, including measures of site irreplaceability, it is essential that methodological differences and their potential effect on conservation planning outcomes are understood. We compared the irreplaceability of sites for protecting ecosystems within the Brigalow Belt Bioregion, Queensland, Australia, using two alternative reserve system design tools, Marxan and C-Plan. We set Marxan to generate multiple reserve systems that met targets with minimal area; the first scenario ignored spatial objectives, while the second selected compact groups of areas. Marxan calculates the irreplaceability of each site as the proportion of solutions in which it occurs for each of these set scenarios. In contrast, C-Plan uses a statistical estimate of irreplaceability as the likelihood that each site is needed in all combinations of sites that satisfy the targets. We found that sites containing rare ecosystems are almost always irreplaceable regardless of the method. Importantly, Marxan and C-Plan gave similar outcomes when spatial objectives were ignored. Marxan with a compactness objective defined twice as much area as irreplaceable, including many sites with relatively common ecosystems. However, targets for all ecosystems were met using a similar amount of area in C-Plan and Marxan, even with compactness. The importance of differences in the outcomes of using the two methods will depend on the question being addressed; in general, the use of two or more complementary tools is beneficial.

Impact of weather dependency on planning decisions in the australian national electricity market

A long-term planning method for the electricity market is to simulate market operation into the future. Outputs from market simulation include indicators for transmission augmentation and new generation investment. A key input to market simulations is demand forecasts. For market simulation purposes, regional demand forecasts for each half-hour interval of the forecasting horizon are required, and they must accurately represent realistic demand profiles and interregional demand relationships. In this paper, a demand model is developed to accurately model these relationships. The effects of uncertainty in weather patterns and inherent correlations between regional demands on market simulation results are presented. This work signifies the advantages of probabilistic modeling of demand levels when making market-based planning decisions.

The Application of Geographic Information Systems to climate change & land evaluation : a study of the effects of climate change upon crop productivity in a sub-tropical environment

This research investigates the contribution that Geographic Information Systems (GIS) can make to the land suitability process used to determine the effects of a climate change scenario. The research is intended to redress the severe under representation of Developing countries within the literature examining the impacts of climatic change upon crop productivity. The methodology adopts some of the Intergovernmental Panel on Climate Change (IPCC) estimates for regional climate variations, based upon General Circulation Model predictions (GCMs) and applies them to a baseline climate for Bangladesh. Utilising the United Nations Food & Agricultural Organisation's Agro-ecological Zones land suitability methodology and crop yield model, the effects of the scenario upon agricultural productivity on 14 crops are determined. A Geographic Information System (IDRISI) is adopted in order to facilitate the methodology, in conjunction with a specially designed spreadsheet, used to determine the yield and suitability rating for each crop. A simple optimisation routine using the GIS is incorporated to provide an indication of the 'maximum theoretical' yield available to the country, should the most calorifically significant crops be cultivated on each land unit both before and after the climate change scenario. This routine will provide an estimate of the theoretical population supporting capacity of the country, both now and in the future, to assist with planning strategies and research. The research evaluates the utility of this alternative GIS based methodology for the land evaluation process and determines the relative changes in crop yields that may result from changes in temperature, photosynthesis and flooding hazard frequency. In summary, the combination of a GIS and a spreadsheet was successful, the yield prediction model indicates that the application of the climate change scenario will have a deleterious effect upon the yields of the study crops. Any yield reductions will have severe implications for agricultural practices. The optimisation routine suggests that the 'theoretical maximum' population supporting capacity is well in excess of current and future population figures. If this agricultural potential could be realised however, it may provide some amelioration from the effects of climate change.

Development and evaluation of a geographic information system based method to estimate flooding susceptibility in an area of Broward County, Florida

The objective of this study was to develop a GIS-based multi-class index overlay model to determine areas susceptible to inland flooding during extreme precipitation events in Broward County, Florida. Data layers used in the method include Airborne Laser Terrain Mapper (ALTM) elevation data, excess precipitation depth determined through performing a Soil Conservation Service (SCS) Curve Number (CN) analysis, and the slope of the terrain. The method includes a calibration procedure that uses "weights and scores" criteria obtained from Hurricane Irene (1999) records, a reported 100-year precipitation event, Doppler radar data and documented flooding locations. Results are displayed in maps of Eastern Broward County depicting types of flooding scenarios for a 100-year, 24-hour storm based on the soil saturation conditions. As expected the results of the multi-class index overlay analysis showed that an increase for the potential of inland flooding could be expected when a higher antecedent moisture condition is experienced. The proposed method proves to have some potential as a predictive tool for flooding susceptibility based on a relatively simple approach.

UTILIZATION OF GIS AND SPATIAL ANALYSIS TECHNIQUES IN ARTISANAL AND SMALL SCALE MINING TO LOCATE A CENTRALIZED PROCESSING CENTRE

One of the global phenomena with threats to environmental health and safety is artisanal mining. There are ambiguities in the manner in which an ore-processing facility operates which hinders the mining capacity of these miners in Ghana. These problems are reviewed on the basis of current socio-economic, health and safety, environmental, and use of rudimentary technologies which limits fair-trade deals to miners. This research sought to use an established data-driven, geographic information (GIS)-based system employing the spatial analysis approach for locating a centralized processing facility within the Wassa Amenfi-Prestea Mining Area (WAPMA) in the Western region of Ghana. A spatial analysis technique that utilizes ModelBuilder within the ArcGIS geoprocessing environment through suitability modeling will systematically and simultaneously analyze a geographical dataset of selected criteria. The spatial overlay analysis methodology and the multi-criteria decision analysis approach were selected to identify the most preferred locations to site a processing facility. For an optimal site selection, seven major criteria including proximity to settlements, water resources, artisanal mining sites, roads, railways, tectonic zones, and slopes were considered to establish a suitable location for a processing facility. Site characterizations and environmental considerations, incorporating identified constraints such as proximity to large scale mines, forest reserves and state lands to site an appropriate position were selected. The analysis was limited to criteria that were selected and relevant to the area under investigation. Saaty’s analytical hierarchy process was utilized to derive relative importance weights of the criteria and then a weighted linear combination technique was applied to combine the factors for determination of the degree of potential site suitability. The final map output indicates estimated potential sites identified for the establishment of a facility centre. The results obtained provide intuitive areas suitable for consideration

Visibilidad y percepción en la construcción de un paisaje Prehistórico. El caso de Calviá (Mallorca, Islas Baleares)

El presente trabajo se centra en el estudio del papel que juega el control visual del espacio en las prácticas sociales de las comunidades prehistóricas. Este trabajo se articula a partir de un estudio de caso, el término municipal de Calviá, situado en el sureste de la isla de Mallorca, para analizar las diferentes formas de monumentalidad arquitectónica y cómo estas se constituyen cómo un punto de referencia social dentro del paisaje. Partiendo de una amplia horquilla temporal, que abarcaría el Bronce Naviforme (1550-850 AC), el período Talayótico (850-550 AC) y el Postalayótico (550-123 AC), se propone analizar los cambios y pervivencias en la construcción del paisaje, a través de estrategias de visibilidad, percepción y movimiento alrededor de los monumentos arquitectónicos. A través de la perspectiva de la Arqueología del Paisaje y mediante el uso de Sistemas de Información Geográfica (SIG) se propone un análisis de tendencias a largo plazo en la configuración social de un paisaje.

Public Risk Interpretation and Community Resilience Planning: A Case Study in Aberdeen, Washington

Thesis (Master's)--University of Washington, 2016-06