The Construction of ‘Disciplinary’ Violence Against Children — Social Workers’, Police Officers’ and Parents’ Rationales

This dissertation examines parental disciplinary violence against children in authority records and in the criminal procedure in Finland. The main aim is to analyze disciplinary violence, how it is defined, and how it is constructed as a crime by social workers, the police, and parents. This dissertation consists of four sub-studies and a summary article. In the first sub-study, I examine how disciplinary violence appears in child welfare documents and analyze the decision-making processes and measures taken by the child welfare workers. The second sub-study, utilizing police interview data, examines police officers’ perceptions of disciplinary violence, its criminalization, and its investigation. In addition to this analysis of police officers’ own perceptions, in the third sub-study, I use reports of crime and pre-trial investigation documents to look at what a typical suspicion of disciplinary violence coming to the attention of the police is and examine the decision-making processes of the police. Utilizing authority data, the fourth sub-study analyzes how parents rationalize the use of disciplinary violence to the authorities investigating these suspicions. The research provides findings that are unprecedented in Finland. Firstly, it was shown that social workers’ decision-making processes in suspicions of disciplinary violence follow three pathways of reasoning, with many factors taken into consideration; and in less than one-third of the cases, a request for criminal investigation has been made to the police. Secondly, it was verified that police officers hold different perceptions of disciplinary violence, and these perceptions have multiple effects on the investigation of these cases and the construction of disciplinary violence as a crime. Thirdly, the analysis of the reports of crime and pre-trial investigation documents showed that almost two-thirds of the cases of disciplinary violence had been sent to a prosecutor by the police and, thus, defined as a crime. However, in many cases, acts of disciplinary violence were often seen as ‘educational, petty one-off incidents’ and a possible trial and punishment for the perpetrator were seen as unreasonable. Fourthly, it was found that parents often try to neutralize and rationalize the violence they have used against their children, for example, either by denying the victim, the criminal intent, or the entire act, or relying on the necessity of the forbidden act. The dissertation concludes that disciplinary violence is defined and constructed in authority policies and practices, first and foremost, by the severity of the act, the nature of the act as continuous or singular, the perceived harm caused by the act to a child, and the perceptions of authorities regarding physical punishment of children. The asymmetrical power setting present in disciplinary violence and parents’ legitimized right to raise and discipline their children partly seem to explain why criminal-law processing of these suspicions of violence and understanding these as crimes is difficult. Finally, this research calls for more coherent and consistent authority practices and policies, achieved by educating authorities and increasing awareness on disciplinary violence, questions the need for a concept like ‘disciplinary’ violence, and suggests more emphasis on unambiguous perceptions of a child’s best interest.

Power and Performance Management Strategies on NoC-Based Multicore Platforms, Using DVFS, Adaptive Algorithm and Task Parallelism

This work presents synopsis of efficient strategies used in power managements for achieving the most economical power and energy consumption in multicore systems, FPGA and NoC Platforms. In this work, a practical approach was taken, in an effort to validate the significance of the proposed Adaptive Power Management Algorithm (APMA), proposed for system developed, for this thesis project. This system comprise arithmetic and logic unit, up and down counters, adder, state machine and multiplexer. The essence of carrying this project firstly, is to develop a system that will be used for this power management project. Secondly, to perform area and power synopsis of the system on these various scalable technology platforms, UMC 90nm nanotechnology 1.2v, UMC 90nm nanotechnology 1.32v and UMC 0.18 μmNanotechnology 1.80v, in order to examine the difference in area and power consumption of the system on the platforms. Thirdly, to explore various strategies that can be used to reducing system’s power consumption and to propose an adaptive power management algorithm that can be used to reduce the power consumption of the system. The strategies introduced in this work comprise Dynamic Voltage Frequency Scaling (DVFS) and task parallelism. After the system development, it was run on FPGA board, basically NoC Platforms and on these various technology platforms UMC 90nm nanotechnology1.2v, UMC 90nm nanotechnology 1.32v and UMC180 nm nanotechnology 1.80v, the system synthesis was successfully accomplished, the simulated result analysis shows that the system meets all functional requirements, the power consumption and the area utilization were recorded and analyzed in chapter 7 of this work. This work extensively reviewed various strategies for managing power consumption which were quantitative research works by many researchers and companies, it's a mixture of study analysis and experimented lab works, it condensed and presents the whole basic concepts of power management strategy from quality technical papers.

Développement logiciel par transformation de modèles

La recherche en génie logiciel a depuis longtemps tenté de mieux comprendre le processus de développement logiciel, minimalement, pour en reproduire les bonnes pratiques, et idéalement, pour pouvoir le mécaniser. On peut identifier deux approches majeures pour caractériser le processus. La première approche, dite transformationnelle, perçoit le processus comme une séquence de transformations préservant certaines propriétés des données à l’entrée. Cette idée a été récemment reprise par l’architecture dirigée par les modèles de l’OMG. La deuxième approche consiste à répertorier et à codifier des solutions éprouvées à des problèmes récurrents. Les recherches sur les styles architecturaux, les patrons de conception, ou les cadres d’applications s’inscrivent dans cette approche. Notre travail de recherche reconnaît la complémentarité des deux approches, notamment pour l’étape de conception: dans le cadre du développement dirigé par les modèles, nous percevons l’étape de conception comme l’application de patrons de solutions aux modèles reçus en entrée. Il est coutume de définir l’étape de conception en termes de conception architecturale, et conception détaillée. La conception architecturale se préoccupe d’organiser un logiciel en composants répondant à un ensemble d’exigences non-fonctionnelles, alors que la conception détaillée se préoccupe, en quelque sorte, du contenu de ces composants. La conception architecturale s’appuie sur des styles architecturaux qui sont des principes d’organisation permettant d’optimiser certaines qualités, alors que la conception détaillée s’appuie sur des patrons de conception pour attribuer les responsabilités aux classes. Les styles architecturaux et les patrons de conception sont des artefacts qui codifient des solutions éprouvées à des problèmes récurrents de conception. Alors que ces artefacts sont bien documentés, la décision de les appliquer reste essentiellement manuelle. De plus, les outils proposés n’offrent pas un support adéquat pour les appliquer à des modèles existants. Dans cette thèse, nous nous attaquons à la conception détaillée, et plus particulièrement, à la transformation de modèles par application de patrons de conception, en partie parce que les patrons de conception sont moins complexes, et en partie parce que l’implémentation des styles architecturaux passe souvent par les patrons de conception. Ainsi, nous proposons une approche pour représenter et appliquer les patrons de conception. Notre approche se base sur la représentation explicite des problèmes résolus par ces patrons. En effet, la représentation explicite du problème résolu par un patron permet : (1) de mieux comprendre le patron, (2) de reconnaître l’opportunité d’appliquer le patron en détectant une instance de la représentation du problème dans les modèles du système considéré, et (3) d’automatiser l’application du patron en la représentant, de façon déclarative, par une transformation d’une instance du problème en une instance de la solution. Pour vérifier et valider notre approche, nous l’avons utilisée pour représenter et appliquer différents patrons de conception et nous avons effectué des tests pratiques sur des modèles générés à partir de logiciels libres.

Identification et localisation des préoccupations fonctionnelles dans un code légataire Java

Traditionnellement, les applications orientées objets légataires intègrent différents aspects fonctionnels. Ces aspects peuvent être dispersés partout dans le code. Il existe différents types d’aspects : • des aspects qui représentent des fonctionnalités métiers ; • des aspects qui répondent à des exigences non fonctionnelles ou à d’autres considérations de conception comme la robustesse, la distribution, la sécurité, etc. Généralement, le code qui représente ces aspects chevauche plusieurs hiérarchies de classes. Plusieurs chercheurs se sont intéressés à la problématique de la modularisation de ces aspects dans le code : programmation orientée sujets, programmation orientée aspects et programmation orientée vues. Toutes ces méthodes proposent des techniques et des outils pour concevoir des applications orientées objets sous forme de composition de fragments de code qui répondent à différents aspects. La séparation des aspects dans le code a des avantages au niveau de la réutilisation et de la maintenance. Ainsi, il est important d’identifier et de localiser ces aspects dans du code légataire orienté objets. Nous nous intéressons particulièrement aux aspects fonctionnels. En supposant que le code qui répond à un aspect fonctionnel ou fonctionnalité exhibe une certaine cohésion fonctionnelle (dépendances entre les éléments), nous proposons d’identifier de telles fonctionnalités à partir du code. L’idée est d’identifier, en l’absence des paradigmes de la programmation par aspects, les techniques qui permettent l’implémentation des différents aspects fonctionnels dans un code objet. Notre approche consiste à : • identifier les techniques utilisées par les développeurs pour intégrer une fonctionnalité en l’absence des techniques orientées aspects • caractériser l’empreinte de ces techniques sur le code • et développer des outils pour identifier ces empreintes. Ainsi, nous présentons deux approches pour l’identification des fonctionnalités existantes dans du code orienté objets. La première identifie différents patrons de conception qui permettent l’intégration de ces fonctionnalités dans le code. La deuxième utilise l’analyse formelle de concepts pour identifier les fonctionnalités récurrentes dans le code. Nous expérimentons nos deux approches sur des systèmes libres orientés objets pour identifier les différentes fonctionnalités dans le code. Les résultats obtenus montrent l’efficacité de nos approches pour identifier les différentes fonctionnalités dans du code légataire orienté objets et permettent de suggérer des cas de refactorisation.

Development of a portable composite equipment for coastal fishery and hydrographic investigations

This thesis reports on the details of the works done to develop a complete system for acquisition of the important marine environmental parameters namely, current, current direction, salinity, temperature and depth. It encompaéps transducers,signalconditioners display arrangements and remote controlled multiplexer which constitue the system. The various associate instruentation and environmental requisites and problems have been discussed and solved to considerable extend. The design and development features of this composite system includes an integrated approach in order to make the final equipment to be simple, inexpensive and easy for operation from small and large boats. This could be achieved with the successful development of all required components with features matching between them, such as sensors, signals conditioners remote operated multiplexers, comon display methods, quick performance check and calibration methods. The major success rests on the development of sensors with excellent performance characteristics suitable for marine environment. out of the 5 sensors. that of current salinity and depth are quite noval types with specific advantages. The environmental effects have been eliminated to the required extend. The common signal conditioner for salinity, temperature and depth has noval design features for achieving simplicity, reliability and accomodating the three sensors of different functional requirements.

A Generic Software Architecture for a Domain Specific Distributed Embedded System

In this paper, we have evolved a generic software architecture for a domain specific distributed embedded system. The system under consideration belongs to the Command, Control and Communication systems domain. The systems in such domain have very long operational lifetime. The quality attributes of these systems are equally important as the functional requirements. The main guiding principle followed in this paper for evolving the software architecture has been functional independence of the modules. The quality attributes considered most important for the system are maintainability and modifiability. Architectural styles best suited for the functionally independent modules are proposed with focus on these quality attributes. The software architecture for the system is envisioned as a collection of architecture styles of the functionally independent modules identified

Reducció de vibracions residuals en moviments transitoris. Definició de lleis de moviment per mitjà de corbes B-spline

Molts sistemes mecànics existents tenen un comportament vibratori funcionalment perceptible, que es posa de manifest enfront d'excitacions transitòries. Normalment, les vibracions generades segueixen presents després del transitori (vibracions residuals), i poden provocar efectes negatius en la funció de disseny del mecanisme. El mètode que es proposa en aquesta tesi té com a objectiu principal la síntesi de lleis de moviment per reduir les vibracions residuals. Addicionalment, els senyals generats permeten complir dues condicions definides per l'usuari (anomenats requeriments funcionals). El mètode es fonamenta en la relació existent entre el contingut freqüencial d'un senyal transitori, i la vibració residual generada, segons sigui l'esmorteïment del sistema. Basat en aquesta relació, i aprofitant les propietats de la transformada de Fourier, es proposa la generació de lleis de moviment per convolució temporal de polsos. Aquestes resulten formades per trams concatenats de polinomis algebraics, cosa que facilita la seva implementació en entorns numèrics per mitjà de corbes B-spline.

Impulsiveness as a timing disturbance: neurocognitive abnormalities in attention-deficit hyperactivity disorder during temporal processes and normalization with methylphenidate.

We argue that impulsiveness is characterized by compromised timing functions such as premature motor timing, decreased tolerance to delays, poor temporal foresight and steeper temporal discounting. A model illustration for the association between impulsiveness and timing deficits is the impulsiveness disorder of attention-deficit hyperactivity disorder (ADHD). Children with ADHD have deficits in timing processes of several temporal domains and the neural substrates of these compromised timing functions are strikingly similar to the neuropathology of ADHD. We review our published and present novel functional magnetic resonance imaging data to demonstrate that ADHD children show dysfunctions in key timing regions of prefrontal, cingulate, striatal and cerebellar location during temporal processes of several time domains including time discrimination of milliseconds, motor timing to seconds and temporal discounting of longer time intervals. Given that impulsiveness, timing abnormalities and more specifically ADHD have been related to dopamine dysregulation, we tested for and demonstrated a normalization effect of all brain dysfunctions in ADHD children during time discrimination with the dopamine agonist and treatment of choice, methylphenidate. This review together with the new empirical findings demonstrates that neurocognitive dysfunctions in temporal processes are crucial to the impulsiveness disorder of ADHD and provides first evidence for normalization with a dopamine reuptake inhibitor.

UK commercial property lease structures: Landlord and tenant mismatch

UK commercial property lease structures have come under considerable scrutiny during the past decade since the property crash of the early 1990s. In particular, tenants complained that the system was unfair and that it has blocked business change. Government is committed, through its 2001 election manifesto, to promote flexibility and choice in the commercial property lettings market and a new voluntary Commercial Leases Code of Practice was launched in April 2002. This paper investigates whether occupiers are being offered the leases they require or whether there is a mismatch between occupier requirements and actual leases in the market. It draws together the substantial data now available on the actual terms of leases in the UK and surveys of corporate occupiers' attitude to their occupation requirements. Although the data indicated that UK leases have become shorter and more diverse since 1990, this is still not sufficient to meet the current requirements of many corporate occupiers. It is clear that the inability to manage entry and exit strategies is a major concern to occupiers. Lease length is the primary concern of tenants and a number of respondents comment on the mismatch between lease length in the UK and business planning horizons. The right to break and other problems with alienation clauses also pose serious difficulties for occupiers, thus reinforcing the mismatch. Other issues include repairing and insuring clauses and the type of review clause. There are differences in opinion between types of occupier. In particular, international corporate occupiers are significantly more concerned about the length of lease and the incidence of break clauses than national occupiers and private-sector tenants are significantly more concerned about leasing in general than public-sector occupiers. Proposed solutions by tenants are predictable and include shorter leases, more frequent breaks and relaxation of restrictions concerning alienation and other clauses. A significant number specify that they would pay more for shorter leases and other improved terms. Short leases would make many of the other terms more acceptable and this is why they are the main concern of corporate occupiers. Overall, the evidence suggests that there continues to be a gap between occupiers' lease requirements and those currently offered by the market. There are underlying structural factors that act as an inertial force on landlords and inhibit the changes which occupiers appear to want. Nevertheless, the findings raise future research questions concerning whether UK lease structures are a constraining factor on UK competitiveness.

How does the brain mediate interpretation of incongruent auditory emotions? The neural response to prosody in the presence of conflicting lexico-semantic cues

We frequently encounter conflicting emotion cues. This study examined how the neural response to emotional prosody differed in the presence of congruent and incongruent lexico-semantic cues. Two hypotheses were assessed: (i) decoding emotional prosody with conflicting lexico-semantic cues would activate brain regions associated with cognitive conflict (anterior cingulate and dorsolateral prefrontal cortex) or (ii) the increased attentional load of incongruent cues would modulate the activity of regions that decode emotional prosody (right lateral temporal cortex). While the participants indicated the emotion conveyed by prosody, functional magnetic resonance imaging data were acquired on a 3T scanner using blood oxygenation level-dependent contrast. Using SPM5, the response to congruent cues was contrasted with that to emotional prosody alone, as was the response to incongruent lexico-semantic cues (for the 'cognitive conflict' hypothesis). The right lateral temporal lobe region of interest analyses examined modulation of activity in this brain region between these two contrasts (for the 'prosody cortex' hypothesis). Dorsolateral prefrontal and anterior cingulate cortex activity was not observed, and neither was attentional modulation of activity in right lateral temporal cortex activity. However, decoding emotional prosody with incongruent lexico-semantic cues was strongly associated with left inferior frontal gyrus activity. This specialist form of conflict is therefore not processed by the brain using the same neural resources as non-affective cognitive conflict and neither can it be handled by associated sensory cortex alone. The recruitment of inferior frontal cortex may indicate increased semantic processing demands but other contributory functions of this region should be explored.

Semiotic modelling for complex enterprise systems

An enterprise is viewed as a complex system which can be engineered to accomplish organisational objectives. Systems analysis and modelling will enable to the planning and development of the enterprise and IT systems. Many IT systems design methods focus on functional and non-functional requirements of the IT systems. Most methods are normally capable of one but leave out other aspects. Analysing and modelling of both business and IT systems may often have to call on techniques from various suites of methods which may be placed on different philosophic and methodological underpinnings. Coherence and consistency between the analyses are hard to ensure. This paper introduces the Problem Articulation Method (PAM) which facilitates the design of an enterprise system infrastructure on which an IT system is built. Outcomes of this analysis represent requirements which can be further used for planning and designing a technical system. As a case study, a finance system, Agresso, for e-procurement has been used in this paper to illustrate the applicability of PAM in modelling complex systems.

Visualização em multirresolução do fluxo de tópicos em coleções de texto

O uso combinado de algoritmos para a descoberta de tópicos em coleções de documentos com técnicas orientadas à visualização da evolução daqueles tópicos no tempo permite a exploração de padrões temáticos em corpora extensos a partir de representações visuais compactas. A pesquisa em apresentação investigou os requisitos de visualização do dado sobre composição temática de documentos obtido através da modelagem de tópicos – o qual é esparso e possui multiatributos – em diferentes níveis de detalhe, através do desenvolvimento de uma técnica de visualização própria e pelo uso de uma biblioteca de código aberto para visualização de dados, de forma comparativa. Sobre o problema estudado de visualização do fluxo de tópicos, observou-se a presença de requisitos de visualização conflitantes para diferentes resoluções dos dados, o que levou à investigação detalhada das formas de manipulação e exibição daqueles. Dessa investigação, a hipótese defendida foi a de que o uso integrado de mais de uma técnica de visualização de acordo com a resolução do dado amplia as possibilidades de exploração do objeto em estudo em relação ao que seria obtido através de apenas uma técnica. A exibição dos limites no uso dessas técnicas de acordo com a resolução de exploração do dado é a principal contribuição desse trabalho, no intuito de dar subsídios ao desenvolvimento de novas aplicações.

Goals Software Construction Process

Generalized hyper competitiveness in the world markets has determined the need to offer better products to potential and actual clients in order to mark an advantagefrom other competitors. To ensure the production of an adequate product, enterprises need to work on the efficiency and efficacy of their business processes (BPs) by means of the construction of Interactive Information Systems (IISs, including Interactive Multimedia Documents) so that they are processed more fluidly and correctly.The construction of the correct IIS is a major task that can only be successful if the needs from every intervenient are taken into account. Their requirements must bedefined with precision, extensively analyzed and consequently the system must be accurately designed in order to minimize implementation problems so that the IIS isproduced on schedule and with the fewer mistakes as possible. The main contribution of this thesis is the proposal of Goals, a software (engineering) construction process which aims at defining the tasks to be carried out in order to develop software. This process defines the stakeholders, the artifacts, and the techniques that should be applied to achieve correctness of the IIS. Complementarily, this process suggests two methodologies to be applied in the initial phases of the lifecycle of the Software Engineering process: Process Use Cases for the phase of requirements, and; MultiGoals for the phases of analysis and design. Process Use Cases is a UML-based (Unified Modeling Language), goal-driven and use case oriented methodology for the definition of functional requirements. It uses an information oriented strategy in order to identify BPs while constructing the enterprise’s information structure, and finalizes with the identification of use cases within the design of these BPs. This approach provides a useful tool for both activities of Business Process Management and Software Engineering. MultiGoals is a UML-based, use case-driven and architectural centric methodology for the analysis and design of IISs with support for Multimedia. It proposes the analysis of user tasks as the basis of the design of the: (i) user interface; (ii) the system behaviour that is modeled by means of patterns which can combine Multimedia and standard information, and; (iii) the database and media contents. This thesis makes the theoretic presentation of these approaches accompanied with examples from a real project which provide the necessary support for the understanding of the used techniques.

A JML-Based strategy for incorporating formal specifications into the software development process

This thesis presents a JML-based strategy that incorporates formal specifications into the software development process of object-oriented programs. The strategy evolves functional requirements into a “semi-formal” requirements form, and then expressing them as JML formal specifications. The strategy is implemented as a formal-specification pseudo-phase that runs in parallel with the other phase of software development. What makes our strategy different from other software development strategies used in literature is the particular use of JML specifications we make all along the way from requirements to validation-and-verification.

Análise de desempenho de sistemas distribuídos de grande porte na plataforma Java

The lava Platform is increasing1y being adopted in the development of distributed sys¬tems with higb user demando This kind of application is more complex because it needs beyond attending the functional requirements, to fulfil1 the pre-established performance parameters. This work makes a study on the Java Vutual Machine (JVM), approaching its intemal aspects and exploring the garbage collection strategies existing in the literature and used by the NM. It also presents a set of tools that helps in the job of optimizing applications and others that help in the monitoring of applications in the production envi¬ronment. Doe to the great amount of technologies that aim to solve problems which are common to the application layer, it becomes difficult to choose the one with best time response and less memory usage. This work presents a brief introduction to each one of tbe possible technologies and realize comparative tests through a statistical analysis of the response time and garbage collection activity random variables. The obtained results supply engineers and managers with a subside to decide which technologies to use in large applications through the knowledge of how they behave in their environments and the amount of resources that they consume. The relation between the productivity of the technology and its performance is also considered ao important factor in this choice