Focusing of light by a nanohole array

The authors demonstrate a mechanism for focusing at optical frequencies based on the use of nanohole quasiperiodic arrays in metal screens. Using coherent illumination at 660 nm and scanning aperture optical microscopy, similar to 290 nm "hot spots" were observed at a distance of similar to 12.5 mu m from the array. Even smaller hot spots of about similar to 200 nm in waist were observed closer to the plane of the array.(c) 2007 American Institute of Physics.

Partial purification of lymphokine activities by iso-electric focusing

A continuous cell-line has been shown to be adaptable to preparation of supernatants containing lymphokine activities. Separation and partial purification of migration inhibiting, colony stimulating and interferon activities from such preparations has been achieved by the use of density gradient iso-electric focusing.

Electromagnetic Focusing and Imaging in Stratified Media Using Gradient Phase Profiled Conjugating Lens

High-resolution imaging of a dipole source in stratified medium based on negative refraction is presented in this paper. Compensation of the material parameter contrast at the stratified media interface is achieved using a gradient phase profiled conjugating lens (GPCL). It is shown both analytically and numerically that the phase gradient applied across the GPCL positioned at the interface of vertically stratified media enables a high-quality image of a dipole source in a mirror symmetric position with respect to the lens plane. The analytical closed form expression of the phase gradient function is derived using Huygens-Kirchhoff principle. The result is applicable to media with arbitrary stratification and material parameters, including lossy materials. The mechanism for formation of the dipole image in the stratified medium and aberration due to the dielectric contrast at the interface, particularly electromagnetic loss, is discussed in detail. The efficacy of gradient phase and amplitude aberration compensations mechanisms available through the GPCL is articulated. The results of the study are of importance in a wide range of imaging problems in stratified media for medical, civil, and military applications.

Reporting the preliminary findings of an RCT focusing on the educational outcomes of children in care

This paper focuses on the development of an RCT to evaluate the effectiveness of a book gifting scheme designed to improve the educational outcomes of children in care

A compact broadband ion beam focusing device based on laser-driven megagauss thermoelectric magnetic fields

Ultra-intense lasers can nowadays routinely accelerate kiloampere ion beams. These unique sources of particle beams could impact many societal (e.g., proton-therapy or fuel recycling) and fundamental (e.g., neutron probing) domains. However, this requires overcoming the beam angular divergence at the source. This has been attempted, either with large-scale conventional setups or with compact plasma techniques that however have the restriction of short (<1 mm) focusing distances or a chromatic behavior. Here, we show that exploiting laser-triggered, long-lasting (>50 ps), thermoelectric multi-megagauss surface magnetic (B)-fields, compact capturing, and focusing of a diverging laser-driven multi-MeV ion beam can be achieved over a wide range of ion energies in the limit of a 5° acceptance angle.

Examining the inclusion experiences of students with intellectual disabilities : a study focusing on the transition from elementary to secondary school

Transitioning from elementary to secondary school is a major event in adolescents' lives and can be associated with academic, social, and emotional challenges (Shaffer, 2005; Sirsch, 2003). Considerably less research has focused on the transitional experiences of students with intellectual disabilities (lD) as they enter secondary school and the role of educational inclusion in this process (Noland, Cason, & Lincoln, 2007). Conceivably, students with ID who leave inclusive elementary schools, where they have been educated alongside their peers without ID, and who enter segregated secondary educational placements may experience unique social and emotional challenges (Farmer, Pearl, & Van Acker, 1996; Fryxell & Kennedy, 1995; Shaffer, 2005). This study examined the transitional experiences of 6 students with ID and the role of educational inclusion, with a focus on elementary to secondary school transitions from inclusive to segregated settings and vice versa. This study included the collection of multiple sources of data. Semi-structured interviews with 6 caregivers and students with ID were conducted. Students' Individual Education Transitional Plans were discussed in caregivers' interviews to determine how they shaped students' educational inclusion experiences (Ontario Ministry of Education & Training, 1999/2000/2004). Parts ofthe following questionnaires were "qualitized" (Tashakkori & Teddlie, 1998) and administered orally: "Youth Self-Report" (YSR; Achenbach, 2001 c) and "Child Behaviour Checklist Caregivers Form" (CBLC/6-18; Achenbach, 200la). The findings of this study contribute to the literature on educational inclusion by highlighting the positive/negative social and emotional impact of congruent and incongruent transitional experiences of students with ID and the role of educational inclusion.

Focusing the kaleidoscope: investigating the newly formed role of 'Academic Lead’ at a research-led University

Now, more than ever, higher education institutions are reflecting on the need for flexible leadership models to help adapt to the fast changing academic environment. Rapid shifts in the sector are contributing to a kaleidoscopic ‘supercomplexity’ of challenges, structures, processes and value frameworks for academics who lead and for those who are led. How are institutions’ leadership structures and roles developing in response to these changes? And how do these responses affect academic staff in relation to their identity, status and career trajectory? This paper reports on a Leadership Foundation funded research project exploring the ways in which one UK institution has implemented a new ‘distributed’ leadership model. Crucially, the project examines the impact of the model on both those who are leaders and those being led.

Study of the relationship between roads, relief, land use, and natural vegetation in the Ibiuna Plateau - SP, focusing on landscape ecology

Roads facilitate access by deforestation agents, being relevant in studies approaching conservationist matters in rainforests. It is important to understand the relationship between road distribution, relief, land use, and forest coverage in order to evaluate where forests are more vulnerable. This study aimed at: 1) understanding the relationship between relief and density and road connectivity in three moments in time; and 2) evaluating the relationship between distance from roads and forest coverage, farmlands and rural and urban facilities in a fragmented Atlantic Forest landscape in three moments in time. Maps of roads, altitude, and land use and coverage were used. Chi-square tests showed that: 1) density and road connectivity did not present significant relationship with the relief; and 2) forest areas occupy areas distant from the roads, while farmlands and rural and urban facilities occupy areas nearer the roads. Roads and land use, regardless of relief, influence forest coverage distribution. Thus, we suggest that roads are taken into account in conservationist strategies and environmental planning.

Phenotypic modulation of cultured vascular smooth muscle cells: a functional analysis focusing on MLC and ERK1/2 phosphorylation

Primary cultures of vascular smooth muscle cells (VSMCs) from rats offer a good model system to examine the molecular basis of mechanism of vascular contraction-relaxation. However, during pathological conditions such as atherosclerosis and hypertension, VSMCs characteristically exhibit phenotypic modulation, change from a quiescent contractile to a proliferative synthetic phenotype, which impairs this mechanism of vascular contraction-relaxation. Taking in account that Myosin light chain (MLC) and ERK1/2 directly participate in the process of vascular contraction, the aim of the current study was to analyze the involvement of MLC and ERK1/2 signaling during the process of VSMCs phenotypic modulation. Primary cultures of VSMCs from rat thoracic aortas were isolated and submitted to different number of passages or to freezing condition. Semi-quantitative RT-PCR was used to evaluate the mRNA levels of VSMCs differentiation markers, and western blot assays were used to determine the MLC and ERK1/2 phosphorylation levels during VSMCs phenotypic modulation. Also, immunocytochemical experiments were performed to evaluate morphological alterations occurred during the phenotypic modulation. Elevated number of passages (up to 4) as well as the freezing/thawing process induced a significant phenotypic modulation in VSMCs, which was accompanied by diminished MLC and ERK1/2 phosphorylation levels. Phosphorylation of MLC was suppressed completely by the treatment with a synthetic inhibitor of MEK-1, a direct upstream of ERK1/2, PD98059. These findings provide that ERK1/2-promoted MLC phosphorylation is impaired during VSMCs phenotypic modulation, suggesting that ERK1/2 signaling pathway may represent a potential target for understanding the pathogenesis of several vascular disease processes frequently associated to this condition.

Development of on-line courses focusing on quality

The purpose of this paper is to show by which means quality in on-line education is achieved at Dalarna University. As a leading provider of online university courses in northern Europe, both in terms of number of students conducting their studies entirely on-line compared to the whole student body, (approximately 70% on-line students all subjects included), Dalarna University has acquired de facto extensive practical experience in the field of information technologies related to distance education. It has been deemed essential, to ensure that the quality of teaching reflects the principles governing the assessment of learning so that on-line education is deemed as comparative to campus education, both from a legal and cognitive point-of-view. Dalarna University began on-line courses in 2002 and it soon became clear that the interaction between the teacher and the student should make its mark in all stages of the learning process in order to both maintain the learners' motivation and ensure the assimilation of knowledge. We will illustrate these aspects by giving examples of what has been done in the recent years in on-line teaching of languages. As this method of teaching is not limited to learning basic language skills, but also to the study of literature, social issues and the language system of the various cultures, our presentation will offer a broad range of areas where the principles of quality in education are provided on a daily basis.

An Experimental Study of Submerged Entry Nozzles (SEN) Focusing on Decarburization and Clogging

The submerged entry nozzle (SEN) is used to transport the molten steel from a tundish to a mould. The main purpose of its usage is to prevent oxygen and nitrogen pick-up by molten steel from the gas. Furthermore, to achieve the desired flow conditions in the mould. Therefore, the SEN can be considered as a vital factor for a stable casting process and the steel quality. In addition, the steelmaking processes occur at high temperatures around 1873 K, so the interaction between the refractory materials of the SEN and molten steel is unavoidable. Therefore, the knowledge of the SEN behaviors during preheating and casting processes is necessary for the design of the steelmaking processes  The internal surfaces of modern SENs are coated with a glass/silicon powder layer to prevent the SEN graphite oxidation during preheating. The effects of the interaction between the coating layer and the SEN base refractory materials on clogging were studied. A large number of accretion samples formed inside alumina-graphite clogged SENs were examined using FEG-SEM-EDS and Feature analysis. The internal coated SENs were used for continuous casting of stainless steel grades alloyed with Rare Earth Metals (REM). The post-mortem study results clearly revealed the formation of a multi-layer accretion. A harmful effect of the SENs decarburization on the accretion thickness was also indicated. In addition, the results indicated a penetration of the formed alkaline-rich glaze into the alumina-graphite base refractory. More specifically, the alkaline-rich glaze reacts with graphite to form a carbon monoxide gas. Thereafter, dissociation of CO at the interface between SEN and molten metal takes place. This leads to reoxidation of dissolved alloying elements such as REM (Rare Earth Metal). This reoxidation forms the “In Situ” REM oxides at the interface between the SEN and the REM alloyed molten steel. Also, the interaction of the penetrated glaze with alumina in the SEN base refractory materials leads to the formation of a high-viscous alumina-rich glaze during the SEN preheating process. This, in turn, creates a very uneven surface at the SEN internal surface. Furthermore, these uneven areas react with dissolved REM in molten steel to form REM aluminates, REM silicates and REM alumina-silicates. The formation of the large “in-situ” REM oxides and the reaction of the REM alloying elements with the previously mentioned SEN´s uneven areas may provide a large REM-rich surface in contact with the primary inclusions in molten steel. This may facilitate the attraction and agglomeration of the primary REM oxide inclusions on the SEN internal surface and thereafter the clogging. The study revealed the disadvantages of the glass/silicon powder coating applications and the SEN decarburization. The decarburization behaviors of Al2O3-C, ZrO2-C and MgO-C refractory materials from a commercial Submerged Entry Nozzle (SEN), were also investigated for different gas atmospheres consisting of CO2, O2 and Ar. The gas ratio values were kept the same as it is in a propane combustion flue gas at different Air-Fuel-Ratio (AFR) values for both Air-Fuel and Oxygen-Fuel combustion systems. Laboratory experiments were carried out under nonisothermal conditions followed by isothermal heating. The decarburization ratio (α) values of all three refractory types were determined by measuring the real time weight losses of the samples. The results showed the higher decarburization ratio (α) values increasing for MgO-C refractory when changing the Air-Fuel combustion to Oxygen-Fuel combustion at the same AFR value. It substantiates the SEN preheating advantage at higher temperatures for shorter holding times compared to heating at lower temperatures during longer holding times for Al2O3-C samples. Diffusion models were proposed for estimation of the decarburization rate of an Al2O3-C refractory in the SEN. Two different methods were studied to prevent the SEN decarburization during preheating: The effect of an ZrSi2 antioxidant and the coexistence of an antioxidant additive and a (4B2O3 ·BaO) glass powder on carbon oxidation for non-isothermal and isothermal heating conditions in a controlled atmosphere. The coexistence of 8 wt% ZrSi2 and 15 wt% (4B2O3 ·BaO) glass powder of the total alumina-graphite refractory base materials, presented the most effective resistance to carbon oxidation. The 121% volume expansion due to the Zircon formation during heating and filling up the open pores by a (4B2O3 ·BaO) glaze during the green body sintering led to an excellent carbon oxidation resistance. The effects of the plasma spray-PVD coating of the Yttria Stabilized Zirconia (YSZ) powder on the carbon oxidation of the Al2O3-C coated samples were investigated. Trials were performed at non-isothermal heating conditions in a controlled atmosphere. Also, the applied temperature profile for the laboratory trials were defined based on the industrial preheating trials. The controlled atmospheres consisted of CO2, O2 and Ar. The thicknesses of the decarburized layers were measured and examined using light optic microscopy, FEG-SEM and EDS. A 250-290 μm YSZ coating is suggested to be an appropriate coating, as it provides both an even surface as well as prevention of the decarburization even during heating in air. In addition, the interactions between the YSZ coated alumina-graphite refractory base materials in contact with a cerium alloyed molten stainless steel were surveyed. The YSZ coating provided a total prevention of the alumina reduction by cerium. Therefore, the prevention of the first clogging product formed on the surface of the SEN refractory base materials. Therefore, the YSZ plasma-PVD coating can be recommended for coating of the hot surface of the commercial SENs.

Barriers and facilitators in the provision of post-abortion care at district level in central Uganda : a qualitative study focusing on task sharing between physicians and midwives

Background: Abortion is restricted in Uganda, and poor access to contraceptive methods result in unwanted pregnancies. This leaves women no other choice than unsafe abortion, thus placing a great burden on the Ugandan health system and making unsafe abortion one of the major contributors to maternal mortality and morbidity in Uganda. The existing sexual and reproductive health policy in Uganda supports the sharing of tasks in post-abortion care. This task sharing is taking place as a pragmatic response to the increased workload. This study aims to explore physicians' and midwives' perception of post-abortion care with regard to professional competences, methods, contraceptive counselling and task shifting/sharing in post-abortion care. Methods: In-depth interviews (n = 27) with health care providers of post-abortion care were conducted in seven health facilities in the Central Region of Uganda. The data were organized using thematic analysis with an inductive approach. Results: Post-abortion care was perceived as necessary, albeit controversial and sometimes difficult to provide. Together with poor conditions post-abortion care provoked frustration especially among midwives. Task sharing was generally taking place and midwives were identified as the main providers, although they would rarely have the proper training in post-abortion care. Additionally, midwives were sometimes forced to provide services outside their defined task area, due to the absence of doctors. Different uterine evacuation skills were recognized although few providers knew of misoprostol as a method for post-abortion care. An overall need for further training in post-abortion care was identified. Conclusions: Task sharing is taking place, but providers lack the relevant skills for the provision of quality care. For post-abortion care to improve, task sharing needs to be scaled up and in-service training for both doctors and midwives needs to be provided. Post-abortion care should further be included in the educational curricula of nurses and midwives. Scaled-up task sharing in post-abortion care, along with misoprostol use for uterine evacuation would provide a systematic approach to improving the quality of care and accessibility of services, with the aim of reducing abortion-related mortality and morbidity in Uganda.

Exploring the influence of context in a community-based facilitation intervention focusing on neonatal health and survival in Vietnam : a qualitative study

Background In the Neonatal health – Knowledge into Practice (NeoKIP) trial in Vietnam, local stakeholder groups, supported by trained laywomen acting as facilitators, promoted knowledge translation (KT) resulting in decreased neonatal mortality. In general, as well as in the community-based NeoKIP trial, there is a need to further understand how context influences KT interventions in low- and middle-income countries (LMICs). Thus, the objective of this study was to explore the influence of context on the facilitation process in the NeoKIP intervention. Methods A secondary content analysis was performed on 16 Focus Group Discussions with facilitators and participants of the stakeholder groups, applying an inductive approach to the content on context through naïve understanding and structured analysis. Results The three main-categories of context found to influence the facilitation process in the NeoKIP intervention were: (1) Support and collaboration of local authorities and other communal stakeholders; (2) Incentives to, and motivation of, participants; and (3) Low health care coverage and utilization. In particular, the role of local authorities in a KT intervention was recognized as important. Also, while project participants expected financial incentives, non-financial benefits such as individual learning were considered to balance the lack of reimbursement in the NeoKIP intervention. Further, project participants recognized the need to acknowledge the needs of disadvantaged groups. Conclusions This study provides insight for further understanding of the influence of contextual aspects to improve effects of a KT intervention in Vietnam. We suggest that future KT interventions should apply strategies to improve local authorities’ engagement, to identify and communicate non-financial incentives, and to make disadvantaged groups a priority. Further studies to evaluate the contextual aspects in KT interventions in LMICs are also needed.

School innovation in science (SIS): focusing on teaching

Focuses on the framework of School Innovation in Sciences (SIS) in Australia. Aim of SIS; Concept of school; Components of SIS for effective learning and teaching. INSET: School Innovation in Science Strategy.