Censo comprova que diminuiu o fluxo de nordestinos em busca de uma vida melhor no Sudeste

Reportagem do Jornal da Globo

Otimização de vazão de poços injetores em projeto de injeção de água utilizando simulação por linhas de fluxo

Until the early 90s, the simulation of fluid flow in oil reservoir basically used the numerical technique of finite differences. Since then, there was a big development in simulation technology based on streamlines, so that nowadays it is being used in several cases and it can represent the physical mechanisms that influence the fluid flow, such as compressibility, capillarity and gravitational segregation. Streamline-based flow simulation is a tool that can help enough in waterflood project management, because it provides important information not available through traditional simulation of finite differences and shows, in a direct way, the influence between injector well and producer well. This work presents the application of a methodology published in literature for optimizing water injection projects in modeling of a Brazilian Potiguar Basin reservoir that has a large number of wells. This methodology considers changes of injection well rates over time, based on information available through streamline simulation. This methodology reduces injection rates in wells of lower efficiency and increases injection rates in more efficient wells. In the proposed model, the methodology was effective. The optimized alternatives presented higher oil recovery associated with a lower water injection volume. This shows better efficiency and, consequently, reduction in costs. Considering the wide use of the water injection in oil fields, the positive outcome of the modeling is important, because it shows a case study of increasing of oil recovery achieved simply through better distribution of water injection rates

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.

Simulação de fluxo de fluidos em meios porosos desordenados uma análise de efeito de escala na estimativa da permeabilidade e do coeficiente de arrasto

The present study provides a methodology that gives a predictive character the computer simulations based on detailed models of the geometry of a porous medium. We using the software FLUENT to investigate the flow of a viscous Newtonian fluid through a random fractal medium which simplifies a two-dimensional disordered porous medium representing a petroleum reservoir. This fractal model is formed by obstacles of various sizes, whose size distribution function follows a power law where exponent is defined as the fractal dimension of fractionation Dff of the model characterizing the process of fragmentation these obstacles. They are randomly disposed in a rectangular channel. The modeling process incorporates modern concepts, scaling laws, to analyze the influence of heterogeneity found in the fields of the porosity and of the permeability in such a way as to characterize the medium in terms of their fractal properties. This procedure allows numerically analyze the measurements of permeability k and the drag coefficient Cd proposed relationships, like power law, for these properties on various modeling schemes. The purpose of this research is to study the variability provided by these heterogeneities where the velocity field and other details of viscous fluid dynamics are obtained by solving numerically the continuity and Navier-Stokes equations at pore level and observe how the fractal dimension of fractionation of the model can affect their hydrodynamic properties. This study were considered two classes of models, models with constant porosity, MPC, and models with varying porosity, MPV. The results have allowed us to find numerical relationship between the permeability, drag coefficient and the fractal dimension of fractionation of the medium. Based on these numerical results we have proposed scaling relations and algebraic expressions involving the relevant parameters of the phenomenon. In this study analytical equations were determined for Dff depending on the geometrical parameters of the models. We also found a relation between the permeability and the drag coefficient which is inversely proportional to one another. As for the difference in behavior it is most striking in the classes of models MPV. That is, the fact that the porosity vary in these models is an additional factor that plays a significant role in flow analysis. Finally, the results proved satisfactory and consistent, which demonstrates the effectiveness of the referred methodology for all applications analyzed in this study.

Emprego da citometria de fluxo na avaliação do perfil imunofenotípico de pacientes com leucemia linfocítica crônica

Chronic lymphocytic leukemia (B-CLL) is a clonal proliferation of mature B lymphocytes characterized by indolent clinical course. Biologically this clonallity is characterized by low expression of surface immunoglobulin (sIg) with restriction to a single immunoglobulin light chain associated with high expression of CD5 antigen and positivity to B cell antigens lymphocytes such as CD19, CD20 and CD23 and negativity to FMC7. The immunological profile and morphological analysis of lymphoid cells are the main means for the differential diagnosis of B-CLL from other chronic lymphoproliferative diseases. The aim of this study was to evaluate the expression pattern of a variety of membrane antigens in leukemic cells originating from patients with B-CLL. In this study, peripheral blood samples from 80 patients with B-CLL were analyzed by multiparametric flow cytometry in addition to routine hematologic exams, using a panel of monoclonal antibodies (MoAb): CD45/CD14, CD3/CD19/CD45, CD4/CD8 / CD3, CD20/CD5/CD3, CD3/CD16-56/CD45, CD2/CD7, FMC7/CD23, CD103/CD22/CD20, HLADR/CD38, CD10/CD19, CD1a, CD11b and also IgM/gD, kappa and lambda immunoglobulin light chains for the detection of surface immunoglobulin and clonal restriction for immunoglobulin light chain. The Hematological data were obtained from the hematological analyzer and cytomorphological analysis in blood film stained by Leishmann. The study samples consisted of 45 men and 35 women, ages ranging from 55 to 84 years (mean 65 years). Complete white blood count showed count ranging from 10.0 to 42.0 x 109/l. (mean 50.0 x 109/l) and lymphocytes count greater than 5.0 x 109/l in all cases. The neoplastic cells displayed B-CLL phenotype (CD5+/CD19+/CD20+/HLADR+/CD23+) in the vast majority of the cases, associated to failed to stain for T cell markers (CD1a, CD2, CD4, CD3, CD7, CD8), CD103, CD14 and FMC7. Leukemic cells of most patients also expressed low intensity of IgM and IgD with restricted kappa light chain, in most cases (59,7%). This observation highlights the importance of immunophenotyping for correct diagnosis of chronic lymphoproliferative syndromes and the panel of MoAb used was sufficient for diagnostic confirmation of B-CLL

Avaliação dos marcadores celulares por citometria de fluxo nos portadores de leucemia mieloide aguda atendidos no Hemocentro do Rio Grande do Norte-Hemonorte

The acute myeloid leukemia (AML) is a disease in which malignant myeloblasts expand, build up and suppress normal hematopoietic activity would represent a major diagnostic challenge. With the advent of immunophenotyping by flow cytometry, the diagnosis of these tumors have become more faithful, facilitating the treatment and monitoring of patients. The objectives of this study: diagnosis and classification of AML based on immunophenotyping by flow cytometry with a panel of AcMo specific for acute leukemias, set the frequency of AML in samples from patients with acute leukemias sent to the Department of Hematology Blood Center of Rio Grande do Norte - HEMONORTE, establish standards of antigen expression for different subtypes of acute leukemia and its correlation with the newly diagnosed cases refractory to treatment and recurrence of the disease, standardization of methods for detection and labeling of surface antigens by flow cytometry and intracytoplasmic flow, and observe the frequency of acute leukemia with aberrant phenotypes rare. During the study, 351 were diagnosed acute leukemia, and 179 (51%) classified as AML and 172 (49%) and ALL, which were excluded from the present work. Of the 179 AML, 92 (51.4%) were female and 87 (48.6%) were male, with ages ranging from 3 to 95 years of ag, with higher incidence in individuals in the age group of 41 to 65. Splenomegaly was the clinical finding more present, a total of 147 cases (82.1%), followed by hepatomegaly present in 132 cases (73.7%). The hemorrhagic events were observed in 55 cases (30.7%). Lymphadenopathy in turn was detected in 20 of 179 cases (11.2%). In order to classify subtypes of AML, we used a large panel of monoclonal antibodies, obtaining the following results: AML M0, 02 (1.1%) AML M1, 40 (22.3) AML M2, 60 (33.5) AML M3, 22 (12.3%) AML M4, 10 (5.6) AML M5, 13 (7.3%) AML M6 06 (3.4%) and AML M7 01 (0.6%). We observed some cases with aberrant expression of some antigens such as CD7, CD4, CD19, CD3, CD5 and TdT, CD 7 was present in 30 (16.8%), CD4 in 5 (2.8%), the CD 3 in 5 (2.8%), the CD19 in 3 (1.7%), the CD5 in 3 (1.7%) and TDT was in 7 (3.9%) cases of AML .the CD8 and CD79a was present in only a 1 case.

Cultura e consumo: o fluxo dos bens

It is an ethnographic work that has an objective of verifying devices throngh the residents of a low income suburban area, and the way they deal with their social relations through sonsumerism (and the aspiration connected to it), the symbolic character acquired through consumer goods, understood as one of the fundamental components for the comprehension of the web as relations that established, Though consumerism, individuais will reveal ways of communication, of the status, of creating new forms of action and identification. Using the principal that believes in a web of symbolic significance where own individuais develop their impressions, as a resource to look at their own bodies, a social order (yet unstable), and the process of inclusion in a broader society. In conclusion, the act of consuming is more than a perspective that establishes statistics on consumer goods, with their ways of production, circulation and economic functioning: it is also a way of perceiving a collection mapped by consumers individually and socially, and by those means organizing, classifying and identifyring the social world

Contagem de reticulócitos de cães saudáveis ou anêmicos pela citometria de fluxo

Compararam-se os resultados da contagem de reticulócitos pela microscopia de luz e pelo método da citometria de fluxo em 25 cães saudáveis (controle), 60 cães com anemia regenerativa e 40 com anemia arregenerativa. Houve diferença nas contagens absolutas obtidas pela microscopia de luz e pela citometria de fluxo nos três grupos estudados. A contagem de reticulócitos foi mais alta pela citometria de fluxo que a contagem pela microscopia de luz, mostrando ser um método mais sensível, simples e seguro para a quantificação de reticulócitos.

Comparação de marcadores de fase sólida para medir fluxo de matéria seca e matéria orgânica no duodeno

Two external markers (chromic oxide and ytterbium chloride) and two internal markers (indigestible neutral detergent fiber-NDF and indigestible acid detergent fiber-ADF) were compared in order to determine the flow of dry and organic matter in the duodenum. Three steers with ruminal and duodenal cannulas were fed with roughage: concentrate ratios of 80:20 60:40 and 40:60. As these ratios as well as animals and experimental periods did not show significant effects, only markers will be discussed the flow of the duodenal dry matter were 3816.8, 3269.3, 2739.2 and 2713.2g/day and of the organic matter were 3305.1, 2841.6, 2392.2 and 2351.3g/day estimated by chromic oxide, ytterbium chloride, indigestible NDF and indigestible ADF, respectively. The coefficients of ruminal digestion of the dry matter expressed as a percentage of the total digested were 38.8, 57.8, 80.2 and 81.9% and organic matter were 48.4, 65.3 84.8 and 85.7, when estimated by chromic oxide, ytterbium chloride, indigestible NDF and indigestible ADF, respectively. Ir was concluded that different markers lead to different estimation of duodenal flow and indigestible NDF and indigestible ADF are equivalent markers.

Produção Fecal e Fluxo Duodenal de Matéria Seca e Matéria Orgânica Estimados por Meio de Indicadores

O objetivo deste trabalho foi comparar os indicadores internos, fibra em detergente neutro e fibra em detergente ácido indigestíveis, obtidos após 144h de incubação in vitro e in situ (FDNiv; FDNis; FDAiv; FDAis) com o indicador externo, o óxido crômico (Cr2O3), para estimativas da produção fecal, do fluxo duodenal de matéria seca e matéria orgânica em novilhos mestiços (HxZ) confinados. Foram utilizadas dietas à base de silagens de milho, de raspa e de casca de mandioca, e também de cana-de-açúcar ensilada com polpa cítrica peletizada. Os novilhos foram castrados e canulados no rúmen e no duodeno. O período experimental teve 11 dias de adaptação às dietas e 8 dias de coleta. O delineamento experimental foi o quadrado latino (4x4), com quatro tratamentos, num arranjo em parcela subdividida, sendo as dietas estudadas nas parcelas, e os indicadores nas subparcelas. Os resultados obtidos em percentagem do peso vivo para a estimativa da produção fecal, utilizando-se os diferentes indicadores, mostraram que a FDAiv (0,88 %), a FDAis (0,85 %) e o Cr2O3 (0,99 %), embora com diferenças significativas, podem ser utilizados pelos resultados biologicamente consistentes. Para estimar o fluxo duodenal de matéria seca e matéria orgânica, foram utilizados os valores de produção fecal obtidos com a FDAiv. Os indicadores internos não apresentaram diferenças entre si para o fluxo duodenal de matéria seca, com média de 3,29 kg/dia, porém o óxido crômico superestimou o fluxo (4,95 kg/dia). Para o fluxo duodenal de matéria orgânica não houve diferença entre os indicadores com média de 2,73 kg/dia.

Comparação de marcadores para estimativas de produção fecal e de fluxo de digesta em bovinos

Foram realizados três experimentos procurando avaliar a utilização de dois marcadores internos (FDN e FDA indigestíveis), obtidos por meio da incubação in vitro e in situ, e de um marcador externo (óxido crômico) para estimativa da produção fecal e do fluxo da digesta duodenal em bovinos. Para análise dos dados, adotou-se o delineamento em blocos inteiramente ao acaso, sendo os tratamentos distribuídos em esquema fatorial, constituindo cinco marcadores e três volumosos. Os teores de FDN e FDA indigestíveis mostraram-se variáveis para cada volumosos, independentemente da metodologia utilizada (in vitro ou in situ), indicando que possivelmente a incubação por 144 horas não reproduz a fração indigestível total. As estimativas de produção fecal e de fluxo da digesta duodenal, obtidas por intermédio dos marcadores avaliados, apresentaram comportamento bastante diferenciado de acordo com cada volumoso. Os marcadores internos (FDN e FDA indigestíveis) podem ser utilizados como preditores dos parâmetros avaliados, desde que alguns cuidados sejam tomados na sua determinação.

Controle vetorial de velocidade de uma máquina de indução sem mancais trifásica com bobinado dividido utilizando estimação neural de fluxo

This work describes the study and the implementation of the vector speed control for a three-phase Bearingless induction machine with divided winding of 4 poles and 1,1 kW using the neural rotor flux estimation. The vector speed control operates together with the radial positioning controllers and with the winding currents controllers of the stator phases. For the radial positioning, the forces controlled by the internal machine magnetic fields are used. For the radial forces optimization , a special rotor winding with independent circuits which allows a low rotational torque influence was used. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed and radial positioning controllers to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The DSP resources used by the system are: the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Controle vetorial de velocidade de um motor de indução trifásico com estimação neural de fluxo

This work describes the study and the implementation of the speed control for a three-phase induction motor of 1,1 kW and 4 poles using the neural rotor flux estimation. The vector speed control operates together with the winding currents controller of the stator phasis. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed controls to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The main DSP recources used by the system are, respectively, the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Proposição de um modelo para análise de fluxo de carga, curto-circuito e simulação de relés de produção

The objective of the present work is develop a model to simulate electrical energy networks in transient and stead states, using the software ATP (Alternative Transient Program), able to be a way to join two distinct themes, present in classical methodology planning networks: short circuit analysis and load flow theory. Beyond that, using a tool for relay simulation, this paper intend to use the new developed model to investigate the influence of transient phenomenon in operation of protection relays, and calibrate the enterprise's protections relays. For testing the model, some relays, actually, installed at COSERN were used