Caimanes and the Water - Infinite Legal Struggles about a Finite Good

This report is intended to shed more light on the ongoing water struggle in Caimanes, a small urban area in the central northern area of Chile, neighbouring Latin America’s biggest tailings dam. Undoubtedly, the water in Caimanes is running out and the conflict between the opponents of the dam and its owner, a multinational copper enterprise, is getting more and more attention by the national and also international media. In the discussion a judgment of the Chilean Supreme Court from last October plays a central role, because it is said to have granted the people from Caimanes their right to water. After a short introduction with some details about Camaines and the tailings from the dam El Mauro, the key points of this judgment shall be outlined. The final part of the report is dedicated to various institutional problems of the Chilean resources law and policy that can become virulent for the water supply and the environmental well-being of many other urban areas in the industrialized north of Chile.

Modeling and Analysis of Two-Part Type Manufacturing Systems

This paper presents a model and analysis of a synchronous tandem flow line that produces different part types on unreliable machines. The machines operate according to a static priority rule, operating on the highest priority part whenever possible, and operating on lower priority parts only when unable to produce those with higher priorities. We develop a new decomposition method to analyze the behavior of the manufacturing system by decomposing the long production line into small analytically tractable components. As a first step in modeling a production line with more than one part type, we restrict ourselves to the case where there are two part types. Detailed modeling and derivations are presented with a small two-part-type production line that consists of two processing machines and two demand machines. Then, a generalized longer flow line is analyzed. Furthermore, estimates for performance measures, such as average buffer levels and production rates, are presented and compared to extensive discrete event simulation. The quantitative behavior of the two-part type processing line under different demand scenarios is also provided.

Sistema de gestió integral d’ un restaurant amb TPV i Pocket PC

Aquest projecte fi de carrera es centra en un restaurant fictici i genèric anomenat "El Restaurant al Punt". Es tractarà d' una empresa que s' inicia en el sector hostaler amb tot un seguit de coneixements previs per part dels propietaris. L' objectiu principal que es preten assolir en aquest projecte és: desenvolupar l' anàlisi, dissenyar i implementar una aplicació informàtica que permeti gestionar el funcionament d' un restaurant

El Cas integrat. Un aprenentatge integral i integrador. L'experiència de l'Escola Universitària d'Infermeria Sant Joan de Déu de Barcelona

Potenciar una Europa del coneixement on l’aprenentatge continuat durant la vida és un element essencial per a obtenir una major competitivitat Europea, a l’hora que es promociona la cooperació i mobilitat entre universitats, és l’objectiu principal de l’Espai Europeu d’Educació Superior. Sota aquesta directriu, és necessari potenciar la reflexió i la capacitat crítica de les persones en formació. Crear espais on l’alumne/a passi a ser el centre dels processos d’ensenyança-aprenentatge, on es faciliti que reflexioni sobre allò que està fent i com ho fa, quins processos segueix per entendre situacions i com les interpreta. Potenciar que l’alumne/a aprengui a aprendre, aprendre per la vida, perquè sigui una persona amb ment oberta i capaç d’adaptar-se i modificar la realitat quan sigui necessari. L’EUI Sant Joan de Déu, que es caracteritza pel seu esperit innovador i la sensibilitat envers els canvis, implanta una nova metodologia docent anomenada Cas Integrat (C.I.). El Cas Integrat és una activitat docent que facilita a l’estudiant comprendre les diferents temàtiques que el composen de forma integrada i a la vegada integradora amb l’equip, posicionant-se activament en el seu aprenentatge. És un mètode que es nodreix dels principis de l’aprenentatge basat en problemes (ABP). Es tracta de la descripció d’una situació hipotètica construïda a través de les aportacions dels diferents professors que participen en el cas. És una metodologia docent que es diferencia de les que s’havia utilitzat fins ara. En aquest mètode s’aglutinen continguts de diferents assignatures, que comporta un treball conjunt i continuat del professorat. Ressaltem que el C. I. fomenta el treball en equip, la responsabilitat en l’aprenentatge, augmenta la relació entre els tutors i els estudiants i també potencia la visió integral dels continguts curriculars. També és cert que ens hem trobat amb dificultats com limitacions per part d’alguns estudiants a l’hora de buscar informació, reticències per part d’alguns estudiants en la manera com hem construït els grups, la complexitat a l’hora d’avaluar ja que s’avaluen molts ítems i el fet de compaginar horaris

Role of the cultural values as a key part in the implementing of healthy practices : exploratory research

El concepto de organización saludable cada vez toma más fuerza en el ámbito empresarial y académico, a razón de su enfoque integral y al impacto generado en distintos grupos de interés. Debido a su reciente consolidación como concepto, existe un limitado cuerpo de investigación en torno al tema. Para contribuir a la generación de conocimiento en este sentido, se desarrolló un estudio exploratorio el cual tenía como objetivo identificar la relación existente entre la implementación de prácticas saludables en las organizaciones y los valores culturales. En el estudio participaron 66 sujetos a quienes se les administró un cuestionario compuesto por nueve variables, cinco provenientes del modelo de Hofstede (1980) y cuatro más que evaluaban la implementación de prácticas organizacionales saludables. Los resultados obtenidos muestran que los valores culturales predicen la implementación de prácticas saludables.

Análisis de los instrumentos de gestión ambiental en el proceso de recuperación integral de la cuenca Río Fucha

El interés de esta monografía es hacer un seguimiento a los instrumentos de gestión ambiental en el proceso de recuperación integral de la cuenca del río Fucha. Se busca a partir de la caracterización de los procesos que han llevado al deterioro actual de la misma identificar las intervenciones que se han realizado por parte del Estado y por parte de la comunidad, con el fin de establecer unos lineamientos y recomendaciones sobre posibilidades de mejoramiento de las condiciones ambientales de la cuenca. De todo el proceso se puedo inferir que la gestión ambiental desde los actores involucrados ha sido insuficiente y puede articularse a los demás instrumentos de planeación y desarrollo, que permitan garantizar que la población mejores condiciones de participación en la construcción de su territorio y genere apropiación sobre el mismo.

Deliberation as a core part of teacher education and civics classrooms

Resumen basado en el de la publicación

A combined BIE-FE method for the Stokes equations

A numerical algorithm for the biharmonic equation in domains with piecewise smooth boundaries is presented. It is intended for problems describing the Stokes flow in the situations where one has corners or cusps formed by parts of the domain boundary and, due to the nature of the boundary conditions on these parts of the boundary, these regions have a global effect on the shape of the whole domain and hence have to be resolved with sufficient accuracy. The algorithm combines the boundary integral equation method for the main part of the flow domain and the finite-element method which is used to resolve the corner/cusp regions. Two parts of the solution are matched along a numerical ‘internal interface’ or, as a variant, two interfaces, and they are determined simultaneously by inverting a combined matrix in the course of iterations. The algorithm is illustrated by considering the flow configuration of ‘curtain coating’, a flow where a sheet of liquid impinges onto a moving solid substrate, which is particularly sensitive to what happens in the corner region formed, physically, by the free surface and the solid boundary. The ‘moving contact line problem’ is addressed in the framework of an earlier developed interface formation model which treats the dynamic contact angle as part of the solution, as opposed to it being a prescribed function of the contact line speed, as in the so-called ‘slip models’. Keywords: Dynamic contact angle; finite elements; free surface flows; hybrid numerical technique; Stokes equations.

Boundary integral methods in high frequency scattering

In this article we review recent progress on the design, analysis and implementation of numerical-asymptotic boundary integral methods for the computation of frequency-domain acoustic scattering in a homogeneous unbounded medium by a bounded obstacle. The main aim of the methods is to allow computation of scattering at arbitrarily high frequency with finite computational resources.

Modelling the lava dome extruded at Soufrière Hills Volcano, Montserrat, August 2005–May 2006. Part I: Dome shape and internal structure

Lava domes comprise core, carapace, and clastic talus components. They can grow endogenously by inflation of a core and/or exogenously with the extrusion of shear bounded lobes and whaleback lobes at the surface. Internal structure is paramount in determining the extent to which lava dome growth evolves stably, or conversely the propensity for collapse. The more core lava that exists within a dome, in both relative and absolute terms, the more explosive energy is available, both for large pyroclastic flows following collapse and in particular for lateral blast events following very rapid removal of lateral support to the dome. Knowledge of the location of the core lava within the dome is also relevant for hazard assessment purposes. A spreading toe, or lobe of core lava, over a talus substrate may be both relatively unstable and likely to accelerate to more violent activity during the early phases of a retrogressive collapse. Soufrière Hills Volcano, Montserrat has been erupting since 1995 and has produced numerous lava domes that have undergone repeated collapse events. We consider one continuous dome growth period, from August 2005 to May 2006 that resulted in a dome collapse event on 20th May 2006. The collapse event lasted 3 h, removing the whole dome plus dome remnants from a previous growth period in an unusually violent and rapid collapse event. We use an axisymmetrical computational Finite Element Method model for the growth and evolution of a lava dome. Our model comprises evolving core, carapace and talus components based on axisymmetrical endogenous dome growth, which permits us to model the interface between talus and core. Despite explicitly only modelling axisymmetrical endogenous dome growth our core–talus model simulates many of the observed growth characteristics of the 2005–2006 SHV lava dome well. Further, it is possible for our simulations to replicate large-scale exogenous characteristics when a considerable volume of talus has accumulated around the lower flanks of the dome. Model results suggest that dome core can override talus within a growing dome, potentially generating a region of significant weakness and a potential locus for collapse initiation.

Modelling the lava dome extruded at Soufrière Hills Volcano, Montserrat, August 2005–May 2006. Part II: Rockfall activity and talus deformation

During many lava dome-forming eruptions, persistent rockfalls and the concurrent development of a substantial talus apron around the foot of the dome are important aspects of the observed activity. An improved understanding of internal dome structure, including the shape and internal boundaries of the talus apron, is critical for determining when a lava dome is poised for a major collapse and how this collapse might ensue. We consider a period of lava dome growth at the Soufrière Hills Volcano, Montserrat, from August 2005 to May 2006, during which a 100 × 106 m3 lava dome developed that culminated in a major dome-collapse event on 20 May 2006. We use an axi-symmetrical Finite Element Method model to simulate the growth and evolution of the lava dome, including the development of the talus apron. We first test the generic behaviour of this continuum model, which has core lava and carapace/talus components. Our model describes the generation rate of talus, including its spatial and temporal variation, as well as its post-generation deformation, which is important for an improved understanding of the internal configuration and structure of the dome. We then use our model to simulate the 2005 to 2006 Soufrière Hills dome growth using measured dome volumes and extrusion rates to drive the model and generate the evolving configuration of the dome core and carapace/talus domains. The evolution of the model is compared with the observed rockfall seismicity using event counts and seismic energy parameters, which are used here as a measure of rockfall intensity and hence a first-order proxy for volumes. The range of model-derived volume increments of talus aggraded to the talus slope per recorded rockfall event, approximately 3 × 103–13 × 103 m3 per rockfall, is high with respect to estimates based on observed events. From this, it is inferred that some of the volumetric growth of the talus apron (perhaps up to 60–70%) might have occurred in the form of aseismic deformation of the talus, forced by an internal, laterally spreading core. Talus apron growth by this mechanism has not previously been identified, and this suggests that the core, hosting hot gas-rich lava, could have a greater lateral extent than previously considered.

Well-posed boundary value problems for integrable evolution equations on a finite interval

We consider boundary value problems posed on an interval [0,L] for an arbitrary linear evolution equation in one space dimension with spatial derivatives of order n. We characterize a class of such problems that admit a unique solution and are well posed in this sense. Such well-posed boundary value problems are obtained by prescribing N conditions at x=0 and n–N conditions at x=L, where N depends on n and on the sign of the highest-degree coefficient n in the dispersion relation of the equation. For the problems in this class, we give a spectrally decomposed integral representation of the solution; moreover, we show that these are the only problems that admit such a representation. These results can be used to establish the well-posedness, at least locally in time, of some physically relevant nonlinear evolution equations in one space dimension.

Design of a minimum variance multiple input-multiple output neuro self-tuning proportional-integral-derivative controller for non-linear dynamic systems

In this study a minimum variance neuro self-tuning proportional-integral-derivative (PID) controller is designed for complex multiple input-multiple output (MIMO) dynamic systems. An approximation model is constructed, which consists of two functional blocks. The first block uses a linear submodel to approximate dominant system dynamics around a selected number of operating points. The second block is used as an error agent, implemented by a neural network, to accommodate the inaccuracy possibly introduced by the linear submodel approximation, various complexities/uncertainties, and complicated coupling effects frequently exhibited in non-linear MIMO dynamic systems. With the proposed model structure, controller design of an MIMO plant with n inputs and n outputs could be, for example, decomposed into n independent single input-single output (SISO) subsystem designs. The effectiveness of the controller design procedure is initially verified through simulations of industrial examples.

Condition number estimates for combined potential integral operators in acoustics and their boundary element discretisation

We consider the classical coupled, combined-field integral equation formulations for time-harmonic acoustic scattering by a sound soft bounded obstacle. In recent work, we have proved lower and upper bounds on the $L^2$ condition numbers for these formulations, and also on the norms of the classical acoustic single- and double-layer potential operators. These bounds to some extent make explicit the dependence of condition numbers on the wave number $k$, the geometry of the scatterer, and the coupling parameter. For example, with the usual choice of coupling parameter they show that, while the condition number grows like $k^{1/3}$ as $k\to\infty$, when the scatterer is a circle or sphere, it can grow as fast as $k^{7/5}$ for a class of `trapping' obstacles. In this paper we prove further bounds, sharpening and extending our previous results. In particular we show that there exist trapping obstacles for which the condition numbers grow as fast as $\exp(\gamma k)$, for some $\gamma>0$, as $k\to\infty$ through some sequence. This result depends on exponential localisation bounds on Laplace eigenfunctions in an ellipse that we prove in the appendix. We also clarify the correct choice of coupling parameter in 2D for low $k$. In the second part of the paper we focus on the boundary element discretisation of these operators. We discuss the extent to which the bounds on the continuous operators are also satisfied by their discrete counterparts and, via numerical experiments, we provide supporting evidence for some of the theoretical results, both quantitative and asymptotic, indicating further which of the upper and lower bounds may be sharper.

A neural network enhanced generalized minimum variance self-tuning proportional, integral and derivative control algorithm for complex dynamic systems

A neural network enhanced proportional, integral and derivative (PID) controller is presented that combines the attributes of neural network learning with a generalized minimum-variance self-tuning control (STC) strategy. The neuro PID controller is structured with plant model identification and PID parameter tuning. The plants to be controlled are approximated by an equivalent model composed of a simple linear submodel to approximate plant dynamics around operating points, plus an error agent to accommodate the errors induced by linear submodel inaccuracy due to non-linearities and other complexities. A generalized recursive least-squares algorithm is used to identify the linear submodel, and a layered neural network is used to detect the error agent in which the weights are updated on the basis of the error between the plant output and the output from the linear submodel. The procedure for controller design is based on the equivalent model, and therefore the error agent is naturally functioned within the control law. In this way the controller can deal not only with a wide range of linear dynamic plants but also with those complex plants characterized by severe non-linearity, uncertainties and non-minimum phase behaviours. Two simulation studies are provided to demonstrate the effectiveness of the controller design procedure.