Aplicação de opções reais em projetos de automação : um estudo de caso na indústria de cerveja

Projetos de automação industrial são avaliados financeiramente através dos métodos bastante utilizados de Valor Presente Líquido (VPL) e Taxa Interna de Retorno (TIR). Estudos recentes mostram uma tendência para a utilização de outros métodos para realizar esta avaliação. Este trabalho explora o método alternativo de Opções Reais para avaliação desses projetos que busca se aproximar mais do mundo real considerando maior incerteza e flexibilidade do que o VPL. Inicialmente será feita uma revisão de literatura focando o método binomial dentro de Opções Reais. A metodologia proposta é um estudo de caso de um projeto no mercado de cerveja no Brasil, utilizando como fonte uma empresa multinacional de grande porte fornecedora desse projeto. Posteriormente será feita uma análise financeira primeiramente utilizando somente o VPL e posteriormente incorporando o método binomial de Opções Reais, resultando no VPL estendido. O objetivo é precificar a flexibilidade das Opções Reais presentes no contrato de fornecimento do projeto em estudo que normalmente não são consideradas. Com isso pretende-se verificar se o método binomial de Opções Reais faz real diferença no projeto em estudo.

análise experimental do efeito da diversificação em carteiras de ações: a relação entre risco e quantidade de ativos sob a ótica da estratégia ingênua

The objective is to analyze the relationship between risk and number of stocks of a portfolio for an individual investor when stocks are chosen by "naive strategy". For this, we carried out an experiment in which individuals select actions to reproduce this relationship. 126 participants were informed that the risk of first choice would be an asset average of all standard deviations of the portfolios consist of a single asset, and the same procedure should be used for portfolios composed of two, three and so on, up to 30 actions . They selected the assets they want in their portfolios without the support of a financial analysis. For comparison we also tested a hypothetical simulation of 126 investors who selected shares the same universe, through a random number generator. Thus, each real participant is compensated for random hypothetical investor facing the same opportunity. Patterns were observed in the portfolios of individual participants, characterizing the curves for the components of the samples. Because these groupings are somewhat arbitrary, it was used a more objective measure of behavior: a simple linear regression for each participant, in order to predict the variance of the portfolio depending on the number of assets. In addition, we conducted a pooled regression on all observations by analyzing cross-section. The result of pattern occurs on average but not for most individuals, many of which effectively "de-diversify" when adding seemingly random bonds. Furthermore, the results are slightly worse using a random number generator. This finding challenges the belief that only a small number of titles is necessary for diversification and shows that there is only applicable to a large sample. The implications are important since many individual investors holding few stocks in their portfolios

Tributação, finanças públicas e política fiscal: uma análise sob a óptica do direito e economia

In the Brazilian legal scenario, the study of taxation has traditionally been restricted to positivist analysis, concerned with investigating the formal aspects of the tax legal rule. Despite its relevance to the formation of the national doctrine of tax, such formalist tradition limits the discipline, separating it from reality and the socioeconomic context in which the Tax Law is inserted. Thus, the proposal of the dissertation is to examine the fundamentals and nature of taxation and tax legal rules from the perspective of Law and Economics (Economic Analysis of Law). For this purpose, the work initially reconnects the Tax Law and Science of Finance (or Public Finance) and Fiscal Policy, undertaking not only a legal analysis, but also economic and financial analysis of the theme. The Economics of Public Sector (or Modern Public Finance) will contribute to the research through topics such as market failures and economic theory of taxation, which are essential to an economic approach to Tax Law. The core of the work lies in the application of Law and Economics instruments in the study of taxation, analyzing the effects of tax rules on the economic system. Accordingly, the dissertation examines the fundamental assumptions that make up the Economic Analysis of Law (as the concept of economic efficiency and its relation to equity), relating them to the tax phenomenon. Due to the nature of the Brazilian legal system, any worth investigation or approach, including Law and Economics, could not pass off the Constitution. Thus, the constitutional rules will serve as a limit and a prerequisite for the application of Law and Economics on taxation, particularly the rules related to property rights, freedom, equality and legal certainty. The relationship between taxation and market failures receives prominent role, particularly due to its importance to the Law and Economics, as well as to the role that taxation plays in the correction of these failures. In addition to performing a review of taxation under the approach of Economic Analysis of Law, the research also investigates the reality of Brazilian tax system, applying the concepts developed in relevant cases and issues to the national scene, such as the relationship between taxation and development, the compliance costs of taxation, the tax evasion and the tax enforcement procedure. Given the above, it is intended to lay the groundwork for a general theory of Economic Analysis of Tax Law, contextualizing it with the Brazilian tax system

Income evaluation of small - scale fishers in two brazilian urban reservoirs: Represa Billings (SP) and Lago Paranoá (DF)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise econômica preliminar da implantação de incinerador de resíduos sólidos urbanos na região de Bauru

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Risco de crédito: uma abordagem utilizando análise discriminante, regressão logística e redes neurais artificiais

Considering the relevance of researches concerning credit risk, model diversity and the existent indicators, this thesis aimed at verifying if the Fleuriet Model contributes in discriminating Brazilian open capital companies in the analysis of credit concession. We specifically intended to i) identify the economic-financial indicators used in credit risk models; ii) identify which economic-financial indicators best discriminate companies in the analysis of credit concession; iii) assess which techniques used (discriminant analysis, logistic regression and neural networks) present the best accuracy to predict company bankruptcy. To do this, the theoretical background approached the concepts of financial analysis, which introduced themes relative to the company evaluation process; considerations on credit, risk and analysis; Fleuriet Model and its indicators, and, finally, presented the techniques for credit analysis based on discriminant analysis, logistic regression and artificial neural networks. Methodologically, the research was defined as quantitative, regarding its nature, and explanatory, regarding its type. It was developed using data derived from bibliographic and document analysis. The financial demonstrations were collected by means of the Economática ® and the BM$FBOVESPA website. The sample was comprised of 121 companies, being those 70 solvents and 51 insolvents from various sectors. In the analyses, we used 22 indicators of the Traditional Model and 13 of the Fleuriet Model, totalizing 35 indicators. The economic-financial indicators which were a part of, at least, one of the three final models were: X1 (Working Capital over Assets), X3 (NCG over Assets), X4 (NCG over Net Revenue), X8 (Type of Financial Structure), X9 (Net Thermometer), X16 (Net Equity divided by the total demandable), X17 (Asset Turnover), X20 (Net Equity Profitability), X25 (Net Margin), X28 (Debt Composition) and X31 (Net Equity over Asset). The final models presented setting values of: 90.9% (discriminant analysis); 90.9% (logistic regression) and 97.8% (neural networks). The modeling in neural networks presented higher accuracy, which was confirmed by the ROC curve. In conclusion, the indicators of the Fleuriet Model presented relevant results for the research of credit risk, especially if modeled by neural networks.

A manutenção do equilíbrio econômico de contratos de obras públicas empreitadas: parâmetros para o estudo de riscos vinculados a atrasos no encaixe do preço

Dentre os diversos segmentos do Setor da Construção Civil, um dos principais é o de obras por empreitada global, que são aquelas contratadas por preço certo e total. As obras públicas, que têm como finalidade atender a uma utilidade pública e cujos contratos são regidos pela Lei 8.666/93, são geralmente contratadas sob esse regime de execução. O artigo 58 desta Lei determina que deva ser mantido o equilíbrio econômicofinanceiro dos contratos celebrados com o Poder Público. A fundamentação teórica trata dos conceitos de obras públicas, dos principais aspectos da Lei 8.666/93, de análise econômico-financeira e de análise de riscos. Este trabalho apresenta também uma sistemática e uma simulação numérica para formação de preços para obras empreitadas de Construção Civil. O objetivo geral deste trabalho é a criação de parâmetros para o estabelecimento de margens de proteção para a dilatação do prazo e respectivos encaixes de preços, visando, como determina a Lei 8.666/93, a manutenção do equilíbrio original. Com base na análise dos resultados de 63 obras, verifica-se a manutenção do equilíbrio econômico-financeiro, comparando-se a taxa de retorno restrita esperada pelas empresas no momento das licitações com a realmente alcançada na operação. A partir dos desvios detectados nas taxas de retorno nesses dois momentos, cria-se, pelo processo de simulação e análise de sensibilidade, parâmetros para cobertura dos referidos riscos. No momento da licitação, a taxa de retorno restrita média das obras analisadas é de 9,45% ao mês. No segundo momento, essa taxa cai para em média para 5,16% ao mês. Isto representa, em média, uma variação de 45,39%. A taxa média de atratividade das obras públicas analisadas está dentro do intervalo de 6% a 13% ao mês. Como parâmetro de cobertura de riscos quanto aos desvios de prazo e encaixe do preço, tem-se o intervalo de 1,5% a 11,5% do preço. Portanto, entre as obras analisadas, não existe o equilíbrio econômico-financeiro.

Banco do Vaticano: uma análise econômico-financeira

This thesis work aims to bring a better viewing on an atypical case of financial analysis. The lstituto per le Opere di Religione (IOR), commonly known as the Vatican Bank, has peculiarities according to its goals as a bank. Belonging to a Catholic religious congregation, IOR has been used to manage the resources of the church, and ensure that these resources are used for the operation of it and, also for religious works. However the financial transactions made by the bank remained secret throughout its existence until mid 2012. This feature of not providing relevant information at the local and international community brought harm. Several cases of corruption and money laundering came up, bringing scandals that cause bad looks for the religious entity. In order to interact with the international community and understanding the importance of it, the Roman Apostolic Catholic Church decides to joing the international accounting procedures (IFRS) and went on to provide yearly financial statement reports and other information from its bank from 2012 . Thus, this thesis work takes on the role of analyzing the financial statements of the IOR and present its economic and financial health from the Capital Structure ratios, liquidity and profitability in the period 2012-2014. Overall, there has been a significant reduction in indebtedness 548% in 2012 to 362% in 2014. However, such an index showing is still high. In addition, the debt profile remained bad (87.47% short-term in 2014). The Liquidity ratios, both indices fell during the analysed period. Noteworthy is that even with retractions, the indices are equal or greater than 1, which indicates financial footing able to pay off debts. Regarding profitability, in 2013 it represented atypical moment, considering the economic performance of the IOR in the investigated period. There was decrease in profits this year, which resulted in great loss of the indicators in 2013. For the previous and subsequent...

The Effects of Privatization of State-Owned Enterprises in Poland and East Germany

The main goal of this project was to propose appropriate methods of analysing the effects of the privatisation of state-owned enterprises, methods which were then tested on a limited sample of 16 Polish and 8 German enterprises privatised in 1992. A considerable amount of information was collected relating to the six-year period 1989-1994 relating to most aspects of the companies' activities. The effects of privatisation were taken to be those changes within the enterprises which were the result of privatisation, in such areas as production, the productivity of labour and fixed assets, investments and innovations, employment and wages, economic incentives (especially for top managers), financing (internal and external sources), bad debts and economic effects (financial analysis). A second important goal was to identify the main factors which represent methodological obstacles in surveys of the effects of privatisation during a period of fundamental transformation of the entire economic system. The list of enterprises for the research was compiled in such a way as to allow for the differentiation of ownership structures of privatised firms and to permit (at least to a certain extent) the empirical verification of some hypotheses regarding the privatisation process. The enterprises selected were divided into the following three groups representing (as far as possible) various types of ownership structures or types of control: (1) enterprises control by strategic investors (domestic or foreign), (2) enterprises controlled by employees (employee-owned companies), (3) enterprises controlled by managers. Formal methods such as econometric models with varying parameters were used to separate pure privatisation effects from other factors which influence various aspects of an enterprise's working, including policies on the productivity of labour and capital, average wages, the remuneration of top managers, etc. While the group admits that their findings and conclusions cannot be treated as representative of all privatised enterprises in Poland and Germany, they found considerable convergence with their findings and those of other surveys conducted on a wider scale. The main hypotheses that were confirmed included that privatisation (especially in companies controlled by large investors and managers) leads to a significant increase in the effectiveness of these production process, growing pay differentials between different employee groups (e.g. between executives and rank-and-file employees) and between different jobs and positions within particular professional groups. They also confirmed the growing importance in incentives to top executives of incentives linked with the company's economic effects (particularly profit-related incentives), long-term incentives and the capital market.

Consultoría en el marco económico-financiero de la empresa

Muchas de las grandes iniciativas empresariales, se ven truncadas por falta de un adecuado análisis económico-financiero. Incluso, muchas grandes ideas no son implantadas correctamente en el primer intento por este motivo, y son otras personas las que consiguen posteriormente el éxito de esas brillantes ideas gracias a una correcta aproximación financiera. Las empresas necesitan definir sus objetivos, establecer las para lograrlos, identificar las personas responsables de su ejecución (sus roles y funciones) y elaborar un plan económico-financiero que recoja el estudio de inversiones necesarias, el análisis de costes, la previsión de ingresos, así como la estrategia financiera más adecuada para la captación de los fondos necesarios para llevar a cabo las acciones programadas. Una vez iniciado el proyecto empresarial, será imprescindible realizar un seguimiento y control de la evolución (integración), tomando las medidas que se estimen oportunas para mantener el rumbo adecuado durante todo el tiempo de actividad. En este trabajo, aplicaremos las metodologías y buenas prácticas de la gestión de proyectos, como marco estructurado que nos permita abordar las principales cuestiones económico-financieras a tener en cuenta a la hora de enfrentarnos a un proyecto empresarial, para contribuir, en la medida de lo posible, a que los emprendedores tengan en cuenta estas cuestiones, facilitando así el desarrollo de negocios, en un difícil entorno económico de crisis como el que actualmente estamos viviendo en España, y animando de esta manera a optar por la iniciativa emprendedora, tratando de minimizar el riesgo en base al contenido. ---ABSTRACT---Lack of adequate economic and financial analysis truncates many of the entrepreneurship and innovation programs. Because of that reason, many great ideas are not even correctly implemented on the first attempt, and the person who finds the proper financial approach, succeed. All the enterprises have to establish clear objectives, actions to accomplish those objectives, assign roles, responsibilities and executive functions to specific people. Elaborate funding plan that contains surveys on necessary investments, cost analysis, estimate the income, liquid assets and also financial strategy suitable for fundraising to finance programmed actions. Once the project has been executed it is essential to monitor and control the development and integration adopting measures accordingly to the needs. This thesis applies methodology and best practice of project management as structured framework for the principal economic and financial issues facing business project. It is necessary contribution to entrepreneurs understanding of business, therefore facilitates business development in such rough environment as Spain is at this moment, and at the same time encourages adopting entrepreneur’s solution as less risky one. This document aims to explore all the economic and financial issues from methodological point of view based on my own professional experience, resulting in helping to understand the importance that economy and finances have in developing adequate corporate strategy. Crisis has highlighted inadequate functionality of many companies. Most popular first symptom is lack of cash flow that deteriorates the company, and results in suspension of payments followed by closing. In other cases, difficulties appear due to poor financial management of committed resources; to be observed in lack of prevision and planning or incorrect basic functionality and operational matters on daily basis. What would be your advice to someone who have magnificent business idea however no knowledge on how to handle finances in order to succeed in initiating and executing the project? Despite of the fact that the central nucleus of this paper is at economics and finances area, all the other concepts and topics given during master will be revived; for example business strategy, consultants abilities, organization and standard processes, among others, are impregnated with knowledge of project management.

Escuela infantil de cocina CookLand

El objetivo de este documento es desarrollar un plan de negocio, para analizar la viabilidad de la puesta en marcha de una nueva empresa, una escuela de cocina infantil. Inicialmente la empresa se plantea con la opción de venta de dos productos, uno que serían las propias clases de cocina, con diversas temáticas y un segundo producto, que aprovechando las instalaciones consistirá en la opción de celebrar cumpleaños o fiestas infantiles, donde los niños cocinaran su propia merienda. La escuela se abriría en el municipio de Coslada, en la comunidad de Madrid, por lo que todos los reglamentos o requerimientos legales e impuestos se analizaran dentro del prisma de dicho municipio y comunidad autónoma. El Plan de negocio analizara los siguientes aspectos: - Estrategia: creación del plan estratégico de la empresa: Análisis y selección de las estrategias (misión, visión, etc, de la empresa), estudio de competencias, etc. - Marketing: Definición de productos, canales de comunicación con los posibles clientes y desarrollo del pricing de los productos. - Financiero: Análisis del impacto financiero de la apertura y funcionamiento del proyecto.---ABSTRACT---The aim of this document is to develop a business plan to analyze the feasibility of launching a new business, a school for children kitchen. Initially the company raises two products, own cooking classes, with different themes and a second product through which the facilities for children's birthday celebration where children can take advantage cook their own snacks. The school would open in the town of Coslada, in Madrid, so that all regulations and legal requirements and fees will be analyzed within the prism of that community. The Business Plan will analyze aspects of: - Strategy: creation of the strategic plan of the company: Analysis and selection of strategies (mission, vision, etc, of the company), study skills, etc. - Marketing: Definition of products, channels of communication with potential customers and development product’s pricing. - Financial Analysis of the financial impact of the opening and operation of the project.

Certificación energética mediante la herramienta CE3X y rehabilitación energética de una vivienda unifamiliar

El siguiente proyecto lleva a cabo un estudio sobre la eficiencia energética en una vivienda unifamiliar basándose en la legislación actual europea y española. Para empezar se obtendrá la calificación energética del inmueble mediante el programa informático de la opción simplificada CE3X. A continuación se proporcionará un estudio con las medidas de mejora más adecuadas para mejorar la eficiencia energética de la vivienda, las medidas que se llevarán a cabo serán: la mejora de la envolvente térmica, mejorando el aislamiento de la fachada y la sustitución de ventanas, la instalación de una caldera de biomasa y la instalación de un sistema de colectores solares para cubrir la demanda de calefacción y ACS. Para finalizar se realiza un presupuesto de las medidas de mejoras propuestas, así como un análisis económico y una planificación y programación temporal. ABSTRACT The object of this Project is to carry out a study on the energy efficiency of a single family home in accordance with the present European and Spanish legislation. The first step is to obtain the home energy efficiency by means of a CE3X computer program. The second step is a study with the most appropriate improvement measures is provided in order to improve the home energy efficiency. The measures to be carried out will be as follows: improving the heat insulation, as well as, the facade heat insulation and replacing the windows, installing a biomass heating system and a solar collector in order to satisfy the heating and domestic hot water (DHW) demands. Finally a budget with the proposed improvement measures is made as well as a financial analysis and a time planning and programming of the project.

Análisis técnico y financiero de las máquinas de elevación

Los nombres que se usan actualmente para las grúas los ponen las empresas fabricantes y muy frecuentemente no tienen relación con su tipología ni con su capacidad. Por otra parte, es de uso común en la construcción, llamar a las grúas usando su tonelaje nominal que coincide normalmente con su capacidad máxima que se obtiene a radio mínimo. Existe una controversia por el uso de este valor ya que no suele definir bien la capacidad de las maquinas. En cuanto el radio de trabajo se aleja de sus valores mínimos, las grúas están limitadas por el momento de vuelco que no tiene porque comportarse de manera proporcional o ni siquiera relacionada con el valor de la capacidad nominal. Esto hace que comparar grúas mediante sus capacidades nominales (que son sus denominaciones) pueda inducir a errores importantes. Como alternativa, se pretende estudiar el uso de momento máximo de vuelco MLM por sus siglas en ingles (Maximum Load Moment) para intentar definir la capacidad real de las grúas. Se procede a realizar un análisis técnico y financiero de grúas con respecto a ambos valores mencionados con objeto de poder determinar cual de los dos parámetros es más fiable a la hora de definir la capacidad real de estas maquinas. Para ello, se seleccionan dentro de las tres tipologías más importantes por su presencia e importancia en la construcción (grúas de celosía sobre cadenas, grúas telescópicas sobre camión y grúas torre) nueve grúas de distintos tamaños y capacidades con objeto de analizar una serie de parámetros técnicos y sus costes. Se realizan de este modo diversas comparativas analizando los resultados en función de las tipologías y de los tamaños de las distintas maquinas. Para cada máquina se obtienen las capacidades y los momentos de vuelco correspondientes a distintos radios de trabajo. Asimismo, se obtiene el MLM y el coste hora de cada grúa, este último como suma de la amortización de la máquina, intereses del capital invertido, consumos, mantenimiento y coste del operador. Los resultados muestran las claras deficiencias del tonelaje nominal como valor de referencia para definir la capacidad de las grúas ya que grúas con el mismo tonelaje nominal pueden dar valores de capacidad de tres a uno (e incluso mayores) cuando los radios de trabajo son importantes. A raiz de este análisis se propone el uso del MLM en lugar del tonelaje nominal para la denominación de las grúas ya que es un parámetro mucho más fiable. Siendo conscientes de la dificultad que supone un cambio de esta entidad al tratarse de un uso común a nivel mundial, se indican posibles actuaciones concretas que puedan ir avanzando en esa dirección como seria por ejemplo la nomenclatura oficial de los fabricantes usando el MLM dentro del nombre de la grúa que también podría incluir la tipología o al menos alguna actuación legislativa sencilla como obligar al fabricante a indicar este valor en las tablas y características de cada máquina. El ratio analizado Coste horario de la grúa / MLM resulta ser de gran interés y permite llegar a la conclusión que en todas las tipologías de grúas, la eficiencia del coste por hora y por la capacidad (dada por el MLM) aumenta al aumentar la capacidad de la grúa. Cuando los tamaños de cada tipología se reducen, esta eficiencia disminuye y en algunos casos incluso drasticamente. La tendencia del mundo de la construcción de prefabricación y modularización que conlleva pesos y dimensiones de cargas cada vez más grandes, demandan cada vez grúas de mayor capacidad y se podría pensar en un primer momento que ante un crecimiento de capacidades tan significativo, el coste de las grúas se podría disparar y por ello disminuir la eficiencia de estas máquinas. A la vista de los resultados obtenidos con este análisis, no solo no ocurre este problema sino que se observa que dicho aumento de tamaños y capacidades de grúas redunda en un aumento de su eficiencia en cualquiera de las tipologías de estas maquinas que han sido estudiadas. The crane names that are actually used are given by crane manufacturers and, very frequently, they do not have any relationship with the crane type nor with its capacity. On the other hand, it is common in construction to use the nominal capacity (which corresponds in general to the capacity at minimum radius) as crane name. The use of this figure is controversial since it does not really reflect the real crane capacity. When the working radius increases a certain amount from its minimum values, the crane capacity starts to be limited by the crane tipping load and the moment is not really related to the value of the nominal capacity. Therefore, comparing cranes by their nominal capacity (their names) can lead to important mistakes. As an alternative, the use of the maximum load moment (MLM) can be studied for a better definition of real crane capacity. A technical and financial analysis of cranes is conducted using both parameters to determine which one is more reliable in order to define crane’s real capacity. For this purpose, nine cranes with different sizes and capacities will be selected within the most relevant crane types (crawler lattice boom cranes, telescopic truck mounted cranes and tower cranes) in order to analyze several parameters. The technical and economic results will be compared according to the crane types and sizes of the machines. For each machine, capacities and load moments are obtained for several working radius as well as MLM and hourly costs of cranes. Hourly cost is calculated adding up depreciation, interests of invested capital, consumables, maintenance and operator’s cost. The results show clear limitations for the use of nominal capacity as a reference value for crane definition since cranes with the same nominal capacity can have capacity differences of 3 to 1 (or even bigger) when working on important radius. From this analysis, the use of MLM as crane name instead of nominal capacity is proposed since it is a much more reliable figure. Being aware of the difficulty of such change since nominal capacity is commonly used worldwide; specific actions are suggested to progress in that direction. One good example would be that manufacturers would include MLM in their official crane names which could also include the type as well. Even legal action can be taken by simply requiring to state this figure in the crane charts and characteristics of every machine. The analyzed ratio: hourly cost / MLM is really interesting since it leads to the conclusion that for all crane types, the efficiency of the hourly cost divided by capacity (given by MLM) increases when the crane capacity is higher. When crane sizes are smaller, this efficiency is lower and can fall dramatically in certain cases. The developments in the construction world regarding prefabrication and modularization mean bigger weights and dimensions, which create a demand for bigger crane capacities. On a first approach, it could be thought that crane costs could rise significantly because of this capacity hugh increase reducing in this way crane efficiency. From the results obtained here, it is clear that it is definitely not the case but the capacity increase of cranes will end up in higher efficiency levels for all crane types that have been studied.

DA TERCEIRA REVOLUÇÃO INDUSTRIAL À PRODUÇÃO ENXUTA SEU IMPACTO NA INDÚSTRIA DE AUTOPEÇAS CASO: MAHLE METAL LEVE S/A

A presente dissertação teve como objetivo verificar as razões pelas quais a empresa Metal Leve cedeu o controle acionário a uma empresa concorrente de porte internacional e comparar a situação existente à época da sua desnacionalização e o estágio em que se encontra a nova controladora Mahle Metal Leve S. A. em termos de produção e gestão, após a reorganização produtiva. Esse processo de internacionalização produtiva acarretou modificações na empresa ensejando uma reestruturação da produção e da gestão e um novo círculo vicioso, constituindo as bases de um novo crescimento econômico, com um projeto estratégico de longo prazo, associado ao seu poder econômico, a sua capacidade gerencial e a sua tradição. O estudo está fundamentado em um conjunto de informações sobre os dois momentos, focalizando os resultados financeiros, aspectos gerenciais, liderança, capacidade competitiva e a evolução ao longo desses dois momentos comparados. Concluindo que não apenas o fenômeno da globalização da economia internacional tornou inevitável a cessão do controle acionário. Porém, também faltou visão estratégica para perceber as mudanças que inevitavelmente ocorriam a sua volta e que a nova controladora, a Mahler Metal Leve, trouxe uma competência gerencial que resultou em ganhos de produtividade e melhorou sua competitividade

DA TERCEIRA REVOLUÇÃO INDUSTRIAL À PRODUÇÃO ENXUTA SEU IMPACTO NA INDÚSTRIA DE AUTOPEÇAS CASO: MAHLE METAL LEVE S/A

A presente dissertação teve como objetivo verificar as razões pelas quais a empresa Metal Leve cedeu o controle acionário a uma empresa concorrente de porte internacional e comparar a situação existente à época da sua desnacionalização e o estágio em que se encontra a nova controladora Mahle Metal Leve S. A. em termos de produção e gestão, após a reorganização produtiva. Esse processo de internacionalização produtiva acarretou modificações na empresa ensejando uma reestruturação da produção e da gestão e um novo círculo vicioso, constituindo as bases de um novo crescimento econômico, com um projeto estratégico de longo prazo, associado ao seu poder econômico, a sua capacidade gerencial e a sua tradição. O estudo está fundamentado em um conjunto de informações sobre os dois momentos, focalizando os resultados financeiros, aspectos gerenciais, liderança, capacidade competitiva e a evolução ao longo desses dois momentos comparados. Concluindo que não apenas o fenômeno da globalização da economia internacional tornou inevitável a cessão do controle acionário. Porém, também faltou visão estratégica para perceber as mudanças que inevitavelmente ocorriam a sua volta e que a nova controladora, a Mahler Metal Leve, trouxe uma competência gerencial que resultou em ganhos de produtividade e melhorou sua competitividade