Nutrient extraction and exportation by castor bean hybrid lyra

Information about nutrient extraction and exportation by crops, as well as the periods of highest nutrient demand is important for an adequate fertilization management. However, there are no studies on the nutrient uptake of short-stature hybrid castor bean. Therefore, the purpose of this study was to evaluate nutrient extraction and exportation by short-stature castor bean hybrid Lyra, in the spring-summer and fall-winter growing seasons. The experiments were conducted in the 2005/2006 spring-summer and 2006 fall-winter growing seasons on an Oxisol, in Botucatu, SP, in a randomized block design, with four replications. The plots consisted of plant samplings, which occurred 17, 31, 45, 59, 73, 97 and 120 days after emergence (DAE) in the spring-summer and 17, 31, 45, 59, 80, 100 and 120 DAE in fall-winter growing season. The growth of hybrid Lyra was slow and nutrient uptake lowest between emergence and the beginning of flowering. The period of highest dry matter (DM) accumulation rates and highest nutrient demand were observed 40 to 80 DAE, in both growing seasons. The order of nutrient extraction by the plants in the spring-summer growing season was: N>K>Ca>Mg>S>P>Fe>Mn>Zn>B>Cu>Mo. In fall-winter, S was more absorbed than Mg. Seed yield was higher in the spring-summer (2.995 kg ha-1), but nutrient extraction and exportation per ton of seed were similar in both growing seasons. Around 58 % of N and 84 % of P, and approximately half of the S and B absorbed throughout the cycle were exported with the seeds. However, most of the other nutrients accumulated in the plants returned to the soil in plant residues.

Nutrient extraction and exportation by common bean cultivars under different fertilization levels: I - macronutrients

The use of cultivars with a higher yield potential and the adoption of new technology have achieved high grain yields in common bean, which probably changed the demand for nutrients in this crop. However, there is almost no information about the periods of the cycle in which nutrients are most demanded at which quantities by the main cultivars. The objective of this study was to evaluate the macronutrient extraction and exportation by the common bean cultivars Pérola and IAC Alvorada, under different levels of NPK fertilization, on a dystroferric Red Nitosol, in Botucatu, São Paulo State, Brazil. The experiment was arranged in a randomized complete block (split plot) design with four replications. The plots consisted of six treatments based on a 2 x 3 factorial model, represented by two cultivars and three NPK levels (PD0 - 'Pérola' without fertilization, PD1 - 'Pérola' with 50 % of recommended fertilization, PD2 - 'Pérola' with 100 % of recommended fertilization, AD0 - 'IAC Alvorada' without fertilization, AD1 - 'IAC Alvorada' with 50 % of recommended fertilization, and AD2 - 'IAC Alvorada' with 100 % of recommended fertilization) and subplots sampled seven times during the cycle. At higher levels of NPK fertilization, the grain yield and macronutrient extraction and exportation of both cultivars were higher, but without statistical differences. Macronutrient absorption was higher in the treatments with 100 % of recommended NPK fertilization (average amounts per hectare: 140 kg N, 16.5 kg P, 120 kg K, 69 kg Ca, 17.9 kg Mg, and 16.3 kg S). Regardless of the treatment, the demand for N, P, K, Ca, and Mg was highest from 45 to 55 days after emergence (DAE), i.e., in the R7 stage (pod formation), while the highest S absorption rates were concentrated between 55 and 65 DAE. More than 70 % of P, between 58 and 69 % of N, 40 and 52 % of S, 40 and 48 % of K, and 35 and 45 % of Mg absorbed during the cycle was exported with grains, whereas less than 15 % of Ca was exported.

Nutrient extraction and exportation by common bean cultivars under different fertilization levels: II - micronutrients

Where the level of agricultural technology is higher, common bean cultivars with a higher yield potential possibly require greater amounts of micronutrients. In Brazil however, there is a lack of information about the micronutrient extraction and exportation by the main grown cultivars. The objective of this study was to evaluate micronutrient (B, Cu, Fe, Mn, and Zn) extraction and exportation by common bean cultivars Pérola and IAC Alvorada, under different levels of NPK fertilization, on a dystroferric Red Nitosol, in Botucatu, São Paulo State, Brazil. The experiment was arranged in a randomized complete block (split plot) design with four replications. The plots consisted of six treatments based on a 2 x 3 factorial model, represented by two cultivars and three NPK levels (PD0 - 'Pérola' without fertilization, PD1 - 'Pérola' with 50 % of recommended fertilization, PD2 - 'Pérola' with 100 % of recommended fertilization, AD0 - 'IAC Alvorada' without fertilization, AD1 - 'IAC Alvorada' with 50 % of recommended fertilization, and AD2 - 'IAC Alvorada' with 100 % of recommended fertilization) and subplots sampled seven times during the cycle. Higher levels of NPK fertilization increased micronutrient extraction by both cultivars, and treatments with 100 % of recommended NPK fertilization extracted on average 167 g B, 58 g Cu, 1,405 g Fe, 1,213 g Mn and 211 g Zn per hectare. Regardless of the treatment, the highest demand period for B, Cu, Fe, Mn and Zn in both cultivars occurred at the R7 stage (pod formation), i.e. 42 to 55 days after emergence (DAE). The amount of B, Cu, Fe, Mn and Zn exported depended mainly on the level of NPK fertilization used, with values per hectare ranging from 38 to 90 g of B, 12 to 26 g of Cu, 222 to 568 g of Fe 234 to 467 g of Mn, and 40 to 96 g of Zn.

Extraction and concentration of vapors from fire debris for forensic purposes: evaluation of the use of Radiello Passive Air Sampler

The Radiello Passive Air Sampler is one of the latest innovations developed for the sampling of pollutants in the air by passive headspace. It has been reported that its properties allow an enhanced sensitivity, reproducibility and adsorption capacity. It therefore appears to be of interest in the extraction of potential residues of ignitable liquids present in fire debris when arson is suspected. A theoretical approach and several laboratory tests have made it possible to precisely characterize in a forensic perspective the potential of the device in extracting and concentrating the vapors of ignitable liquids found in fire debris. Despite some advantages, the Radiello device appears to be less efficient than traditional axial symmetry samplers.

Production Flow Analysis - cases from manufacturing and service industry

Production flow analysis (PFA) is a well-established methodology used for transforming traditional functional layout into product-oriented layout. The method uses part routings to find natural clusters of workstations forming production cells able to complete parts and components swiftly with simplified material flow. Once implemented, the scheduling system is based on period batch control aiming to establish fixed planning, production and delivery cycles for the whole production unit. PFA is traditionally applied to job-shops with functional layouts, and after reorganization within groups lead times reduce, quality improves and motivation among personnel improves. Several papers have documented this, yet no research has studied its application to service operations management. This paper aims to show that PFA can well be applied not only to job-shop and assembly operations, but also to back-office and service processes with real cases. The cases clearly show that PFA reduces non-value adding operations, introduces flow by evening out bottlenecks and diminishes process variability, all of which contribute to efficient operations management.

Audit report on the American Recovery and Reinvestment Act (ARRA) - Program of Competitive Grants for Worker Training and Placement in High Growth and Emerging Industry Sectors program for the Iowa Green Renewable Electrical Energy Network Inc. (IGREEN) for the year ended June 30, 2012

Audit report on the American Recovery and Reinvestment Act (ARRA) - Program of Competitive Grants for Worker Training and Placement in High Growth and Emerging Industry Sectors program for the Iowa Green Renewable Electrical Energy Network Inc. (IGREEN) for the year ended June 30, 2012

Determination of the Enantiomers of Mianserin and its Metabolites in Plasma by Capillary Electrophoresis After Liquid-Liquid Extraction and On-Column Sample Preconcentration

Capillary electrophoresis has drawn considerable attention in the past few years, particularly in the field of chiral separations because of its high separation efficiency. However, its routine use in therapeutic drug monitoring is hampered by its low sensitivity due to a short optical path. We have developed a capillary zone electrophoresis (CZE) method using 2mM of hydroxypropyl-β-cyclodextrin as a chiral selector, which allows base-to-base separation of the enantiomers of mianserin (MIA), desmethylmianserin (DMIA), and 8-hydroxymianserin (OHMIA). Through the use of an on-column sample concentration step after liquid-liquid extraction from plasma and through the presence of an internal standard, the quantitation limits were found to be 5 ng/mL for each enantiomer of MIA and DMIA and 15 ng/mL for each enantiomer of OHMIA. To our knowledge, this is the first published CE method that allows its use for therapeutic monitoring of antidepressants due to its sensitivity down to the low nanogram range. The variability of the assays, as assessed by the coefficients of variation (CV) measured at two concentrations for each substance, ranged from 2 to 14% for the intraday (eight replicates) and from 5 to 14% for the interday (eight replicates) experiments. The deviations from the theoretical concentrations, which represent the accuracy of the method, were all within 12.5%. A linear response was obtained for all compounds within the range of concentrations used for the calibration curves (10-150 ng/mL for each enantiomer of MIA and DMIA and 20-300 ng/mL for each enantiomer of OHMIA). Good correlations were calculated between [(R) + (S)]-MIA and DMIA concentrations measured in plasma samples of 20 patients by a nonchiral gas chromatography method and CZE, and between the (R)- and (S)-concentrations of MIA and DMIA measured in plasma samples of 37 patients by a previously described chiral high-performance liquid chromatography method and CZE. Finally, no interference was noted from more than 20 other psychotropic drugs. Thus, this method, which is both sensitive and selective, can be routinely used for therapeutic monitoring of the enantiomers of MIA and its metabolites. It could be very useful due to the demonstrated interindividual variability of the stereoselective metabolism of MIA.

Polyethylene glycol and polyvinylpirrolidone effect on bacterial rRNA extraction and hybridization from cells exposed to tannins

In order to detect fluctuations in ruminal microbial populations due to forage tannins using 16S ribosomal RNA (rRNA) probes, recovery of intact rRNA is required. The objective of this work was to evaluate the effect of polyethylene glycol (PEG) and polyvinylpirrolidone (PVP) on extraction of bacterial rRNA, in the presence of tannins from tropical legume forages and other sources, that hybridize with oligonucleotide probes. Ruminococcus albus 8 cells were exposed to 8 g/L tannic acid or 1 g/L condensed tannins extracted from Acacia angustissima, banana (Musa sp.) skin, Desmodium ovalifolium, red grape (Vitis vinifera) skin and Inga edulis, or no tannins. Cells were rinsed with Tris buffer pH 7 containing either 8% PEG or 6% PVP prior to cell lysis. Total RNA samples rinsed with either PEG or PVP migrated through denaturing agarose gels. The 16S rRNA bands successfully hybridized with a R. albus species-specific oligonucleotide probe, regardless of tannin source. The effect of rinsing buffers on the density of 16S rRNA bands, as well as on the hybridization signals was compared. There were significant effects (P<0.01) when the controls were compared to either buffer treatments due to tannin type, buffer used and the interaction of tannin type and buffer. The significant interaction indicates the influence of tannin type on the parameters evaluated.

Threading libraries performance when applied to image acquisition and processing in a forensic application

Peer-reviewed

Embedding, Extraction and Detection of Digital Watermark in Spectral Images

Tässä diplomityössä tutkitaan tekniikoita, joillavesileima lisätään spektrikuvaan, ja menetelmiä, joilla vesileimat tunnistetaanja havaitaan spektrikuvista. PCA (Principal Component Analysis) -algoritmia käyttäen alkuperäisten kuvien spektriulottuvuutta vähennettiin. Vesileiman lisääminen spektrikuvaan suoritettiin muunnosavaruudessa. Ehdotetun mallin mukaisesti muunnosavaruuden komponentti korvattiin vesileiman ja toisen muunnosavaruuden komponentin lineaarikombinaatiolla. Lisäyksessä käytettävää parametrijoukkoa tutkittiin. Vesileimattujen kuvien laatu mitattiin ja analysoitiin. Suositukset vesileiman lisäykseen esitettiin. Useita menetelmiä käytettiin vesileimojen tunnistamiseen ja tunnistamisen tulokset analysoitiin. Vesileimojen kyky sietää erilaisia hyökkäyksiä tarkistettiin. Diplomityössä suoritettiin joukko havaitsemis-kokeita ottamalla huomioon vesileiman lisäyksessä käytetyt parametrit. ICA (Independent Component Analysis) -menetelmää pidetään yhtenä mahdollisena vaihtoehtona vesileiman havaitsemisessa.

Investments and value creation Case pulp and paper industry

Tämä tutkimus analysoi 49 sellu- ja paperiteollisuusyrityksen investointistrategioiden ja yrityksen arvon välistä yhteyttä vuosien 1996 ja 2005 välillä. Teoriaosa luo katsauksen arvonmääritysmenetelmiin ja investointien vaikutuksesta yrityksen arvoon ja arvonluontiin. Empiirinen osa on sekä kuvaileva, että selittävä. Yrityksen arvon kehittyminen mitataan vuosittain lisäarvomallilla (EVA®). Toteutetussa analyysissa yritykset on ryhmiteltyjoko liiketoimintaorientaation tai maantieteellisen alueen mukaan. Yritysten investointistrategiat jaoteltiin kasvumallin mukaisesti T&K:hon käyttöomaisuusinvestointeihin ja yritysostoihin. Kasvumallin tulokset ovat raportoitu yritystasolla. Tulokset osoittavat, että harvat sellu- ja paperiteollisuusyritykset ovetpystyneet arvonluontiin. Arvonluonti riippuu merkittävästi talouden suhdanteista. Yritysten investointistrategiat ovat olleet hyvin identtisiä tarkastelujaksonaikana ja alan suurimpien yritysten investointistrategiat kuvaavat hyvin koko toimialan kehitystä. Pienempien yritysten investointistrategiat eroavat valtavirran toimista. Jatkoanalyysi osoitti, että investoinnit käyttöomaisuuteen parantavat kannattavuutta, mitattuna EBITDA-%:lla ja yritysostot heikentävät sitä. Mitattaessa arvonluontia EVA®:lla käyttöomaisuusinvestoinneilla on positiivinen vaikutus arvonluontiin, kun taas yritysostot tuhoavat arvoa. Havainnot tukevat aikaisempia empiirisiä tutkimustuloksia.

The Boundaries of a Firm in the Pulp and Paper Industry: Complementarities of the Resource-Based View and Transaction Cost Economics

Tämän tutkimuksen tarkoituksena on tutkia sellu- ja paperiteollisuuden toimintojen luonnetta sekä miten yrityksen rajapinnat ovat muodostuneet ko. teollisuudenalalla. Tutkimus on eksploratiivinen ja luonteeltaan kvalitatiivinen. Tutkimuksen aineisto kerättiin yrityksissä tehdyillä teemahaastatteluilla. Sellu- ja paperitehtaan toimintojen analysoinnissa käytetään resurssiperusteista näkemystä ja transaktiokustannusteoriaa. Tutkimuksen yritysten rakennetta voidaan pitää varsin konservatiivisena. Teoreettinen kehys pystyi selittämään varsinaisen tuotannon järjestämistä varsin hyvin. Tukitoiminnoissa löytyi ristiriitoja teorian ja todellisuuden välillä. Tuotantotoiminnot kannattaa pitää yrityksen sisällä, koska ne täyttävät VRIN-attribuutit ja niihin liittyy korkeita transaktiokustannuksia. Suurin osa tukitoiminnoista voidaan luokitella triviaaleiksi. Joitain tukitoimintoja voidaan kuitenkin luokitella strategisesti tärkeiksi, ja voidaan päätellä, että ne pitäisi pitää yrityksen sisällä. Tässä suhteessa tulokset olivat kuitenkin ristiriitaisia, ja lisätutkimuksia tarvittaisiin lopullisten johtopäätösten tekemiseen.

The Reflections of Strategic Orientation on profitability - A resource-based study in pulp and paper industry

Tutkielman tavoitteena oli analysoida erilaisia strategisia orientaatioita sellu- ja paperiteollisuudessa. Sellu- ja paperiteollisuus on kohtaamassa strategisia haasteita, jotka ulottuvat syvälle sen rakenteisiin. Yritykset ovat valinneet erilaisia lähestymistapoja organisoidessaan tuotantoa ja kansainvälistä arvoketjuaan tässä muuttuvassa ympäristössä. Tutkimukseen valittiin 30 suurinta sellu- ja paperiteollisuudessa toimivaa yritystä ja mahdollisia syitä kannattavuuseroihin yritysten välillä analysoitiin. Yritysten strategista orientaatiota tarkasteltiin vertailemalla muun muassa seuraavia tekijöitä: vertikaalinen integraatioaste, tuotevalikoiman laajuus, tuotantokapasiteetin levinneisyys ja tuotantokapasiteetin ikä. Kannattavuutta mitattiin erilaisilla talouden tunnusluvuilla (liikevoitto, oman pääoman tuotto-%, koko pääoman tuotto-%). Tulosten mukaan yrityksiä voidaan ryhmitellä strategisen orientaation perusteella ja ryhmien välillä on kannattavuuseroja.