Banana peel: an effective biosorbent for aflatoxins

This work reports the application of banana peel as a novel bioadsorbent for in vitro removal of five mycotoxins (aflatoxins (AFB1, AFB2, AFG1, AFG2) and ochratoxin A). The effect of operational parameters including initial pH, adsorbent dose, contact time and temperature were studied in batch adsorption experiments. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pHpzc) analysis were used to characterise the adsorbent material. Aflatoxins’ adsorption equilibrium was achieved in 15 min, with highest adsorption at alkaline pH (6–8), while ochratoxin has not shown any significant adsorption due to surface charge repulsion. The experimental equilibrium data were tested by Langmuir, Freundlich and Hill isotherms. The Langmuir isotherm was found to be the best fitted model for aflatoxins, and the maximum monolayer coverage (Q0) was determined to be 8.4, 9.5, 0.4 and 1.1 ng mg−1 for AFB1, AFB2, AFG1 and AFG2 respectively. Thermodynamic parameters including changes in free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the four aflatoxins. Free energy change and enthalpy change demonstrated that the adsorption process was exothermic and spontaneous. Adsorption and desorption study at different pH further demonstrated that the sorption of toxins was strong enough to sustain pH changes that would be experienced in the gastrointestinal tract. This study suggests that biosorption of aflatoxins by dried banana peel may be an effective low-cost decontamination method for incorporation in animal feed diets. © 2016 Informa UK Limited, trading as Taylor & Francis Group.

Avaliação da hidrólise alcalina da quitina e elaboração de filmes de quitosana para aplicação na adsorção do corante têxtil reativo preto 5

Nesta pesquisa, diferentes amostras de quitosana foram produzidas por diferentes condições de hidrólise alcalina da quitina. A partir das amostras de quitosana foram produzidos filmes,sendo estes aplicados na adsorção do corante têxtil reativo preto 5 e os resultados foram comparados com os dos seus respectivos pós. Os valores das massas molares da quitosana aumentaram em função do aumento do diâmetro da quitina e diminuíram com o aumento da relação de solução NaOH:quitina, da concentração de NaOH e tempo de reação, e ficaram na faixa de 100 a 200 kDa. Um comportamento inverso foi observado para o grau de desacetilação da quitosana, e seus valores variaram de 65 a 95%. Quanto aos filmes biopoliméricos elaborados, os que apresentaram melhores valores quanto as suas propriedades mecânicas e de permeabilidade ao vapor de água foram os filmes produzidos com quitosana de mais elevada massa molar e menor grau de desacetilação. A fim de avaliar o comportamento dos filmes em processos de adsorção, estes foram aplicados na remoção do corante reativo preto 5 (RB5) em diferentes condições de pH (4, 6 e 8). Após, foram escolhidos quatro filmes de quitosana (FQ), com diferentes graus de desacetilação e massas molares, que foram comparados com as quitosanas na forma de pó (PQ) no estudo de adsorção. Este foi realizado sob diversas condições experimentais (pH, temperatura e taxa de agitação) através das isotermas de equilíbrio, da termodinâmica e da cinética. Análises de interação e ciclos de adsorção-dessorção também foram realizados. Verificou-se que PQ e FQ com grau de desacetilação de 95% e massa molar de 100 kDa foram os adsorvente mais adequados, apresentando mais de 99% de remoção do corante RB5 em pH 4,0. Para ambos, PQ e FQ, o modelo de Langmuir foi o mais adequado para representar os dados de equilíbrio. As capacidades máximas de adsorção foram 654,3 e 589,5 mg g-1 para PQ e FQ, respectivamente, obtidos a 298 K. O processo de adsorção foi espontâneo, favorável e exotérmico. A adsorção de RB5 para PQ e FQ seguiu o modelo cinético de Elovich,e ocorreram interações eletrostáticas do PQ-RB5 e do FQ-RB5. Os filmes de quitosana foram reutilizados três vezes, enquanto que a quitosana em pó não pode ser reutilizada.

Adsorção de cromo (VI) em leito fixo utilizando partículas de areia recobertas com Quitosana

Neste trabalho foi avaliado o processo de recobrimento de partículas de areia com quitosana utilizando a técnica dip-coating, e analisado o emprego destas partículas como recheio de uma coluna de leito fixo no processo de adsorção de cromo (VI) em solução aquosa. A quitosana foi obtida a partir de resíduos de camarão e caracterizada. O estudo avaliou a influência do tamanho das partículas e da concentração da solução de quitosana no recobrimento das partículas de areia. Foram avaliados parâmetros termodinâmicos, isotermas de equilíbrio e parâmetros relacionados ao funcionamento do leito (vazão e pH da solução, diâmetro de partícula) para o processo de adsorção de cromo (VI) em solução aquosa. No recobrimento das partículas de areia, o tamanho não teve significância na resposta, enquanto a concentração da solução de recobrimento mostrou ter grande influência sobre o resultado, sendo que a menor concentração de quitosana dentro da faixa estudada (0,5% p/v) apresentou o melhor desempenho. O processo de cura física para o recobrimento das partículas de areia mostrou melhor desempenho para a adsorção de cromo (VI) em leito fixo frente ao processo físico-químico. As análises de superfície (MEV) e de difração de raio-X (EDX) comprovaram a mudança na superfície das partículas recobertas e a presença de cromo após a adsorção. O modelo de Sips foi o que melhor representou os dados experimentais de equilíbrio, com R2 >0,99% e EMR<3,5%, sendo que a capacidade máxima de adsorção foi de 46,93 mg g-1 obtida a 298 K. O processo se mostrou espontâneo, exotérmico e favorável, com valores de -4,49 a -4,66kJ mol-1 para e energia livre de Gibbs, -5,97kJ mol-1 para a variação de entalpia e -5,17x10-3 kJ mol-1K -1 para variação de entropia. O aumento do pH diminuiu a adsorção de cromo (VI), sendo que a melhor resposta foi obtida em pH 3, sendo que o diâmetro de partícula não teve efeito significante. O estudo da vazão da solução de cromo (VI) no desempenho do leito mostrou que no menor valor (2,5 mL min-1 ) a concentração de saída do leito foi próxima a zero, mantendo-se com concentrações de saída abaixo de 20% por pelo menos 20 min. O estudo da dessorção do leito mostrou que após cinco ciclos de trabalho o leito manteve 86% da capacidade de adsorção, com taxas de recuperação do cromo no processo de dessorção maiores que 95%.

Removal of BrO3 − from drinking water samples using newly developed agricultural waste-based activated carbon and its determination by ultra-performance liquid chromatography-mass spectrometry

Activated carbon was prepared from date pits via chemical activation with H3PO4. The effects of activating agent concentration and activation temperature on the yield and surface area were studied. The optimal activated carbon was prepared at 450 °C using 55 % H3PO4. The prepared activated carbon was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric-differential thermal analysis, and Brunauer, Emmett, and Teller (BET) surface area. The prepared date pit-based activated carbon (DAC) was used for the removal of bromate (BrO3 −). The concentration of BrO3 − was determined by ultra-performance liquid chromatography-mass tandem spectrometry (UPLC-MS/MS). The experimental equilibrium data for BrO3 − adsorption onto DAC was well fitted to the Langmuir isotherm model and showed maximum monolayer adsorption capacity of 25.64 mg g−1. The adsorption kinetics of BrO3 − adsorption was very well represented by the pseudo-first-order equation. The analytical application of DAC for the analysis of real water samples was studied with very promising results.

How Prescribed Policy Can Mislead when Data Are Defective: a Follow-Up to Srinivasan (1994) Using General Equilibrium.

We highlight an example of considerable bias in officially published input-output data (factor-income shares) by an LDC (Turkey), which many researchers use without question. We make use of an intertemporal general equilibrium model of trade and production to evaluate the dynamic gains for Turkey from currently debated trade policy options and compare the predictions using conservatively adjusted, rather than official, data on factor shares.

Multiproperty correlation of experimental data of the binaries propyl ethanoate+alkanes (pentane to decane). New experimental information for vapor-liquid equilibrium and mixing properties

[EN]A thermodynamic study is carried out on binary systems composed of propyl ethanoate with six alkanes, from pentane to decane. Vapor pressures of the ester and the isobaric vapor−liquid equilibria of these six mixtures were measured at 101.32 kPa in a small-capacity ebulliometer and also the mixing properties yE = vE,hE over a range of temperatures and at atmospheric pressure. Adequate correlations are drawn for the surfaces yE = yE(x,T) with an interpretation on the behavior of the mixtures and also using cp E data from literature.

An annotated bibliography of compiled thermodynamic data sources for biochemical and aqueous systems (1930 to 1975) : equilibrium, enthalpy, heat capacity, and entropy data /

101 selected references to books and journal articles. Also includes some foreign-language titles. Alphabetical arrangement by primary authors. Each entry gives bibliographical information and annotation. Author, subject indexes.

Formalin fixation affects equilibrium partitioning of an ionic contrast agent-microcomputed tomography (EPIC-[mu]CT) imaging of osteochondral samples

Equilibrium Partitioning of an Ionic Contrast agent with microcomputed tomography (EPIC-[mu]CT) is a non-invasive technique to quantify and visualize the three-dimensional distribution of glycosaminoglycans (GAGs) in fresh cartilage tissue. However, it is unclear whether this technique is applicable to already fixed tissues. Therefore, this study aimed at investigating whether formalin fixation of bovine cartilage affects X-ray attenuation, and thus the interpretation of EPIC-[mu]CT data.Design Osteochondral samples (n = 24) were incubated with ioxaglate, an ionic contrast agent, for 22 h prior to [mu]CT scanning. The samples were scanned in both formalin-fixed and fresh conditions. GAG content was measured using a biochemical assay and normalized to wet weight, dry weight, and water content to determine potential reasons for differences in X-ray attenuation.Results The expected zonal distribution of contrast agent/GAGs was observed for both fixed and fresh cartilage specimens. However, despite no significant differences in GAG concentrations or physical properties between fixed and fresh samples, the average attenuation levels of formalin-fixed cartilage were 14.3% lower than in fresh samples.Conclusions EPIC-[mu]CT is useful for three-dimensional visualization of GAGs in formalin-fixed cartilage. However, a significant reduction in X-ray attenuation for fixed (compared to fresh) cartilage must be taken into account and adjusted for accordingly when quantifying GAG concentrations using EPIC-[mu]CT.

Supply, demand, and equilibrium in the market for CRNAs

This study determined the current trends in supply, demand, and equilibrium (ie, the level of employment where supply equals demand) in the market for Certified Registered Nurse Anesthetists (CRNAs). It also forecasts future needs for CRNAs given different possible scenarios. The impact of the current availability of CRNAs, projected retirements, and changes in the demand for surgeries are considered in relation to CRNAs needed for the future. The study used data from many sources to estimate models associated with the supply and demand for CRNAs and the relationship to relevant community and policy characteristics such as per capita income of the community and managed care. These models were used to forecast changes in surgeries and in the supply of CRNAs in the future. The supply of CRNAs has increased in recent years, stimulated by shortages of CRNAs and subsequent increases in the number of CRNAs trained. However, the increases have not offset the number of retiring CRNAs to maintain a constant age in the CRNA population. The average age will continue to increase for CRNAs in the near future despite increases in CRNAs trained. The supply of CRNAs in relation to surgeries will increase in the near future.

Parameters and equilibrium profiles for large-area surface-wave sustained plasmas

The equilibrium profiles of the plasma parameters of large-area if discharges in a finite-length metal-shielded dielectric cylinder are computed using a two-dimensional fluid code. The rf power is coupled to the plasma through edge-localized surface waves traveling in the azimuthal direction along the plasma edge. It is shown that self-consistent accounting for axial plasma diffusion and radial nonuniformity of the electron temperature can explain the frequently reported deviations of experimentally measured radial density profiles from that of the conventional linear diffusion models. The simulation results are in a good agreement with existing experimental data obtained from surface-wave sustained large-diameter plasmas. © 2002 The American Physical Society.

Equilibrium and column studies of iron exchange with strong acid cation resin

The exchange of iron species from iron (III) chloride solutions with a strong acid cation resin has been investigated in relation to a variety of water and wastewater applications. A detailed equilibrium isotherm analysis was conducted wherein models such as Langmuir Vageler, Competitive Langmuir, Freundlich, Temkin, Dubinin Astakhov, Sips and Brouers-Sotolongo were applied to the experimental data. An important conclusion was that both the bottle-point method and solution normality used to generate the ion exchange equilibrium information influenced which sorption model fitted the isotherm profiles optimally. Invariably, the calculated value for the maximum loading of iron on strong acid cation resin was substantially higher than the value of 47.1 g/kg of resin which would occur if one Fe3+ ion exchanged for three “H+” sites on the resin surface. Consequently, it was suggested that above pH 1, various iron complexes sorbed to the resin in a manner which required less than 3 sites per iron moiety. Column trials suggested that the iron loading was 86.6 g/kg of resin when 1342 mg/L Fe (III) ions in water were flowed at 31.7 bed volumes per hour. Regeneration with 5 to 10 % HCl solutions reclaimed approximately 90 % of exchange sites.

Revision of JANAF (1985) data for C2H2(g)

There is an error in the JANAF (1985) data on the standard enthalpy, Gibbs energy and equilibrium constant for the formation of C2H2 (g) from elements. The error has arisen on account of an incorrect expression used for computing these parameters from the heat capacity, entropy and the relative heat content. Presented in this paper are the corrected values of the enthalpy, the Gibbs energy of formation and the corresponding equilibrium constant.