The potential of RIVPACS for predicting the effects of environmental change

RIVPACS has been used successfully for biological assessment of river water quality but its potential in forecasting the effects of environmental change has not been investigated. This study has shown that it is possible to simulate faunal changes in response to environmental disturbance, provided that the disturbance directly involves the environmental variables used in RIVPACS predictions. These variables relate to channel shape, discharge and substratum. Many impacts, particularly those associated with pollution, will not affect these variables and therefore RIVPACS cannot simulate the effects of pollution. RIVPACS was sensitive only to major changes in substratum. It was concluded that, because of the static nature of RIVPACS, it cannot respond to the dynamic effects and processes associated with environmental disturbance. Thus RIVPACS, while showing direction of change and indicating sensitive taxa, cannot be used to predict or forecast the effects of environmental impacts.

Blue frontiers: managing the environmental costs of aquaculture

The report begins with an overview of the current status of world aquaculture. It then goes on to describe an approach for estimating the current combined biophysical resource demands of aquaculture for producer countries and regions. Following a comparison of these results with those available for other animal food production sectors the report then examines the consequences of likely future trends in production on the environmental impacts of aquaculture. Finally, the policy implications of the report’s findings are discussed along with the research agenda that should be pursued to meet the challenge of sustainable food production.

Exploratory analysis of resource demand and the environmental footprint of future aquaculture development using Life Cycle Assessment

Increases in fish demand in the coming decades are projected to be largely met by growth of aquaculture. However, increased aquaculture production is linked to higher demand for natural resources and energy as well as emissions to the environment. This paper explores the use of Life Cycle Assessment to improve knowledge of potential environmental impacts of future aquaculture growth. Different scenarios of future aquaculture development are taken into account in calculating the life cycle environmental impacts. The environmental impact assessments were built on Food and Agriculture Organization statistics in terms of production volume of different species, whereas the inputs and outputs associated with aquaculture production systems were sourced from the literature. The matrix of input-output databases was established through the Blue Frontiers study.

Embodied energy as an environmental impact indicator for basement wall construction

Attempts were made to quantify the environmental impacts of the basement walls of two commercial buildings in London. Four different retaining wall options were designed based on steel and concrete systems for each of the sites. It was considered that excavation would take place with the aid of a one or two anchors system. Evaluation of embodied energy (EE) and CO2 emissions for each of the wall designs and anchoring systems were compared. Results show that there are notable differences in EE between different wall designs. Using the averaged set of Embodied Energy Intensity (EEI) values, the use of recycled steel over virgin steel would reduce the EE of the wall significantly. The difference in anchor designs is relatively insignificant, and therefore the practicality of the design for the specific site should be the deciding factor for anchor types. Generally, the scale of environmental impacts due to constructions is large compared to other aspects in life as demonstrated with the comparisons to car emissions and household energy consumption. Copyright ASCE 2008.

Environmental policy and technological change

The relationship between technological change and environmental policy has received increasing attention from scholars and policy makers alike over the past ten years. This is partly because the environmental impacts of social activity are significantly affected by technological change, and partly because environmental policy interventions themselves create new constraints and incentives that affect the process of technological developments. Our central purpose in this article is to provide environmental economists with a useful guide to research on technological change and the analytical tools that can be used to explore further the interaction between technology and the environment. In Part 1 of the article, we provide an overview of analytical frameworks for investigating the economics of technological change, highlighting key issues for the researcher. In Part 2, we turn our attention to theoretical analysis of the effects of environmental policy on technological change, and in Part 3, we focus on issues related to the empirical analysis of technology innovation and diffusion. Finally, we conclude in Part 4 with some additional suggestions for research.

Use of Continuous Plankton Recorder information in support of marine management: applications in fisheries, environmental protection, and in the study of ecosystem response to environmental change

The Continuous Plankton Recorder (CPR) survey was conceived from the outset as a programme of applied research designed to assist the fishing industry. Its survival and continuing vigour after 70 years is a testament to its utility, which has been achieved in spite of great changes in our understanding of the marine environment and in our concerns over how to manage it. The CPR has been superseded in several respects by other technologies, such as acoustics and remote sensing, but it continues to provide unrivalled seasonal and geographic information about a wide range of zooplankton and phytoplankton taxa. The value of this coverage increases with time and provides the basis for placing recent observations into the context of long-term, large-scale variability and thus suggesting what the causes are likely to be. Information from the CPR is used extensively in judging environmental impacts and producing quality status reports (QSR); it has shown the distributions of fish stocks, which had not previously been exploited; it has pointed to the extent of ungrazed phytoplankton production in the North Atlantic, which was a vital element in establishing the importance of carbon sequestration by phytoplankton. The CPR continues to be the principal source of large-scale, long-term information about the plankton ecosystem of the North Atlantic. It has recently provided extensive information about the biodiversity of the plankton and about the distribution of introduced species. It serves as a valuable example for the design of future monitoring of the marine environment and it has been essential to the design and implementation of most North Atlantic plankton research.

Detection and impacts of leakage from sub-seafloor deep geological carbon dioxide storage

Fossil fuel power generation and other industrial emissions of carbon dioxide are a threat to global climate1, yet many economies will remain reliant on these technologies for several decades2. Carbon dioxide capture and storage (CCS) in deep geological formations provides an effective option to remove these emissions from the climate system3. In many regions storage reservoirs are located offshore4, 5, over a kilometre or more below societally important shelf seas6. Therefore, concerns about the possibility of leakage7, 8 and potential environmental impacts, along with economics, have contributed to delaying development of operational CCS. Here we investigate the detectability and environmental impact of leakage from a controlled sub-seabed release of CO2. We show that the biological impact and footprint of this small leak analogue (<1 tonne CO2 d−1) is confined to a few tens of metres. Migration of CO2 through the shallow seabed is influenced by near-surface sediment structure, and by dissolution and re-precipitation of calcium carbonate naturally present in sediments. Results reported here advance the understanding of environmental sensitivity to leakage and identify appropriate monitoring strategies for full-scale carbon storage operations.

Detection and impacts of leakage from sub-seafloor deep geological carbon dioxide storage

Fossil fuel power generation and other industrial emissions of carbon dioxide are a threat to global climate1, yet many economies will remain reliant on these technologies for several decades2. Carbon dioxide capture and storage (CCS) in deep geological formations provides an effective option to remove these emissions from the climate system3. In many regions storage reservoirs are located offshore4, 5, over a kilometre or more below societally important shelf seas6. Therefore, concerns about the possibility of leakage7, 8 and potential environmental impacts, along with economics, have contributed to delaying development of operational CCS. Here we investigate the detectability and environmental impact of leakage from a controlled sub-seabed release of CO2. We show that the biological impact and footprint of this small leak analogue (<1 tonne CO2 d−1) is confined to a few tens of metres. Migration of CO2 through the shallow seabed is influenced by near-surface sediment structure, and by dissolution and re-precipitation of calcium carbonate naturally present in sediments. Results reported here advance the understanding of environmental sensitivity to leakage and identify appropriate monitoring strategies for full-scale carbon storage operations.

Numerical assessment of potential impacts of hydraulically fractured Bowland Shale on overlying aquifers

Natural gas extracted from hydraulically fractured shale formations potentially has a big impact on the global energy landscape. However, there are concerns of potential environmental impacts of hydraulic fracturing of the shale formations, particularly those related to water quality. To evaluate the potential impact of hydraulically fractured shale on overlying aquifers, we conduct realizations of numerical modeling simulations to assess fluid flow and chloride transport from a synthetic Bowland Shale over a period of 11,000 years. The synthetic fractured shale was represented by a three-dimensional discrete fracture model that was developed by using the data from a Bowland Shale gas exploration in Lancashire, UK. Chloride mass exchange between fractures and the rock matrix was fully accounted for in the model. The assessment was carried out to investigate fluid and chloride mass fluxes before, during, and after hydraulic fracturing of the Bowland Shale. Impacts of the upward fracture height and aperture, as well as hydraulic conductivity of the multilayered bedrock system, are also included this assessment. This modeling revealed that the hydraulically fractured Bowland Shale is unlikely to pose a risk to its overlying groundwater quality when the induced fracture aperture is ≤200 µm. With the fracture aperture ≥1000 µm, the upward chloride flux becomes very sensitive to the upward fracture height growth and hydraulic conductivity of the multilayered bedrock system. In the extremely unlikely event of the upward fracture growth directly connecting the shale formation to the overlying Sherwood Sandstone aquifer with the fracture aperture ≥1000 µm, the upward chloride mass flux could potentially pose risks to the overlying aquifer in 100 years. The model study also revealed that the upward mass flux is significantly intercepted by the horizontal mass flux within a high permeable layer between the Bowland Shale and its overlying aquifers, reducing further upward flux toward the overlying aquifers.

Non-convex dynamic economic/environmental dispatch with plug-in electric vehicle loads

Electric vehicles are a key prospect for future transportation. A large penetration of electric vehicles has the potential to reduce the global fossil fuel consumption and hence the greenhouse gas emissions and air pollution. However, the additional stochastic loads imposed by plug-in electric vehicles will possibly introduce significant changes to existing load profiles. In his paper, electric vehicles loads are integrated into an 5-unit system using a non-convex dynamic dispatch model. The actual infrastructure characteristics including valve-point effects, load balance constrains and transmission loss have been included in the model. Multiple load profiles are comparatively studied and compared in terms of economic and environmental impacts in order o identify patterns to charge properly. The study as expected shows ha off-peak charging is the best scenario with respect to using less fuels and producing less emissions.

GIS on tourism planning: preventing the impacts caused by the developing tourism activity in a specific site

The environment is one of the greatest concerns of humankind. Nowadays, the activities which improve or destroy it must be assessed and controlled by efficient means which should permit the control of environmental impact caused by the development of these activities. This document presents an information system implementation, as a Decision Support system, allowing the Decision Maker to evaluate, foresee and control the future environmental impact of Tourism through consultation, the management and the presentation of decision schemes based on defined measures of a regional tourism planning.

Trawling and creeling for nephrops: impacts on biodiversity and populations structure

Dissertação de mestrado, Aquacultura e Pescas, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Environmental indicator frameworks to design and assess environmental monitoring programs

Impact Assessment and Project Appraisal, vol. 22, n.1, March 2004, p. 47–62

Corporate Social Responsibility in the Oil and Gas Industry: Environmental Management Systems as a Source of Sustainable Development

The environmental aspect of corporate social responsibility (CSR) expressed through the process of the EMS implementation in the oil and gas companies is identified as the main subject of this research. In the theoretical part, the basic attention is paid to justification of a link between CSR and environmental management. The achievement of sustainable competitive advantage as a result of environmental capital growth and inclusion of the socially responsible activities in the corporate strategy is another issue that is of special significance here. Besides, two basic forms of environmental management systems (environmental decision support systems and environmental information management systems) are explored and their role in effective stakeholder interaction is tackled. The most crucial benefits of EMS are also analyzed to underline its importance as a source of sustainable development. Further research is based on the survey of 51 sampled oil and gas companies (both publicly owned and state owned ones) originated from different countries all over the world and providing reports on sustainability issues in the open access. To analyze their approach to sustainable development, a specifically designed evaluation matrix with 37 indicators developed in accordance with the General Reporting Initiative (GRI) guidelines for non-financial reporting was prepared. Additionally, the quality of environmental information disclosure was measured on the basis of a quality – quantity matrix. According to results of research, oil and gas companies prefer implementing reactive measures to the costly and knowledge-intensive proactive techniques for elimination of the negative environmental impacts. Besides, it was identified that the environmental performance disclosure is mostly rather limited, so that the quality of non-financial reporting can be judged as quite insufficient. In spite of the fact that most of the oil and gas companies in the sample claim the EMS to be embedded currently in their structure, they often do not provide any details for the process of their implementation. As a potential for the further development of EMS, author mentions possible integration of their different forms in a single entity, extension of existing structure on the basis of consolidation of the structural and strategic precautions as well as development of a unified certification standard instead of several ones that exist today in order to enhance control on the EMS implementation.

Étude exploratoire de la phase d’usage des produits électroniques en vue de minimiser les impacts environnementaux : le cas du téléviseur

À cause de leur impact environnemental élevé, les déchets d’équipements électriques et électroniques (DEEE) sont un problème majeur pour les pays développés. La consommation importante de produits électroniques, dont la durée d’utilisation est de plus en plus courte, a entrainé une production croissante de DEEE. C’est dans ce contexte que l’Union européenne a instauré en 2003 la responsabilité élargie des producteurs (REP). Cet outil de politique environnementale a rendu légalement responsables les fabricants de la mise en oeuvre et du financement d’un programme d’intendance des DEEE. Alors que la REP vise principalement le traitement écologique des DEEE, cet instrument ne permet pas de réduire les quantités considérables qui sont produites par les consommateurs. Cette situation est d’autant plus inquiétante que les gains environnementaux obtenus, grâce à l’implantation de la REP, ont été annulés au regard de l’augmentation continue de la consommation de biens électroniques à l’échelle mondiale. En réponse à cette problématique, la présente thèse porte sur les pratiques de l’usager au cours de la phase de consommation des appareils électroniques (aussi appelée phase d’usage). Cette étape du cycle de vie regroupe l’achat, l’utilisation, la réparation et la mise au rebut des biens. Une approche qualitative de type exploratoire faisant appel à l’étude de cas a été utilisée. Le téléviseur, retenu comme cas d’étude, illustre des enjeux partagés par plusieurs équipements électroniques, tels que : la fréquente mise sur le marché de nouveaux modèles, le bas prix d’acquisition comparé au coût de la réparation et l’influence de la mode sur les choix effectués par le consommateur. Ces facteurs facilitent le remplacement des biens et, par conséquent, pourraient entrainer leur fin de vie prématurée qui se matérialise à travers différentes formes d’obsolescence. Dans le cadre de cette étude de cas, une trentaine d’entrevues semi-dirigées a été réalisée avec des usagers et réparateurs de produits électroniques en vue de documenter les différentes sous-étapes de la phase d’usage d’un téléviseur. Sur la base des informations recueillies, l’objectif de cette thèse est de formuler des recommandations, à destination des autorités politiques, qui pourront permettre une minimisation des impacts environnementaux liés à la phase d’usage des appareils électroniques. Les résultats ont permis de mettre en évidence, via le rôle et le statut singulier occupé par le téléviseur dans les foyers, les comportements de l’usager contribuant à augmenter l’empreinte écologique associée à la phase d’usage. L’acquisition de nombreux biens électroniques et non électroniques suite à l’achat du téléviseur, ses multiples fonctionnalités le rapprochant de celles de l’ordinateur et des tablettes, ainsi que la fin de vie prématurée de produits fonctionnels, mais obsolètes d’un point de vue technologique, font partie des résultats de cette recherche. En lien avec ces constats, cette étude propose des instruments de politique environnementale, dont l’affichage de la durée de vie des équipements électroniques, destinés à aider le consommateur à réaliser des choix plus éclairés au moment de l’achat. D’autres orientations, telles que la possibilité d’évoluer vers une réglementation horizontale, c’est-à-dire un cadre législatif qui ne se basera plus sur le produit individuel, mais sur l’ensemble des appareils ayant des fonctionnalités similaires, sont exposées. Par ailleurs, cette recherche explore certains leviers pouvant minimiser le phénomène de fin de vie prématurée des appareils électroniques, tels que l’envoi de biens obsolètes et fonctionnels des pays développés vers ceux en développement pour permettre leur réutilisation et la tendance du Do-It- Yourself dans la réparation des produits électroniques.