New hydrazine sensors based on electropolymerized meso-tetra (4-sulphonatephenyl)porphyrinate manganese (III)/silver nanomaterial

A new electrocatalytic active porphyrin nanocomposite material was obtained by electropolymerization of meso-tetra(4-sulphonatephenyl) porphyrinate manganese(III) complex (MnTPPS) in alkaline solutions containing sub-micromolar concentrations of silver chloride. The modified glassy carbon electrodes efficiently oxidize hydrazine at 10 mV versus Ag/AgCl, dramatically decreasing the overpotential of conventional carbon electrodes. The analytical characteristics of this amperometric sensor coupled with batch injection analysis (BIA) technique were explored. Wide linear dynamic range (2.5 x 10(-7) to 2.5 x 10(-4) mol L-1), good repeatability (R.S.D. = 0.84%, n = 30) and low detection (3.1 x 10(-8) mol L-1) and quantification (1.0 x 10(-7) mol L-1) limits, as well as very fast sampling frequency (60 determinations per hour) were achieved. (c) 2007 Elsevier B.V. All rights reserved.

Liming and Manganese Foliar Levels in Orange

Citrus cultures have a fundamental importance to the Brazilian economy; certain aspects such as plant nutrition, yield, and fruit quality are vital for the citrus industry sustainability. The present study evaluated the nutritional status of manganese in adult Pear orange trees using different lime rates topically applied to the soil. The direct evaluation of lime rates effects on leaf manganese (Mn) levels revealed a decrease of the nutrient correlated to its increased, as well as passage of time between application and measurement. Foliar sampling 30 months after surface lime application evidenced a high correlation of foliar manganese levels with soil base saturation of 10-20 cm. Leaf manganese levels which showed a great probability of high productivity were between 33 and 70 mg kg-1.

Egg quality during storage and deposition of minerals in eggs from quails fed diets supplemented with organic selenium, zinc and manganese

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potential and costs for the production of electrolytic hydrogen in alcohol and sugar cane plants in the central and south regions of Brazil

This project verified the potential for the production of hydrogen via water electrolysis by using the exceeding electrical energy resultant from alcohol and sugar plants that use sugar cane bagasse as fuel. The studies were carried out in cogeneration plants authorized by the Electrical Energy National Agency (ANEEL). The processing history of sugar cane considered was based on the 2006/2007 harvests. The total bagasse produced, electrical energy generated and exceeding electrical energy in a year were calculated. It was obtained an average energy consumption value of 5.2 kWh Nm(-3) and the hydrogen production costs regarding the amount of sugar cane processed that ranged from US$ 0.50 to US$ 0.75 Nm(-3). The results pointed that the costs for the production of hydrogen via the bagasse exceeding energy are close to the production costs that use other sources of energy. As the energy generated from the bagasse is a renewable one, this alternative for the production of hydrogen is economical and environmentally viable. (C) 2008 International Association for Hydrogen Energy. Published by Elsevier Ltd. All rights reserved.

Application of the Potentiometric Stripping Analysis with Constant Current for the Determination of Lithium Ions Using a Spinel-Type Manganese (IV) Oxide-Modified Carbon Paste Electrode

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Voltammetric performance and application of a sensor for sodium ions constructed with layered birnessite-type manganese oxide

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

An Electrochemical Sensor Based on Nanostructured Hollandite-type Manganese Oxide for Detection of Potassium Ions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A novel Mn-containing conducting metallopolymer obtained by electropolymerization in aqueous solution of a tetranuclear oxo-bridged manganese complex

The [Mn(4)(IV)O(5)(terpy)(4)(H(2)O)(2)](6+) complex shows great potential for electrode modification by electropolymerization using cyclic voltammetry. The electropolymerization mechanism was based on the electron transfer between dx(2)-y(2) orbitals of the metallic center and p pi orbital of the ligand.

Electrochemical evaluation of the a carbon-paste electrode modified with spinel manganese(IV) oxide under flow conditions for amperometric determination of lithium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrolytic Balance in Broiler Chicks During the First Week of Age

Foram conduzidos dois experimentos, utilizando-se 712 pintos de corte para avaliar o efeito do balanço eletrolítico (Na+K-Cl) em rações pré-iniciais (1-7 dias) de frangos de corte. As rações à base de milho e farelo de soja, com 21,5 % de proteína e 2.900 kcal EM/kg, foram oferecidas à vontade. No experimento I, o nível de K foi fixado e os níveis de Na e Cl foram manipulados, em 4 tratamentos com 8 repetições de 16 aves cada. No experimento II, níveis mais elevados de Na e K foram usados, com 4 tratamentos e 5 repetições de 10 aves cada. em ambos os experimentos, os balanços eletrolíticos foram de 40; 140; 240 e 340 mEq/kg de ração. O balanço eletrolítico causou um efeito quadrático no ganho de peso e na conversão alimentar e um aumento linear no consumo de alimento quando o balanço eletrolítico foi aumentado pela suplementação de Na, indicando que esse íon estimula o consumo de alimento das aves nesse período. Porém, o consumo de alimento foi máximo em 202 mEq/kg, quando os níveis de K e Na foram simultaneamente aumentados na dieta, indicando que o limite superior de consumo de alimento é deprimido em função do K em excesso. O balanço eletrolítico ideal foi entre 246 e 277 mEq/kg obtidos pela manipulação dos níveis de Na e Cl.

Evaluation of Hemodynamic, Metabolic, and Electrolytic Changes After Graft Reperfusion in a Porcine Model of Intestinal Transplantation

Background. We sought to establish an anesthetic protocol to evaluate the hemodynamic, metabolic, and electrolytic changes after graft reperfusion in pigs undergoing orthotopic intestinal transplant (ITX).Methods. Fifteen pigs were distributed into two groups: GI (n = 6), without immunosuppression, and GII (n = 9), immunosuppressed before surgery with tacrolimus (0.3 mg/kg). The animals were premedicated at 1 hour before surgery with IM acepromazine (0.1 mg/kg), morphine (0.4 mg/kg), ketamine (10 mg/kg), and atropine (0.044 mg/kg IM). Anesthesia induction used equal proportions of diazepam and ketamine (0.1-0.15 mL/kg/IV) and for maintenance in IV infusion of xylazine (1 mg/mL), ketamine (2 mg/mL), and guaiacol glyceryl ether 5% (50 mg/mL), diluted in 250 mL of 5% glucose solution. In addition, recipient pigs were treated with isofluorane inhalation. Heart rate (HR), systolic (SAP), mean (MAP), and diastolic (DAP) arterial pressure, pulse oximetry, respiratory frequency (f), capnography, body temperature (T), blood gas analysis (pH, PaCO(2), PaO(2), base excess, BE; HCO(3)(-), SatO(2)), serum potassium (K), calcium (Ca), sodium, hematocrit (Hct), and glucose (Glu) were measured at four times; MO: after incision (basal value); M1: 10 minutes before reperfusion; and M2 and M3: 10 and 20 minutes after graft reperfusion.Results. All groups behaved in a similar pattern. There was significant hypotension after graft reperfusion in GI and GII (M2 = 56.2 +/- 6.4 and M3 = 57.2 +/- 8.3 mm Hg and M2 = 65.7 +/- 10.2 and M3 = 67.8 +/- 16.8 mm Hg, respectively), accompanied by elevated HR. The ETCO(2) was elevated at M2 (42 mm Hg) and M3 (40 mm Hg). Metabolic acidosis was observed after reperfusion, with significant increase in K levels.Conclusion. The anesthetic protocol for donors and recipients was safe to perform the procedure, allowing control of hemodynamic and metabolic changes after reperfusion without differences regarding immunosuppression.

Effect of electrolytic and chemical lesion by ibotenic acid of the septal area on water and salt intake

Water and sodium chloride intake was studied in male Holtzman rats weighing 250-300 g that had been subjected to electrolytic and chemical lesions of the septal area (SA). Water intake increased in animals with electrolytic lesion of the SA bilaterally from 169.37 +/- 8.55 (sham) to 214.87 +/- 23.10 ml/5 days (lesioned). Water intake decreased after ibotenic acid lesion of the SA from 229.33 +/- 27.60 to 127.33 +/- 22.84 ml/5 days. Sodium chloride intake (1.5%) increased in animals with electrolytic lesion of the SA from 10.0 +/- 1.73 to 15.5 +/- 1.95 ml/5 days after lesion. Also sodium chloride (1.5%) intake increased after ibotenic acid injection into the SA to a greater extent (from 7.83 +/- 1.25 to 14.33 +/- 1.87 ml/5 days). The results indicate that the water intake response may be due to lesions that involve cell bodies and fibers of passage and that the sodium intake response can also be induced by lesions which involve only cell bodies. Finally, these results led us to conclude that the SA uses its cell bodies and afferent bodies and fibers for processing inputs mediating water intake and salt appetite and that the cells bodies of the SA are implicated in increased water intake. (C) 1998 Elsevier B.V.

Analysis of depth of the microporosity in a nickel-chromium system alloy: effects of electrolytic, chemical and sandblasting etching

The present study was designed to analyse the average depth of the microporosity of a nickel-chromium (Ni-Cr) system alloy (Verabond II). The metal surface was subject to one of the following surface treatment: (i) Electrolytic etching in nitric acid 0.5 N at a current density of 250 mA cm(-2) ; (ii) chemical etching with CG-Etch etchant; and (iii) Sandblasting with alumina particles 50 mum. Half of the samples were polished before the surface treatments. The depth of porosity was measured through photomicrographs (500x) with a profilometer, and the data were statistically analysed using an analysis of variance (anova) followed by Tukey's test. The conclusions were (i) Differents surface treatment of the Ni-Cr system alloy lead to different depths of microporosity; (ii) the greatest depth of porosity was observed in non-polished alloy; (iii) the greatest and identical depth of microporosity was observed following electrolytic etching and chemical etching; (iv) the least and identical depth of microporosity was observed with chemical etching and sandblasting with alumina particles 50 mum, and (v) Chemical etching showed an intermediary depth.

Electrolytic treatment applied to the industrial effluent containing persistent wastes monitored by Bartha respirometric assays

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)