A modified auxiliary excitation signal for achieving unidirectional ion ejection in quadrupole ion trap mass spectrometers operating in the resonance ejection mode

This paper proposes a technique to cause unidirectional ion ejection in a quadrupole ion trap mass spectrometer operated in the resonance ejection mode. In this technique a modified auxiliary dipolar excitation signal is applied to the endcap electrodes. This modified signal is a linear combination of two signals. The first signal is the nominal dipolar excitation signal which is applied across the endcap electrodes and the second signal is the second harmonic of the first signal, the amplitude of the second harmonic being larger than that of the fundamental. We have investigated the effect of the following parameters on achieving unidirectional ion ejection: primary signal amplitude, ratio of amplitude of second harmonic to that of primary signal amplitude, different operating points, different scan rates, different mass to charge ratios and different damping constants. In all these simulations unidirectional ejection of destabilized ions has been successfully achieved. (C) 2015 Elsevier B.V. All rights reserved.

Ejection of energetic photoelectrons in laser-induced autoionisation: effects of high-order ionisation processes

Resonant interaction of an autoionising state with a strong laser field is considered and effects of second-order ionisation processes are investigated. The authors show that these processes play a very important role in laser-induced autoionisation (LIA). They drastically affect the lowest-order peaks in the photoelectron spectrum. In addition to these peaks, high-order peaks due to ejection of energetic photoelectrons appear. For the laser intensities of current interest, second-order peaks are much stronger than the original ones, an important result that, they believe, can be observed experimentally. Moreover, `peak switching', a general feature of above-threshold ionisation, is also manifest in the electron spectrum of LIA.

Chains of Non-regular de Branges Spaces

We consider canonical systems with singular left endpoints, and discuss the concept of a scalar spectral measure and the corresponding generalized Fourier transform associated with a canonical system with a singular left endpoint. We use the framework of de Branges’ theory of Hilbert spaces of entire functions to study the correspondence between chains of non-regular de Branges spaces, canonical systems with singular left endpoints, and spectral measures.

We find sufficient integrability conditions on a Hamiltonian H which ensure the existence of a chain of de Branges functions in the first generalized Pólya class with Hamiltonian H. This result generalizes de Branges’ Theorem 41, which showed the sufficiency of stronger integrability conditions on H for the existence of a chain in the Pólya class. We show the conditions that de Branges came up with are also necessary. In the case of Krein’s strings, namely when the Hamiltonian is diagonal, we show our proposed conditions are also necessary.

We also investigate the asymptotic conditions on chains of de Branges functions as t approaches its left endpoint. We show there is a one-to-one correspondence between chains of de Branges functions satisfying certain asymptotic conditions and chains in the Pólya class. In the case of Krein’s strings, we also establish the one-to-one correspondence between chains satisfying certain asymptotic conditions and chains in the generalized Pólya class.

Force chains, friction, and flow: Behavior of granular media across length scales

We study the behavior of granular materials at three length scales. At the smallest length scale, the grain-scale, we study inter-particle forces and "force chains". Inter-particle forces are the natural building blocks of constitutive laws for granular materials. Force chains are a key signature of the heterogeneity of granular systems. Despite their fundamental importance for calibrating grain-scale numerical models and elucidating constitutive laws, inter-particle forces have not been fully quantified in natural granular materials. We present a numerical force inference technique for determining inter-particle forces from experimental data and apply the technique to two-dimensional and three-dimensional systems under quasi-static and dynamic load. These experiments validate the technique and provide insight into the quasi-static and dynamic behavior of granular materials.

At a larger length scale, the mesoscale, we study the emergent frictional behavior of a collection of grains. Properties of granular materials at this intermediate scale are crucial inputs for macro-scale continuum models. We derive friction laws for granular materials at the mesoscale by applying averaging techniques to grain-scale quantities. These laws portray the nature of steady-state frictional strength as a competition between steady-state dilation and grain-scale dissipation rates. The laws also directly link the rate of dilation to the non-steady-state frictional strength.

At the macro-scale, we investigate continuum modeling techniques capable of simulating the distinct solid-like, liquid-like, and gas-like behaviors exhibited by granular materials in a single computational domain. We propose a Smoothed Particle Hydrodynamics (SPH) approach for granular materials with a viscoplastic constitutive law. The constitutive law uses a rate-dependent and dilation-dependent friction law. We provide a theoretical basis for a dilation-dependent friction law using similar analysis to that performed at the mesoscale. We provide several qualitative and quantitative validations of the technique and discuss ongoing work aiming to couple the granular flow with gas and fluid flows.

Stationary absolute distributions for chains of infinite order

Let {Ƶ_n}^∞_{n = -∞} be a stochastic process with state space S₁ = {0, 1, …, D – 1}. Such a process is called a chain of infinite order. The transitions of the chain are described by the functions

Q_i(i⁽⁰⁾) = Ƥ(Ƶ_n = i | Ƶ_{n - 1} = i ⁽⁰⁾₁, Ƶ_{n - 2} = i ⁽⁰⁾₂, …) (i ɛ S₁), where i⁽⁰⁾ = (i⁽⁰⁾₁, i⁽⁰⁾₂, …) ranges over infinite sequences from S₁. If i⁽ⁿ⁾ = (i⁽ⁿ⁾₁, i⁽ⁿ⁾₂, …) for n = 1, 2,…, then i⁽ⁿ⁾ → i⁽⁰⁾ means that for each k, i⁽ⁿ⁾_k = i⁽⁰⁾_k for all n sufficiently large.

Given functions Q_i(i⁽⁰⁾) such that

(i) 0 ≤ Q_i(i⁽⁰) ≤ ξ ˂ 1

(ii)D – 1/Ʃ/i = 0 Q_i(i⁽⁰⁾) Ξ 1

(iii) Q_i(i⁽ⁿ⁾) → Q_i(i⁽⁰⁾) whenever i⁽ⁿ⁾ → i⁽⁰⁾,

we prove the existence of a stationary chain of infinite order {Ƶ_n} whose transitions are given by

Ƥ (Ƶ_n = i | Ƶ_{n - 1}, Ƶ_{n - 2}, …) = Q_i(Ƶ_{n - 1}, Ƶ_{n - 2}, …)

With probability 1. The method also yields stationary chains {Ƶ_n} for which (iii) does not hold but whose transition probabilities are, in a sense, “locally Markovian.” These and similar results extend a paper by T.E. Harris [Pac. J. Math., 5 (1955), 707-724].

Included is a new proof of the existence and uniqueness of a stationary absolute distribution for an Nth order Markov chain in which all transitions are possible. This proof allows us to achieve our main results without the use of limit theorem techniques.

Impacts of climate change and variability on fish value chains in Uganda

This study examines the vulnerability of fish pr oduction in Uganda, particularly as it r elates to the predicted impacts from climate change, using the concept of the value chain. The value chain approach has been recommended as a useful tool to study specific challenges facing a sector resulting from various drivers of change, including climate. Critically, such analyses can reveal context-specific response strategies to enhance a sector (Jacinto and Pomer oy 2010). The specific purpose of the study was to identify curr ent and potential impacts of climate change and corresponding adaptation strategies in fish value chains. The study builds upon information fr om earlier value chain analyses on fisheries and aquaculture production in Uganda to provide a more in-depth understanding of issues facing the fish industry, in particular, those to be incorporated in the CGIAR Resear ch Program Livestock and Fish.

Uganda aquaculture value chains: strategic planning mission: summary report

This report presents the findings and recommendations of a strategic planning mission to reevaluate the feasibility of WorldFish implementing a fish value chain research program in Uganda under the CGIAR Research Program on Livestock and Fish (L&F). The over-arching goal of L&F is to increase productivity of small-scale livestock and fish systems so as to increase availability and affordability of meat, milk and fish for poor consumers and, in doing so, to reduce poverty through greater participation by the poor along animal source food value chains. This will be achieved by making a small number of carefully selected animal source food value chains function better, for example by identifying and addressing key constraints and opportunities (from production to consumption), improving institutional arrangements and capacities, and supporting the establishment of enabling pro-poor policy and institutional environments.

Uganda aquaculture value chains: strategic planning mission report

This report presents the findings and recommendations of a strategic planning mission to reevaluate the feasibility of WorldFish implementing a fish value chain research program in Uganda under the CGIAR Research Program on Livestock and Fish (L&F). The over-arching goal of L&F is to increase productivity of small-scale livestock and fish systems so as to increase availability and affordability of meat, milk and fish for poor consumers and, in doing so, to reduce poverty through greater participation by the poor along animal source food value chains. This will be achieved by making a small number of carefully selected animal source food value chains function better, for example by identifying and addressing key constraints and opportunities (from production to consumption), improving institutional arrangements and capacities, and supporting the establishment of enabling pro-poor policy and institutional environments.