Metaphorisms in programming

This paper introduces the metaphorism pattern of relational specification and addresses how specification following this pattern can be refined into recursive programs. Metaphorisms express input-output relationships which preserve relevant information while at the same time some intended optimization takes place. Text processing, sorting, representation changers, etc., are examples of metaphorisms. The kind of metaphorism refinement proposed in this paper is a strategy known as change of virtual data structure. It gives sufficient conditions for such implementations to be calculated using relation algebra and illustrates the strategy with the derivation of quicksort as example.

Mejoramiento del comportamiento térmico de sistemas de calentamiento de agua solares termosifónicos hechos con materiales no convencionales y con tanques de almacenamiento verticales y horizontales Performance improvement of solar thermosyphonic systems for water heating made of non conventional materials and using horizontal and vertical storage tanks

El objeto de estudio de este proyecto son los sistemas de calentamiento de agua mediante energía solar que funcionan termosifónicamente. En particular se tratará con dos diseños particulares generados por fabricantes de la Provincia de Córdoba y que han solicitado el asesoramiento del Grupo de Energía Solar (GES) para el mejoramiento de la performance térmica de dichos equipos. Se trata de dos sistemas que tienen materiales no tradicionales y se diferencian además por tener una distinta disposición del tanque de almacenamiento: uno es en forma vertical y el otro en forma horizontal. Basados en los resultados de un ensayo bajo norma internacional, donde se detectaron algunas puntos factibles de mejora, se propone en este proyecto el análisis en detalle de los equipos, para lo cual se les debe desarmar completos, para realizar un estudio analítico y experimental de los mismos con el objeto de hacer un planteo teórico-analítico del comportamiento de los mismos, con la implementación de propuestas de mejora y chequeo de los resultados. Se propone entonces como objetivo lograr un mejoramiento de la performance térmica de los citados equipos a partir de un estudio experimental y analítico. Asumiendo esta posibilidad de mejora, se plantea la hipótesis de que es posible representar el funcionamiento de estos equipos mediante modelos físico-matemáticos desarrollados a partir de ecuaciones y correlaciones conocidas y procesos a interpretar mediante resoluciones numéricas y softwares específicos de simulación. De esta manera, se plantea el despieze completo de los equipos para estudiar en detalle su estructura y conexiones internas y a partir de la geometría, dimensiones y propiedades termofísicas de materiales constructivos y fluidos de trabajo, realizar modelos físico-matemáticos que permitan realizar variaciones de propiedades y geometría y así buscar las mejores combinaciones que produzcan equipos más eficientes térmicamente. Los modelos físico-matemáticos serán codificados en lenguajes de alto nivel para poder luego de una validación de los modelos, correr simulaciones en un software de reconocimiento internacional que permite sumar dichos modelos mediante un protocolo de comunicación, haciendo que las poderosas prestaciones del software se puedan aplicar a nuestros modelos. Se complementará el estudio con un análisis exergético para identificar los puntos críticos en que se producen las pérdidas de oportunidad de aprovechar la energía disponible, para así analizar cómo solucionar los problemas en dichos puntos. Los materiales a utilizar serán los propios equipos provistos por los fabricantes, que serán modificados convenientemente para operarlos como prototipos Se espera obtener un conocimiento acabado de los procesos y principios de funcionamiento de los equipos, que permita plantear las mejoras, las cuales se implementarán en los prototipos, realizándose una medición mediante norma igual a la inicial para ver en que magnitud se logran las mejoras esperadas. Se pretende además que las mejoras a implementar, en la etapa de transferencia a las empresas involucradas, redunden no sólo en un beneficio técnico, sino que también los sea desde el punto de vista económico. Para ello se trabajará también sobre los procesos y métodos de fabricación para que los equipos mejorados no sean mas caros que los originales y de ser posible sean aún más económicos, todo esto apuntando a la difusión de la energía solar térmica y poner al alcance de todos estos equipos tan convenientes para la propagación de las energías limpias. El proyecto redundará también en un importante beneficio para el conocimiento de la comunidad científica en general, con el aporte de nuevos resultados en diseños novedosos y con nuevos materiales. Además, la institución se beneficiará con la formación que obtendrán los integrantes del proyecto, muchos de ellos en etapa de realización de sus estudios de posgrado y en una etapa importante de su vida como investigadores. The main goal of this project is the improvement of two thermosyphonic solar water heating systems, made of non conventional materials and with different arrangement of their storage tanks: one is vertical and the other one horizontal. The thermosyphonic systems are provided by manufacturers of the Córdoba Province, who came to the Solar Energy Group (GES) of the National University of Río Cuarto looking for help for the design of their products. In an agreement with these manufacturers, it was proposed this project in order to work analytically and experimentally in order to obtain physical-mathematical models of these two systems, which allow for changes to look by means of simulations the best changes to implement on the equipments for the improvement of their thermal performance. Then, the materials to be used are the proper systems provided by the manufacturers, which will be disarmed to be studied in detail. After the analytical study the proposals of improvement will be implemented in a high level language of programming to perform simulations in the environment of a well-known software for energy simulations (TRNSYS). After the simulations, the best modifications will be physically implemented in the prototypes to perform finally the same normalized test of the beginning and check the magnitude of the implemented improvements. The importance of this project is based on the offer of better systems the companies would make, which would benefit the deployment of the thermal solar energy. Another relevant point is to make the new equipments at the same cost of the previous ones or cheaper, in order to achieve a good deployment of the solar water heating systems; then, the manufacture processes and methods must be studied to obtain not only good technical solutions, but also economical equipments. In addition, this project will contribute to the increasing of the knowledge in the area of thermosyphonic solar systems and the training of postgraduate students.

Design of a bifurcated stent graft, with its accompanying delivery system.

Abdominal Aortic Aneurysms (AAA) haemorhaging is a life-threatening disease. An aneurysm is a permanent swelling of an artery due to a weakness in its wall. Current surgical repair involves opening the chest or abdomen, gaining temporary vascular control of the aorta and suturing a prosthetic graft to the healthy aorta within the aneurysm itself The outcome of this surgical approach is not perfect, and the quality of life after this repair is impaired by postoperative pain, sexual dysfunction, and a lengthy hospital stay resulting in high health costs. All these negative effects are related to the large incision and extensive tissue dissection. Endovascular grafting is an alternative to the standard surgical method. This treatment is a less invasive method of treating aortic aneurysms. It involves a surgical exposure of the common femoral arteries where the stent graft can be inserted through by an over-the-wire technique. All manipulations are controlled from a remote place by the use of a catheter and this technique avoids the need to directly expose the diseased artery through a large incision or an extensive dissection. The proposed design method outlined in this project is to develop the endovascular approach. The main aim is to design an unitary bifurcated stent graft (1 e- bifurcated graft as a single component) to treat these Abdominal Aortic Aneurysms. This includes the delivery system and deployment mechanism necessary to first accurately position the stent graft across the aneurysm sac and also across the iliac bifurcation, and secondly fix the stent graft in position by using expandable metal stents. Thus, excluding the aneurysm from the circulation and therefore preventing rupture. Miniaturisation is a critical aspect of this design, as the smaller the crimped stent graft the easier to guide through the vascular system to the desired location. Biocompatibility is an important aspect. The preferred materials for this prosthesis are to use Shape Memory Alloys for the stent and a multifilament fabric for the graft. A taper design is applied for the geometry as this gives a favourable flow characteristic and reduced wave reflections. Adequate testing of the stent graft to prove its durability and the ease of the method of deployment is a prerequisite. A bench test facility has being designed and build to replicate the cardiovascular system and the disease in question aortic aneurysms at the iliac bifurcation. The testing here shows the feasibility of the proposed delivery system and the durability of the stent graft across the aneurysm sac. Finally, these endovascular treatments offer the economic advantage of short hospital stays or even treatment as an outpatient, as well as elimination of the need for postoperative intensive care The risk of developing an aneurysm increases with age, that is one of the mam reasons to look for less invasive ways of treating aneurysms. Consequently, there is enormous pressure to develop and use these devices rapidly.

Markup Test Reader: eina de creació i lectura de formularis de test

El projecte exposat en aquestes pàgines és un document d'estudi, anàlisi, disseny, programació i procés de proves en la confecció d'una aplicació de creació i lectura de formularis de test. Aquesta aplicació parteix de les possibilitats de millora de les prestacions, usabilitat i escalabilitat que poden oferir les tècniques de visió en computador en aquest camp. El projecte s'ha basat en un exemple en concret per tal d'oferir una eina vàlida per a la automatització de les tasques que en una empresa de recursos humans es poden donar a l'hora de gestionar la informació dels test psicotècnics que necessiten gestionar. El projecte parteix d'unes premisses bàsiques tals com: l'ús de tècniques en visió per computador, la modularitat, el compliment d'estàndards, la facilitat d'ús i la facilitat en la gestió de canvis.

The nature of autoantigens

1. Autoimmunity in deisease is driven by autoantigen; 2. Cell surface molecules may stimulate autoreactive T-helpers if call II MHC is expressed; special factors may predispose to the ease of class II induction; 3. Soluble autoantigens may be focussed by primed B-cells and processed for presentation to T-cell; 4. autoantigenicity may be influenced by metabolic events: (a) Poorly iodinated thyroglobulin does not induce thyroiditis; (b) IgG rheumatoid arthritis has galactose deficient Fc oligosaccharides. Glycosylation defects may prove to have wide implications.

Field evaluation of an exoantigen-containing Babesia vaccine in Venezuela

Bovine babesiosis is endemic in Venezuela, causing significant losses in highly susceptible imported cattle. Current immunoprphylatic methods include the less desirable use of live parasites. Inactivated vaccines derived from exoantigen-containing supernatant fluids of in vitro Babesia bovis and B. bigemina cultures have been developed and constitute a major improvement in vaccine safety, stability and ease of handling. Vaccination trials conducted under field conditions provide the final evaluation of a culture-derived B. bovis-B. bigemina vaccine. During a 5-year period, approximately 8,000 cattle were vaccinated and 16 clinical trials carried out in. 7 states of Venezuela Clinical, serologic and parasitologic data were collected monthly from 10% of the animals over a 2-year period. Data were also collected from a similar number of nonvaccinated control cattle. Analysis of results from these trials demonstrated a reduction in the incidence of clinical disease among vaccinated animals and complete protection against mortality among vaccinated and nonvaccinated cattle. Use of this inactivated vaccine offers the best combination od safety, potency and efficacy for thew immunoprophylatic control of bovine babesiosis.

Visceral leishmaniasis in Teresina, state of Piauí, Brazil: preliminary observations on the detection and transmissibility of canine and sandfly infections

A Leishmania donovani-complex specific DNA probe was usedto confirm the widespread dissemination of amastigotes in apparently normal skinof dogs with canine visceral leishmaniasis. When Lutzomyia longipalpis were fed on abnormal skin of five naturally infected dogs 57 of 163 (35 per cent) fliesbecame infected: four of 65 flies (6 per cent) became infected when fed on apparently normal skin. The bite of a single sandfly that had fed seven days previouslyon a naturally infected dog transmitted the infection to a young dog from a non-endemic area. Within 22 days a lesion had developed at the site of the infectivebite (inner ear): 98 days after infection organisms had not disseminated throughout the skin, bone marrow, spleen or liver and the animal was still serologically negative by indirect immunofluorescence and dot-enzyme-linked immunosorbent assay. When fed Lu. longipalpis were captured from a kennel with a sick dog known to be infected, 33 out of 49 (67 per cent) of flies contained promastigotes. In contrast only two infections were detected among more than 200 sandflies captured in houses. These observations confirm the ease of transmissibility of L.chagasi from dog to sandfly to dog in Teresina. It is likely that canine VL is the major source of human VL by the transmission route dog-sandfly-human. the Lmet2 DNA probe was a useful epidemiological tool for detecting L. chagasi in sandflies.

Diagnosis of malaria by acridine orange fluorescent microscopy in an endemic area of Venezuela

Fluorescent (acridine orange) microscopical examination of capillary centrifuged blood (quantitative buffy coat [QBC®] analysis) and Giemsa stained thick blood smears (GTS) were compared for diagnosis of malaria in blood specimens from adults living in malaria transmission areas of the States of Bolivar and Amazonas in southeastern and south Venezuela, respectively. Of a total of 198 GTS examined, 95 subjects (48%) showed parasitaemia. Among the 95 blood films with a positive GTS, 94 were judged positive by the QBC. However, positive QBC tubes were found in 29 out of 103 blood specimens with a negative GTS. Thus, relative to a GTS standard, the sensitivity and specificity of the QBC-test was 99.2% and 72%, respectively. Young trophozoites of Plasmodium vivax and P. falciparum could not be distinguished with certainty. It is confirmed that the QBC offers many advantages compared with the standard diagnosis of malaria parasites, specifically in the speed of staining and ease of interpretation. However, in places where P. falciparum and P. vivax occur, species and stage differentiation should be confirmed with the GTS.

Mixture of bivariate Poisson regression models with an application to insurance

In a recent paper Bermúdez [2009] used bivariate Poisson regression models for ratemaking in car insurance, and included zero-inflated models to account for the excess of zeros and the overdispersion in the data set. In the present paper, we revisit this model in order to consider alternatives. We propose a 2-finite mixture of bivariate Poisson regression models to demonstrate that the overdispersion in the data requires more structure if it is to be taken into account, and that a simple zero-inflated bivariate Poisson model does not suffice. At the same time, we show that a finite mixture of bivariate Poisson regression models embraces zero-inflated bivariate Poisson regression models as a special case. Additionally, we describe a model in which the mixing proportions are dependent on covariates when modelling the way in which each individual belongs to a separate cluster. Finally, an EM algorithm is provided in order to ensure the models’ ease-of-fit. These models are applied to the same automobile insurance claims data set as used in Bermúdez [2009] and it is shown that the modelling of the data set can be improved considerably.

Can You Home Again? Desertion and Control of Hometowns in Civil Wars

What allows an armed group in a civil war to prevent desertion? This paper addresses this question with a focus on control in the rearguard. Most past studies focus on motivations for desertion. They explain desertion in terms of where soldiers stand in relation to the macro themes of the war, or in terms of an inability to provide positive incentives to overcome the collective action problem. However, since individuals decide whether and how to participate in civil wars for multiple reasons, responding to a variety of local conditions in an environment of threat and violence, a focus only on macro-level motivations is incomplete. The opportunities side of the ledger deserves more attention. I therefore turn my attention to how control by an armed group eliminates soldiers’ opportunities to desert. In particular, I consider the control that an armed group maintains over soldiers’ hometowns, treating geographic terrain as an important exogenous indicator of the ease of control. Rough terrain at home affords soldiers and their families and friends advantages in ease of hiding, the difficulty of using force, and local knowledge. Based on an original dataset of soldiers from Santander Province in the Spanish Civil War, gathered from archival sources, I find statistical evidence that the rougher the terrain in a soldier’s home municipality, the more likely he is to desert. I find complementary qualitative evidence indicating that soldiers from rough-terrain communities took active advantage of their greater opportunities for evasion. This finding has important implications for the way observers interpret different soldiers’ decisions to desert or remain fighting, for the prospect that structural factors may shape the cohesion of armed groups, and for the possibility that local knowledge may be a double-edged sword, making soldiers simultaneously good at fighting and good at deserting.

Ultrasound monitoring of structural urinary tract disease in Schistosoma haematobium infection

A major advance in our understanding of the natural history of Schistosoma haematobium-related morbidity has come through the introduction of the portable ultrasound machines for non-invasive examination of the kidneys and bladder. With the use of generators or battery packs to supply power in non-clinical field settings, and with the use of instant photography or miniaturized thermal printers to record permanent images, it is possible to examine scores of individuals in endemic communities every day. Broad-based ultrasound screening has allowed better definition of age-specific disease risks in urinary schistosomiasis. Results indicate that urinary tract abnormalities are common (18% overall prevalence) in S. haematobium transmission areas, with a 2-4% risk of either severe bladder abnormality or advanced ureteral obstruction. In longitudinal surveys, ultrasound studies have shown that praziquantel and metrifonate therapy are rapidly effective in reversing urinary tract abnormalities among children. The benefits of treating adults are less well known, but research in progress should help to define this issue. Similarly, the prognosis of specific ultrasound findings needs to be clarified, and the ease of sonographic examination will make such long-term follow-up studies feasible. In summary, the painless, quick, and reproducible ultrasound examination has become an essential tool in the study of urinary schistosomiasis.

Evaluation of high frequency jet ventilation in patients undergoing percutaneous thermal ablation

Purpose: To evaluate the use of high frequency jet ventilation (HFJV) in patients undergoing percutanous thermal ablation procedures.Materials: From may to september 2011 patients with lung, liver or kidney tumors suitable for percutanous thermal ablation were prospectively enrolled to be treated under general anesthesia using HFJV instead of conventional positive pressure ventilation (PPV). Our primary endpoint was feasability of HFJV during percutanous ablation, our secondary endpoints were assessment of breathing related movements by image fusion (CT/US), precision and ease of needle placement by number of CT aquisition/needle reposition and procedure related complications.Results: Twenty-nine patients (21 males, 8 females mean age 66.2 years) with 30 liver tumors, 1 kidney tumors and 6 lung tumors were included. Tumor ablation was performed by radiofrequency (RFA) in 26 cases, microwaves ( MWA) in 2 and cryoablation (CRA) in 1. The ablation procedure could be completed under HFJV in 22 patients. In 2 patients HFVJ had to be stopped in favor of PPV because the tumor was better seen under PPV. HFJV was not performed in 5. Breathing related movements of the target lesion in the cranio-caudal direction as estimated by image fusion were always inferior to 5mm compared to 20mm when patients are under PPV. Needle placement was straightforward under CT as well as US. No patient needed needle repositionning before ablation. We did not observe any HFJV related complications.Conclusions: HFJV significantly reduces breathing movements of target lesion during percutaneous ablation procedures. It does not seem to cause any particular complication. However in some cases such as tumors located at the base of the lungs or in the dome of the liver, the target may be best seen under PPV.

OECD Thematic Review of Early Childhood Education and Care Policy in Ireland

Ireland is one of the smallest countries in Europe and occupies the most westerly, peripheral position. Geographically, the entire island is comprised of 32 counties, 26 of which make up the Republic of Ireland, (commonly referred to as the South), and 6 of which go to make up Northern Ireland (usually called the North), which forms part of the United Kingdom. This report is concerned with the Republic of Ireland only, which will be referred to as Ireland in the remainder of this report for ease of reading.

Director of Public Health Annual Report 2014

This is the sixth Director of Public Health Annual Report, detailing the main public health challenges in Northern Ireland. It also provides information on the wide variety of work undertaken by the PHA and its partners during 2014 to improve the health and social wellbeing of the population. Each year, the report focuses on an overarching area, which this year is ‘Adults aged 18–64 years’. The report structure reflects the main areas of public health action: improving health and reducing inequalities; improving health through early detection; improving health through high quality services; improving health through research; protecting health. For ease of reference, the sections are colour coded. On page 94, the report also lists core tables for 2013 relating to key statistical data on, among others, population, birth and death rates, mortality by cause, life expectancy, immunisation and screening. The PDF document of the Core tables is available below. In addition to the core tables, a specific set of tables relating to various aspects of adults aged 18–64 years are published alongside this report.

The development of the Quality Indicator for Rehabilitative Care (QuIRC): a measure of best practice for facilities for people with longer term mental health problems

BACKGROUND: Despite the progress over recent decades in developing community mental health services internationally, many people still receive treatment and care in institutional settings. Those most likely to reside longest in these facilities have the most complex mental health problems and are at most risk of potential abuses of care and exploitation. This study aimed to develop an international, standardised toolkit to assess the quality of care in longer term hospital and community based mental health units, including the degree to which human rights, social inclusion and autonomy are promoted. METHOD: The domains of care included in the toolkit were identified from a systematic literature review, international expert Delphi exercise, and review of care standards in ten European countries. The draft toolkit comprised 154 questions for unit managers. Inter-rater reliability was tested in 202 units across ten countries at different stages of deinstitutionalisation and development of community mental health services. Exploratory factor analysis was used to corroborate the allocation of items to domains. Feedback from those using the toolkit was collected about its usefulness and ease of completion. RESULTS: The toolkit had excellent inter-rater reliability and few items with narrow spread of response. Unit managers found the content highly relevant and were able to complete it in around 90 minutes. Minimal refinement was required and the final version comprised 145 questions assessing seven domains of care. CONCLUSIONS: Triangulation of qualitative and quantitative evidence directed the development of a robust and comprehensive international quality assessment toolkit for units in highly variable socioeconomic and political contexts