Carbon prices. Dynamic analysis of European and Californian markets

Dissertação para obtenção do Grau de Doutor em Alterações Climáticas e Políticas de Desenvolvimento Sustentável

Application of NMR RDC’s, relaxation and self-diffusion for the study of dynamic processes of small molecules in solution

Spin-lattice Relaxation, self-Diffusion coefficients and Residual Dipolar Couplings (RDC’s) are the basis of well established Nuclear Magnetic Resonance techniques for the physicochemical study of small molecules (typically organic compounds and natural products with MW < 1000 Da), as they proved to be a powerful and complementary source of information about structural dynamic processes in solution. The work developed in this thesis consists in the application of the earlier-mentioned NMR techniques to explore, analyze and systematize patterns of the molecular dynamic behavior of selected small molecules in particular experimental conditions. Two systems were chosen to investigate molecular dynamic behavior by these techniques: the dynamics of ion-pair formation and ion interaction in ionic liquids (IL) and the dynamics of molecular reorientation when molecules are placed in oriented phases (alignment media). The application of NMR spin-lattice relaxation and self-diffusion measurements was applied to study the rotational and translational molecular dynamics of the IL: 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4]. The study of the cation-anion dynamics in neat and IL-water mixtures was systematically investigated by a combination of multinuclear NMR relaxation techniques with diffusion data (using by H1, C13 and F19 NMR spectroscopy). Spin-lattice relaxation time (T1), self-diffusion coefficients and nuclear Overhauser effect experiments were combined to determine the conditions that favor the formation of long lived [BMIM][BF4] ion-pairs in water. For this purpose and using the self-diffusion coefficients of cation and anion as a probe, different IL-water compositions were screened (from neat IL to infinite dilution) to find the conditions where both cation and anion present equal diffusion coefficients (8% water fraction at 25 ºC). This condition as well as the neat IL and the infinite dilution were then further studied by 13C NMR relaxation in order to determine correlation times (c) for the molecular reorientational motion using a mathematical iterative procedure and experimental data obtained in a temperature range between 273 and 353 K. The behavior of self-diffusion and relaxation data obtained in our experiments point at the combining parameters of molar fraction 8 % and temperature 298 K as the most favorable condition for the formation of long lived ion-pairs. When molecules are subjected to soft anisotropic motion by being placed in some special media, Residual Dipolar Couplings (RDCs), can be measured, because of the partial alignment induced by this media. RDCs are emerging as a powerful routine tool employed in conformational analysis, as it complements and even outperforms the approaches based on the classical NMR NOE or J3 couplings. In this work, three different alignment media have been characterized and evaluated in terms of integrity using 2H and 1H 1D-NMR spectroscopy, namely the stretched and compressed gel PMMA, and the lyotropic liquid crystals CpCl/n-hexanol/brine and cromolyn/water. The influence that different media and degrees of alignment have on the dynamic properties of several molecules was explored. Different sized sugars were used and their self-diffusion was determined as well as conformation features using RDCs. The results obtained indicate that no influence is felt by the small molecules diffusion and conformational features studied within the alignment degree range studied, which was the 3, 5 and 6 % CpCl/n-hexanol/brine for diffusion, and 5 and 7.5 % CpCl/n-hexanol/brine for conformation. It was also possible to determine that the small molecules diffusion verified in the alignment media presented close values to the ones observed in water, reinforcing the idea of no conditioning of molecular properties in such media.

Dynamic stiffness of the piled foundation of a onshore wind turbine

One of today's biggest concerns is the increase of energetic needs, especially in the developed countries. Among various clean energies, wind energy is one of the technologies that assume greater importance on the sustainable development of humanity. Despite wind turbines had been developed and studied over the years, there are phenomena that haven't been yet fully understood. This work studies the soil-structure interaction that occurs on a wind turbine's foundation composed by a group of piles that is under dynamic loads caused by wind. This problem assumes special importance when the foundation is implemented on locations where safety criteria are very demanding, like the case of a foundation mounted on a dike. To the phenomenon of interaction between two piles and the soil between them it's given the name of pile-soil-pile interaction. It is known that such behavior is frequency dependent, and therefore, on this work evaluation of relevant frequencies for the intended analysis is held. During the development of this thesis, two methods were selected in order to assess pile-soil-pile interaction, being one of analytical nature and the other of numerical origin. The analytical solution was recently developed and its called Generalized pile-soil-pile theory, while for the numerical method the commercial nite element software PLAXIS 3D was used. A study of applicability of the numerical method is also done comparing the given solution by the nite element methods with a rigorous solution widely accepted by the majority of the authors.

Tool for spatial and dynamic representation of artistic performances

This proposal aims to explore the use of available technologies for video representation of sets and performers in order to serve as support for composition processes and artistic performer rehearsals, while focusing in representing the performer’s body and its movements, and its relation with objects belonging to the three-dimensional space of their performances. This project’s main goal is to design and develop a system that can spatially represent the performer and its movements, by means of capturing processes and reconstruction using a camera device, as well as enhance the three-dimensional space where the performance occurs by allowing interaction with virtual objects and by adding a video component, either for documentary purposes, or for live performances effects (for example, using video mapping video techniques in captured video or projection during a performance).

Dynamic behavior of sylvatic yellow fever in Brazil (1954-2008)

INTRODUCTION: Sylvatic yellow fever (SYF) is enzootic in Brazil, causing periodic outbreaks in humans living near forest borders or in rural areas. In this study, the cycling patterns of this arbovirosis were analyzed. METHODS: Spectral Fourier analysis was used to capture the periodicity patterns of SYF in time series. RESULTS: SYF outbreaks have not increased in frequency, only in the number of cases. There are two dominant cycles in SYF outbreaks, a seven year cycle for the central-western region and a 14 year cycle for the northern region. Most of the variance was concentrated in the central-western region and dominated the entire endemic region. CONCLUSIONS: The seven year cycle is predominant in the endemic region of the disease due the greater contribution of variance in the central-western region; however, it was possible identify a 14 cycle that governs SYF outbreaks in the northern region. No periodicities were identified for the remaining geographical regions.

Tensile properties of polymer repair materials - effect of test parameters

In this research, five types of polymer repair materials were selected for investigation of the influence of sample shape, deformation rate and test temperature on the mechanical properties determined with an uniaxial tensile test. The results showed the clear effect of measurement conditions on tensile strength, elongation and modulus of elasticity. The highest tensile strength and modulus of elasticity were exhibited by epoxy resin for the filling of concrete cracks, which achieved 1% elongation. The lowest coefficient of dispersion characterized the results of tensile test carried out using dumbbell samples at a deformation rate of 50 mm/min. The effect of temperature varied with the material type.

Mechanical characterization of old chestnut beams

The main objective of this work is to evaluate, by non-destructive techniques, seven old Chestnut beams. For that, after the geometric assessment and the detailed visual inspection that allowed to strength grade the beams, a series of non-destructive tests was setup. In a first step, non-destructive bending tests, under the elastic limit, were performed to quantify the modulus of elasticity in bending (MoE) of the seven beams. Then, Resistograph® and Pilodyn® tests were done to assess the superficial decay and to have aclearer idea of the voids dimensions. Then, two beams were tested in bending until failure to evaluate the bending strength. In a second step, end parts were cut from the beams, one per end of the beams, to perform Resistograph®, Pilodyn® and ultrasound tests, to quantify the density of the beams and to extract meso-specimens to be used in tension parallel to the grain tests

Survey and dynamic behaviour of the Our Lady of Conception Church, Portugal

The Our Lady of Conception church is located in village of Monforte (Portugal) and is not in use nowadays. The church presents structural damage and, consequently, a study was carried out. The study involved the survey of the damage, dynamic identification tests under ambient vibration and the numerical analysis. The church is constituted by the central nave, the chancel, the sacristy and the corridor to access the pulpit. The masonry walls present different thickness, namely 0.65 m in the chancel, 0.70 m in the sacristy, 0.92 in the central nave and 0.65 m in the corridor. The masonry walls present 8 buttresses with different dimensions. The total longitudinal and transversal dimensions of the church are equal to 21.10 m and 14.26 m, respectively. The survey of the damage showed that, in general, the masonry walls are in good conditions, with exception of the transversal walls of the nave, which present severe cracks. The arches of the vault presents also severe cracks along the central nave. As consequence, the infiltrations have increased the degradation of the vault and paintings. Furthermore, the foundations present settlements in the Southwest direction. The dynamic identification test were carried out under the action of ambient excitation of the wind and using 12 piezoelectric accelerometers of high sensitivity. The dynamic identification tests allowed to estimate the dynamic properties of the church, namely frequencies, mode shapes and damping ratios. A FEM numerical model was prepared and calibrated, based on the first four experimental modes estimated in the dynamic identification tests. The average error between the experimental and numerical frequencies of the first four modes is equal to 5%. After calibration of the numerical model, pushover analyses with a load pattern proportional to the mass, in the transversal and longitudinal direction of the church, were performed. The results of the analysis numerical allow to conclude that the most vulnerable direction of the church is in the transversal one and the maximum load factor is equal to 0.35.

Patrones dinámicos de abundancia y dispersión de una plaga en un paisaje heterogéneo. Dynamic patterns of abundance and dispersion of a pest in a heterogeneous landscape.

El desarrollo de conocimiento empírico sobre cómo la heterogeneidad espacial de un paisaje afecta los patrones de movimiento de una especie animal es considerado una prioridad para el manejo y la conservación de las especies y sus hábitats. En el caso de los insectos plaga, estos estudios resultan importantes ya que aportan las bases teóricas y empíricas fundamentales para su manejo. La persistencia de éstas especies en un paisaje modificado depende de la interrelación entre procesos ecológicos y la estructura del paisaje, tales como la interacción entre especies, la disponibilidad de parches hábitat y la influencia de las prácticas de manejo. El análisis de éstos procesos en un agroecosistema permite simplificar los modelos de heterogeneidad espacial, debido a que los lotes de cultivo son internamente homogéneos y los disturbios antropogénicos generalmente ocurren a la escala de parche, permitiendo determinar las respuestas de los insectos a dicha escala. La alfalfa (Medicago sativa) es un recurso fundamental para la producción agropecuaria y en Argentina, es el recurso forrajero más importante, constituyendo la base de la producción ganadera del país. Actualmente se cultivan alrededor de 5 millones de hectáreas, de las cuales un millón se siembran en la provincia de Córdoba. Además, cumple un rol importante en la sustentabilidad de los sistemas de producción por su función de recuperación de la fertilidad y estabilidad edáfica. La isoca de la alfalfa (Colias lesbia) es la plaga principal del cultivo, produciendo en promedio la pérdida de un corte por año. La hipótesis principal de nuestro trabajo es que los patrones de abundancia y movilidad de la isoca de la alfalfa son afectados por la estructura del paisaje y las prácticas de manejo. Los objetivos específicos del proyecto son: (a) Establecer el efecto de la estructura del paisaje y y el manejo del cultivo en la abundancia de los distintos estadios de Colias lesbia. (b) Determinar los patrones de dispersión de Colias lesbia en relación a la heterogeneidad espacial del paisaje (c) Generar un modelo predictivo de la abundancia de Colias lesbia según la estructura espacial del paisaje, el clima y el manejo del cultivo. (d) Desarrollar un conjunto de recomendaciones de manejo a escala regional para el control de la isoca de la alfalfa. Para ello se elegirán lotes de alfalfa en la región este de la provincia de Córdoba, en el departamento de San Justo, donde se realizará un relevamiento inicial del área de estudio y se dialogará con los productores. Paralelamente, se realizará una clasificación supervisada del área de estudio a partir de escenas de imágenes Landsat TM. En los parches seleccionados, durante 3 años y durante los meses de verano, se muestrearán quincenalmente los distintos estadios de Colias lesbia. Se realizarán análisis de correlación y regresión entre las variables independientes (métricas de la configuración y dinámica del paisaje) y las variables dependientes, (abundancia media de los diferentes estadios de las poblaciones). Asimismo, se realizarán experimentos de marcado-liberación-recaptura para determinar cómo el movimiento de la especie depende de la estructura del paisaje. Para modelar el movimiento inherente de la especie se combinará la información obtenida en el campo con un modelo de difusión utilizando métodos bayesianos. Se espera obtener modelos que permitan comprender los mecanismos que generan los patrones observados. Con esta información se propondrán lineamientos generales y específicos para un manejo de la isoca de la alfalfa a escala regional. En tal sentido, se espera aportar información para restringir la dispersión de la plaga, y reducir los costos y perjuicios del control químico que podrían evitarse con la aplicación de prácticas de manejo integrado y de "manejo de área" que minimicen el impacto de la plaga como también contribuir al conocimiento general de la ecología de insectos.

JAVADAPTOR : unrestricted dynamic updates of Java applications

In dieser Arbeit wird mit JAVADAPTOR ein Ansatz präsentiert, der die statisch getypte Programmiersprache Java um die Möglichkeit erweitert, Programme zur Laufzeit und ohne die genannten Einschränkungen zu aktualisieren. Das vorgestellte Konzept kombiniert das schemaverändernde Nachladen von Klassen mit Referenzaktualisierungen auf der Basis von Java HotSwap, Containern und Proxies. Zentrale Beiträge der Arbeit sind detaillierte Beschreibungen der Konzepte und deren Implementierung, sowie der Nachweis der Praxvistauglichkeit der Lösung anhand verschiedener Fallstudien. Weiterhin wird untersucht, ob die präsentierte Lösung Einschränkungen bezüglich Flexibilität, Performanz, Plattform, Programmarchitektur oder Änderungsgranularität unterliegt.

System-oriented analysis of the dynamic behaviour of direct methanol fuel cells

DMFC, dynamic behaviour, current steps, system analysis, methanol oxidation, flow field design

Static and dynamic interpretations of hand specific body language cues for HCI

Otto-von-Guericke-Universität Magdeburg, Fakultät für Elektrotechnik und Informationstechnik, Univ., Dissertation, 2015