A dual inverter based supercapacitor direct integration scheme for wind energy conversion systems

This paper presents a new direct integration scheme for supercapacitors that are used to mitigate short term power fluctuations in wind power systems. The proposed scheme uses the popular dual inverter topology for grid connection as well as interfacing a supercapacitor bank. The dual inverter system is formed by cascading two 2-level inverters named as the “main inverter” and the “auxiliary inverter”. The main inverter is powered by the rectified output of a wind turbine coupled permanent magnet synchronous generator. The auxiliary inverter is directly connected to a super capacitor bank. This approach eliminates the need for an interfacing dc-dc converter for the supercapacitor bank and thus improves the overall efficiency. A detailed analysis on the effects of non-integer dynamically changing voltage ratio is presented. The concept of integrated boost rectifier is used to carry out the Maximum Power Point Tracking (MPPT) of the wind turbine generator. Another novel feature of this paper is the power reference adjuster which effectively manages capacitor charging and discharging at extreme conditions. Simulation results are presented to verify the efficacy of the proposed system in suppressing short term wind power fluctuations.

Submission: Towards a Stronger and More Efficient IP Rights System : Getting the Balance Right

1. In March 2009, the Australian Government, through IP Australia its administrator of Intellectual Property Rights (IPR) acquired by registration or grant, issued two consultation papers for comment by interested stakeholders. 2. The Consultation Papers have invited written submissions directed towards the object of the paper, namely encouraging discussion on certain proposed changes and their impact on business and innovation. 3. I understand the invitation to make written submissions is predominantly in the areas raised by the Consultation Papers and the questions posed. However, I have made a brief reference to several other areas of concern with the current Australian patent law, which in my opinion inhibit innovation and therefore come under the wider agenda of the government to work toward a stronger and more efficient IP rights system. 4. In this regard, the Consultation Papers indicate that if the IPR are less likely to be invalidated and more likely to be enforced, this confidence will reflect in a greater investment in research leading to innovation. 5. This submission relates to the Balance Paper.

A Submission to the Advisory Council on Intellectual Property in Relation to the Issues Paper Relating to the Enforcement of Trade Marks - February 2002

With respect to “shape” marks, there would appear to be a “break”, imposed by the Australian Courts, in the logical conclusion that registration of a shape, which performs a functional purpose, or even further, is indistinguishable from the shape of the item or product, creates a perpetual monopoly in the manufacture of that product.

Submission to the Legal Affairs and Community Safety Committee Youth Justice and Other Legislation Amendment Bill

This submission addresses the Youth Justice and Other Legislation Amendment Bill 2014 the objectives of which are to: 1. Permit repeat offenders’ identifying information to be published and open the Children’s Court for youth justice matters involving repeat offenders; 2. Create a new offence where a child commits a further offence while on bail; 3. Permit childhood findings of guilt for which no conviction was recorded to be admissible in court when sentencing a person for an adult offence; 4. Provide for the automatic transfer from detention to adult corrective services facilities of 17 year olds who have six months or more left to serve in detention; 5. Provide that, in sentencing any adult or child for an offence punishable by imprisonment, the court must not have regard to any principle, whether under statute or at law, that a sentence of imprisonment (in the case of an adult) or detention (in the case of a child) should only be imposed as a last resort; 6. Allow children who have absconded from Sentenced Youth Boot Camps to be arrested and brought before a court for resentencing without first being given a warning; and 7. Make a technical amendment to the Youth Justice Act 1992.

Design and experimental testing of air slab caps which convert commercial electron diodes into dual purpose, correction-free diodes for small field dosimetry

Purpose Two diodes which do not require correction factors for small field relative output measurements are designed and validated using experimental methodology. This was achieved by adding an air layer above the active volume of the diode detectors, which canceled out the increase in response of the diodes in small fields relative to standard field sizes. Methods Due to the increased density of silicon and other components within a diode, additional electrons are created. In very small fields, a very small air gap acts as an effective filter of electrons with a high angle of incidence. The aim was to design a diode that balanced these perturbations to give a response similar to a water-only geometry. Three thicknesses of air were placed at the proximal end of a PTW 60017 electron diode (PTWe) using an adjustable “air cap”. A set of output ratios (ORfclin Det ) for square field sizes of side length down to 5 mm was measured using each air thickness and compared to ORfclin Det measured using an IBA stereotactic field diode (SFD). k fclin, f msr Qclin,Qmsr was transferred from the SFD to the PTWe diode and plotted as a function of air gap thickness for each field size. This enabled the optimal air gap thickness to be obtained by observing which thickness of air was required such that k fclin, f msr Qclin,Qmsr was equal to 1.00 at all field sizes. A similar procedure was used to find the optimal air thickness required to make a modified Sun Nuclear EDGE detector (EDGEe) which s “correction-free” in small field relative dosimetry. In addition, the feasibility of experimentally transferring k fclin, f msr Qclin,Qmsr values from the SFD to unknown diodes was tested by comparing the experimentally transferred k fclin, f msr Qclin,Qmsr values for unmodified PTWe and EDGEe diodes to Monte Carlo simulated values. Results 1.0 mm of air was required to make the PTWe diode correction-free. This modified diode (PTWeair) produced output factors equivalent to those in water at all field sizes (5–50 mm). The optimal air thickness required for the EDGEe diode was found to be 0.6 mm. The modified diode (EDGEeair) produced output factors equivalent to those in water, except at field sizes of 8 and 10 mm where it measured approximately 2% greater than the relative dose to water. The experimentally calculated k fclin, f msr Qclin,Qmsr for both the PTWe and the EDGEe diodes (without air) matched Monte Carlo simulated results, thus proving that it is feasible to transfer k fclin, f msr Qclin,Qmsr from one commercially available detector to another using experimental methods and the recommended experimental setup. Conclusions It is possible to create a diode which does not require corrections for small field output factor measurements. This has been performed and verified experimentally. The ability of a detector to be “correction-free” depends strongly on its design and composition. A nonwater-equivalent detector can only be “correction-free” if competing perturbations of the beam cancel out at all field sizes. This should not be confused with true water equivalency of a detector.

Submission to the Australian Government’s Online Copyright Infringement Discussion Paper

Now is not the time to increase the strength of copyright law. Copyright law is facing a crisis of legitimacy: consumers increasingly appear to doubt its moral weight. To a large extent, this can be traced to the fact that Australian consumers do not believe they are being treated fairly by (predominantly US-based) copyright producers and distributors. Compared to their overseas peers, Australian consumers pay much more for access to books, films, television, and computer games, and are often subjected to long delays before material is available in Australia. Our research shows that this perceived unfairness increases the willingness of Australian consumers to seek out alternative distribution channels. Put simply, the failure of content distributors to meet consumer demand in Australia is a leading factor in copyright infringement. This submission argues that the best strategy to reduce copyright infringement in Australia, at the present time, is for distributors to focus on providing timely, affordable, convenient and fair access to copyright goods. Until this is done, the prevalence of copyright infringement in Australia should be seen as essentially a market problem, rather than a legal one. The Australian Government, meanwhile, should address the recommendations of the IT Pricing Report as a matter a priority. As a first step, the Government should urgently consider repealing the IP exception to competition law in s 51(3), as recommended by the Ergas committee, the IT Pricing report, and the ALRC. This change alone may go a long way to enhancing the efficiency of the copyright market in Australia.

Creative Commons Australia and Organization for Transformative Works submission to the Australian Government’s online copyright infringement discussion paper

This submission focuses on the adverse effects that the Government’s proposals are likely to have on the legitimate use of copyright works. Copyright exists to support the production of new expression. Because new expression always builds on existing culture, any extension of copyright protection necessarily also increases the costs of creative expression. As a threshold matter, we do not believe that these further increases to the force of copyright law are justified. In recent years, the balance at the heart of copyright law has tipped too far in the direction of established producers and distributors, and now imposes unnecessary costs on ordinary creators. The available evidence does not support a further increase in the penalties and enforcement mechanisms available under copyright law.

A switching control strategy for single and dual inductor push-pull converters

A switching control strategy is proposed for single and dual inductor current-fed push-pull converters. The proposed switching control strategy can be used with both current-fed push-pull converters with an active voltage doubler rectifier, or active rectifier, in the secondary side of the isolation transformer. The proposed switching control strategy makes turn-on and turn-off processes of the primary side power switches zero-voltage-switching and zero-current-switching respectively. The soft-switching operation of the single and dual inductor push-pull converters, with both types of active rectifier, is explained. Simulation and experimental results are provided to validate soft switching operation of the current-fed push-pull converters with the proposed switching control strategy.

Inquiry into Suicide in Australia (Submission)

This submission is informed by an ongoing Australian Research Council (ARC) Discovery Project: “Safeguarding Rural Australia: Addressing Masculinity and Violence in Rural Settings”. Due to project status, presentation of emergent findings, although relevant to this inquiry, would be premature and could jeopardise extant reporting and publishing obligations. Accordingly, our comments are restricted and are essentially with respect to Terms of Reference (c) dealing with the accuracy of suicide reporting in Australia.

Submission to the Attorney-General's Department consultation on "Marrakesh Treaty options for implementation" discussion paper

It is extremely important to ensure that people with disabilities can access information and cultural works on an equal basis with others. Access is fundamentally important to enable people with disabilities to fully participate in economic, social, and political life. This is both a pressing moral imperative and a legal requirement in international law. Australia should take clear steps to affirmatively redress the fundamental inequalities of access that people with disabilities face. This requires a fundamental shift in the way that we think about copyright and disability rights: the mechanisms for enabling access should not be a limited exception to normal distribution, but should instead be strong positive rights that are able to be routinely and practically exercised.

A biomechanical investigation of dual growing rods used for fusionless scoliosis correction

Background The use of dual growing rods is a fusionless surgical approach to the treatment of early onset scoliosis (EOS), which aims of harness potential growth in order to correct spinal deformity. The purpose of this study was to compare the in-vitro biomechanical response of two different dual rod designs under axial rotation loading. Methods Six porcine spines were dissected into seven level thoracolumbar multi-segmental units. Each specimen was mounted and tested in a biaxial Instron machine, undergoing nondestructive left/right axial rotation to peak moments of 4Nm at a constant rotation rate of 8deg.s-1. A motion tracking system (Optotrak) measured 3D displacements of individual vertebrae. Each spine was tested in an un-instrumented state first and then with appropriately sized semi-constrained growing rods and ‘rigid’ rods in alternating sequence. Range of motion, neutral zone size and stiffness were calculated from the moment-rotation curves and intervertebral ranges of motion were calculated from Optotrak data. Findings Irrespective of test sequence, rigid rods showed significantly reduction of total rotation across all instrumented levels (with increased stiffness) whilst semi-constrained rods exhibited similar rotation behavior to the un-instrumented (P<0.05). An 11% and 8% increase in stiffness for left and right axial rotation respectively and 15% reduction in total range of motion was recorded with dual rigid rods compared with semi-constrained rods. Interpretation Based on these findings, the semi-constrained growing rods do not increase axial rotation stiffness compared with un-instrumented spines. This is thought to provide a more physiological environment for the growing spine compared to dual rigid rod constructs.

Modeling and control of a CLC resonant dual active bridge

This paper proposes a linear large signal state-space model for a phase controlled CLC (Capacitor Inductor Capacitor) Resonant Dual Active Bridge (RDAB). The proposed model is useful for fast simulation and for the estimation of state variables under large signal variation. The model is also useful for control design because the slow changing dynamics of the dq variables are relatively easy to control. Simulation results of the proposed model are presented and compared to the simulated circuit model to demonstrate the proposed model's accuracy. This proposed model was used for the design of a Proportional-Integral (PI) controller and it has been implemented in the circuit simulation to show the proposed models usefulness in control design.