Practical guidelines for planning and implementing fauna translocations

A successful translocation involves many complex factors, including a genetically appropriate source population that can sustain harvest, social and governmental support, assessment of disease transmission risk and a release site with appropriately secure habitat that can support population establishment and persistance. This information is typically discussed during staturory approval processes and can take considerable time. However, following approval, for translocations of most fauna, the initial critical step involves the inherently stressful process of capture, holding, transportation and release. This process is unpredictable and novel, and is especially challenging for wild animals when they are confined in close proximity to conspecifics and humans. In contrast, captive-reared animals have to cope with the unfamiliar challenges of finding food and shelter, along with coping with competition and predation. Little has been written in the scientific literature about the translocation process. This is unsurprising because this process has usually been the realm of skilled practioners, often with animal husbandry backgrounds, rather than research scientists. Highly skilled intuition, observation and the translocation practioner's equivalent of a 'green thumb' often guides the way. However, theory and experimentation, particularly on the effects of stress, is available and this work is invaluable for a successful translocation. Here, we provide a brief description of the translocation process, and discussion of what stress is and how it can be managed. We then provide practical guidelines for the successful translocation of invertebrates, lizards, turtles, passerine birds, marsupials and bats, using examples from Australia and New Zealand.

A suitable method for journal bearing wear measurement

Purpose – Ideally, there is no wear in hydrodynamic lubrication regime. A small amount of wear occurs during start and stop of the machines and the amount of wear is so small that it is difficult to measure with accuracy. Various wear measuring techniques have been used where out-of-roundness was found to be the most reliable method of measuring small wear quantities in journal bearings. This technique was further developed to achieve higher accuracy in measuring small wear quantities. The method proved to be reliable as well as inexpensive. The paper aims to discuss these issues. Design/methodology/approach – In an experimental study, the effect of antiwear additives was studied on journal bearings lubricated with oil containing solid contaminants. The test duration was too long and the wear quantities achieved were too small. To minimise the test duration, short tests of about 90 min duration were conducted and wear was measured recording changes in variety of parameters related to weight, geometry and wear debris. The out-of-roundness was found to be the most effective method. This method was further refined by enlarging the out-of-roundness traces on a photocopier. The method was proved to be reliable and inexpensive. Findings – Study revealed that the most commonly used wear measurement techniques such as weight loss, roughness changes and change in particle count were not adequate for measuring small wear quantities in journal bearings. Out-of-roundness method with some refinements was found to be one of the most reliable methods for measuring small wear quantities in journal bearings working in hydrodynamic lubrication regime. By enlarging the out-of-roundness traces and determining the worn area of the bearing cross-section, weight loss in bearings was calculated, which was repeatable and reliable. Research limitations/implications – This research is a basic in nature where a rudimentary solution has been developed for measuring small wear quantities in rotary devices such as journal bearings. The method requires enlarging traces on a photocopier and determining the shape of the worn area on an out-of-roundness trace on a transparency, which is a simple but a crude method. This may require an automated procedure to determine the weight loss from the out-of-roundness traces directly. This method can be very useful in reducing test duration and measuring wear quantities with higher precision in situations where wear quantities are very small. Practical implications – This research provides a reliable method of measuring wear of circular geometry. The Talyrond equipment used for measuring the change in out-of-roundness due to wear of bearings indicates that this equipment has high potential to be used as a wear measuring device also. Measurement of weight loss from the traces is an enhanced capability of this equipment and this research may lead to the development of a modified version of Talyrond type of equipment for wear measurements in circular machine components. Originality/value – Wear measurement in hydrodynamic bearings requires long duration tests to achieve adequate wear quantities. Out-of-roundness is one of the geometrical parameters that changes with progression of wear in a circular shape components. Thus, out-of-roundness is found to be an effective wear measuring parameter that relates to change in geometry. Method of increasing the sensitivity and enlargement of out-of-roundness traces is original work through which area of worn cross-section can be determined and weight loss can be derived for materials of known density with higher precision.

Localization of type 1 diabetes susceptibility to the MHC class I genes HLA-B and HLA-A

The major histocompatibility complex (MHC) on chromosome 6 is associated with susceptibility to more common diseases than any other region of the human genome, including almost all disorders classified as autoimmune. In type 1 diabetes the major genetic susceptibility determinants have been mapped to the MHC class II genes HLA-DQB1 and HLA-DRB1 (refs 1–3), but these genes cannot completely explain the association between type 1 diabetes and the MHC region4, 5, 6, 7, 8, 9, 10, 11. Owing to the region's extreme gene density, the multiplicity of disease-associated alleles, strong associations between alleles, limited genotyping capability, and inadequate statistical approaches and sample sizes, which, and how many, loci within the MHC determine susceptibility remains unclear. Here, in several large type 1 diabetes data sets, we analyse a combined total of 1,729 polymorphisms, and apply statistical methods—recursive partitioning and regression...

Constructing a traditional Chinese medicine data warehouse application

The explosive growth in the development of Traditional Chinese Medicine (TCM) has resulted in the continued increase in clinical and research data. The lack of standardised terminology, flaws in data quality planning and management of TCM informatics are preventing clinical decision-making, drug discovery and education. This paper argues that the introduction of data warehousing technologies to enhance the effectiveness and durability in TCM is paramount. To showcase the role of data warehousing in the improvement of TCM, this paper presents a practical model for data warehousing with detailed explanation, which is based on the structured electronic records, for TCM clinical researches and medical knowledge discovery.

Biophilic urbanism: Contributions to holistic urban greening for urban renewal

Purpose – The purpose of this paper is to consider how biophilic urbanism complements and potentially enhances approaches for the built environment profession to holistically integrate nature into cities. Urban nature – also referred to as urban greening and green infrastructure – has increasingly been considered from many perspectives to address challenges such as population pressures, climate change and resource shortages. Within this context, the authors highlight how “biophilic urbanism” complements and may enhance approaches and efforts for urban greening. Design/methodology/approach – The paper provides a review of existing literature in “urban nature” to clarify and discuss the concept of biophilic urbanism. Drawing on this literature review, the authors present a systematic clustering and scaling of “biophilic elements” that could facilitate responding to twenty-first century challenges. Findings – Biophilic urbanism can be applied at multiple scales in urban environments, through a range of multi-functional features that address the pervasive false dichotomy of urban development and environmental protection. Biophilic urbanism can complement urban greening efforts to enable a holistic approach, which is conducive to comprehensive, intentional and strategic urban greening. Originality/value – This paper situates the emerging concept of biophilic urbanism within existing research from multiple disciplines, providing insight for how this can be applied in practice, particularly to the topical challenge of “urban renewal”.

A large-scale analysis of genetic variants within putative miRNA binding sites in prostate cancer

Prostate cancer is the second most common malignancy among men worldwide. Genome-wide association studies have identified 100 risk variants for prostate cancer, which can explain approximately 33% of the familial risk of the disease. We hypothesized that a comprehensive analysis of genetic variations found within the 3' untranslated region of genes predicted to affect miRNA binding (miRSNP) can identify additional prostate cancer risk variants. We investigated the association between 2,169 miRSNPs and prostate cancer risk in a large-scale analysis of 22,301 cases and 22,320 controls of European ancestry from 23 participating studies. Twenty-two miRSNPs were associated (P<2.3×10(-5)) with risk of prostate cancer, 10 of which were within 7 genes previously not mapped by GWAS studies. Further, using miRNA mimics and reporter gene assays, we showed that miR-3162-5p has specific affinity for the KLK3 rs1058205 miRSNP T-allele, whereas miR-370 has greater affinity for the VAMP8 rs1010 miRSNP A-allele, validating their functional role. SIGNIFICANCE Findings from this large association study suggest that a focus on miRSNPs, including functional evaluation, can identify candidate risk loci below currently accepted statistical levels of genome-wide significance. Studies of miRNAs and their interactions with SNPs could provide further insights into the mechanisms of prostate cancer risk.

Regional Differences in the Influence of Irrigation on Climate

A global climate model experiment is performed to evaluate the effect of irrigation on temperatures in several major irrigated regions of the world. The Community Atmosphere Model, version 3.3, was modified to represent irrigation for the fraction of each grid cell equipped for irrigation according to datasets from the Food and Agriculture Organization. Results indicate substantial regional differences in the magnitude of irrigation-induced cooling, which are attributed to three primary factors: differences in extent of the irrigated area, differences in the simulated soil moisture for the control simulation (without irrigation), and the nature of cloud response to irrigation. The last factor appeared especially important for the dry season in India, although further analysis with other models and observations are needed to verify this feedback. Comparison with observed temperatures revealed substantially lower biases in several regions for the simulation with irrigation than for the control, suggesting that the lack of irrigation may be an important component of temperature bias in this model or that irrigation compensates for other biases. The results of this study should help to translate the results from past regional efforts, which have largely focused on the United States, to regions in the developing world that in many cases continue to experience significant expansion of irrigated land.

Jumping the Gun

Jumping the Gun is a play written for secondary school audiences. It follows the lives of three senior school students as they navigate moral, ethical and personal choices during the final year of school.

Understanding the civic impact of journalism

The importance of journalism to civil society is constantly proclaimed, but empirical evidence on journalism's impact, and how this operates, is surprisingly thin. Indeed, there is confusion even about what is meant by the term “impact”. Meanwhile, the issue of the role of journalism is becoming increasingly urgent as a consequence of the rapid changes engulfing the news media, brought about by technological change and the flow-on effect to the traditional advertising-supported business model. Assessing the impact of journalism has recently been the topic of debate among practitioners and scholars particularly in the United States, where philanthropists have responded to the perceived crisis in investigative journalism by funding not-for-profit newsrooms, with resulting new pressures being placed on journalists and editors to quantify their impact on society. These recent attempts have so far failed to achieve clarity or a satisfactory conclusion, which is not surprising given the complex web of causation within which journalism operates. In this paper, the authors propose a stratified definition of journalistic impact and function. They propose a methodology for studying impact drawing on realistic evaluation—a theory-based approach developed primarily to assess large social programmes occurring in open systems. The authors argue this could allow a conceptual and methodological advance on the question of media impacts, leading to research capable of usefully informing responses at a time of worrying change.

The effects of height and BMI on prostate cancer incidence and mortality: A Mendelian randomization study in 20,848 cases and 20,214 controls from the PRACTICAL consortium

Background Epidemiological studies suggest a potential role for obesity and determinants of adult stature in prostate cancer risk and mortality, but the relationships described in the literature are complex. To address uncertainty over the causal nature of previous observational findings, we investigated associations of height- and adiposity-related genetic variants with prostate cancer risk and mortality. Methods We conducted a case–control study based on 20,848 prostate cancers and 20,214 controls of European ancestry from 22 studies in the PRACTICAL consortium. We constructed genetic risk scores that summed each man’s number of height and BMI increasing alleles across multiple single nucleotide polymorphisms robustly associated with each phenotype from published genome-wide association studies. Results The genetic risk scores explained 6.31 and 1.46 % of the variability in height and BMI, respectively. There was only weak evidence that genetic variants previously associated with increased BMI were associated with a lower prostate cancer risk (odds ratio per standard deviation increase in BMI genetic score 0.98; 95 % CI 0.96, 1.00; p = 0.07). Genetic variants associated with increased height were not associated with prostate cancer incidence (OR 0.99; 95 % CI 0.97, 1.01; p = 0.23), but were associated with an increase (OR 1.13; 95 % CI 1.08, 1.20) in prostate cancer mortality among low-grade disease (p heterogeneity, low vs. high grade <0.001). Genetic variants associated with increased BMI were associated with an increase (OR 1.08; 95 % CI 1.03, 1.14) in all-cause mortality among men with low-grade disease (p heterogeneity = 0.03). Conclusions We found little evidence of a substantial effect of genetically elevated height or BMI on prostate cancer risk, suggesting that previously reported observational associations may reflect common environmental determinants of height or BMI and prostate cancer risk. Genetically elevated height and BMI were associated with increased mortality (prostate cancer-specific and all-cause, respectively) in men with low-grade disease, a potentially informative but novel finding that requires replication.

Kansalaistoimintaa internet-ajalla : tapaustutkimus Porkkanamafian alkuvaiheista Suomessa

Tutkimus käsittelee Porkkanamafiaksi nimetyn kansalaisliikehdinnän alkuvaiheita ja organisoitumista Suomessa. Toimintaryhmä sai alkunsa Suomessa loppukesällä vuonna 2008, jolloin idea uudenlaisesta toimintamallista levisi sosiaalisen median kautta Yhdysvalloista. Uudenlaista kuluttaja-aktiivisuutta korostanut toiminta-ajatus konkretisoitui varsin nopeasti tempaukseksi, johon osallistui satoja ihmisiä. Organisoimisessa on hyödynnetty internetin sovelluksia tehokkaasti, mikä on vaikuttanut Porkkanamafian toiminnan luonteeseen ja nopeaan leviämiseen. Tapaustutkimus Porkkanamafiasta keskittyy tarkastelemaan kansalaistoiminnan syntyprosesseja ja sijoittuu yhteiskunnallisten liikkeiden tutkimuksen kenttään. Lähtökohtana tutkimuksessa on prosessin empiirinen kuvaus. Toiminnan alkuvaiheen organisoitumista, idean kehittymistä konkreettiseksi toiminnaksi ja ihmisten rekrytoitumista mukaan toimintaan kuvataan Doug McAdamin liikehdinnän syntyä käsittelevän mallin pohjalta. Mallia on tarpeen myös täydentää ottamalla huomioon internetin ja sosiaalisen median vaikutukset. Porkkanamafian toiminnan piirteiden ja syntyprosessien tarkastelu avaa näkökulman siihen, miten kansalaistoiminta toteutuu Suomessa internet-ajalla. Tutkimusta varten olen haastatellut seitsemää Helsingin Porkkanamafian toimijaa sekä kerännyt aineistoa osallistuvan havainnoinnin avulla. Haastattelumateriaalin ja kenttähavaintojen lisäksi olen hyödyntänyt aineistona toimintaa käsitteleviä verkkosivustoja ja-julkaisuja. Tutkimuksen mukaan Porkkanamafian toiminta sijoittuu niin kutsutun perinteisen kansalaistoiminnan ja uudenlaisen verkkoaktivismin välimaastoon. Internet ja erityisesti sosiaalinen media ovat keskeisiä areenoita toiminnan organisoimiseen ja kannattajien mobilisoimiseen. Toiminnan onnistumisen kannalta olennaista on kuitenkin saada ihmiset mukaan tempauksiin, jotka edellyttävät fyysistä läsnäoloa. Porkkanamafian toiminta on internet-vahvisteista eli pääasiallinen toiminta-areena ei ole verkossa, vaikka organisoinnissa hyödynnetään monipuolisesti uutta tieto- ja viestintäteknologiaa. Tutkimus osoittaa, että internetillä ja sen erilaisilla sovelluksilla oli merkittävä asema Porkkanamafian toiminnan syntyvaiheessa. Niiden vaikutus oli keskeinen niin toimintaidean saapumisessa Suomeen, sen omaksumisessa toteutettavaksi kuin itse toiminnan leviämisessä ja organisoimisessa. Rekrytoitumis- ja mobilisaatioprosesseissa internet ja sosiaalisen median valmiit verkostot mahdollistavat ihmisten tavoittamisen nopeasti ilman kustannuksia. Nämä kanavat muokkaavat myös osallistumisen kulttuuria, sillä toimintaa koskevan tiedon levitessä verkossa innostus lähteä mukaan liikehdintään alkaa usein ennestään tuntemattomien henkilöiden kautta. Tukea oman toiminnan oikeellisuudesta saadaan läheisten ihmisten sijaan verkkoyhteisöjen massoilta. Porkkanamafian kaitaisessa epämuodollisessa kansalaistoiminnassa osallistuminen on mahdollista tapahtumakohtaisesti omien resurssien mukaan ja ilman pitkäaikaista sitoutumista. Osallistuminen ei myöskään vaadi yhteisen laaja-alaisen ideologian jakamista. Nämä nykyliikehdinnän piirteet mahdollistavat helpon osallistumisen ja madaltavat näin kynnystä lähteä mukaan toimintaan. Keskeistä yhteiskunnallisen liikehdinnän syntyprosessissa on uusi ja innovatiivinen toimintaidea, joka Porkkanamafialla on ollut niin kutsuttu käänteinen tai positiivinen boikotti eli yrittäjien kannustaminen ympäristön tilaa parantaviin toimenpiteisiin kuluttajien ostovoiman avulla.

What lies beneath: responding to forest development plans: a guide for First Nations

pdf contains 60 pages

Report on the pinniped and sea otter tagging workshop 18-19 January 1979 Seattle, Washington

The Marine Mammal Tagging Office has been created by consensus of the agencies responsible for marine mammal management and the scientific community dealing with marine mammal tagging and marking. The purpose of ths office is to facilitate the dissemination of information with regard to tagging, marking, tags, and marks; to determine the need for new and better materials for tags; and to stimulate research, development, and testing programs. The American Institute of Biological Sciences was requested to coordinate a workshop to determine the status of pinniped tagging both nationally and internationally. Approximately 30 scientists were invited to participate in the workshop which was held on 18-19 January 1979 at the Sand Point Laboratory of the National Marine Fisheries Service in Seattle, Washington. Topics included ranged from specific tagging programs to general considerations and similar problems encountered by researchers. Participants also participated in one of three working groups -- Sea Otters, Phocids, and Otariids --to address pertinent issues. These break-out sessions resulted in the general recommendations and specific considerations sections of this report. Abstract authors include: Alton Y. Roppel; Ken Pitcher; Burney J. Le Boeuf; Wybrand Hoek; Robert M. Warneke; Don B. Siniff; Doug P. DeMaster; Daniel J. Miller; Ian Stirling; Roger L. Gentry; Lanny H. Cornell; James E. Antrim; Edward D. Asper; Mark Keyes; R. Keith Farrell; Donald G. Calkins; Bob DeLong; T. A. Gornall; Tom Otten; and, Ancel M. Johnson (PDF contains 54 pages)

Application of Marine Protected Areas for Sustainable Production and Marine Biodiversity off Alaska

Fisheries managers have established many marine protected areas (MPA’s) in the Federal and state waters off Alaska to protect ecological structure and function, establish control sites for scientific research studies, conserve benthic habitat, protect vulnerable stocks, and protect cultural resources. Many MPA’s achieve multiple objectives. Over 40 named MPA’s, many of which include several sites, encompass virtually all Federal waters off Alaska and most of the state waters where commercial fisheries occur. All of the MPA’s include measures to prohibit a particular fishery or gear type (particularly bottom trawls) on a seasonal or year-round basis, and several MPA’s prohibit virtually all commercial fishing. Although the effectiveness of MPA’s is difficult to evaluate on an individual basis, as a group they are an important component of the management program for sustainable fisheries and conserving marine biodiversity off Alaska.

The 1996 U.S. Purse Seine Fishery for Tropical Tunas in the Central-Western Pacific Ocean

The U.S. tropical tuna purse seine fleet has fished the central-western Pacific Ocean under the South Pacific Tuna Treaty since 1988. The 1996 fishery was the poorest since the start ofthe Treaty. Fishing effort declined due to the financial collapse of a large fishing enterprise. Catches reached record lows for yellowfin tuna, Thunnus albacares, and skipjack tuna, Katsuwonus pelamis, and continued a declining trend that started in 1995. Catch rates also decreased to the lowest levels since 1991. Whether this declining trend in catch rates is due to reduced availability of fish caused by cyclic ocean environmental changes affecting vulnerability or to reduced abundance from excessive fishing pressure is not yet known and needs to be assessed.