A STUDY ABOUT PH CHEMICALLY MODIFIED ELECTRODES BASED ON AMINO-DERIVATIVES OF NAPHTHALENE

The electrochemical polymerization of amino-derivatives of naphthalene has been studied on the platinum wire electrodes. The effects of acidity of the modifying media and the potential scan rate on the cyclic voltammograms are verified. As potentiometric pH sensors, the electrodes prepared from 1-naphthylamine and 2,3-diaminonaphthalene showed performance characteristics superior to some other electrodes tested. The electrode modified with 1-naphthylamine in the optimum medium showed a nearly Nernstian response of 4.20-13.70 pH and a slope of -54.8 mV/pH, while the linear range of the electrode prepared by 2,3-diaminonaphthalene was 4.00-13.60 pH, with a slope of -52.4 mV/pH.

Isolation of fucoxanthin from the rhizoid of Laminaria japonica Aresch

Fucoxanthin was extracted from the intact rhizoid of Laminaria japonica Aresch with dimethyl sulfoxide (DMSO), and then recovered from the DMSO extract by partitioning into ethyl acetate and subsequent evaporation. Some isolation conditions such as solvent volume and extraction time were screened. The quantity and quality of the extracted fucoxanthin were determined by spectral analysis (absorption spectra and fluorescence emission spectra). The results indicated that: (1) the average total content of fucoxanthin was 122.1 mu g in 1 g of fresh L japonica rhizoid; (2) in comparison with the widely used organic solvent, acetone, DMSO was much more effective for the extraction of fucoxanthin; (3) both DMSO volume and extraction time influenced extraction efficiency such as the recovery rate and purity of fucoxanthin (1 g of fresh L. japonica rhizoid treated with 4 mL DMSO for 60 min, yielded > 88% of the total fucoxanthin with purity 0.63); (4) when (NH4)(2)SO4 concentration was in the range of 0.5- 1.0 mol/L, the pigments rapidly and entirely moved from DMSO into the ethyl acetate phase; (5) the ethyl acetate and DMSO were recycled using a rotary evaporator.

PRELIMINARY STUDIES ON CRYOPRESERVATION OF SYDNEY ROCK OYSTER (SACCOSTREA GLOMERATA) LARVAE

In this study several parameters critical to the success of cryopreserving Sydney rock oyster (Saccostrea glomerata) larvae were investigated. They were: (1) cryoprotectants (10% dimethyl sulfoxide and 10% propylene glycol). (2) freezing protocols (with or without the seeding step). (3) larval concentrations (1,000, 3,000, 5,000, 10,000, 30,000 individuals mL(-1)). and (4) larval ages (6, 12, 24, 48 and 96 h old). The survival rates were determined as percentages of postthaw larvae performing active movements for the 6 and 12 h larvae or active cilia movement for the 24, 48 and 96 h larvae. Analyses showed that the difference in survival rates between different age classses was significant in all the experiments conducted, with the maximum survival rate being achieved in the 24-h-old larvae the postthaw survival rates of larvae cryopreserved with 10% dimethyl sulfoxide (93.1 +/- 0.2%) were significantly higher (P < 0.001) that those with 10% propylene glycol (81.5 +/- 0.4%). Differences in postthaw survival rates between different concentrations (1,000 30,000 individuals mL(-1)) were not significant within each of the three larval age classes (6-, 12-, and 24-h-old ) used.

Effect of cryoprotectants on hatching rate of red seabream (Pagrus major) embryos

The objectives were to investigate the effect of cryoprotectants on the hatching rate of red seabream embryos. Heart-beat embryos were immersed in: five permeable cryoprotectants, dimethyl sulfoxide (DMSO), glycerol (Gly), methanol (MeOH), 1,2-propylene glycol (PG), and ethylene glycol (EG). in concentrations of 5-30% for 10, 30, or 60 min; and two non-permeable cryoprotectants: polyvinylpyrrolidone (PVP), and sucrose (in concentrations of 5-20% for 10 or 30 min). The embryos were then washed and incubated in filtered seawater until hatching occurred. The hatching rate of the embryos treated with permeable cryoprotectants decreased (P < 0.05) with increased concentration and duration of exposure. In addition, PG was the least toxic permeable cryoprotectant, followed by DMSO and EG, whereas Gly and MeOH were the most toxic. At a concentration of 15% and 30 min exposure, the hatching rate of the embryos immersed in PG was 93.3 +/- 7.0% (mean +/- S.D.), however. in DMSO. EG, Gly. and MeOH, it was 82.7 +/- 10.4, 22.0 +/- 5.7, 0.0 +/- 0.0, and 0.0 +/- 0.0%, respectively. Hatching rate of embryos treated with PVP decreased (P < 0.05) with the increase of concentration and exposure time, whereas for embryos treated with sucrose, there was no significant decrease in comparison with the control at the concentrations used. (C) 2008 Elsevier Inc. All rights reserved.

An efficient methodology for cryopreservation of spermatozoa of red seabream, Pagrus major, with 2-mL cryovials

The aim of this study was to optimize the cryopreservation protocols for the sperm of red seabream, Pagrus major. The 2-mL cryovials and programmable freezer were employed for cryopreservation. Six extenders, six cryoprotectants in various concentrations ranging from 6 to 20% (v/v), four cooling rates, and three thawing temperatures were evaluated by postthaw sperm motility and fertility. The ratio of sperm to egg for postthaw sperm fertilization trials was experimentally standardized and was optimal at 500:1. The best motility of postthaw sperm (79.4 +/- 4.7% to 88.6 +/- 8.0%), fertilization rates (89.6 +/- 2.9 to 95.6 +/- 1.9%), and hatching rates (85.3 +/- 5.1% to 91.4 +/- 4.3%) were achieved when Cortland extender, dimethyl sulfoxide (15, 18, and 20%) or ethylene glycol (9, 12%) as cryoprotectants, 20 C/min as the cooling rate, and 40 C as the thawing temperature were employed. Moreover, the results on embryonic development were not significantly different between cryopreserved sperm and fresh sperm during incubation process. In conclusion, these methods of cryopreservation of red seabream sperm are suitable for routine aquaculture application and preservation of genetic resources.

Mechanism of Shear Thickening in Reversibly Cross-linked Supramolecular Polymer Networks.

We report here the nonlinear rheological properties of metallo-supramolecular networks formed by the reversible cross-linking of semi-dilute unentangled solutions of poly(4-vinylpyridine) (PVP) in dimethyl sulfoxide (DMSO). The reversible cross-linkers are bis-Pd(II) or bis-Pt(II) complexes that coordinate to the pyridine functional groups on the PVP. Under steady shear, shear thickening is observed above a critical shear rate, and that critical shear rate is experimentally correlated with the lifetime of the metal-ligand bond. The onset and magnitude of the shear thickening depend on the amount of cross-linkers added. In contrast to the behavior observed in most transient networks, the time scale of network relaxation is found to increase during shear thickening. The primary mechanism of shear thickening is ascribed to the shear-induced transformation of intrachain cross-linking to interchain cross-linking, rather than nonlinear high tension along polymer chains that are stretched beyond the Gaussian range.

Stereoselective reductase-catalysed deoxygenation of sulfoxides in aerobic and anaerobic bacteria

Direct and indirect evidence, Of unexpected stereoselective reductase-catalysed deoxygenations of sulfoxides, was found. The deoxygenations proceeded simultaneously, with the expected dioxygenase-catalysed asymmetric sulfoxidation of sulfides, during some biotransformations with the aerobic bacterium Pseudomonas putida UV4. Stereoselective reductase-catalysed asymmetric deoxygenation of racemic alkylaryl, dialkyl and phenolic sulfoxides was observed, without evidence of the reverse sulfoxidation reaction, using anaerobic bacterial strains. A purified dimethyl sulfoxide reductase, obtained from the intact cells of the anaerobic bacterium Citrobacter braakii DMSO 11, yielded, from the corresponding racemates, enantiopure alkylaryl sulfoxide and thiosulfinate samples.

Isolation and characterisation of bacterial strains containing enantioselective DMSO reductase activity: application to the kinetic resolution of racemic sulfoxides

The kinetic resolution of racemic sulfoxides by dimethyl sulfoxide (DMSO) reductases was investigated with a range of microorganisms. Three bacterial isolates (provisionally identified as Citrobacter braakii, Klebsiella sp. and Serratia sp.) expressing DMSO reductase activity were isolated from environmental samples by anaerobic enrichment with DMSO as terminal electron acceptor. The organisms reduced a diverse range of racemic sulfoxides to yield either residual enantiomer depending upon the strain used. C. braakii DMSO-11 exhibited wide substrate specificity that included dialkyl, diaryl and alkylaryl sulfoxides, and was unique in its ability to reduce the thiosulfinate 1,4-dihydrobenzo-2, 3-dithian-2-oxide. DMSO reductase was purified from the periplasmic fraction of C. braakii DMSO-11 and was used to demonstrate unequivocally that the DMSO reductase was responsible for enantiospecific reductive resolution of racemic sulfoxides.

Enzyme-catalysed oxygenation and deoxygenation routes to chiral thiosulfinates

Enantioenriched thiosulfinates have been obtained by dioxygenase- and chloroperoxidase-catalysed oxidation of 1,2-disulfides and dimethyl sulfoxide reductase-catalysed deoxygenation.

Chiral thiouronium salts: synthesis, characterisation and application in NMR enantio-discrimination of chiral oxoanions

Chiral thioureas and functionalised chiral thiouronium salts were synthesised starting from the relatively cheap and easily available chiral amines: (S)-methylbenzylamine and rosin-derived (+)-dehydroabietylamine. The introduction of a delocalised positive charge to the thiourea functionality, by an alkylation reaction at the sulfur atom, enables dynamic rotameric processes: hindered rotations about the delocalised CN and CS bonds. Hence, four different rotamers/isomers may be recognised: syn-syn, syn-anti, anti-syn and anti-anti. Extensive H-1 and C-13 NMR studies have shown that in hydrogen-bond acceptor solvents, such as perdeuteriated dimethyl sulfoxide, the syn-syn conformation is preferable. On the other hand, when using non-polar solvents, such as CDCl3, the mixture of syn-syn and syn-anti isomers is detectable, with an excess of the latter. Apart from this, in the case of S-butyl-N,N'-bis(dehydroabietyl)thiouronium ethanoate in CDCl3, the H-1 NMR spectrum revealed that strong bifurcated hydrogen bonding between the anion and the cation causes global rigidity without signs of hindered rotamerism observable on the NMR time scale. This suggested that these new salts might be used as NMR discriminating agents for chiral oxoanions, and are indeed more effective than their archetypal guanidinium analogues or the neutral thioureas. The best results in recognition of a model substrate, mandelate, were obtained with S-butyl-N,N'-bis(dehydroabietyl) thiouronium bistriflamide. It was confirmed that the chiral recognition occurred not only for carboxylates but also for sulfonates and phosphonates. Further H-1 NMR studies confirmed a 1 : 1 recognition mode between the chiral agent (host) and the substrate (guest); binding constants were determined by H-1 NMR titrations in solutions of DMSO-d(6) in CDCl3. It was also found that the anion of the thiouronium salt had a significant influence on the recognition process: anions with poor hydrogen-bond acceptor abilities led to the best discrimination. The presence of host-guest hydrogen bonding was confirmed in the X-ray crystal structure of S-butyl-N,N'-bis(dehydroabietyl)thiouronium bromide and by computational studies (density functional theory).

Changed reactivity of the 1-bromo-4-nitrobenzene radical anion in a room temperature ionic liquid

Radical anions of 1-bromo-4-nitrobenzene (p-BrC6H4NO2) are shown to be reactive in the room temperature ionic liquid N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, ([C(4)mPyrr][NTf2]), by means of voltammetric measurements. In particular, they are shown to react via a DISP type mechanism such that the electrolysis of p-BrC6H4NO2 occurs consuming between one and two electrons per reactant molecule, leading to the formation of the nitrobenzene radical anion and bromide ions. This behaviour is a stark contrast to that in conventional non-aqueous solvents such as acetonitrile, dimethyl sulfoxide or N,N-dimethylformamide, which suggests that the ionic solvent promotes the reactivity of the radical anion, probably via stabilisation of the charged products.

Concomitant osmotic and chaotropicity-induced stresses in Aspergillus wentii: compatible solutes determine the biotic window

Whereas osmotic stress response induced by solutes has been well-characterized in fungi, less is known about the other activities of environmentally ubiquitous substances. The latest methodologies to define, identify and quantify chaotropicity, i.e. substance-induced destabilization of macromolecular systems, now enable new insights into microbial stress biology (Cray et al. in Curr Opin Biotechnol 33:228–259, 2015a, doi:10.​1016/​j.​copbio.​2015.​02.​010; Ball and Hallsworth in Phys Chem Chem Phys 17:8297–8305, 2015, doi:10.​1039/​C4CP04564E; Cray et al. in Environ Microbiol 15:287–296, 2013a, doi:10.​1111/​1462-2920.​12018). We used Aspergillus wentii, a paradigm for extreme solute-tolerant fungal xerophiles, alongside yeast cell and enzyme models (Saccharomyces cerevisiae and glucose-6-phosphate dehydrogenase) and an agar-gelation assay, to determine growth-rate inhibition, intracellular compatible solutes, cell turgor, inhibition of enzyme activity, substrate water activity, and stressor chaotropicity for 12 chemically diverse solutes. These stressors were found to be: (i) osmotically active (and typically macromolecule-stabilizing kosmotropes), including NaCl and sorbitol; (ii) weakly to moderately chaotropic and non-osmotic, these were ethanol, urea, ethylene glycol; (iii) highly chaotropic and osmotically active, i.e. NH4NO3, MgCl2, guanidine hydrochloride, and CaCl2; or (iv) inhibitory due primarily to low water activity, i.e. glycerol. At ≤0.974 water activity, Aspergillus cultured on osmotically active stressors accumulated low-M r polyols to ≥100 mg g dry weight−1. Lower-M r polyols (i.e. glycerol, erythritol and arabitol) were shown to be more effective for osmotic adjustment; for higher-M r polyols such as mannitol, and the disaccharide trehalose, water-activity values for saturated solutions are too high to be effective; i.e. 0.978 and 0.970 (25 ºC). The highly chaotropic, osmotically active substances exhibited a stressful level of chaotropicity at physiologically relevant concentrations (20.0–85.7 kJ kg−1). We hypothesized that the kosmotropicity of compatible solutes can neutralize chaotropicity, and tested this via in-vitro agar-gelation assays for the model chaotropes urea, NH4NO3, phenol and MgCl2. Of the kosmotropic compatible solutes, the most-effective protectants were trimethylamine oxide and betaine; but proline, dimethyl sulfoxide, sorbitol, and trehalose were also effective, depending on the chaotrope. Glycerol, by contrast (a chaotropic compatible solute used as a negative control) was relatively ineffective. The kosmotropic activity of compatible solutes is discussed as one mechanism by which these substances can mitigate the activities of chaotropic stressors in vivo. Collectively, these data demonstrate that some substances concomitantly induce chaotropicity-mediated and osmotic stresses, and that compatible solutes ultimately define the biotic window for fungal growth and metabolism. The findings have implications for the validity of ecophysiological classifications such as ‘halophile’ and ‘polyextremophile’; potential contamination of life-support systems used for space exploration; and control of mycotoxigenic fungi in the food-supply chain.

Novos métodos de síntese de 4-quinolonas e benzo[b]acridonas

As 4-quinolonas e as acridonas são duas importantes famílias de compostos heterocíclicos azotados naturais que apresentam uma variedade de importantes aplicações biológicas. As 4-quinolonas têm sido objecto de extensos estudos devido às suas potenciais aplicações como fortes agentes citotóxicos, antimitóticos e anti-plaquetários e como protectores cardiovasculares, mas o seu uso é principalmente como antibióticos de largo espectro. As acridonas são conhecidas por apresentarem importante actividade antiviral, antiparasitária, contra a leishmania e a malária, e anticancerígena. A variedade de importantes aplicações biológicas das 4-quinolonas e das acridonas e a contínua procura pela comunidade científica de novas substâncias com actividades biológicas atractivas destaca estes compostos como alvos interessantes para a preparação de novos derivados e/ou para o desenvolvimento de novos métodos de síntese destas duas famílias de compostos. No primeiro capítulo desta dissertação descreve-se a síntese dos compostos de partida que tiveram de ser previamente preparados para o desenvolvimento das novas rotas de síntese apresentadas nos capítulos seguintes. A 4-cloro-3- formilquinolina foi obtida através da reacção de Vilsmeier-Haack da 2’-aminoacetofenona enquanto que a 3-formilquinolin-4(1H)-ona foi facilmente preparada por hidrólise ácida da anterior. Foi necessário proteger o grupo amina da quinolin-4(1H)-ona para evitar reacções secundárias e foram descritas as reacções de protecção com o grupo metilo, etoxicarbonilo e ptoluenossulfonilo. Os 2,2-dióxidos de 1,3-di-hidrobenzo[c]tiofeno, necessários para o estudo das reacções de Diels-Alder, não se encontram disponíveis comercialmente e a sua síntese é também descrita. No segundo capítulo reporta-se uma nova e eficiente rota de síntese de (Z)- e (E)-3-estirilquinolin-4(1H)-onas a partir da reacção de Wittig da 4-cloro-3- formilquinolina e de 3-formilquinolin-4(1H)-onas com benzilidenotrifenilfosforanos. As (Z)-3-estirilquinolin-4(1H)-onas foram obtidas com elevada diastereoselectividade a partir da reacção das 3-formilquinolin- 4(1H)-onas N-protegidas enquanto que as (E)-3-estirilquinolin-4(1H)-onas foram preparadas através da reacção de Wittig da 4-cloro-3-formilquinolina seguida da hidrólise ácida das respectivas (Z)- e (E)-4-cloro-3-estirilquinolinas obtidas. Ambas as rotas sintéticas são eficientes, independentemente dos substituintes dos benzilidenotrifenilfosforanos. No terceiro capítulo, descreve-se um novo método de síntese de novas benzo[b]acridonas a partir da reacção de Diels-Alder de 3-formilquinolin-4(1H)- onas N-protegidas, que actuam como dienófilos, com dienos altamente reactivos, os orto-benzoquinodimetanos, preparados in situ através da extrusão térmica do dióxido de enxofre dos respectivos 2,2-dióxidos de 1,3-dihidrobenzo[ c]tiofeno. A reacção de cicloadição das 3-formilquinolin-4(1H)-onas N-protegidas com orto-benzoquinodimetanos origina as benzo[b]-1,6,6a,12atetra- hidroacridin-12(7H)-onas esperadas, que são o resultado da referida cicloadição seguida de desformilação in situ, e mostrou ser eficiente apenas quando o grupo amina está derivatizado com um grupo sacador de electrões. A desidrogenação destas benzo[b]-1,6,6a,12a-tetra-hidroacridin-12(7H)-onas em dimetilsulfóxido utilizando uma quantidade catalítica de iodo foi também descrita e originou como produto principal as benzo[b]acridin-12(7H)-onas N-desprotegidas. Todos os compostos novos sintetizados foram caracterizados por diversas técnicas analíticas, especialmente por estudos espectroscópicos de ressonância magnética nuclear (RMN), incluindo espectros de 1H e 13C, bidimensionais de correlação espectroscópica homonuclear e heteronuclear e de efeito nuclear de Overhauser (NOESY). Foram também efectuados, sempre que possível, espectros de massa (EM) e análises elementares ou espectros de massa de alta resolução (EMAR) para todos os compostos novos sintetizados. O tautomerismo da 3-formil- e 3-estirilquinolin-4(1H)-onas e as isomerizações (E) (Z) e rotacional das 3-estirilquinolin-4(1H)-onas e das 4-cloro-3-estirilquinolinas foram estudados através de ressonância magnética nuclear experimental (RMN 1H e 13C) e teórica [B3LYP/6-311++G(d,p)].

Calix[4]pirróis: síntese e aplicação como sensores de aniões

A presente dissertação descreve, essencialmente, o desenvolvimento de novos métodos de funcionalização de calix[4]pirróis. O uso desses calix[4]pirróis, bem como o de porfirinas e ftalocianinas, como sensores de aniões, incluindo a determinação das suas constantes de afinidade é igualmente discutido. Esta dissertação encontra-se dividida em três partes distintas. Na primeira é feita uma revisão bibliográfica acerca das metodologias de síntese dos calix[4]pirróis, bem como das suas características e aplicações. A segunda parte encontra-se subdividida em diversos pontos de acordo com o tipo de funcionalização realizada nos calix[4]pirróis. No primeiro ponto desta parte encontram-se discutidos a síntese e a caracterização do mesooctametilcalix[ 4]pirrol-2-carbaldeído e do 3-(meso-octametilcalix[4]pirrol-2- il)propenal bem como os resultados obtidos da funcionalização destes aldeídos por reacções de cicloadição 1,3-dipolar. Esses aldeídos foram usados para gerar iletos de azometino, os quais foram “apanhados” com diversos dipolarófilos, tais como o fumaronitrilo, o fumarato de dimetilo, a N-(4- metoxifenil)maleimida, a 1,4-benzoquinona e a 1,4-naftoquinona. Ambos os calixpirróis com grupo formilo deram origem a aductos de cicloadição 1,3- dipolar com rendimentos moderados ou bons, principalmente quando se utilizou fumaronitrilo, fumarato de dimetilo ou N-(4-metoxifenil)maleimida como dipolarófilos. Neste estudo verificou-se que quando as quinonas eram utilizadas como dipolarófilos apenas eram obtidos os cicloaductos do 3-(mesooctametilcalix[ 4]pirrol-2-il)propenal. No segundo ponto descrevem-se as reacções de condensação aldólica e de Knoevenagel do mesooctametilcalix[ 4]pirrol-2-carbaldeído e do 3-(meso-octametilcalix[4]pirrol-2- il)propenal. Verificou-se a ausência de resultados para as reacções de condensação aldólica mas resultados muito satisfatórios para as reacções de Knoevenagel. Foram utilizados como compostos metilénicos activados a indano-1,3-diona, o 1,3-bis(dicianometilideno)indeno, o malononitrilo, o cianoacetato de etilo, o malonato de dietilo e o ácido de Meldrum. No penúltimo ponto encontram-se discutidas as reacções dos dois aldeídos com aminas bem como a sua redução e posterior tentativa de funcionalização dos calixpirróis com grupo hidroxilo. Em ambas as tentativas os resultados foram pouco satisfatórios. No último ponto da segunda parte descrevem-se, pormenorizadamente, os métodos de síntese, purificação e caracterização estrutural dos diversos compostos sintetizados. Na terceira parte são descritos os testes dos novos calix[4]pirróis sintetizados e também de outros derivados tetrapirrólicos, nomeadamente porfirinas e ftalocianinas, com aniões. Os calix[4]pirróis sintetizados demonstraram capacidade de interagir com diferentes aniões, e a sua capacidade de interacção é dependente dos grupos funcionais introduzidos. Verificou-se que os compostos com grupos ciano conjugados com um anel pirrólico do macrociclo apresentam constantes de afinidade mais elevadas para os aniões. A concluir esta dissertação encontra-se uma revisão da literatura sobre a utilização de porfirinas como sensores de aniões. Apresentam-se também os resultados obtidos com duas porfirinas e uma ftalocianina em tal aplicação. As porfirinas testadas apresentam elevadas constantes de afinidade com os iões fluoreto e di-hidrogenofosfato. No caso da ftalocianina verificou-se que esta interage com vários aniões, bem como com metanol e sulfóxido dimetílico, originando soluções de cores muito diferentes.

Third order nonlinear optical studies in europium naphthalocyanine using degenerate four wave mixing and Z-scan

Third order nonlinear susceptibility χ(3) and second hyperpolarizability (γ) of a bis-naphthalocyanine viz. europium naphthalocyanines, Eu(Nc)2, were measured in dimethyl formamide solution using degenerate four wave mixing at 532 nm under nanosecond pulse excitation. Effective nonlinear absorption coefficient, βeff and imaginary part of nonlinear susceptibility, Im(χ(3)) were obtained using open aperture /Z-scan technique at the same wavelength. Optical limiting property of the sample was also investigated. The role of excited state absorption in deciding the nonlinear properties of this material is discussed.