Unpacking the perceived opportunity to misbehave: The influence of spatio-temporal and social dimensions on consumer misbehavior

Purpose This study aims to use opportunity as a theoretical lens to investigate how the spatio-temporal and social dimensions of the consumption environment create perceived opportunities for consumers to misbehave. Design/methodology/approach Drawing on routine activity theory and social impact theory, the authors use two experiments to demonstrate that spatio-temporal and social dimensions can explain consumer theft in retail settings. Findings Study 1 reveals mixed empirical support for the basic dimensions of routine activity theory, which posits that the opportunity to thieve is optimised when a motivated offender, suitable target and the absence of a capable formal guardian transpire in time and space. Extending the notion of guardianship, Study 2 tests social impact theory and shows that informal guardianship impacts the likelihood of theft under optimal routine activity conditions. Originality/value The study findings highlight important implications for academicians and retail managers: rather than focusing on the uncontrollable characteristics of thieving offenders, more controllable spatio-temporal and social factors of the retail environment can be actively monitored and manipulated to reduce perceived opportunities for consumer misbehaviour.

Variation in tracheid cross-sectional dimensions and wood viscoelasticity extent and control methods

Printing papers have been the main product of the Finnish paper industry. To improve properties and economy of printing papers, controlling of tracheid cross-sectional dimensions and wood viscoelasticity are examined in this study. Controlling is understood as any procedure which yields raw material classes with distinct properties and small internal variation. Tracheid cross-sectional dimensions, i.e., cell wall thickness and radial and tangential diameters can be controlled with methods such as sorting wood into pulpwood and sawmill chips, sorting of logs according to tree social status and fractionation of fibres. These control methods were analysed in this study with simulations, which were based on measured tracheid cross-sectional dimensions. A SilviScan device was used to measure the data set from five Norway spruce (Picea abies) and five Scots pine (Pinus sylvestris) trunks. The simulation results indicate that the sawmill chips and top pulpwood assortments have quite similar cross-sectional dimensions. Norway spruce and Scots pine are on average also relatively similar in their cross-sectional dimensions. The distributions of these species are somewhat different, but from a practical point of view, the differences are probably of minor importance. The controlling of tracheid cross-sectional dimensions can be done most efficiently with methods that can separate fibres into earlywood and latewood. Sorting of logs or partitioning of logs into juvenile and mature wood were markedly less efficient control methods than fractionation of fibres. Wood viscoelasticity affects energy consumption in mechanical pulping, and is thus an interesting control target when improving energy efficiency of the process. A literature study was made to evaluate the possibility of using viscoelasticity in controlling. The study indicates that there is considerable variation in viscoelastic properties within tree species, but unfortunately, the viscoelastic properties of important raw material lots such as top pulpwood or sawmill chips are not known. Viscoelastic properties of wood depend mainly on lignin, but also on microfibrillar angle, width of cellulose crystals and tracheid cross-sectional dimensions.

Standardization efforts: The relationship between knowledge dimensions, search processes and innovation outcomes

We explore how a standardization effort (i.e., when a firm pursues standards to further innovation) involves different search processes for knowledge and innovation outcomes. Using an inductive case study of Vanke, a leading Chinese property developer, we show how varying degrees of knowledge complexity and codification combine to produce a typology of four types of search process: active, integrative, decentralized and passive, resulting in four types of innovation outcome: modular, radical, incremental and architectural. We argue that when the standardization effort in a firm involves highly codified knowledge, incremental and architectural innovation outcomes are fostered, while modular and radical innovations are hindered. We discuss how standardization efforts can result in a second-order innovation capability, and conclude by calling for comparative research in other settings to understand how standardization efforts can be suited to different types of search process in different industry contexts.

Korteweg-de Vries equation for the propagation of fast ion-acoustic waves in multi-dimensions

Abstract is not available.

Theory of Non-linear Waves in Multi-dimensions: with Special Reference to Surface Water Waves

The surface water waves are "modal" waves in which the "physical space" (t, x, y, z) is the product of a propagation space (t, x, y) and a cross space, the z-axis in the vertical direction. We have derived a new set of equations for the long waves in shallow water in the propagation space. When the ratio of the amplitude of the disturbance to the depth of the water is small, these equations reduce to the equations derived by Whitham (1967) by the variational principle. Then we have derived a single equation in (t, x, y)-space which is a generalization of the fourth order Boussinesq equation for one-dimensional waves. In the neighbourhood of a wave froat, this equation reduces to the multidimensional generalization of the KdV equation derived by Shen & Keller (1973). We have also included a systematic discussion of the orders of the various non-dimensional parameters. This is followed by a presentation of a general theory of approximating a system of quasi-linear equations following one of the modes. When we apply this general method to the surface water wave equations in the propagation space, we get the Shen-Keller equation.

A note on fractal dimensions of biomedical waveforms

In this paper, we study performance of Katz method of computing fractal dimension of waveforms, and its estimation accuracy is compared with Higuchi's method. The study is performed on four synthetic parametric fractal waveforms for which true fractal dimensions can be calculated, and real sleep electroencephalogram. The dependence of Katz's fractal dimension on amplitude, frequency and sampling frequency of waveforms is noted. Even though the Higuchi's method has given more accurate estimation of fractal dimensions, the study suggests that the results of Katz's based fractal dimension analysis of biomedical waveforms have to be carefully interpreted.

Editorial: Dimensions of knowledge-based urban development

This issue marks the beginning of a new editorial cycle. In the seventh volume of the journal the editorial team will continue collating novel scientific and social developments in the broader field of ‘knowledge-based development’ to report to our readers. In this perspective, the first issue of the volume focuses on different dimensions of knowledge-based urban development. As Gabe et al. (2012, p.1179) indicate, “[i]t would be an understatement to suggest that knowledge plays a key role in today’s economy; for much of the developed world, it might be more accurate to assert that knowledge is today’s economy”. Thus, knowledge generation has been a priority for global city administrations, and there is a growing consensus amongst scholars, planners, politicians and industrialists in identifying knowledge-based urban development as a panacea to the burgeoning economic problems (Knight, 1995; Kunzmann, 2009; Yigitcanlar, 2010, 2011; Huggins and Strakova, 2012; Lönnqvist et al., 2014). Although, in the era of global knowledge economy, knowledge-based urban development is a critical factor for economic success (Pratt, 2000; Sheppard, 2002), it is not solely an economic policy. For many, knowledge-based urban development is a policy that targets building an urban setting to form perfect climates for business, people, and governance in an environmentally friendly atmosphere (Carrillo, 2006; Ergazakis et al., 2006; Angelidou et al., 2012). Each of these climates correspond to a dimension or domain of knowledge-based urban development – namely, economy, society, space, and governance (Carrillo et al., 2014). Each paper of this issue corresponds to at least one of these domains, or policy areas.

Depression, Anxiety, Psychiatric Comorbidity and Dimensions of Temperament and Personality

This study is part of the Mood Disorders Project conducted by the Department of Mental Health and Alcohol Research, National Public Health Institute, and consists of a general population survey sample and a major depressive disorder (MDD) patient cohort from Vantaa Depression Study (VDS). The general population survey study was conducted in 2003 in the cities of Espoo and Vantaa. The VDS is a collaborative depression research project between the Department of Mental Health and Alcohol Research of the National Public Health Institute and the Department of Psychiatry of the Peijas Medical Care District (PMCD) beginning in 1997. It is a prospective, naturalistic cohort study of 269 secondary-level care psychiatric out- and inpatients with a new episode of Diagnostic and Statistical Manual of Mental Disorders, 4th edition (DSM-IV) MDD. In the general population survey study, a total of 900 participants (300 from Espoo, 600 from Vantaa) aged 20 70 years were randomly drawn from the Population Register Centre in Finland. A self-report booklet, including the Eysenck Personality Inventory (EPI), the Temperament and Character Inventory Revised (TCI-R), the Beck Depression Inventory and the Beck Anxiety Inventory was mailed to all subjects. Altogether 441 participants responded (94 returned only the shortened version without TCI-R) and gave their informed consent. VDS involved screening all patients aged 20-60 years (n=806) in the PMCD for a possible new episode of DSM-IV MDD. 542 consenting patients were interviewed with a semi-structured interview (the WHO Schedules for Clinical Assessment in Neuropsychiatry, version 2.0). 269 patients with a current DSM-IV MDD were included in the study and further interviewed with semi-structured interviews to assess all other axis I and II psychiatric diagnoses. Exclusion criteria were DSM-IV bipolar I and II, schizoaffective disorder, schizophrenia or another psychosis, organic and substance-induced mood disorders. In the present study are included those 193 (139 females, 54 males) individuals who could be followed up at both 6 and 18 months, and their depression had remained unipolar. Personality was investigated with the EPI. Personality dimensions associated not only to the symptoms of depression, but also to the symptoms of anxiety among general population and in depressive patients, as well as to comorbid disorders in MDD patients, supporting the dimensional view of depression and anxiety. Among the general population High Harm Avoidance and low Self-Directedness associated moderately, whereas low extraversion and high neuroticism strongly with the depressive and anxiety symptoms. The personality dimensions, especially high Harm Avoidance, low Self-Directedness and high neuroticism were also somewhat predictive of self-reported use of health care services for psychiatric reasons, and lifetime mental disorder. Moreover, high Harm Avoidance associated with a family history of mental disorder. In depressive patients, neuroticism scores were found to decline markedly and extraversion scores to increase somewhat with recovery. The predictive value of the changes in symptoms of depression and anxiety in explaining follow-up neuroticism was about 1/3 of that of baseline neuroticism. In contrast to neuroticism, the scores of extraversion showed no dependence on the symptoms of anxiety, and the change in the symptoms of depression explained only 1/20 of the follow-up extraversion compared with baseline extraversion. No evidence was found of the scar effect during a one-year follow-up period. Finally, even after controlling for symptoms of both depression and anxiety, depressive patients had a somewhat higher level of neuroticism (odds ratio 1.11, p=0.001) and a slightly lower level of extraversion (odds ratio 0.92, p=0.003) than subjects in the general population. Among MDD patients, a positive dose-exposure relationship appeared to exist between neuroticism and prevalence and number of comorbid axis I and II disorders. A negative relationship existed between level of extraversion and prevalence of comorbid social phobia and cluster C personality disorders. Personality dimensions are associated with the symptoms of depression and anxiety. Futhermore these findings support the hypothesis that high neuroticism and somewhat low extraversion might be vulnerability factors for MDD, and that high neuroticism and low extraversion predispose to comorbid axis I and II disorders among patients with MDD.

A solution framework for scheduling a BPM with non-identical job dimensions

A Batch Processing Machine (BPM) is one which processes a number of jobs simultaneously as a batch with common beginning and ending times. Also, a BPM, once started cannot be interrupted in between (Pre-emption not allowed). This research is motivated by a BPM in steel casting industry. There are three main stages in any steel casting industry viz., pre-casting stage, casting stage and post-casting stage. A quick overview of the entire process, is shown in Figure 1. There are two BPMs : (1) Melting furnace in the pre-casting stage and (2) Heat Treatment Furnace (HTF) in the post casting stage of steel casting manufacturing process. This study focuses on scheduling the latter, namely HTF. Heat-treatment operation is one of the most important stages of steel casting industries. It determines the final properties that enable components to perform under demanding service conditions such as large mechanical load, high temperature and anti-corrosive processing. In general, different types of castings have to undergo more than one type of heat-treatment operations, where the total heat-treatment processing times change. To have a better control, castings are primarily classified into a number of job-families based on the alloy type such as low-alloy castings and high alloy castings. For technical reasons such as type of alloy, temperature level and the expected combination of heat-treatment operations, the castings from different families can not be processed together in the same batch.

Spherical means with centers on a hyperplane in even dimensions

Given a real-valued function on R-n we study the problem of recovering the function from its spherical means over spheres centered on a hyperplane. An old paper of Bukhgeim and Kardakov derived an inversion formula for the odd n case with great simplicity and economy. We apply their method to derive an inversion formula for the even n case. A feature of our inversion formula, for the even n case, is that it does not require the Fourier transform of the mean values or the use of the Hilbert transform, unlike the previously known inversion formulas for the even n case. Along the way, we extend the isometry identity of Bukhgeim and Kardakov for odd n, for solutions of the wave equation, to the even n case.