Aquisição, processamento e análise de dados de sísmica de alta resolução na plataforma continental norte do Rio Grande do Norte: Vale inciso do rio açu

On the modern Continental Shelf to the north of Rio Grande do Norte state (NE Brazil) is located a paleo-valley, submerged during the last glacial sea-level lowstand, that marks continuation of the most important river of this area (Açu River). Despite the high level of exploration activity of oil industry, there is few information about shallow stratigraphy. Aiming to fill this gap, situated on the Neogene, was worked a marine seismic investigation, the development of a processing flow for high resolution data seismic, and the recognition of the main feature morphology of the study area: the incised valley of the River Açu. The acquisition of shallow seismic data was undertaken in conjunction with the laboratory of Marine Geology/Geophysics and Environmental Monitoring - GGEMMA of Federal University of Rio Grande do Norte UFRN, in SISPLAT project, where the geomorphological structure of the Rio paleovale Açu was the target of the investigation survey. The acquisition of geophysical data has been over the longitudinal and transverse sections, which were subsequently submitted to the processing, hitherto little-used and / or few addressed in the literature, which provided a much higher quality result with the raw data. Once proposed for the flow data was developed and applied to the data of X-Star (acoustic sensor), using available resources of the program ReflexW 4.5 A surface fluvial architecture has been constructed from the bathymetric data and remote sensing image fused and draped over Digital Elevation Models to create three-dimensional (3D) perspective views that are used to analyze the 3D geometry geological features and provide the mapping morphologically defined. The results are expressed in the analysis of seismic sections that extend over the region of the continental shelf and upper slope from mouth of the Açu River to the shelf edge, providing the identification / quantification of geometrical features such as depth, thickness, horizons and units seismic stratigraphyc area, with emphasis has been placed on the palaeoenvironmental interpretation of discordance limit and fill sediment of the incised valley, control by structural elements, and marked by the influence of changes in the sea level. The interpretation of the evolution of this river is worth can bring information to enable more precise descriptions and interpretations, which describes the palaeoenvironmental controls influencing incised valley evolution and preservation to provide a better comprehensive understanding of this reservoir analog system

Sistemas de dunas do parque das Dunas e Barreiras do Inferno/Natal (RN: levantamento geológico /geofísico, elaboração do modelo deterministico e avaliação da vulnerabilidade/suscetibilidade

The current work was developed on the dune systems of the Parque das Dunas and Barreira do Inferno. These places are located in the cities of Natal and Parnamirim (RN, Brazil), respectively. This project has the purpose of developing the deterministic model on a specific blowout at Parque das Dunas, based in the geophysical interpretations of the lines gotten with the Ground Penetration Radar and the planialtimetric acquisitions of the topographical surface of the land. Also analyses of the vulnerability/susceptibility of these dune systems had been done in relation to the human pressures. To develop its deterministic model, it is necessary to acquire inner and outer geometries of the cited blowout. In order to depict inner geometries underneath the surface are used the GPR observing the altimetric control for topographical correction of the GPR lines. As for the outer geometries, the geodesic GPS gives us the planialtimetric points (x, y and z points) with milimetric precision, resulting in high-resolution surfaces. Using interpolation methods of the planialtimetric points was possible create Digital Elevations Models (DEM´s) of these surfaces. As a result, 1,161.4 meters of GPR lines were acquired on the blowout at the Parque das Dunas and 3,735.27 meters on the blowout at the Barreira do Inferno. These lines had been acquired with a 200 MHz antenna, except the 7 and 8 lines, for which we had been used a 100 MHz antenna. The gotten data had been processed and interpreted, being possible to identify boundary surfaces of first, second and third order. The first order boundary surface is related with the contact of the rocks of the Barreiras Group with the aeolian deposits. These deposits had been divided in two groups (Group 1 and Group 2) which are related with the geometry of stratum and the dip of its stratifications. Group 1 presented stratum of sigmoidal and irregular geometries and involved bodies where the reflectors had presented dips that had varied of 20 to the 28 degrees for the Parque das Dunas blowout and of 22 to the 29 degrees for the Barreira do Inferno blowout. Usually, it was limited in the base for the first order surface and in the top for the second order surface. Group 2 presented stratum of trough, wedge or lens geometries, limited in the base for the second order vi surface, where the corresponding deposits had more shown smoothed reflectors or with dips of low angle. The Deterministic and Digital Elevation Models had been developed from the integration and interpretation of the 2D data with the GOCAD® program. In Digital Elevations Models it was possible to see, for the localities, corridor or trough-shaped blowouts. In Deterministic Model it was possible to see first and second order boundary surfaces. For the vulnerability/susceptibility of the dune systems it was applied the methodology proposal by Boderè al (1991); however the same one did not show adequate because it evaluates actual coastal dunes. Actual coastal dunes are dunes that are presented in balance with the current environmental conditions. Therefore, a new methodology was proposal which characterizes the supplying and activity sedimentary, as well as the human pressures. For the methodology developed in this work, both the localities had presented a good management. The Parque das Dunas was characterized as a relic dune system and the Barreira do Inferno was characterized as a palimpsestic dune system. Also two Thematic Maps had been elaborated for the environmental characterization of the studied dune systems, with software ArcGis 8.3, and its respective data bases

Remote sensing analysis of depositional landforms in alluvial settings: Method development and application to the Taquari megafan, Pantanal (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Geração de modelos digitais de superfície por meio de plataformas computacionais com estrutura vetorial e raster

Geographic Information Systems (GIS) integrate the technologies related to Geoprocessing, with the ability to manipulate georeferenced information through data storage, management and analysis. One of the GIS applications is the generation of Digital Elevation Models (DEM) as a result of rebuilding the elevation of a region using computation tools and artificial representation. This paper presents the DEM created from a point base in two computational frameworks with different structures (vector and raster), comparing the contour lines generated from these models with the original contour lines from analog cartographic base. It was observed that one of the generated models presented some discrepancies related to real space for both GIS structures. However, using constrained Delaunay's triangulation in raster GIS a digital elevation model was generated with contour lines quite close to the original ones, with satisfactory results. A 3-D terrain representation was also created offering a very useful tool for analysis.

Análise da reconstrução 3D a partir de um par estereoscópico HR-CCD/CBERS-2 usando dois modelos matemáticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mudanças morfológicas na evolução do megaleque do Taquari: uma análise com base em dados orbitais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Geotecnologias na delimitação de áreas prioritárias à recomposição florestal na sub-bacia do Ribeirão Lavapés, Botucatu-SP

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Avaliação da exatidão cartográfica de dados SRTM e atualização da carta plani-altimétrica Salinópolis - NE do Pará

As informações topográficas existentes para o território brasileiro, na escala 1:100.000, cobrem apenas 75,39% da área nacional, restando ainda imensos vazios cartográficos, principalmente na região Amazônica. Essas informações eram oriundas de métodos de restituição aerofotogramétricas, aplicados em fotos aéreas das décadas de 60 a 80. Devido à grande complexidade dos métodos empregados e a outros problemas de ordem técnico-financeira, grande parte das cartas plani-altimétricas está desatualizada, fato que compromete a utilização das mesmas. Atualmente, as informações topográficas são largamente extraídas a partir de modelos digitais de elevação, como por exemplo, as imagens do Shuttle Radar Topography Mission (SRTM). Neste trabalho, o modelo de elevação do SRTM foi analisado com base no Padrão de Exatidão Cartográfica (PEC) altimétrico, na atualização altimétrica da carta Plani-altimétrica Salinópolis do ano de 1982. A análise do PEC altimétrico do SRTM referente à região de Salinópolis, revelou que o mesmo pode ser utilizado na escala 1:50.000 classe C e escala 1:100.000 classe A. Já que as imagens SRTM são compatíveis com a escala e classe da carta Salinópolis, utilizou-se a versão original do SRTM (90 metros resolução espacial) para atualização altimétrica da carta Salinópolis e imagens TM Landsat-5, como base planimétrica, seguindo os parâmetros adotados pelo Instituto Brasileiro de Geografia e Estatística. Com a atualização da carta constatou-se várias diferenças, principalmente em relação à planimetria. A atualização das cartas é de grande importância, principalmente em regiões costeiras, devido à dinâmica e intensidade dos diferentes processos naturais e antrópicos atuantes, além disso, esta metodologia pode servir de base para a atualização de outras cartas e até mesmo a geração de novas cartas em locais de vazios cartográficos, resolvendo assim a questão da falta de informação topográfica em determinadas escalas. Palavras-chave: SRTM, atualização cartográfica, carta plani-altimétrica, Amazônia.

Avaliação espaço-temporal da disponibilidade hídrica subterrânea do município de São José do Rio Preto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Geomorfologia e paleo-hidrologia dos megaleques dos rios Cuiabá e São Lourenço, quaternário da Bacia do Pantanal

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Geomorfometria da região de Fartura (SP)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Comparação de metodologias na definição de fluxos acumulados a partir de modelos digitais de elevação do terreno aplicado a suscetibilidade de inundações

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Classificação automatizada do relevo a partir de parâmetros morfométricos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ambientes de confluência no contexto da rede de drenagem: exemplo da bacia hidrográfica do rio Ivaí - estado do Paraná

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Classificação automatizada do relevo a partir de parâmetros morfométricos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)