A Computer Based Information System for County Equipment Cost Records, Final Report, HR-173, 1975

This appendix is divided into three sections. The first section contains abstracts of each of the eight computer programs in the system, instructions for keypunching the three input documents, and computer operating instructions pertaining to each program. The second section contains system flowcharts for the entire system as well as program flowcharts for each program. The last section contains PL/l program listings of each program.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa, Volume I: An Electronic Database for PIle LOad Tests (PILOT), TR-573, 2011

For well over 100 years, the Working Stress Design (WSD) approach has been the traditional basis for geotechnical design with regard to settlements or failure conditions. However, considerable effort has been put forth over the past couple of decades in relation to the adoption of the Load and Resistance Factor Design (LRFD) approach into geotechnical design. With the goal of producing engineered designs with consistent levels of reliability, the Federal Highway Administration (FHWA) issued a policy memorandum on June 28, 2000, requiring all new bridges initiated after October 1, 2007, to be designed according to the LRFD approach. Likewise, regionally calibrated LRFD resistance factors were permitted by the American Association of State Highway and Transportation Officials (AASHTO) to improve the economy of bridge foundation elements. Thus, projects TR-573, TR-583 and TR-584 were undertaken by a research team at Iowa State University’s Bridge Engineering Center with the goal of developing resistance factors for pile design using available pile static load test data. To accomplish this goal, the available data were first analyzed for reliability and then placed in a newly designed relational database management system termed PIle LOad Tests (PILOT), to which this first volume of the final report for project TR-573 is dedicated. PILOT is an amalgamated, electronic source of information consisting of both static and dynamic data for pile load tests conducted in the State of Iowa. The database, which includes historical data on pile load tests dating back to 1966, is intended for use in the establishment of LRFD resistance factors for design and construction control of driven pile foundations in Iowa. Although a considerable amount of geotechnical and pile load test data is available in literature as well as in various State Department of Transportation files, PILOT is one of the first regional databases to be exclusively used in the development of LRFD resistance factors for the design and construction control of driven pile foundations. Currently providing an electronically organized assimilation of geotechnical and pile load test data for 274 piles of various types (e.g., steel H-shaped, timber, pipe, Monotube, and concrete), PILOT (http://srg.cce.iastate.edu/lrfd/) is on par with such familiar national databases used in the calibration of LRFD resistance factors for pile foundations as the FHWA’s Deep Foundation Load Test Database. By narrowing geographical boundaries while maintaining a high number of pile load tests, PILOT exemplifies a model for effective regional LRFD calibration procedures.

Field Testing of Integral Abutments, Interim Report, HR-399, 1998

Integral abutment bridges are constructed without an expansion joint in the superstructure of the bridge; therefore, the bridge girders, deck, abutment diaphragms, and abutments are monolithically constructed. The abutment piles in an integral abutment bridge are vertically orientated, and they are embedded into the pile cap. When this type of a bridge experiences thermal expansion or contraction, horizontal displacements are induced at the top of the abutment piles. The flexibility of the abutment piles eliminates the need to provide an expansion joint at the inside face to the abutments: Integral abutment bridge construction has been used in Iowa and other states for many years. This research is evaluating the performance of integral abutment bridges by investigating thermally induced displacements, strains, and temperatures in two Iowa bridges. Each bridge has a skewed alignment, contains five prestressed concrete girders that support a 30-ft wide roadway for three spans, and involves a water crossing. The bridges will be monitored for about two years. For each bridge, an instrumentation package includes measurement devices and hardware and software support systems. The measurement devices are displacement transducers, strain gages, and thermocouples. The hardware and software systems include a data-logger; multiplexers; directline telephone service and computer terminal modem; direct-line electrical power; lap-top computer; and an assortment of computer programs for monitoring, transmitting, and management of the data. Instrumentation has been installed on a bridge located in Guthrie County, and similar instrumentation is currently being installed on a bridge located in Story County. Preliminary test results for the bridge located in Guthrie County have revealed that temperature changes of the bridge deck and girders induce both longitudinal and transverse displacements of the abutments and significant flexural strains in the abutment piles. For an average temperature range of 73° F for the superstructure concrete in the bridge located in Guthrie County, the change in the bridge length was about 1 118 in. and the maximum, strong-axis, flexural-strain range for one of the abutment piles was about 400 micro-strains, which corresponds to a stress range of about 11,600 psi.

ENFIN--A European network for integrative systems biology.

Integration of biological data of various types and the development of adapted bioinformatics tools represent critical objectives to enable research at the systems level. The European Network of Excellence ENFIN is engaged in developing an adapted infrastructure to connect databases, and platforms to enable both the generation of new bioinformatics tools and the experimental validation of computational predictions. With the aim of bridging the gap existing between standard wet laboratories and bioinformatics, the ENFIN Network runs integrative research projects to bring the latest computational techniques to bear directly on questions dedicated to systems biology in the wet laboratory environment. The Network maintains internally close collaboration between experimental and computational research, enabling a permanent cycling of experimental validation and improvement of computational prediction methods. The computational work includes the development of a database infrastructure (EnCORE), bioinformatics analysis methods and a novel platform for protein function analysis FuncNet.

Implementación de una herramienta de metabúsqueda : MetaLib y SFX

L'article presenta les característiques i funcionalitats principals de les eines MetaLib i SFX, programaris per a la gestió i accés als recursos electrònics. S'analitzen els programaris citant els diferents tipus de funcionalitats, i la gestió i el manteniment. El procés s'emmarca en l'experiència de la Universitat Oberta de Catalunya, membre del CBUC, i se n'expliquen la configuració, els reptes i les dificultats que es van produir durant la implementació dels sistemes.

Implementació d'una eina de metacerca : MetaLib i SFX

L'article presenta les característiques i funcionalitats principals de les eines MetaLib i SFX, programaris per a la gestió i accés als recursos electrònics. S'analitzen els programaris citant els diferents tipus de funcionalitats, i la gestió i el manteniment. El procés s'emmarca en l'experiència de la Universitat Oberta de Catalunya, membre del CBUC, i se n'expliquen la configuració, els reptes i les dificultats que es van produir durant la implementació dels sistemes.

Implementing a metasearch engine : Metalib and SFX

L'article presenta les característiques i funcionalitats principals de les eines MetaLib i SFX, programaris per a la gestió i accés als recursos electrònics. S'analitzen els programaris citant els diferents tipus de funcionalitats, i la gestió i el manteniment. El procés s'emmarca en l'experiència de la Universitat Oberta de Catalunya, membre del CBUC, i se n'expliquen la configuració, els reptes i les dificultats que es van produir durant la implementació dels sistemes.

La cerca única, o com fer fàcil el camí a l'usuari

This paper presents a reflection on the need for libraries to think about how to facilitate access to the documentary sources they manage.As the number of resources available in electronic form increases, libraries are in the need to provide a simple and usable search tool that allows integrating the contents of the various information management systems they give access to.To define user expectations to the search interface, some of the features that they are accustomed to use in their requests for information on the Internet have been included.The technologies that allow the discovery layer implementation as a search tool that integrates the various information systems of the library are presented next. And below are some examples of implementations that work in line with the integration of various information sources into a single search engine, as models to consider for implementing a system of this kind.The purpose of it all is to present a state of the art of some cases of operational deployments as a starting point for any organization interested in improving access it offers to its resources on the basis of references study.

Design and Testing of Database Libraries

Nokia Push To Talk järjestelmä tarjoaa uuden kommunikointimetodin tavallisen puhelun oheen. Yksi tärkeimmistä uuden järjestelmän ominaisuuksista on puhelunmuodostuksen nopeus. Lisäksi järjestelmän tulee olla telekommunikaatiojärjestelmien yleisten periaatteiden mukainen, mahdollisimman stabiili ja skaalautuva, jotta järjestelmä olisi mahdollisimman vikasietoinen ja laajennettavissa. Diplomityön päätavoite on esitellä "C++"-tietokantakirjastojen suunnittelua ja testausta. Aluksi tutkitaan tietokantajärjestelmien problematiikkaa alkaen tietokantajärjestelmän valinnasta ja huomioiden erityisesti nopeuskriteerit. Sitten esitellään kaksi teknistä toteutusta kahta "C++"-tietokantakirjastoa varten ja pohditaan joitakin vaihtoehtoisia toteutustapoja.

Adaptive MCMC methods with applications in environmental and geophysical models

This work presents new, efficient Markov chain Monte Carlo (MCMC) simulation methods for statistical analysis in various modelling applications. When using MCMC methods, the model is simulated repeatedly to explore the probability distribution describing the uncertainties in model parameters and predictions. In adaptive MCMC methods based on the Metropolis-Hastings algorithm, the proposal distribution needed by the algorithm learns from the target distribution as the simulation proceeds. Adaptive MCMC methods have been subject of intensive research lately, as they open a way for essentially easier use of the methodology. The lack of user-friendly computer programs has been a main obstacle for wider acceptance of the methods. This work provides two new adaptive MCMC methods: DRAM and AARJ. The DRAM method has been built especially to work in high dimensional and non-linear problems. The AARJ method is an extension to DRAM for model selection problems, where the mathematical formulation of the model is uncertain and we want simultaneously to fit several different models to the same observations. The methods were developed while keeping in mind the needs of modelling applications typical in environmental sciences. The development work has been pursued while working with several application projects. The applications presented in this work are: a winter time oxygen concentration model for Lake Tuusulanjärvi and adaptive control of the aerator; a nutrition model for Lake Pyhäjärvi and lake management planning; validation of the algorithms of the GOMOS ozone remote sensing instrument on board the Envisat satellite of European Space Agency and the study of the effects of aerosol model selection on the GOMOS algorithm.

Adherence and perceptions regarding simulation training in undergraduate health Sciences

BACKGROUND: Simulation techniques are spreading rapidly in medicine. Suc h resources are increasingly concentrated in Simulation Laboratories. The MSRP-USP is structuring such a laboratory and is interested in the prevalence of individual initiatives that could be centralized there. The MSRP-USP currently has five full-curriculum courses in the health sciences: Medicine, Speech Therapy, Physical Therapy, Nutrition, and Occupational Therapy, all consisting of core disciplines. GOAL: To determine the prevalence of simulation techniques in the regular courses at MSRP-USP. METHODS: Coordinators of disciplines in the various courses were interviewed using a specifically designed semi-structured questionnaire, and all the collected data were stored in a dedicated database. The disciplines were grouped according to whether they used (GI) or did not use (GII) simulation resources. RESULTS AND DISCUSSION: 256 disciplines were analyzed, of which only 18.3% used simulation techniques, varying according to course: Medicine (24.7.3%), Occupational Therapy (23.0%), Nutrition (15.9%), Physical Therapy (9.8%), and Speech Therapy (9.1%). Computer simulation programs predominated (42.5%) in all five courses. The resources were provided mainly by MSRP-USP (56.3%), with additional funding coming from other sources based on individual initiatives. The same pattern was observed for maintenance. There was great interest in centralizing the resources in the new Simulation Laboratory in order to facilitate maintenance, but there was concern about training and access to the material. CONCLUSIONS: 1) The MSRP-USP simulation resources show low complexity and are mainly limited to computer programs; 2) Use of simulation varies according to course, and is most prevalent in Medicine; 3) Resources are scattered across several locations, and their acquisition and maintenance depend on individual initiatives rather than central coordination or curricular guidelines

Palveluinnovaatio ja sen johtaminen osaamisintensiivisessä palveluyrityksessä - diskurssianalyysi

Tutkimuksen tavoitteena oli tutkia KIBS-yrityksen diskurssien vaikutusta kyseisen yrityksen palveluinnovaatioprosessin johtamiseen. Kontekstina tässä työssä oli tilitoimisto, jota verrattiin tutkimuksen muihin KIBS-yrityksiin. Tutkimusmenetelmänä käytettiin haastattelua ja analyysikeinona diskurssianalyysiä. Tutkimuksen tulokset osoittavat, että tilitoimiston diskursseissa luotetaan vahvasti tietotekniikan ja koulutuksen voimaan palveluinnovaatioiden kehittämisessä. Innovaatiojohtamisessa tämä voi merkitä näkökentän kaventumista. Tilitoimistossa havaittuja innovaation kannustimia olivat esimerkiksi työn itsenäisyys. Tilitoimistossa palveluinnovaatioita esti liiallinen kiire. Tilitoimiston diskurssien kautta ilmenevä palveluinnovaatioprosessin johtaminen oli melko kehittymätöntä verrattuna tutkimuksen innovatiivisimpaan yritykseen, joka suunnitteli taloteknisiä ohjelmistoja.

The effectiveness of a computer program on career planning for university students

This study investigated the effectiveness of a computer program, PERSONAL CAREER DIRECTIONS (PC DIRECTIONS) (Anderson, Welborn, & Wright, 1983) on career planning and exploration for twenty-four Brock University students (18 women and 6 men) who requested career planning assistance at the Career/Placement Services of the Counselling Centre. A one-group pretest/posttest design was used in the study_ Progress in career planning and exploration was measured by Career Planning (CP) and Career Exploration (CE) scales of the Career Development Inventory (College and University Form) (Super, Thompson, Lindeman, Jordaan, & Myers, 1981). A paired samples 2-tailed t test for Career Development Attitudes (CDA) , the combined CP and CE scales, revealed the posttest scores were significantly higher than the pretest scores, t(23) = 3.74, 2 < .001. Student progress was also assessed by self-report lists of job titles which reflected positive changes after students used PC DIRECTIONS. In response to several questions, students' attitudes were more positive than negative toward the program. Implications are that PC DIRECTIONS is an effective component in promoting career planning for university students. Further studies may reveal that different types of students may benefit from different interventions in the career planning process.

Abbildung von XML-Dokumenten auf SQL:2003-konforme Datentypen

Die Auszeichnungssprache XML dient zur Annotation von Dokumenten und hat sich als Standard-Datenaustauschformat durchgesetzt. Dabei entsteht der Bedarf, XML-Dokumente nicht nur als reine Textdateien zu speichern und zu transferieren, sondern sie auch persistent in besser strukturierter Form abzulegen. Dies kann unter anderem in speziellen XML- oder relationalen Datenbanken geschehen. Relationale Datenbanken setzen dazu bisher auf zwei grundsätzlich verschiedene Verfahren: Die XML-Dokumente werden entweder unverändert als binäre oder Zeichenkettenobjekte gespeichert oder aber aufgespalten, sodass sie in herkömmlichen relationalen Tabellen normalisiert abgelegt werden können (so genanntes „Flachklopfen“ oder „Schreddern“ der hierarchischen Struktur). Diese Dissertation verfolgt einen neuen Ansatz, der einen Mittelweg zwischen den bisherigen Lösungen darstellt und die Möglichkeiten des weiterentwickelten SQL-Standards aufgreift. SQL:2003 definiert komplexe Struktur- und Kollektionstypen (Tupel, Felder, Listen, Mengen, Multimengen), die es erlauben, XML-Dokumente derart auf relationale Strukturen abzubilden, dass der hierarchische Aufbau erhalten bleibt. Dies bietet zwei Vorteile: Einerseits stehen bewährte Technologien, die aus dem Bereich der relationalen Datenbanken stammen, uneingeschränkt zur Verfügung. Andererseits lässt sich mit Hilfe der SQL:2003-Typen die inhärente Baumstruktur der XML-Dokumente bewahren, sodass es nicht erforderlich ist, diese im Bedarfsfall durch aufwendige Joins aus den meist normalisierten und auf mehrere Tabellen verteilten Tupeln zusammenzusetzen. In dieser Arbeit werden zunächst grundsätzliche Fragen zu passenden, effizienten Abbildungsformen von XML-Dokumenten auf SQL:2003-konforme Datentypen geklärt. Darauf aufbauend wird ein geeignetes, umkehrbares Umsetzungsverfahren entwickelt, das im Rahmen einer prototypischen Applikation implementiert und analysiert wird. Beim Entwurf des Abbildungsverfahrens wird besonderer Wert auf die Einsatzmöglichkeit in Verbindung mit einem existierenden, ausgereiften relationalen Datenbankmanagementsystem (DBMS) gelegt. Da die Unterstützung von SQL:2003 in den kommerziellen DBMS bisher nur unvollständig ist, muss untersucht werden, inwieweit sich die einzelnen Systeme für das zu implementierende Abbildungsverfahren eignen. Dabei stellt sich heraus, dass unter den betrachteten Produkten das DBMS IBM Informix die beste Unterstützung für komplexe Struktur- und Kollektionstypen bietet. Um die Leistungsfähigkeit des Verfahrens besser beurteilen zu können, nimmt die Arbeit Untersuchungen des nötigen Zeitbedarfs und des erforderlichen Arbeits- und Datenbankspeichers der Implementierung vor und bewertet die Ergebnisse.

Programari creador i consultor de genealogia familiar

Aquest projecte es centre en el disseny d’ un programari creador i consultor de genealogia familiar. Es tracta d'un programari per a ús individual, no col.lectiu, i sense ànim de lucre, on les dades més importants són les dels familiars. Qualsevol usuari pot crear diverses famílies (en un mateix sistema) i associar-hi familiars. Es poden introduir molts tipus de dades personals, a més de poder vincular-hi els arxius i events que es desitgin. Un event és un aconteixament en la vida d'una o diverses persones. D'aquesta manera l'usuari pot agregar molts tipus d'esdeveniments diferents als familiars i també hi ha la opció, que diferencia l'aplicació de moltes altres ja existents, d'agregar esdeveniments als events. També cal destacar que a cada familiar, arxiu i event pot associar-se un lloc (poblacio, regió i estat) i d'aquesta forma la informació total que es pot generar, encara és encara més completa. La possibilitat de crear llocs nous és força àmplia. Finalment l'usuari podrà associar els diferents familiars segons parentesc i d'aquesta forma obtenir un arbre genealògic de tota la família. Un dels aspectes més treballats a l'aplicació, ha estat que totes les dades anteriorment esmentades, poguessin ser visualitzades fàcil i ràpidament per l'usuari final. La navegació entre pantalles i les diferents opcions, han estat pensades i dissenyades, perquè l'usuari final no tingui cap dificultat, sigui quin sigui el seu nivell. D'aquesta manera, a més de la gestió possible de dades de familiars, arxius, events i llocs; la utilització de le mateixes i la creació de multitud de vistes i cerques diferents, ajuden a que el programari sigui força complet