Asymmetric stochastic switching driven by intrinsic molecular noise

Low-copy-number molecules are involved in many functions in cells. The intrinsic fluctuations of these numbers can enable stochastic switching between multiple steady states, inducing phenotypic variability. Herein we present a theoretical and computational study based on Master Equations and Fokker-Planck and Langevin descriptions of stochastic switching for a genetic circuit of autoactivation. We show that in this circuit the intrinsic fluctuations arising from low-copy numbers, which are inherently state-dependent, drive asymmetric switching. These theoretical results are consistent with experimental data that have been reported for the bistable system of the gallactose signaling network in yeast. Our study unravels that intrinsic fluctuations, while not required to describe bistability, are fundamental to understand stochastic switching and the dynamical relative stability of multiple states.

Innovation – from individual intuition to collaborative innovation. The role of individual key actor in facilitation of innovation in large organization context

The objective of this research was to study the role of key individuals in facilitation of technology enabled bottom-up innovation in large organization context. The development of innovation was followed from the point of view of individual actor (key individual) in two cases, through three levels: individual, team and organization, by using knowledge creation and innovation models. This study provides theoretical synthesis and framework through which the study is driven. The results of the study indicate, that in bottom-up initiated innovations the role of key individuals is still crucial, but innovation today is collective effort and there acts several entrepreneurial key individuals: innovator, user champion and organizational sponsor, whose collaboration and developing interaction drives innovation further. The team work is functional and fluent, but it meets great problems in interaction with organization. The large organizations should develop its practices and ability to react on emerging bottom-up initiations, in order to embed innovation to organization and gain sustainable innovation. In addition, bottom-up initiated innovations are demonstrations of peoples knowing, tacit knowledge and therefore renewing of an organization.

Estudo do comportamento da lipase comercial Lipozyme RM IM em reações de esterificação para obtenção de biodiesel

The aim of this work was to study monoalkyl ester synthesis catalyzed by immobilized lipase Lipozyme RM IM via the esterification reaction. Yields of over 90% were obtained with butanol in esterification reactions with oleic acid. In the reactions with deodorizer distillates of vegetable oils and butanol, the conversion obtained was greater than 80% after 2.5 h. For the esterification reaction of palm fatty acid deodorizer distillate (PFAD) and butanol, seven reuse cycles of Lipozyme RM IM were carried out and the final conversion was 42% lower than the initial conversion.

The third transformation of Japan: An institutional narrative on agglomeration economies in abenomics

Objective of the study The aim of this study is to understand the institutional implications in Abenomics in a spatial context, the contemporary economic reform taking place in Japan, which is to finally end over two decades of economic malaise. For theoretical perspective of choice, this study explores a synthesis of institutionalism as the main approach, complemented by economies of agglomeration in spatial economics, or New Economic Geography (NEG). The outcomes include a narrative with implications for future research, as well as possible future implications for the economy of Japan, itself. The narrative seeks to depict the dialogue between public discourse and governmental communication in order to create a picture of how this phenomenon is being socially constructed. This is done by studying the official communications by the Cabinet along with public media commentary on respective topics. The reform is studied with reference to historical socio-cultural, economic evolution of Japan, which in turn, is explored through a literature review. This is to assess the unique institutional characteristics of Japan pertinent to reform. Research method This is a social and exploratory qualitative study – an institutional narrative case study. The methodological approach was kept practical: in addition to literature review, a narrative, thematic content analysis with structural emphasis was used to construct the contemporary narrative based on the Cabinet communication. This was combined with practical analytic tools borrowed from critical discourse analysis, which were utilized to assess the implicit intertextual agenda within sources. Findings What appears to characterize the discourse is status quo bias that comes in multiple forms. The bias is also coded in the institutions surrounding the reform, wherein stakeholders have vested interests in protecting the current state of affairs. This correlates with uncertainty avoidance characteristic to Japan. Japan heeds the international criticism to deregulate on a rhetorical level, but consistent with history, the Cabinet solutions appear increasingly bureaucratic. Hence, the imposed western information-age paradigm of liberal cluster agglomeration seems ill-suited to Japan which lacks risk takers and a felicitous entrepreneur culture. The Japanese, however, possess vast innovative potential ascribed to some institutional practices and traits, but restrained by others. The derived conclusion is to study the successful intrapreneur cases in Japanese institutional setting as a potential benchmark for Japan specific cluster agglomeration, and a solution to its structural problems impeding growth.

Synthèse d'une librairie d'analogues monomériques et dimériques du sLe X

Dans cet ouvrage sera décrite la synthèse de nouveaux analogues du sialyl Lewis X (sLex). A cet effet, nous avons préparé une librairie d’analogues synthétisée à partir d’une approche mettant en jeu un «espaceur» acyclique permettant d’avoir un biais conformationnel que nous avons défini comme la stratégie ATC-B. Nous avions déjà démontré que certains analogues portant un groupe benzoate en C-2 et en C-4 du galactose présentent une activité 50 fois supérieure à celle du sLex. Nous avions par ailleurs démontré qu’en l’absence du benzoate en C-2, l’activité devient alors trois fois plus faible. A présent, il paraissait interessant de synthétiser des analogues ayant seulement un groupe benzoate en C-4 pour evaluer l’impact de ce groupement sur la puissance de nos analogues. Par le passé, nous avions également mis en évidence le rôle des esters sur l’activité des analogues portant un «espaceur» acyclique dans le cadre de la stratégie ATC-B. Nous effectuerons donc des variations à ce niveau pour en évaluer l’impact. Enfin, nous avons préparé une nouvelle famille d’analogues de type dimère. Ceux-ci seront constitués de 2 unités des composés monomériques synthétisés précédemment. La synthèse de ces dimères fera l’emploi de la «Click Chemistry». Cette étude nous mènera a vous présenter la synthèse de ces composés et la méthodologie employée.

Nouveaux complexes pinces POCOP, NHCCOP, PIMCOP et PIMIOCOP, et complexes cyclométallés de Ni(II) : synthèse, caractérisation et réactivité.

Cette thèse traite de la chimie des complexes pinces de Ni(II) ainsi que des complexes cyclométallés de Ni(II) comportant au moins un motif phosphinite. Elle se divise en trois parties. La première concerne la synthèse, la caractérisation, le mécanisme de formation et la réactivité des complexes pinces de Ni(II) à base de ligand de type POCOP 1,3-(i-Pr2PO)2C6H4. De nouveaux ligands de type R-(POCOP) = κP,κC,κP-{Rn-2,6-( R'2PO)2C6H4-n}; Rn = 4-OMe, 4-Me, 4-CO2Me, 3-OMe, 3- CO2Me, 3,5-t-Bu2 ; R' = i-Pr, t-Bu ont été synthétisés suite à l'addition de chlorophosphine ClPR'2 à une solution de résorcinol ou dérivés en présence de base. La synthèse des complexes R-(POCOP)Ni(Br) s'effectue à partir du ligand correspondant en présence de base, et de {NiBr2(NCiPr)}n. Ce nouveau précurseur de nickel est synthétisé à partir de brome de nickel métallique dans l'isobutyronitrile. Il est stable sous atmosphère inerte et sa solubilité dans les solvants polaires permet d'étudier les synthèses des complexes en milieu homogène. Le mécanisme de formation des complexes portant des ligand pinces (PCsp3P) 1,3-(i- Pr2PCH2CH2)2CH2, (POCsp3OP) 1,3-(i-Pr2POCH2)2CH2, (PCsp2P) 1,3-(i- Pr2PCH2)2C6H4, Rn-(POCsp2OP) 1,3-(i-Pr2PO)2C6H4-n via nickellation du lien C-H a été investigué avec une méthode de réaction de compétition. Cette étape a été déterminée comme étant de nature électrophile. Les complexes résultants ont été complètement caractérisés. Une corrélation a notamment été effectuée entre le déplacement chimique du Cipso en spectroscopie RMN 13C et le potentiel d'oxydation Eox en voltamétrie cyclique. Une nouvelle méthode de synthèse directe verte "one pot" a été mise en place. En faisant réagir à 75 °C un mélange hétérogène de II résorcinol, de chlorodiisopropylphosphine et de nickel métallique en poudre, on obtient le complexes pince (POCOP)Ni(Cl) avec des rendements allant jusqu'à 93%. La réactivité de ces complexes POCOP a été investiguée pour des réactions de fluorination et trifluorométhylation des halogénures d'alkyle. La synthèse du (POCOP)Ni(F) a lieu à partir de précurseur (POCOP)Ni(X) (X=Br, Cl), en présence d'un large excès de fluorure d'argent AgF. Ce complexe catalyse la fluorination du bromure de benzyle et peut être converti en (POCOP)Ni(CF3) en présence de réactif du Ruppert, Me3SiCF3. La réaction entre (POCOP)Ni(CF3) et le bromure de benzyle dans les solvants aromatiques mène à la conversion totale du complexe en (POCOP)Ni(Br) et à l'inattendue benzylation du solvant aromatique utilisé. La seconde partie concerne la synthèse des nouveaux complexes non symétriques à base de ligands comportant un motif imidazolo-phosphine (PIMCOP) 3-[2-(R2P)-C3H2N2]-(R2PO)-C6H3, imidazoliophosphine (PIMIOCOP) 3-[2-(R2P)-3- (CH3)-C3H2N2]-(R2PO)-C6H3] et carbène N-hétérocyclique (NHCCOP). La double déprotonation du 3-hydroxyphenyl-imidazole suivi de l'addition de deux équivalents de chlorodiphenylphosphine mène à l'obtention du ligand PIMCOP 3-[3-(CH3)- C3H2N2]-(R2PO)-C6H3. L'étape de nickellation a lieu comme dans le cas des composés (POCOP)Ni. La méthylation du motif imidazole du (PIMCOP)Ni(Br) par le triflate de méthyle MeOTf, donne le dérivé (PIMIOCOP)Ni(Br). Ce dernier est converti en (NHCCOP)Ni(Br) après l'addition de chlorure de tétraéthylamonium NEt4Cl. Les analogues i-Pr2P de ces complexes sont synthétisés en remplaçant ClPPh2 par ClPiPr2. On obtient les espèces cationiques [(PIMCOP)Ni(NCCH3)][OTf], [(PIMIOCOP)Ni(NCCH3)][OTf]2 et III [(NHCCOP)Ni(NCCH3)][OTf] suite à l'addition en solution dans l'acétonitrile de triflate d'argent AgOTf. Ces espèces ont été utilisés comme catalyseurs pour la synthèse d'amidine à partir de benzonitrile et de diverse amines aliphatiques. Enfin des complexes orthonickellés trans-Ni[(ĸ2-P,C-P(OC6H4)-(iPr2)( iPr2P(OC6H5))]Br à base de phosphinite ont été synthétisés et caractérisés. Les ligands sont synthétisés par réaction d'un phénol et de chlorodiisopropylphosphine en présence de base. L'ajout de {NiBr2(NCiPr)}n et de triéthylamine permet l'orthométallation via une étape de nickellation C-H. Un intermédiaire trans- [NiBr2{PiPr2(OC6H5)}2] de cette réaction a été isolé. Le complexe dimère peut réagir avec des espèces électrophiles mener à l'ortho-fonctionnalisation de la phosphinite.

Physicochemical and Biochemical Characterization of Enzymes Immobilized on lnorganic Matrices

Biotechnology is currently considered as a useful altemative to conventional process technology in industrial and catalytic fields. The increasing awareness of the need to create green and sustainable production processes in all fields of chemistry has stimulated materials scientists to search for innovative catalysts supports. lmmobilization of enzymes in inorganic matrices is very useful in practical applications due to the preserved stability and catalytic activity of the immobilized enzymes under extreme conditions. Nanostructured inorganic, organic or hybrid organic-inorganic nanocomposites present paramount advantages to facilitate integration and miniaturization of the devices (nanotechnologies), thus affording a direct connection between the inorganic, organic and biological worlds. These properties, combined with good chemical stability, make them competent candidates for designed biocatalysts, protein-separation devices, drug delivery systems, and biosensors Aluininosilicate clays and layered double hydroxides, displaying, respectively, cation and anion exchange properties, were found to be attractive materials for immobilization because of their hydrophilic, swelling and porosity properties, as well as their mechanical and thermal stability.The aim of this study is the replacement of inorganic catalysts by immobilized lipases to obtain purer and healthier products.Mesocellular silica foams were synthesized by oil-in-water microemulsion templating route and were functionalized with silane and glutaraldehyde. " The experimental results from IR spectroscopy and elemental analysis demonstrated the presence of immobilized lipase and also functionalisation with silane and glutaraldehyde on the supports.The present work is a comprehensive study on enzymatic synthesis of butyl isobutyrate through esterification reaction using lipase immobilized onto mesocellular siliceous foams and montmorillonite K-10 via adsorption and covalent binding. Moreover, the irnrnobil-ization does not modify the nature of the kinetic mechanism proposed which is of the Bi-Bi Ping—Pong type with inhibition by n-butanol. The immobilized biocatalyst can be commercially exploited for the synthesis of other short chain flavor esters. Mesocellular silica foams (MCF) were synthesized by microemusion templating method via two different routes (hydrothermal and room temperature). and were functionalized with silane and glutaraldehyde. Candida rugosa lipase was adsorbed onto MCF silica and clay using heptane as the coupling medium for reactions in non-aqueous media. I From XRD results, a slight broadening and lowering of d spacing values after immobilization and modification was observed in the case of MCF 160 and MCF35 but there was no change in the d-spacing in the case of K-10 which showed that the enzymes are adsorbed only on the external surface. This was further confirmed from the nitrogen adsorption measurements

Polymeric complexesSynthesis, Characterization and Analytical Applications

As the application of polymeric complexes is enormous, there exists a continuing interest in the synthesis and characterization of these complexes. The synthetic and characterization parts are very important in an academic point of view. Further in an application point of view also polymeric ligands/complexes are gaining attention.The thesis is divided in to six chapters, in which the first chapter gives an introduction along with a brief review on polymeric ligands/ complexes. The second chapter explains the different procedure adopted for the whole work along with the details of the reagents/ instruments used. The third chapter gives a report of the detailed study regarding the synthesis and characterization of eighteen complexes. While the fourth chapter is a report of the ion removal studies using three polymeric ligands, the fifth chapter explains the development of a polymeric complex as ion selective electrode material for the fabrication of a CC ion selective electrode. The sixth chapter presents the summary and tables, figures and references are given separately at the end.

Atomistic-continuum modeling of ultrafast laser-induced melting of silicon targets

In this work, we present an atomistic-continuum model for simulations of ultrafast laser-induced melting processes in semiconductors on the example of silicon. The kinetics of transient non-equilibrium phase transition mechanisms is addressed with MD method on the atomic level, whereas the laser light absorption, strong generated electron-phonon nonequilibrium, fast heat conduction, and photo-excited free carrier diffusion are accounted for with a continuum TTM-like model (called nTTM). First, we independently consider the applications of nTTM and MD for the description of silicon, and then construct the combined MD-nTTM model. Its development and thorough testing is followed by a comprehensive computational study of fast nonequilibrium processes induced in silicon by an ultrashort laser irradiation. The new model allowed to investigate the effect of laser-induced pressure and temperature of the lattice on the melting kinetics. Two competing melting mechanisms, heterogeneous and homogeneous, were identified in our big-scale simulations. Apart from the classical heterogeneous melting mechanism, the nucleation of the liquid phase homogeneously inside the material significantly contributes to the melting process. The simulations showed, that due to the open diamond structure of the crystal, the laser-generated internal compressive stresses reduce the crystal stability against the homogeneous melting. Consequently, the latter can take a massive character within several picoseconds upon the laser heating. Due to the large negative volume of melting of silicon, the material contracts upon the phase transition, relaxes the compressive stresses, and the subsequent melting proceeds heterogeneously until the excess of thermal energy is consumed. A series of simulations for a range of absorbed fluences allowed us to find the threshold fluence value at which homogeneous liquid nucleation starts contributing to the classical heterogeneous propagation of the solid-liquid interface. A series of simulations for a range of the material thicknesses showed that the sample width we chosen in our simulations (800 nm) corresponds to a thick sample. Additionally, in order to support the main conclusions, the results were verified for a different interatomic potential. Possible improvements of the model to account for nonthermal effects are discussed and certain restrictions on the suitable interatomic potentials are found. As a first step towards the inclusion of these effects into MD-nTTM, we performed nanometer-scale MD simulations with a new interatomic potential, designed to reproduce ab initio calculations at the laser-induced electronic temperature of 18946 K. The simulations demonstrated that, similarly to thermal melting, nonthermal phase transition occurs through nucleation. A series of simulations showed that higher (lower) initial pressure reinforces (hinders) the creation and the growth of nonthermal liquid nuclei. For the example of Si, the laser melting kinetics of semiconductors was found to be noticeably different from that of metals with a face-centered cubic crystal structure. The results of this study, therefore, have important implications for interpretation of experimental data on the kinetics of melting process of semiconductors.

Noves aproximacions a la síntesi i caracterització de poliglicols al·lílics, polihidrosiloxans i surfactants copolimèrics. Avaluació d'aquests surfactants en formulacions de poliuretà

Els polímers són una sèrie de compostos que troben un ampli ventall d'aplicacions en la indústria actual. Un exemple són les espumes de poliuretà, estructures de tipus cel·lular obtingudes mitjançant la reacció química entre compostos de tipus isocianat i compostos de tipus poliol (polièters amb diferent nombre de grups hidroxil). És imprescindible l'ús d'additius d'estructura tensioactiva (surfactants de silicona) per estabilitzar el procés d'espumació i per proporcionar una estructura cel·lular ordenada i homogènia en mida i distribució. La síntesis i caracterització de les molècules precursores (polihidrosiloxans i polièters al·lílics), l'estudi de la reacció d'hidrosililació com a via d'obtenció dels diferents surfactants per reacció d'addició entre els polihidrosiloxans i els polièters al·lílics i la caracterització i avaluació en formulacions comercials de poliuretà dels surfactants sintetitzats han constituït els objectius del present treball. MEMÒRIA La Tesi Doctoral ha estat presentada seguint el següent esquema: CAPÍTOL I. INTRODUCCIÓ A LA QUÍMICA DEL POLIURETÀ. Es presenten els principis de la química del poliuretà, fent esment dels recents avenços en la síntesis i caracterització d'aquests compostos polimèrics, així com un apartat concret centrat en els surfactants de silicona. Es presenten les estructures habituals d'aquests compostos comercials i es detallen les reaccions de síntesi i les característiques físiques que aquests compostos proporcionen a les espumes de poliuretà. CAPÍTOL II. OBJECTIUS. 1.- Síntesis y caracterització d'una àmplia gamma de poliglicols al·lílics i de polihidrosiloxans amb grups hidrur reactius, ambdós precursors d'estructures polimèriques de tipus surfactant. 2.- Estudi de la reacció d'hidrosililació com a via de formació d'enllaços Si-C no hidrolitzables, mitjançant la reacció d'addició entre els substrats al·lílics insaturats i els polisiloxans amb grups hidrur reactius. 3.- Caracterització de les estructures polimèriques de tipus surfactant sintetitzades i avaluació d'aquestes en formulacions de poliuretà, a fi de relacionar l'estructura química d'aquests oligómers amb els efectes físics que originen en l'espuma de poliuretà. CAPÍTOL III. SÍNTESI I CARACTERITZACIÓ DE SUBSTRATS AL·LÍLICS INSATURATS DE TIPUS POLIGLICOL. S'han caracteritzat per HPLC-UV una sèrie de polietilenglicols comercials. S'ha estudiat la reacció de derivatització al·lílica sobre els grups hidroxil dels polièters comercials (PEG, PPG i copolímers PEG-PPG) i s'han caracteritzat exhaustivament els productes sintetitzats (1H,13C-RMN, GC, GC-MS, FTIR, ESI-MS, HPLC-UV). S'ha iniciat un estudi de polimerització aniònica sobre nous epòxids amb un punt de diversitat molecular, sintetitzant-se i caracteritzant-se els corresponents nous polièters obtinguts. CAPÍTOL IV. SÍNTESI I CARACTERITZACIÓ DE POLIHIDROSILOXANS REACTIUS. S'estudia la síntesis de polihidrosiloxans amb grups hidrur reactius, mitjançant la reacció de polimerització aniònica d'obertura d'anell ("AROP, anionic ring opening polimerization") i mitjançant la reacció de polimerització per equilibració catiònica. Es presenta una caracterització exhaustiva dels productes sintetitzats i es descriu la naturalesa de la microestructura polimèrica a partir de la distribució bivariant dels copolímers PDMS-co-PHMS (poli(dimetilsiloxà)-co-poli(hidrometilsiloxà)). CAPÍTOL V. ESTUDI SISTEMÀTIC DE LA REACCIÓ D'HIDROSILILACIÓ. S'ha estudiat la reacció d'hidrosililació amb la finalitat de sintetitzar estructures copolimèriques poliglicol-polisiloxà a partir de la reacció de polisiloxans hidrur reactius i polièters al·lílics. S'han provat diferents catalitzadors (Pt/C 5%, cat. de Speier i cat. de Karstedt), s'han sintetitzat diferents estructures tensoactives (lineals i ramificades) i s'ha modelitzat les diferents reaccions secundàries observades, per presentar un estudi mecanístic de la reacció d'hidrosililació aplicada a la síntesis de molècules d'elevat PM a partir de la reacció entre substrats al·lílics insaturats i polihidrosiloxans. CAPÍTOL VI. AVALUACIÓ DELS SURFACTANTS EN FORMULACIONS DE POLIURETÀ. S'ha estudiat la idoneïtat dels surfactants de silicona sintetitzats en diferents formulacions de poliuretà comercials. S'ha relacionat el comportament físic d'aquests surfactants en les espumes de poliuretà amb la seva estructura química a partir de l'anàlisi per microscòpia electrònica de rastreig. CAPÍTOL VII. CONCLUSIONS. S'han esposat les conclusions extretes de cada capítol.

Reversible addition of CO to coordinatively unsaturated high-spin iron(II) complexes

Several new coordinatively unsaturated iron(II) complexes of the types [Fe(EN-iPr)X2] (E = P, S, Se; X = Cl, Br) and [Fe(ON-iPr)2X]X containing bidentate EN ligands based on N-(2-pyridinyl)aminophosphines as well as oxo, thio, and seleno derivatives thereof were prepared and characterized by NMR spectroscopy and X-ray crystallography. Mössbauer spectroscopy and magnetization studies confirmed their high-spin nature with magnetic moments very close to 4.9 μB, reflecting the expected four unpaired d-electrons in all these compounds. Stable low-spin carbonyl complexes of the types [Fe(PN-iPr)2(CO)X]X (X = Cl, Br) and cis-CO,cis-Br-[Fe(PN-iPr)(CO)2X2] (X = Br) were obtained by reacting cis-Fe(CO)4X2 with the stronger PN donor ligands, but not with the weaker EN donor ligands (E = O, S, Se). Furthermore, the reactivity of [Fe(PN-iPr)X2] toward CO was investigated by IR spectroscopy. Whereas at room temperature no reaction took place, at −50 °C [Fe(PN-iPr)X2] added readily CO to form, depending on the nature of X, the mono- and dicarbonyl complexes [Fe(PN-iPr)(X)2(CO)] (X = Cl) and [Fe(PN-iPr)(CO)2X2] (X = Cl, Br), respectively. In the case of X = Br, two isomeric dicarbonyl complexes, namely, cis-CO,trans-Br-[Fe(PN-iPr)(CO)2Br2] (major species) and cis-CO,cis-Br-[Fe(PN-iPr)(CO)2Br2] (minor species), are formed. The addition of CO to [Fe(PN-iPr)X2] was investigated in detail by means of DFT/B3LYP calculations. This study strongly supports the experimental findings that at low temperature two isomeric low-spin dicarbonyl complexes are formed. For kinetic reasons cis,trans-[Fe(PN-iPr)(CO)2Br2] releases CO at elevated temperature, re-forming [Fe(PN-iPr)Br2], while the corresponding cis,cis isomer is stable under these conditions.

Molecular modelling studies of binding of DACD derivatives into G-Quadruplex DNA: comparison of force field and quantum polarized ligand docking methods

The DNA G-qadruplexes are one of the targets being actively explored for anti-cancer therapy by inhibiting them through small molecules. This computational study was conducted to predict the binding strengths and orientations of a set of novel dimethyl-amino-ethyl-acridine (DACA) analogues that are designed and synthesized in our laboratory, but did not diffract in Synchrotron light.Thecrystal structure of DNA G-Quadruplex(TGGGGT)4(PDB: 1O0K) was used as target for their binding properties in our studies.We used both the force field (FF) and QM/MM derived atomic charge schemes simultaneously for comparing the predictions of drug binding modes and their energetics. This study evaluates the comparative performance of fixed point charge based Glide XP docking and the quantum polarized ligand docking schemes. These results will provide insights on the effects of including or ignoring the drug-receptor interfacial polarization events in molecular docking simulations, which in turn, will aid the rational selection of computational methods at different levels of theory in future drug design programs. Plenty of molecular modelling tools and methods currently exist for modelling drug-receptor or protein-protein, or DNA-protein interactionssat different levels of complexities.Yet, the capasity of such tools to describevarious physico-chemical propertiesmore accuratelyis the next step ahead in currentresearch.Especially, the usage of most accurate methods in quantum mechanics(QM) is severely restricted by theirtedious nature. Though the usage of massively parallel super computing environments resulted in a tremendous improvement in molecular mechanics (MM) calculations like molecular dynamics,they are still capable of dealing with only a couple of tens to hundreds of atoms for QM methods. One such efficient strategy that utilizes thepowers of both MM and QM are the QM/MM hybrid methods. Lately, attempts have been directed towards the goal of deploying several different QM methods for betterment of force field based simulations, but with practical restrictions in place. One of such methods utilizes the inclusion of charge polarization events at the drug-receptor interface, that is not explicitly present in the MM FF.

The novel ruthenium-gamma-linolenic complex [Ru(2)(aGLA)(4)Cl] inhibits C6 rat glioma cell proliferation and induces changes in mitochondrial membrane potential, increased reactive oxygen species generation and apoptosis in vitro

The present study reports the synthesis of a novel compound with the formula [Ru(2)(aGLA)(4)Cl] according to elemental analyses data, referred to as Ru(2)GLA. The electronic spectra of Ru(2)GLA is typical of a mixed valent diruthenium(II,III) carboxylate. Ru(2)GLA was synthesized with the aim of combining and possibly improving the anti-tumour properties of the two active components ruthenium and gamma-linolenic acid (GLA). The properties of Ru(2)GLA were tested in C6 rat glioma cells by analysing cell number, viability, lipid droplet formation, apoptosis, cell cycle distribution, mitochondrial membrane potential and reactive oxygen species. Ru(2)GLA inhibited cell proliferation in a time and concentration dependent manner. Nile Red staining suggested that Ru(2)GLA enters the cells and ICP-AES elemental analysis found all increase in ruthenium from <0.02 to 425 mg/Kg in treated cells. The sub-G1 apoptotic cell population was increased by Ru(2)GLA (22 +/- 5.2%) when analysed by FACS and this was confirmed by Hoechst staining of nuclei. Mitochondrial membrane potential was decreased in the presence of Ru(2)GLA (44 +/- 2.3%). In contrast, the cells which maintained a high mitochondrial membrane potential had an increase (18 +/- 1.5%) in reactive oxygen species generation. Both decreased mitochondrial membrane potential and increased reactive oxygen species generation may be involved in triggering apoptosis in Ru(2)GLA exposed cells. The EC(50) for Ru(2)GLA decreased with increasing time of exposure from 285 mu M at 24h, 211 mu M at 48 h to 81 mu M at 72 h. In conclusion, Ru(2)GLA is a novel drug with anti proliferative properties in C6 glioma cells and is a potential candidate for novel therapies in gliomas. Copyright (C) 2009 John Wiley & Sons, Ltd.

Only subtle protein conformational adaptations are required for ligand binding to thyroid hormone receptors: Simulations using a novel multipoint steered molecular dynamics approach

Thyroid hormone receptors (TR) are hormone-dependent transcription regulators that play a major role in human health, development, and metabolic functions. The thyroid hormone resistance syndrome, diabetes, obesity, and some types of cancer are just a few examples of important diseases that are related to TR malfunctioning, particularly impaired hormone binding. Ligand binding to and dissociation from the receptor ultimately control gene transcription and, thus, detailed knowledge of binding and release mechanisms are fundamental for the comprehension of the receptor`s biological function and development of pharmaceuticals. In this work, we present the first computational study of ligand entry into the ligand binding domain (LBD) of a nuclear receptor. We report molecular dynamics simulations of ligand binding to TRs using a generalization of the steered molecular dynamics technique designed to perform single-molecule pulling simulations along arbitrarily nonlinear driving pathways. We show that only gentle protein movements and conformational adaptations are required for ligand entry into the LBDs and that the magnitude of the forces applied to assist ligand binding are of the order of the forces involved in ligand dissociation. Our simulations suggest an alternative view for the mechanisms ligand binding and dissociation of ligands from nuclear receptors in which ligands can simply diffuse through the protein surface to reach proper positioning within the binding pocket. The proposed picture indicates that the large-amplitude protein motions suggested by the apo- and holo-RXR alpha crystallographic structures are not required, reconciling conformational changes of LBDs required for ligand entry with other nuclear receptors apo-structures that resemble the ligand-bound LBDs.

Extração enzimática de óleo e produção in situ de biodiesel a partir da Moringa oleífera Lam

With the growth and development of modern society, arises the need to search for new raw materials and new technologies which present the "clean" characteristic, and do not harm the environment, but can join the energy needs of industry and transportation. The Moringa oleifera Lam, plant originating from India, and currently present in the Brazilian Northeast, presents itself as a multi-purpose plant, can be used as a coagulant in water treatment, as a natural remedy and as a feedstock for biodiesel production. In this work, Moringa has been used as a raw material for studies on the extraction and subsequently in the synthesis of biodiesel. Studies have been conducted on various techniques of Moringa oil extraction (solvents, mechanical pressing and enzymatic), being specially developed an experimental design for the aqueous extraction with the aid of the enzyme Neutrase© 0.8 L, with the aim of analyzing the influence variable pH (5.5-7.5), temperature (45-55°C), time (16-24 hours) and amount of catalyst (2-5%) on the extraction yield. In relation to study of the synthesis of biodiesel was initially carried out a conventional transesterification (50°C, KOH as a catalyst, methanol and 60 minutes reaction). Next, a study was conducted using the technique of in situ transesterification by using an experimental design variables as temperature (30-60°C), catalyst amount (2-5%), and molar ratio oil / ethanol (1:420-1:600). The extraction technique that achieved the highest extraction yield (35%) was the one that used hexane as a solvent. The extraction using 32% ethanol obtained by mechanical pressing and extraction reached 25% yield. For the enzymatic extraction, the experimental design indicated that the extraction yield was most affected by the effect of the combination of temperature and time. The maximum yield obtained in this extraction was 16%. After the step of obtaining the oil was accomplished the synthesis of biodiesel by the conventional method and the in situ technique. The method of conventional transesterification was obtained a content of 100% and esters by in situ technique was also obtained in 100% in the experimental point 7, with a molar ratio oil / alcohol 1:420, Temperature 60°C in 5% weight KOH with the reaction time of 1.5 h. By the experimental design, it was found that the variable that most influenced the ester content was late the percentage of catalyst. By physico-chemical analysis it was observed that the biodiesel produced by the in situ method fell within the rules of the ANP, therefore this technique feasible, because does not require the preliminary stage of oil extraction and achieves high levels of esters