Modelagem matemática e simulação computacional de derrames de óleo em corpos d'água: um estudo de caso na região do Porto de Santos

The objective of this work is to accomplish studies of mathematical modeling and computational simulation of oil spills in water bodies. For this reason, a case study in the region of the Port of Santos was developed using the softwares SisBAHIA and ADIOS2 for the simulation of different hypothetical scenarios of oil spilling on the surface of water, aiming to obtain information that contribute to the reduction of the possible environmental impacts that can be caused by such accidents. The results generated in the different simulations had shown that the obtained data can be extremely useful to subsidize the elaboration of mitigation plans, the mapping of risk areas or even the proposal of emergencial strategies in cases of real accidents, configuring the modeling and the simulation as important and modern tools for the environmental planning and management.

Corpos intrusivos básicos na coluna sedimentar Permo-Carbonífera no vale do rio Corumbataí

As rochas intrusivas básicas associadas a Formação Serra Geral na porção sul do município de Rio Claro e norte de Piracicaba configuram geometrias na forma de diques e soleiras. Estes corpos estão associados à uma parte da Bacia Sedimentar do Paraná que foi deformada por eventos tectônico que resultaram em trends preferencias NW-SE, condicionando a estratigrafia, a intrusão e geometria dos corpos de diabásio e formação da estrutura domática do alto de Pitanga. Os corpos intrusivos tem em sua maioria a forma de soleiras e em menor quantidade a forma de diques. A compreensão destes corpos é importante para o entendimento da estratigrafia da área conhecida como domo de Pitanga na região de Rio e Piracicaba

A prática de treinamento dos corpos dentro da empresa: um estudo sobre uma ferramenta de controle da qualidade

Befor the vast economical growth and wild scientific and technological development, the companies are demanding, more and more qualification and acting of the services rendered by their employees. Like this, tasks are restricted the they be done with excellence, because the companies are always controlling the worker's development. They are several the tools used by the companies, as acting indexes to control the course of the worker's activities or certain section, integrations for new employees with the objective to present the line of work of the company so that the new employee is framed in these patterns, trainings offered for the employees to carry out their services with quality and compromising, evaluations of year end in order to test the worker's knowledge and to demand better results, finally, the companies hope the employee integrates normativamente into the reality of the company, in way to contribute for the atingimento of the organizational strategies, always collecting for this to obtain the best results and contribute to the growth of the company. This way, that research will present a tool of control of the total quality applied in a company in Rio Clearing's city and that it is managed by an educador. They will be verified the objectives that the company has in relationship a this control, the worker's subjectivity as participant subject of the tool of control of the System of Administration of the Quality and the worker's different glances before these aspects throught an interview.

Corpos humanos: Re-desenho de silo e armazéns às margens do leito férreo da cidade de Presidente Prudente - Centro de Artes Corporais

Não disponível

Captura gravitacional de pequenos corpos por arrasto em um gás modelado usando equações hidrodinâmicas

In this work we have developed an apparatus in order to study the capture of asteroids by planets surrounded by a gas envelope during y-by, to do this we have brought an innovation by using a hydrodynamical gas. We began such project by studying particles trajectories with a code based on the analytical gas. After being used to this model we have started a process to elaborate a code which uses the gas in a numerical way. The hydrodynamical gas is described by equations which are not solved analytically. Therefore, it was used an algorithm able to model the gas by keeping all information of the gas in cells. Thus we have made a code to read such cell`s information and then to solve all calculations. Once this process is done, the program inform us all date about the simulated trajectories

Caracterização do fator de intensidade de tensão em corpos trincados através do método dos elementos finitos

The industry generally has sought materials with high mechanical resistance, low density, thermal stability and corrosion resistance. In the aerospace industry, for example, the use of aluminum alloys, such as Al 2024-T351 and Al 7075-T7351, have become essential. However, the use of these materials often do not resulted in a satisfactory performance of the component, since the presence of cracks can cause total rupture of the component, even with a tension below the yield stress of the material, unexpectedly. In this work, these aluminum alloys were analyzed and samples were modeled by the finite element method. Moreover, in the models were applied two different types of cracks, central and edge crack, a vertical force was applied to result in a tension 70% of the yield stress of the material analyzed. Through stress asymptotic distribution in the region near the crack tip were calculated the values of the stress intensity factors for each crack length, after the stress intensity factors characterized were compared graphically with the values of fracture toughness found in the available literature

Efeito das dimensões dos corpos de prova na resistência à flexão de compósitos restauradores

The aim of this study was to evaluate the influence of specimen size, in comparison with the ISO Standard, on the three point flexural strength of resin composite restorative materials Filtek Supreme and Filtek Z-250. Forty specimens were fabricated for each material with the following length, width and thickness measurements (n = 10): 1) 20 × 2 × 2 mm (ISO 4049); 2) 10 × 2 × 1 mm; 3) 10 × 1 × 1 mm; 4) 8 × 0.8 × 0.8 mm. The composites were inserted in a single increment into two-piece metal device and light-polymerized. The specimens were dry stored at 37 ± 1 °C and protected from light for 7 days. After this period, flexural strength was measured by three-point flexure test using MTS 810 equipment, with a load cell of 10 kN at a speed of 0.5 mm/min. For the evaluated sizes, the results showed significant variability (p = 0.00) with values when compared with the ISO Standard (116.700 MPa), being statistically higher for the test specimens measuring 10 × 1 × 1 mm (142.530 MPa), similar for those of 10  ×  2  ×  1  mm (115.815 MPa) and lower for those of 8 × 0.8 × 0.8 mm (86.650 MPa). There was statistical equality (p = 0.08) for the studied composites (Filtek Supreme, 125.270 MPa; Filtek Z-250, 108.130 MPa). Specimens measuring 10 × 2 × 1 mm provided flexural strength values equivalent to those obtained in the sizes recommended by the ISO 4049 standard, with lower consumption of material, energy and time.

Corpos (con) sentidos: cartografando processos de subjetivação de produto(re)s de corporalidades singulares

Pós-graduação em Psicologia - FCLAS

Entre a individualização e a multiplicidade: possibilidades de rupturas com os modos de gestão e administração dos corpos infantis

Placing the management of childhood forms considered at risk, we discuss the operation of a welfare institution and its effects on the subjective process. Created to manage the virtues of the poor behavior of children, makes visible to the way technology features disciplinary policies: surveillance is evident of cameras, high walls, electric fences and in the eyes of educators, the penalty stands normalizing practices corrective aimed at standardization bodies, educational meetings are compared to the examination, as they produce dossiers of individual behavior, emphasizing characteristics that are considered dangerous anticipates the administration and production of docile individuals, useful, productive, applying identity models. Following the lines of knowledge and power relations that constitute this space, we used the genealogy in the analysis of discursive practices that cross society in its historical construction, the genealogy allows us to achieve these movements in the consolidation process of the government of life, and also, the deconstruction of hegemonic practices. In an attempt to escape the set, we propose the realization of artistic and cultural activities within a process of collective construction as a strategy of resistance and confrontation with the dominant logic, consolidating practices that favor the enhancement of life in its manifold possibilities.

Avaliação da maturidade pulmonar de cordeiros nascidos a termo e prematuros pela análise citológica, Test de Clements e contagem de corpos lamelares do líquido amniótico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dinâmica secular rotacional de corpos tri-axiais: expansão de V em ressonâncias de primeira ordem

Consider a finite body of mass m (C1) with moments of inertia A, B and C. This body orbits another one of mass much larger M (C2), which at first will be taken as a point, even if it is not completely spherical. The body C1, when orbit C2, performs a translational motion near a Keplerian. It will not be a Keplerian due to external disturbances. We will use two axes systems: fixed in the center of mass of C1 and other inertial. The C1 attitude, that is, the dynamic rotation of this body is know if we know how to situate mobile system according to inertial axes system. The strong influence exerted by C2 on C1, which is a flattened body, generates torques on C1, what affects its dynamics of rotation. We will obtain the mathematical formulation of this problem assuming C1 as a planet and C2 as the sun. Also applies to case of satellite and planet. In the case of Mercury-Sun system, the disturbing potential that governs rotation dynamics, for theoretical studies, necessarily have to be developed by powers of the eccentricity. As is known, such expansions are delicate because of the convergence issue. Thus, we intend to make a development until the third order (superior orders are not always achievable because of the volume of terms generated in cases of first-order resonances). By defining a modern set of canonical variables (Andoyer), we will assemble a disturbed Hamiltonian problem. The Andoyer's Variables allow to define averages, which enable us to discard short-term effects. Our results for the resonant angle variation of Mercury are in full agreement with those obtained by D'Hoedt & Lemaître (2004) and Rambaux & Bois (2004)

Estudos de algumas correlações dos ovários com os corpos lúteos e o desenvolvimento fetal em fêmeas de bovinos nelore

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tópicos de teoria dos números algébricos e aplicações em reticulados e equações diofantinas

Pós-graduação em Matemática Universitária - IGCE