Caracterização do fator de intensidade de tensão em corpos trincados através do método dos elementos finitos

The industry generally has sought materials with high mechanical resistance, low density, thermal stability and corrosion resistance. In the aerospace industry, for example, the use of aluminum alloys, such as Al 2024-T351 and Al 7075-T7351, have become essential. However, the use of these materials often do not resulted in a satisfactory performance of the component, since the presence of cracks can cause total rupture of the component, even with a tension below the yield stress of the material, unexpectedly. In this work, these aluminum alloys were analyzed and samples were modeled by the finite element method. Moreover, in the models were applied two different types of cracks, central and edge crack, a vertical force was applied to result in a tension 70% of the yield stress of the material analyzed. Through stress asymptotic distribution in the region near the crack tip were calculated the values of the stress intensity factors for each crack length, after the stress intensity factors characterized were compared graphically with the values of fracture toughness found in the available literature

Efeito das dimensões dos corpos de prova na resistência à flexão de compósitos restauradores

The aim of this study was to evaluate the influence of specimen size, in comparison with the ISO Standard, on the three point flexural strength of resin composite restorative materials Filtek Supreme and Filtek Z-250. Forty specimens were fabricated for each material with the following length, width and thickness measurements (n = 10): 1) 20 × 2 × 2 mm (ISO 4049); 2) 10 × 2 × 1 mm; 3) 10 × 1 × 1 mm; 4) 8 × 0.8 × 0.8 mm. The composites were inserted in a single increment into two-piece metal device and light-polymerized. The specimens were dry stored at 37 ± 1 °C and protected from light for 7 days. After this period, flexural strength was measured by three-point flexure test using MTS 810 equipment, with a load cell of 10 kN at a speed of 0.5 mm/min. For the evaluated sizes, the results showed significant variability (p = 0.00) with values when compared with the ISO Standard (116.700 MPa), being statistically higher for the test specimens measuring 10 × 1 × 1 mm (142.530 MPa), similar for those of 10  ×  2  ×  1  mm (115.815 MPa) and lower for those of 8 × 0.8 × 0.8 mm (86.650 MPa). There was statistical equality (p = 0.08) for the studied composites (Filtek Supreme, 125.270 MPa; Filtek Z-250, 108.130 MPa). Specimens measuring 10 × 2 × 1 mm provided flexural strength values equivalent to those obtained in the sizes recommended by the ISO 4049 standard, with lower consumption of material, energy and time.

Corpos (con) sentidos: cartografando processos de subjetivação de produto(re)s de corporalidades singulares

Pós-graduação em Psicologia - FCLAS

Entre a individualização e a multiplicidade: possibilidades de rupturas com os modos de gestão e administração dos corpos infantis

Placing the management of childhood forms considered at risk, we discuss the operation of a welfare institution and its effects on the subjective process. Created to manage the virtues of the poor behavior of children, makes visible to the way technology features disciplinary policies: surveillance is evident of cameras, high walls, electric fences and in the eyes of educators, the penalty stands normalizing practices corrective aimed at standardization bodies, educational meetings are compared to the examination, as they produce dossiers of individual behavior, emphasizing characteristics that are considered dangerous anticipates the administration and production of docile individuals, useful, productive, applying identity models. Following the lines of knowledge and power relations that constitute this space, we used the genealogy in the analysis of discursive practices that cross society in its historical construction, the genealogy allows us to achieve these movements in the consolidation process of the government of life, and also, the deconstruction of hegemonic practices. In an attempt to escape the set, we propose the realization of artistic and cultural activities within a process of collective construction as a strategy of resistance and confrontation with the dominant logic, consolidating practices that favor the enhancement of life in its manifold possibilities.

Avaliação da maturidade pulmonar de cordeiros nascidos a termo e prematuros pela análise citológica, Test de Clements e contagem de corpos lamelares do líquido amniótico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dinâmica secular rotacional de corpos tri-axiais: expansão de V em ressonâncias de primeira ordem

Consider a finite body of mass m (C1) with moments of inertia A, B and C. This body orbits another one of mass much larger M (C2), which at first will be taken as a point, even if it is not completely spherical. The body C1, when orbit C2, performs a translational motion near a Keplerian. It will not be a Keplerian due to external disturbances. We will use two axes systems: fixed in the center of mass of C1 and other inertial. The C1 attitude, that is, the dynamic rotation of this body is know if we know how to situate mobile system according to inertial axes system. The strong influence exerted by C2 on C1, which is a flattened body, generates torques on C1, what affects its dynamics of rotation. We will obtain the mathematical formulation of this problem assuming C1 as a planet and C2 as the sun. Also applies to case of satellite and planet. In the case of Mercury-Sun system, the disturbing potential that governs rotation dynamics, for theoretical studies, necessarily have to be developed by powers of the eccentricity. As is known, such expansions are delicate because of the convergence issue. Thus, we intend to make a development until the third order (superior orders are not always achievable because of the volume of terms generated in cases of first-order resonances). By defining a modern set of canonical variables (Andoyer), we will assemble a disturbed Hamiltonian problem. The Andoyer's Variables allow to define averages, which enable us to discard short-term effects. Our results for the resonant angle variation of Mercury are in full agreement with those obtained by D'Hoedt & Lemaître (2004) and Rambaux & Bois (2004)

Estudos de algumas correlações dos ovários com os corpos lúteos e o desenvolvimento fetal em fêmeas de bovinos nelore

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Corpos em travessia: ensaio de uma clínica dos fluxos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Movimentos regulares e caóticos de rotação de corpos rígidos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estrutura de sistemas de três corpos fracamente ligados em duas dimensões

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)