Kinetic aspects of ion exchange in KhFek[Fe(CN)(6)](l)center dot mH(2)O compounds: A combined electrical and mass transfer functions approach

The present paper quantifies and develops the kinetic aspects involved in the mechanism of interplay between electron and ions presented elsewhere(1) for KhFek[Fe(CN)(6)](l)center dot mH(2)O (Prussian Blue) host materials. Accordingly, there are three different electrochemical processes involved in the PB host materials: H3O+, K+, and H+ insertion/extraction mechanisms which here were fully kinetically studied by means of the use of combined electronic and mass transfer functions as a tool to separate all the processes. The use of combined electronic and mass transfer functions was very important to validate and confirm the proposed mechanism. This mechanism allows the electrochemical and chemical processes involved in the KhFek[Fe(CN)(6)](l)center dot mH(2)O host and Prussian Blue derivatives to be understood. In addition, a formalism was also developed to consider superficial oxygen reduction. From the analysis of the kinetic processes involved in the model, it was possible to demonstrate that the processes associated with K+ and H+ exchanges are reversible whereas the H3O+ insertion process was shown not to present a reversible pattern. This irreversible pattern is very peculiar and was shown to be related to the catalytic proton reduction reaction. Furthermore, from the model, it was possible to calculate the number density of available sites for each intercalation/deintercalation processes and infer that they are very similar for K+ and H+. Hence, the high prominence of the K+ exchange observed in the voltammetric responses has a kinetic origin and is not related to the amount of sites available for intercalation/deintercalation of the ions.

Combined Secondary Ion Mass Spectrometry Depth Profiling and Focused Ion Beam Analysis of Cu Films Electrodeposited under Oscillatory Conditions

The recrystallization behavior of Cu films electrodeposited under oscillatory conditions in the presence of plating additives was studied by means of secondary ion mass spectrometry (SIMS) and focused ion beam analysis. When combined with bis-(sodium-sulfopropyl)-disulfide (SPS), Imep levelers (polymerizates of imidazole and epichlorohydrin) show characteristic oscillations in the galvanostatic potential/time transient measurements. These are related to the periodic degradation and restoration of the active leveler ensemble at the interface. The leveler action relies on adduct formation between the Imep and MPS (mercaptopropane sulfonic acid)-stabilized CuI complexes that appear as intermediates of the copper deposition when SPS is present in the electrolyte. SIMS depth profiling proves that additives are incorporated into the growing film preferentially under transient conditions during the structural breakdown of the leveler ensemble and its subsequent restoration. In contrast, Cu films electrodeposited in the presence of a structurally intact Imep–CuI–MPS ensemble remain largely contamination free.

Ion bombardment induced compositional changes in compound semiconductor surfaces studied by XPS combined with LEISS

Surface compositional change of GaP, GaAs, GaSb, InP, InAs, InSb, GeSi and CdSe single crystals due to low keV noble gas ion beam bombardment has been investigated by combining X-ray Photoelectron Spectroscopy (XPS) and Low Energy Ion Scattering Spectroscopy (LEISS). The purpose of using this complementary analytical method is to obtain more complete experimental evidence of ion beam modification in surfaces of compound semiconductors and GeSi alloy to improve the understanding of the mechanisms responsible for these effects. Before ion bombardment the sample surfaces were analysed nondestructively by Angular Resolved XPS (ARXPS) and LEISS to get the initial distribution of surface composition. Ion bombardment experiments were carried out using 3keV argon ions with beam current of 1μA for a period of 50 minutes, compositional changes in the surfaces of compound semiconductors and GeSi alloy were monitored with normal XPS. After ion bombardment the surfaces were re-examined with ARXPS and LEISS. Both XPS and LEISS results showed clearly that ion bombardment will change the compositional distribution in the compound semiconductor and GeSi surfaces. In order to explain the observed experimental results, two major theories in this field, Sigmund linear collision cascade theory and the thermodynamic models based on bombardment induced Gibbsian surface segregation and diffusion, were investigated. Computer simulation using TRIM code was also carried out for assistance to the theoretical analysis. Combined the results obtained from XPS and LEISS analyses, ion bombardment induced compositional changes in compound semiconductor and GeSi surfaces are explained in terms of the bombardment induced Gibbsian surface segregation and diffusion.

Combined Monte Carlo and quantum mechanics study of the solvatochromism of phenol in water. The origin of the blue shift of the lowest pi-pi* transition

A combined and sequential use of Monte Carlo simulations and quantum mechanical calculations is made to analyze the spectral shift of the lowest pi-pi* transition of phenol in water. The solute polarization is included using electrostatic embedded calculations at the MP2/aug-cc-pVDZ level giving a dipole moment of 2.25 D, corresponding to an increase of 76% compared to the calculated gas-phase value. Using statistically uncorrelated configurations sampled from the MC simulation,first-principle size-extensive calculations are performed to obtain the solvatochromic shift. Analysis is then made of the origin of the blue shift. Results both at the optimized geometry and in room-temperature liquid water show that hydrogen bonds of water with phenol promote a red shift when phenol is the proton-donor and a blue shift when phenol is the proton-acceptor. In the case of the optimized clusters the calculated shifts are in very good agreement with results obtained from mass-selected free jet expansion experiments. In the liquid case the contribution of the solute-solvent hydrogen bonds partially cancels and the total shift obtained is dominated by the contribution of the outer solvent water molecules. Our best result, including both inner and outer water molecules, is 570 +/- 35 cm(-1), in very good agreement with the small experimental shift of 460 cm(-1) for the absorption maximum.

Hydro-kinetic approach to relativistic heavy ion collisions

We develop a combined hydro-kinetic approach which incorporates a hydrodynamical expansion of the systems formed in A + A collisions and their dynamical decoupling described by escape probabilities. The method corresponds to a generalized relaxation time (tau(rel)) approximation for the Boltzmann equation applied to inhomogeneous expanding systems; at small tau(rel) it also allows one to catch the viscous effects in hadronic component-hadron-resonance gas. We demonstrate how the approximation of sudden freeze-out can be obtained within this dynamical picture of continuous emission and find that hypersurfaces, corresponding to a sharp freeze-out limit, are momentum dependent. The pion m(T) spectra are computed in the developed hydro-kinetic model, and compared with those obtained from ideal hydrodynamics with the Cooper-Frye isothermal prescription. Our results indicate that there does not exist a universal freeze-out temperature for pions with different momenta, and support an earlier decoupling of higher p(T) particles. By performing numerical simulations for various initial conditions and equations of state we identify several characteristic features of the bulk QCD matter evolution preferred in view of the current analysis of heavy ion collisions at RHIC energies.

Combined chemical separation of Lu, Hf, Sm, Nd, and REEs from a single rock digest: Precise and accurate isotope Determinations of Lu-Hf and Sm-Nd using multicollector-ICPMS

A combined procedure for separating Lu, Hf, Sm, Nd, and rare earth elements (REEs) from a single sample digest is presented. The procedure consists of the following five steps: (1) sample dissolution via sodium peroxide sintering; (2) separation of the high field strength elements from the REEs and other matrix elements by a HF-free anion-exchange column procedure; (3) purification of Hf on a cation-exchange resin; (4) separation of REEs from other matrix elements by cation exchange; (5) Lu, Sm, and Nd separation from the other REEs by reversed-phase ion chromatography. Analytical reproducibilities of Sm-Nd and Lu-Hf isotope systematics are demonstrated for standard solutions and international rock reference materials. Results show overall good reproducibilities for Sm-Nd systematics independent of the rock type analyzed. For the Lu-Hf systematics, the reproducibility of the parent/daughter ratio is much better for JB-1 (basalt) than for two analyzed felsic crustal rocks (DR-N and an Archaean granitoid). It is demonstrated that this poorer reproducibility of the Lu/Hf ratio is truly caused by sample heterogeneity; thus, results are geologically reasonable.

Etude de l'activation et de l'inactivation pH-dépendantes des canaux ASICs (Acide-Sensing Ion Channels)

RESUME: Etude de l'activation et de l'inactivation pH-dépendantes des canaux ASICs (Acid-Sensing Ion Channels) Benoîte BARGETON, Département de Pharmacologie et de Toxicologie, Université de Lausanne, rue du Bugnon 27, CH-1005 Lausanne, Suisse Les canaux sodiques ASICs (Acid-Sensing Ion Channels) participent à la signalisation neuronale dans les systèmes nerveux périphérique et central. Ces canaux non voltage dépendants sont impliqués dans l'apprentissage, l'expression de la peur, la neurodégénération consécutive à une attaque cérébrale et la douleur. Les bases moléculaires sous-tendant leur activité ne sont pas encore totalement comprises. Ces canaux sont activés par une acidification du milieu extracellulaire et régulés, entre autres, par des ions tels que le Ca2+, le Zn2+ et le CI". La cristallisation de ASIC inactivé a été publiée. Le canal est un trimére de sous-unités identiques ou homologues. Chaque sous-unité a été décrite en analogie à un avant bras, un poignet et une main constituée d'un pouce, d'un doigt, d'une articulation, une boule β et une paume. Nous avons appliqué une approche bioinformatique systématique pour identifier les pH senseurs putatifs de ASICIa. Le rôle des pH senseurs putatifs a été testé par mutagénèse dirigée et des modifications chimiques combinées à une analyse fonctionnelle afin de comprendre comment les variations de ρ H ouvrent ces canaux. Les pH senseurs sont des acides aspartiques et glutamiques éparpillés sur la boucle extracellulaire suggérant que les changements de pH contrôlent l'activation et l'inactivation de ASIC en (dé)protonant ces résidus en divers endroits de la protéine. Par exemple lors de l'activation, la protonation des résidus à l'interface entre le pouce, la boule β et le doigt d'une même sous-unité induit un mouvement du pouce vers la bouie β et le doigt. De même lors de l'inactivation du canal les paumes des trois sous-unités formant une cavité se rapprochent. D'après notre approche bioinformatique, aucune histidine n'est impliquée dans la détection des variations de pH extracellulaire c'est-à-dire qu'aucune histidine ne serait un pH-senseur. Deux histidines de ASIC2a lient le Zn2+ et modifient l'affinité apparente du canal pour les protons. Une seule des deux est conservée parmi tous les ASICs, hASICIa H163. Elle forme un réseau de liaison hydrogène avec ses voisins conservés. L'étude détaillée de ce domaine, Pinterzone, montre son importance dans l'expression fonctionnelle des canaux. La perturbation de ce réseau par l'introduction d'un résidu hydrophobe (cystéine) par mutagénèse dirigée diminue l'expression du canal à la membrane plasmique. La modification des cystéines introduites par des réactifs spécifiques aux groupements sulfhydryle inhibe les canaux mutés en diminuant leur probabilité d'ouverture. Ces travaux décrivent les effets de l'acidification du milieu extracellulaire sur les canaux ASICs. ABSTRACT: Study of pH-dependent activation and inactivation of ASIC channels Benoîte BARGETON, Department of Pharmacology and Toxicology, University of Lausanne, Rue du Bugnon 27, CH-1G05 Lausanne, Switzerland The ASIC (Acid-Sensing Ion Channels) sodium channels are involved in neuronal signaling in the central and peripheral nervous system. These non-voltage-gated channels are involved in learning, the expression of fear, neurodegeneration after ischemia and pain sensation. The molecular bases underlying their activity are not yet fully understood. ASICs are activated by extracellular acidification and regulated, eg by ions such as Ca2+, the Zn2+ and CI". The crystallization of inactivated ASIC has been published. The channel is a trimer of identical or homologous subunits. Each subunit has been described in analogy to a forearm, wrist and hand consisting of a thumb, a finger, a knuckle, a β-ball and a palm. We applied a systematic computational approach to identify putative pH sensor(s) of ASICIa. The role of putative pH sensors has been tested by site-directed mutagenesis and chemical modification combined with functional analysis in order to understand how changes in pH open these channels. The pH sensors are aspartic and glutamic acids distributed throughout the extracellular loop, suggesting that changes in pH control activation and inactivation of ASIC by protonation / deprotonation of many residues in different parts of the protein. During activation the protonation of various residues at the interface between the finger, the thumb and the β-ball induces the movement of the thumb toward the finger and the β-ball. During inactivation of the channel the palms of the three subunits forming a cavity approach each other. No histidine has been shown to be involved in extracellular pH changes detection, i.e. no histidine is a pH- sensor. Two histidines of ASIC2 bind Zn2+ and alter the apparent affinity of channel for protons. Only one of the two His is conserved among all ASICs, hASICIa H163. This residue is part of a network of hydrogen bonding with its conserved neighbors. The detailed study of this area, the interzone, shows its importance in the functional expression of ASICs. Disturbance of this network by the introduction of hydrophobic residues decreases the cell surface channel expression. Chemical modification of the introduced cysteines by thiol reactive compounds inhibits the mutated channels by a reduction of their open probability. These studies describe the effects of extracellular acidification on ASICs. RESUME GRAND PUBLIC: Etude de l'activation et de l'inactivation pH-dépendantes des canaux ASICs (Acid-Sensing Ion Channels) Benoîte BARGETON, Département de Pharmacologie et de Toxicologie, Université de Lausanne, rue du Bugnon 27, CH-1005 Lausanne, Suisse La transmission synaptique est un processus chimique entre deux neurones impliquant des neurotransmetteurs et leurs récepteurs. Un dysfonctionnement de certains types de synapses est à l'origine de beaucoup de troubles nerveux, tels que certaine forme d'épilepsie et de l'attention. Les récepteurs des neurotransmetteurs sont de très bonnes cibles thérapeutiques dans de nombreuses neuropathologies. Les canaux ASICs sont impliqués dans la neurodégénération consécutive à une attaque cérébrale et les bloquer pourraient permettre aux patients d'avoir moins de séquelles. Les canaux ASICs sont des détecteurs de l'acidité qui apparaît lors de situations pathologiques comme l'ischémie et l'inflammation. Ces canaux sont également impliqués dans des douleurs. Cibler spécifiquement ces canaux permettrait d'avoir de nouveaux outils thérapeutiques car à l'heure actuelle l'inhibiteur de choix, l'amiloride, bloque beaucoup d'autres canaux empêchant son utilisation pour bloquer les ASICs. C'est pourquoi il faut connaître et comprendre les bases moléculaires du fonctionnement de ces récepteurs. Les ASICs formés de trois sous-unités détectent les variations de l'acidité puis s'ouvrent transitoirement pour laisser entrer des ions chargés positivement dans la cellule ce qui active la signalisation neuronale. Afin de comprendre les bases moléculaires de l'activité des ASICs nous avons déterminé les sites de liaison des protons (pH-senseurs), ligands naturels des ASICs et décrit une zone importante pour l'expression fonctionnelle de ces canaux. Grâce à une validation systématique de résultats obtenus en collaboration avec l'Institut Suisse de Bioinformatique, nous avons décrit les pH-senseurs de ASICIa. Ces résultats, combinés à ceux d'autres groupes de recherche, nous ont permis de mieux comprendre comment les ASICs sont ouverts par une acidification du milieu extracellulaire. Une seconde étude souligne le rôle structural crucial d'une région conservée parmi tous les canaux ASICs : y toucher c'est diminuer l'activité de la protéine. Ce domaine permet l'harmonisation des changements dus à l'acidification du milieu extracellulaire au sein d'une même sous-unité c'est-à-dire qu'elle participe à l'induction de l'inactivation due à l'activation du canal Cette étude décrit donc quelle région de la protéine atteindre pour la bloquer efficacement en faisant une cible thérapeutique de choix.

Procedure to characterize microroughness of optical thin films: application to ion-beam-sputtered vacuum-ultraviolet coatings

A method for characterizing the microroughness of samples in optical coating technology is developed. Measurements over different spatial-frequency ranges are composed into a single power spectral density (PSD) covering a large bandwidth. This is followed by the extraction of characteristic parameters through fitting of the PSD to a suitable combination of theoretical models. The method allows us to combine microroughness measurements performed with different techniques, and the fitting procedure can be adapted to any behavior of a combined PSD. The method has been applied to a set of ion-beam-sputtered fluoride vacuum-UV coatings with increasing number of alternative low- and high-index layers. Conclusions about roughness development and microstructural growth are drawn.

A combined computational and functional approach identifies new residues involved in pH-dependent gating of ASIC1a.

Acid-sensing ion channels (ASICs) are key receptors for extracellular protons. These neuronal nonvoltage-gated Na(+) channels are involved in learning, the expression of fear, neurodegeneration after ischemia, and pain sensation. We have applied a systematic approach to identify potential pH sensors in ASIC1a and to elucidate the mechanisms by which pH variations govern ASIC gating. We first calculated the pK(a) value of all extracellular His, Glu, and Asp residues using a Poisson-Boltzmann continuum approach, based on the ASIC three-dimensional structure, to identify candidate pH-sensing residues. The role of these residues was then assessed by site-directed mutagenesis and chemical modification, combined with functional analysis. The localization of putative pH-sensing residues suggests that pH changes control ASIC gating by protonation/deprotonation of many residues per subunit in different channel domains. Analysis of the function of residues in the palm domain close to the central vertical axis of the channel allowed for prediction of conformational changes of this region during gating. Our study provides a basis for the intrinsic ASIC pH dependence and describes an approach that can also be applied to the investigation of the mechanisms of the pH dependence of other proteins.

An Ion Transport-Independent Role for the Cation-Chloride Cotransporter KCC2 in Dendritic Spinogenesis In Vivo.

The neuron-specific K-Cl cotransporter, KCC2, is highly expressed in the vicinity of excitatory synapses in pyramidal neurons, and recent in vitro data suggest that this protein plays a role in the development of dendritic spines. The in vivo relevance of these observations is, however, unknown. Using in utero electroporation combined with post hoc iontophoretic injection of Lucifer Yellow, we show that premature expression of KCC2 induces a highly significant and permanent increase in dendritic spine density of layer 2/3 pyramidal neurons in the somatosensory cortex. Whole-cell recordings revealed that this increased spine density is correlated with an enhanced spontaneous excitatory activity in KCC2-transfected neurons. Precocious expression of the N-terminal deleted form of KCC2, which lacks the chloride transporter function, also increased spine density. In contrast, no effect on spine density was observed following in utero electroporation of a point mutant of KCC2 (KCC2-C568A) where both the cotransporter function and the interaction with the cytoskeleton are disrupted. Transfection of the C-terminal domain of KCC2, a region involved in the interaction with the dendritic cytoskeleton, also increased spine density. Collectively, these results demonstrate a role for KCC2 in excitatory synaptogenesis in vivo through a mechanism that is independent of its ion transport function.

Ion-exchange resins as stationary phase in reactive chromatography

Dynamic behavior of bothisothermal and non-isothermal single-column chromatographic reactors with an ion-exchange resin as the stationary phase was investigated. The reactor performance was interpreted by using results obtained when studying the effect of the resin properties on the equilibrium and kinetic phenomena occurring simultaneously in the reactor. Mathematical models were derived for each phenomenon and combined to simulate the chromatographic reactor. The phenomena studied includes phase equilibria in multicomponent liquid mixture¿ion-exchange resin systems, chemicalequilibrium in the presence of a resin catalyst, diffusion of liquids in gel-type and macroporous resins, and chemical reaction kinetics. Above all, attention was paid to the swelling behavior of the resins and how it affects the kinetic phenomena. Several poly(styrene-co-divinylbenzene) resins with different cross-link densities and internal porosities were used. Esterification of acetic acid with ethanol to produce ethyl acetate and water was used as a model reaction system. Choosing an ion-exchange resin with a low cross-link density is beneficial inthe case of the present reaction system: the amount of ethyl acetate as well the ethyl acetate to water mole ratio in the effluent stream increase with decreasing cross-link density. The enhanced performance of the reactor is mainly attributed to increasing reaction rate, which in turn originates from the phase equilibrium behavior of the system. Also mass transfer considerations favor the use ofresins with low cross-link density. The diffusion coefficients of liquids in the gel-type ion-exchange resins were found to fall rapidly when the extent of swelling became low. Glass transition of the polymer was not found to significantlyretard the diffusion in sulfonated PS¿DVB ion-exchange resins. It was also shown that non-isothermal operation of a chromatographic reactor could be used to significantly enhance the reactor performance. In the case of the exothermic modelreaction system and a near-adiabatic column, a positive thermal wave (higher temperature than in the initial state) was found to travel together with the reactive front. This further increased the conversion of the reactants. Diffusion-induced volume changes of the ion-exchange resins were studied in a flow-through cell. It was shown that describing the swelling and shrinking kinetics of the particles calls for a mass transfer model that explicitly includes the limited expansibility of the polymer network. A good description of the process was obtained by combining the generalized Maxwell-Stefan approach and an activity model that was derived from the thermodynamics of polymer solutions and gels. The swelling pressure in the resin phase was evaluated by using a non-Gaussian expression forthe polymer chain length distribution. Dimensional changes of the resin particles necessitate the use of non-standard mathematical tools for dynamic simulations. A transformed coordinate system, where the mass of the polymer was used as a spatial variable, was applied when simulating the chromatographic reactor columns as well as the swelling and shrinking kinetics of the resin particles. Shrinking of the particles in a column leads to formation of dead volume on top of the resin bed. In ordinary Eulerian coordinates, this results in a moving discontinuity that in turn causes numerical difficulties in the solution of the PDE system. The motion of the discontinuity was eliminated by spanning two calculation grids in the column that overlapped at the top of the resin bed. The reactive and non-reactive phase equilibrium data were correlated with a model derived from thethermodynamics of polymer solution and gels. The thermodynamic approach used inthis work is best suited at high degrees of swelling because the polymer matrixmay be in the glassy state when the extent of swelling is low.

Ion mobility spectrometry in liquid analysis

Ion mobility spectrometry (IMS) is a straightforward, low cost method for fast and sensitive determination of organic and inorganic analytes. Originally this portable technique was applied to the determination of gas phase compounds in security and military use. Nowadays, IMS has received increasing attention in environmental and biological analysis, and in food quality determination. This thesis consists of literature review of suitable sample preparation and introduction methods for liquid matrices applicable to IMS from its early development stages to date. Thermal desorption, solid phase microextraction (SPME) and membrane extraction were examined in experimental investigations of hazardous aquatic pollutants and potential pollutants. Also the effect of different natural waters on the extraction efficiency was studied, and the utilised IMS data processing methods are discussed. Parameters such as extraction and desorption temperatures, extraction time, SPME fibre depth, SPME fibre type and salt addition were examined for the studied sample preparation and introduction methods. The observed critical parameters were extracting material and temperature. The extraction methods showed time and cost effectiveness because sampling could be performed in single step procedures and from different natural water matrices within a few minutes. Based on these experimental and theoretical studies, the most suitable method to test in the automated monitoring system is membrane extraction. In future an IMS based early warning system for monitoring water pollutants could ensure the safe supply of drinking water. IMS can also be utilised for monitoring natural waters in cases of environmental leakage or chemical accidents. When combined with sophisticated sample introduction methods, IMS possesses the potential for both on-line and on-site identification of analytes in different water matrices.

Effects of losartan combined with exercise training in spontaneously hypertensive rats

We investigate whether combined treatment with losartan, an angiotensin II receptor blocker, and exercise training (ET) in spontaneously hypertensive rats (SHR) would have an additive effect in reducing hypertension and improving baroreflex sensitivity when compared with losartan alone. Male SHR (8 weeks old) were assigned to 3 groups: sedentary placebo (SP, N = 16), sedentary under losartan treatment (SL, N = 11; 10 mg kg-1 day-1, by gavage), and ET under losartan treatment (TL, N = 10). ET was performed on a treadmill 5 days/week for 60 min at 50% of peak VO2, for 18 weeks. Blood pressure (BP) was measured with a catheter inserted into the carotid artery, and cardiac output with a microprobe placed around the ascending aorta. The baroreflex control of heart rate was assessed by administering increasing doses of phenylephrine and sodium nitroprusside (iv). Losartan significantly reduced mean BP (178 ± 16 vs 132 ± 12 mmHg) and left ventricular hypertrophy (2.9 ± 0.4 vs 2.5 ± 0.2 mg/g), and significantly increased baroreflex bradycardia and tachycardia sensitivity (1.0 ± 0.3 vs 1.7 ± 0.5 and 2.0 ± 0.7 vs 3.2 ± 1.7 bpm/mmHg, respectively) in SL compared with SP. However, losartan combined with ET had no additional effect on BP, baroreflex sensitivity or left ventricular hypertrophy when compared with losartan alone. In conclusion, losartan attenuates hypertension and improves baroreflex sensitivity in SHR. However, ET has no synergistic effect on BP in established hypertension when combined with losartan, at least at the dosage used in this investigation.

Solid-state reference and ion-selective electrodes : towards portable potentiometric sensing

Potentiometric sensors are very attractive tools for chemical analysis because of their simplicity, low power consumption and low cost. They are extensively used in clinical diagnostics and in environmental monitoring. Modern applications of both fields require improvements in the conventional construction and in the performance of the potentiometric sensors, as the trends are towards portable, on-site diagnostics and autonomous sensing in remote locations. The aim of this PhD work was to improve some of the sensor properties that currently hamper the implementation of the potentiometric sensors in modern applications. The first part of the work was concentrated on the development of a solid-state reference electrode (RE) compatible with already existing solid-contact ion-selective electrodes (ISE), both of which are needed for all-solid-state potentiometric sensing systems. A poly(vinyl chloride) membrane doped with a moderately lipophilic salt, tetrabutylammonium-tetrabutylborate (TBA-TBB), was found to show a satisfactory stability of potential in sample solutions with different concentrations. Its response time was nevertheless slow, as it required several minutes to reach the equilibrium. The TBA-TBB membrane RE worked well together with solid-state ISEs in several different situations and on different substrates enabling a miniature design. Solid contacts (SC) that mediate the ion-to-electron transduction are crucial components of well-functioning potentiometric sensors. This transduction process converting the ionic conduction of an ion-selective membrane to the electronic conduction in the circuit was studied with the help of electrochemical impedance spectroscopy (EIS). The solid contacts studied were (i) the conducting polymer (CP) poly(3,4-ethylienedioxythiophene) (PEDOT) and (ii) a carbon cloth having a high surface area. The PEDOT films were doped with a large immobile anion poly(styrene sulfonate) (PSS-) or with a small mobile anion Cl-. As could be expected, the studied PEDOT solid-contact mediated the ion-toelectron transduction more efficiently than the bare glassy carbon substrate, onto which they were electropolymerized, while the impedance of the PEDOT films depended on the mobility of the doping ion and on the ions in the electrolyte. The carbon cloth was found to be an even more effective ion-to-electron transducer than the PEDOT films and it also proved to work as a combined electrical conductor and solid contact when covered with an ion-selective membrane or with a TBA-TBB-based reference membrane. The last part of the work was focused on improving the reproducibility and the potential stability of the SC-ISEs, a problem that culminates to the stability of the standard potential E°. It was proven that the E° of a SC-ISE with a conducting polymer as a solid contact could be adjusted by reducing or oxidizing the CP solid contact by applying current pulses or a potential to it, as the redox state of the CP solid-contact influences the overall potential of the ISE. The slope and thus the analytical performance of the SC-ISEs were retained despite the adjustment of the E°. The shortcircuiting of the SC-ISE with a conventional large-capacitance RE was found to be a feasible instrument-free method to control the E°. With this method, the driving force for the oxidation/reduction of the CP was the potential difference between the RE and the SC-ISE, and the position of the adjusted potential could be controlled by choosing a suitable concentration for the short-circuiting electrolyte. The piece-to-piece reproducibility of the adjusted potential was promising, and the day-today reproducibility for a specific sensor was excellent. The instrumentfree approach to control the E° is very attractive considering practical applications.