Book Review: Regulating Code : Good Governance and Better Regulation in the Information Age

Digital technologies have profoundly changed not only the ways we create, distribute, access, use and re-use information but also many of the governance structures we had in place. Overall, "older" institutions at all governance levels have grappled and often failed to master the multi-faceted and multi-directional issues of the Internet. Regulatory entrepreneurs have yet to discover and fully mobilize the potential of digital technologies as an influential factor impacting upon the regulability of the environment and as a potential regulatory tool in themselves. At the same time, we have seen a deterioration of some public spaces and lower prioritization of public objectives, when strong private commercial interests are at play, such as most tellingly in the field of copyright. Less tangibly, private ordering has taken hold and captured through contracts spaces, previously regulated by public law. Code embedded in technology often replaces law. Non-state action has in general proliferated and put serious pressure upon conventional state-centered, command-and-control models. Under the conditions of this "messy" governance, the provision of key public goods, such as freedom of information, has been made difficult or is indeed jeopardized.The grand question is how can we navigate this complex multi-actor, multi-issue space and secure the attainment of fundamental public interest objectives. This is also the question that Ian Brown and Chris Marsden seek to answer with their book, Regulating Code, as recently published under the "Information Revolution and Global Politics" series of MIT Press. This book review critically assesses the bold effort by Brown and Marsden.

Procedures for monitoring the importation of motor vehicles and motor vehicle equipment : as provided in Title 19-Code of Federal Regulations 12.80.

DOT HS 803 546

International cable directory of the world, in conjunction with Western Union telegraphic code system.

Description based on: 1908.

Interstate Commerce Commission: impacts of eliminating or transferring motor carrier and other functions. Statement of Barry T. Hill.

Mode of access: Internet.

National electrical safety code for examination, trial, and constructive criticism.

1st edition issued with title: Proposed national electrical safety code ...

National Oceanographic Data Center taxonomic code /

Rev. ed. of: NODC taxonomic code. 3rd. ed. 1981.

Management audit of the expenditures from the Grade Crossing Protection Fund : Illinois Commerce Commission [and] Illinois Department of Transportation.

"This is our report of the Management Audit of the Expenditures from the Grade Crossing Protection Fund which is administered by the Illinois Commerce Commission but appropriated to the Illinois Department of Transportation. The audit was conducted pursuant to Legislative Audit Commission Resolution Number 123. This audit was conducted in accordance with generally accepted government auditing standards and the audit standards promulgated by the Office of the Auditor General at 74 Ill. Adm. Code-420.310. The audit report is transmitted in conformance with Section 3-14 of the Illinois State Auditing Act."--Cover letter.

Administrative report of the directors of departments under the civil administrative code together with the adjutant general's report..

1917/18 contains reports of the following departments: Dept. of Finance, Dept. of Agriculture, Dept. of Labor, Dept. of Mines and Minerals, Dept. of Public Works and Buildings, Dept. of Public Welfare, Dept. of Public Health, Dept. of Trade and Commerce, Dept. of Registration and Education, Military and Naval Dept.

Code of Commercial nomenclature.

Also issued under Spanish and Portuguese titles.

Shieldose : a computer code for space-shielding radiation dose calculations /

Includes bibliographical references (p. 29).

Reliability-based evaluation of design code provisions for circular concrete-filled steel columns

This paper presents an investigation of design code provisions for steel-concrete composite columns. The study covers the national building codes of United States, Canada and Brazil, and the transnational EUROCODE. The study is based on experimental results of 93 axially loaded concrete-filled tubular steel columns. This includes 36 unpublished, full scale experimental results by the authors and 57 results from the literature. The error of resistance models is determined by comparing experimental results for ultimate loads with code-predicted column resistances. Regression analysis is used to describe the variation of model error with column slenderness and to describe model uncertainty. The paper shows that Canadian and European codes are able to predict mean column resistance, since resistance models of these codes present detailed formulations for concrete confinement by a steel tube. ANSI/AISC and Brazilian codes have limited allowance for concrete confinement, and become very conservative for short columns. Reliability analysis is used to evaluate the safety level of code provisions. Reliability analysis includes model error and other random problem parameters like steel and concrete strengths, and dead and live loads. Design code provisions are evaluated in terms of sufficient and uniform reliability criteria. Results show that the four design codes studied provide uniform reliability, with the Canadian code being best in achieving this goal. This is a result of a well balanced code, both in terms of load combinations and resistance model. The European code is less successful in providing uniform reliability, a consequence of the partial factors used in load combinations. The paper also shows that reliability indexes of columns designed according to European code can be as low as 2.2, which is quite below target reliability levels of EUROCODE. (C) 2009 Elsevier Ltd. All rights reserved.

Verification of a mixed high-order accurate DNS code for laminar turbulent transition by the method of manufactured solutions

This paper presents results on a verification test of a Direct Numerical Simulation code of mixed high-order of accuracy using the method of manufactured solutions (MMS). This test is based on the formulation of an analytical solution for the Navier-Stokes equations modified by the addition of a source term. The present numerical code was aimed at simulating the temporal evolution of instability waves in a plane Poiseuille flow. The governing equations were solved in a vorticity-velocity formulation for a two-dimensional incompressible flow. The code employed two different numerical schemes. One used mixed high-order compact and non-compact finite-differences from fourth-order to sixth-order of accuracy. The other scheme used spectral methods instead of finite-difference methods for the streamwise direction, which was periodic. In the present test, particular attention was paid to the boundary conditions of the physical problem of interest. Indeed, the verification procedure using MMS can be more demanding than the often used comparison with Linear Stability Theory. That is particularly because in the latter test no attention is paid to the nonlinear terms. For the present verification test, it was possible to manufacture an analytical solution that reproduced some aspects of an instability wave in a nonlinear stage. Although the results of the verification by MMS for this mixed-order numerical scheme had to be interpreted with care, the test was very useful as it gave confidence that the code was free of programming errors. Copyright (C) 2009 John Wiley & Sons, Ltd.

Theory manual to OctVCE – a cartesian cell CFD code with special application to blast wave problems, Department of Mechanical Engineering Report 2007/12

OctVCE is a cartesian cell CFD code produced especially for numerical simulations of shock and blast wave interactions with complex geometries, in particular, from explosions. Virtual Cell Embedding (VCE) was chosen as its cartesian cell kernel for its simplicity and sufficiency for practical engineering design problems. The code uses a finite-volume formulation of the unsteady Euler equations with a second order explicit Runge-Kutta Godonov (MUSCL) scheme. Gradients are calculated using a least-squares method with a minmod limiter. Flux solvers used are AUSM, AUSMDV and EFM. No fluid-structure coupling or chemical reactions are allowed, but gas models can be perfect gas and JWL or JWLB for the explosive products. This report also describes the code’s ‘octree’ mesh adaptive capability and point-inclusion query procedures for the VCE geometry engine. Finally, some space will also be devoted to describing code parallelization using the shared-memory OpenMP paradigm. The user manual to the code is to be found in the companion report 2007/13.

User guide for shock and blast simulation with the OctVCE code (version 3.5+), Department of Mechanical Engineering Report 2007/13

OctVCE is a cartesian cell CFD code produced especially for numerical simulations of shock and blast wave interactions with complex geometries. Virtual Cell Embedding (VCE) was chosen as its cartesian cell kernel as it is simple to code and sufficient for practical engineering design problems. This also makes the code much more ‘user-friendly’ than structured grid approaches as the gridding process is done automatically. The CFD methodology relies on a finite-volume formulation of the unsteady Euler equations and is solved using a standard explicit Godonov (MUSCL) scheme. Both octree-based adaptive mesh refinement and shared-memory parallel processing capability have also been incorporated. For further details on the theory behind the code, see the companion report 2007/12.