Perfeccionamiento de las metodologías docentes en la enseñanza de la construcción mixta en grado y postgrado en la Universidad Politécnica de Cataluña (UPC) y la Universidad de Camaguey (UC)

Estudio elaborado a partir de una estancia en la Universitat Polictecnica de Cataluña entre marzo i junio del 2007.El proyecto tiene como objetivo general el perfeccionamiento de las metodologías docentes en la enseñanza de la construcción mixta en grado y postgrado en la Universidad Politécnica de Cataluña (UPC) y la Universidad de Camagüey (UC), en correspondencia con la situación actual y perspectiva de la normativa europea, española y cubana. En el trabajo se realiza una valoración sobre programas experimentales en estructuras mixtas y sus resultados, así como su interrelación con la modelación numérica. Se evalúa la correspondencia entre las normativas europeas, española y cubana y se definen los aspectos específicos que deben ser perfeccionados o complementados en la normatividad vigente en Cuba, así como la estrategia general para acometerlo. Para caracterizar la enseñanza de la construcción mixta en la UPC y la UC, se parte de la valoración de información sobre asignaturas similares en un grupo seleccionado de universidades y sobre el contexto que sirve de marco al perfeccionamiento. Se realiza el diagnostico del sistema de objetivos, conocimientos y organización metodológica en los programas de grado y postgrado y se ofrecen recomendaciones generales para el perfeccionamiento de la enseñanza de la construcción mixta en la UPC y la UC. Finalmente, se realizan propuestas detalladas para ambas instituciones, para el perfeccionamiento de las metodologías docentes, con enfoques generales similares, respetando los criterios específicos y formatos de cada entorno. Se concibe un sistema integrado de actividades para cada asignatura, lográndose que, a pesar de las particularidades de cada contexto, el enfoque de trabajo sea coincidente en gran medida, lo que favorece la continuidad en las relaciones de colaboración entre ambas instituciones.

Codis no lineals en Magma: noves construccions

L'objectiu principal d'aquest projecte és ampliar la llibreria BinaryCodes, iniciada al 2007, que ens permet construir i manipular codis binaris lineals i no lineals. Per aquest motiu, s'han desenvolupat una sèrie de funcions, amb els seus corresponents tests i exemples, en l'entorn de programació matemàtica Magma. Aquestes funcions consisteixen bàsicament en la construcció de nous codis a partir d'altres ja existents.

Estrategies per la inversió tridimensional de dades magnetotel.lúriques:

Projecte de recerca elaborat a partir d’una estada a la Dublin Institute for Advanced Studies, Irlanda, entre setembre i desembre del 2009.En els últims anys s’ha realitzat un important avanç en la modelització tridimensional en magnetotel•lúrica (MT) gracies a l'augment d’algorismes d’inversió tridimensional disponibles. Aquests codis utilitzen diferents formulacions del problema (diferències finites, elements finits o equacions integrals), diverses orientacions del sistema de coordenades i, o bé en el conveni de signe, més o menys, en la dependència temporal. Tanmateix, les impedàncies resultants per a tots els valors d'aquests codis han de ser les mateixes una vegada que es converteixen a un conveni de signe comú i al mateix sistema de coordenades. Per comparar els resultats dels diferents codis hem dissenyat models diferents de resistivitats amb estructures tridimensional incrustades en un subsòl homogeni. Un requisit fonamental d’aquests models és que generin impedàncies amb valors importants en els elements de la diagonal, que no són menyspreables. A diferència dels casos del modelització de dades magnetotel.lúriques unidimensionals i bidimensionals, pel al cas tridimensional aquests elements de les diagonals del tensor d'impedància porten informació sobre l'estructura de la resistivitat. Un dels models de terreny s'utilitza per comparar els diferents algoritmes que és la base per posterior inversió dels diferents codis. Aquesta comparació va ser seguida de la inversió per recuperar el conjunt de dades d'una estructura coneguda.

ARCHITECTING USER-CENTRIC PRIVACY-AS-A-SET-OF-SERVICES: DIGITAL IDENTITY RELATED PRIVACY FRAMEWORK

AbstractDigitalization gives to the Internet the power by allowing several virtual representations of reality, including that of identity. We leave an increasingly digital footprint in cyberspace and this situation puts our identity at high risks. Privacy is a right and fundamental social value that could play a key role as a medium to secure digital identities. Identity functionality is increasingly delivered as sets of services, rather than monolithic applications. So, an identity layer in which identity and privacy management services are loosely coupled, publicly hosted and available to on-demand calls could be more realistic and an acceptable situation. Identity and privacy should be interoperable and distributed through the adoption of service-orientation and implementation based on open standards (technical interoperability). Ihe objective of this project is to provide a way to implement interoperable user-centric digital identity-related privacy to respond to the need of distributed nature of federated identity systems. It is recognized that technical initiatives, emerging standards and protocols are not enough to guarantee resolution for the concerns surrounding a multi-facets and complex issue of identity and privacy. For this reason they should be apprehended within a global perspective through an integrated and a multidisciplinary approach. The approach dictates that privacy law, policies, regulations and technologies are to be crafted together from the start, rather than attaching it to digital identity after the fact. Thus, we draw Digital Identity-Related Privacy (DigldeRP) requirements from global, domestic and business-specific privacy policies. The requirements take shape of business interoperability. We suggest a layered implementation framework (DigldeRP framework) in accordance to model-driven architecture (MDA) approach that would help organizations' security team to turn business interoperability into technical interoperability in the form of a set of services that could accommodate Service-Oriented Architecture (SOA): Privacy-as-a-set-of- services (PaaSS) system. DigldeRP Framework will serve as a basis for vital understanding between business management and technical managers on digital identity related privacy initiatives. The layered DigldeRP framework presents five practical layers as an ordered sequence as a basis of DigldeRP project roadmap, however, in practice, there is an iterative process to assure that each layer supports effectively and enforces requirements of the adjacent ones. Each layer is composed by a set of blocks, which determine a roadmap that security team could follow to successfully implement PaaSS. Several blocks' descriptions are based on OMG SoaML modeling language and BPMN processes description. We identified, designed and implemented seven services that form PaaSS and described their consumption. PaaSS Java QEE project), WSDL, and XSD codes are given and explained.

Xifratge d'arxius

L'objectiu d'aquest treball és la implementació d'una utilitat per xifrar fitxers amb claus basades en contrasenyes. En concret, l'usuari introduirà una contrasenya que li permetrà xifrar i, posteriorment desxifrar, un determinat arxiu o carpeta. La clau per xifrar i desxifrar es basa en la contrasenya introduïda de forma que el sistema sigui prou segur.

Aplicació INERCIPHER

El programa INERCIPHER és una aplicació per realitzar el xifrat i desxifrat dels arxius i per verificar la integritat dels documents. Com a base per desenvolupar aquestes funcionalitats han estat utilitzats dos tipus de xifrat de clau compartida: xifrat en flux i xifrat en bloc.

Principaux résultats de l'étude suisse sur les DRG (étude Casemix). [Main results of the Swiss study on DRGs (Casemix Study)].

Sponsored by the Health Administrations of nine cantons, this study was conducted by the University Institute of Social and Preventive Medicine in Lausanne in order to assess how DRGs could be used within the Swiss context. A data base mainly provided by the Swiss VESKA statistics was used. The first step provided the transformation of Swiss diagnostic and intervention codes into US codes, allowing direct use of the Yale Grouper for DRG. The second step showed that the overall performance of DRG in terms of variability reduction of the length of stay was similar to the one observed in US; there are, however, problems when the homogeneity of medicotechnical procedures for DRG is considered. The third steps showed how DRG could be used as an account unit in hospital, and how costs per DRG could be estimated. Other examples of applications of DRG were examined, for example comparison of Casemix or length of stay between hospitals.

A Importância do Ecoturismo no Património Arquitectónico de Cabo Verde das Potencialidades à Prática

Desde a última década do séc. XX, o turismo em Cabo Verde tem sido um dos sectores que mais cresce, atraindo maior investimento directo estrangeiro. Contudo, este crescimento gerou também maior pressão sobre os recursos existentes, com impactes negativos a vários níveis. Tem-se reflectido e discutido a sustentabilidade do turismo em território nacional, com objectivos claros de valorização do destino turístico cabo-verdiano, através da conservação e melhoria do ambiente natural, social e cultural. A aposta das autoridades cabo-verdianas no incremento do turismo para o séc. XXI levou a eleição do ecoturismo como a actividade de futuro, com o objectivo de melhorar a competitividade da oferta turística, ser uma alternativa no sector. Uma actividade que pode ser implementada em qualquer ilha, desde que bem aproveitada a vasta oferta de produtos existentes, envolva e forme a população da importância da conservação da biodiversidade e contribua para a erradicação da pobreza ao gerar recursos económicos para as comunidades locais. Deste modo, se requer pensar que arquitectura para o planeamento e realização de infra- estruturas físicas para o adequado desenvolvimento do ecoturismo em Cabo Verde. Os actores directos como os arquitectos, engenheiros civis e planeadores têm uma enorme responsabilidade ao desenhar e executar obras para o turismo, sobre tudo em ecossistemas de grande fragilidade como os que caracterizam as áreas naturais. Sendo um assunto relativamente recente no país, ainda não se criaram normas, regras, directivas claras para o desenvolvimento deste tipo de infra-estruturas turísticas. Em muitos casos, são os próprios desenhadores e construtores, bem como aos seus clientes, quando demonstram alguma sensibilidade na conservação e preservação de áreas de significação ecológica, estabelecem os seus próprios critérios de desenho e códigos éticos que garantam o mínimo de impacte ambiental e uma interacção harmoniosa e sustentável entre a obra física e os espaços circundantes. O presente trabalho tem como objectivo discutir e analisar qual a importância do ecoturismo no panorama arquitectónico cabo-verdiano e se este turismo sustentável será apenas uma ideia teórica, um modelo ideal de actividade ou passível de ser aplicável, de se observar na prática.

Iowa Public Library Statistics, July 2005-June 2006

The 2005-2006 (FY06) edition of Iowa Public Library Statistics includes information on income, expenditures, collections, circulation, and other measures, including staff. Each section is arranged by size code, then alphabetically by city. The totals and percentiles for each size code grouping are given immediately following the alphabetical listings. Totals for all reporting libraries are given at the end of each section. There are 542 libraries included in this publication; 10 did not report. The Table of Cities and Size Codes lists the libraries alphabetically and gives their size codes. The table allows a user of this publication to locate information about a specific library. The following table lists the size code designations, the population range in each size code, the number of libraries reporting in each size code, and the total population of the reporting libraries in each size code. The total population of the 542 libraries is 2,243,396. Population data is used to determine per capita figures used throughout the publication.

Evaluation of the Buena Vista IBRD Bridge: A Furthering of Accelerated Bridge Construction in Iowa, February 2012

The need to construct bridges that last longer, are less expensive, and take less time to build has increased. The importance of accelerated bridge construction (ABC) technologies has been realized by the Federal Highway Administration (FHWA) and the Iowa Department of Transportation (DOT) Office of Bridges and Structures. This project is another in a series of ABC bridge projects undertaken by the Iowa DOT. Buena Vista County, Iowa, with the assistance of the Iowa Department of Transportation (DOT) and the Bridge Engineering Center (BEC) at Iowa State University, constructed a two-lane single-span precast box girder bridge, using rapid construction techniques. The design involved the use of precast, pretensioned components for the bridge superstructure, substructure, and backwalls. This application and demonstration represents an important step in the development and advancement of these techniques in Iowa as well as nationwide. Prior funding for the design and construction of this bridge (including materials) was obtained through the FHWA Innovative Bridge Research and Deployment (IBRD) Program. The Iowa Highway Research Board (IHRB) provided additional funding to test and evaluate the bridge. This project directly addresses the IBRD goal of demonstrating (and documenting) the effectiveness of innovative materials and construction techniques for the construction of new bridge structures. Evaluation of performance was formulated through comparisons with design assumptions and recognized codes and standards including American Association of State Highway and Transportation Officials (AASHTO) specifications.

Toimintolaskentajärjestelmän kehittäminen, Case: Xyrofin Oy

Tutkielman tavoitteena on toimintolaskentajärjestelmän kehittäminen osaksi case-yrityksen johdon informaatiojärjestelmää. Tutkielman empiirisessä osassa selvitetään haastattelujen ja osallistuvan havainnoinnin avulla toimintolaskennan asema ja nykytila sekä sille asetettavat tavoitteet. Tutkimusmetodologia on konstruktiivinen ja metodi case-tutkimus. Case-yrityksessä käytettiin toimintolaskentaa yrityksen kehittämisprojektissa vuonna 1997. Sen hyväksikäyttö on muuten ollut vähäistä. Yrityksen omistussuhteissa tapahtuneet muutokset, siitä johtuva resurssipula sekä taulukkolaskennalla toteutetun laskentamallin kankeus ovat olleet siihen osittain syynä. Toimintolaskenta rinnakkaisena laskentajärjestelmänä on jäänyt toissijaiseksi. Yrityksen johtoryhmän jäsenet odottavat toimintolaskentajärjestelmältä tällä hetkellä ensisijaisesti tuotekoodi- ja asiakaskannattavuuksien selvittämistä. Yksinkertaistamalla mallia ja helpottamalla päivittämistä saadaan tuotekoodien kustannukset ja kannattavuudet nopeammin. Yhdistämällä ne muista tietojärjestelmistä saataviin tietoihin pystytään tarvittaessa laskemaan asiakaskannattavuudet. Johtoryhmä saa näin tarvitsemansa kannattavuustiedon tuotteista ja asiakkaista päätöstensä tueksi.

The Changing Face of Psychiatric Nursing –Care or Control?

This report has been written as part of the project “Toward improved quality – developing nurse’s continuing vocational training in hospitals and inpatient units”. Its overall goal is to ensure high quality, ethically appropriate and therapeutically effective interventions to enable nurses to manage distressed and disturbed patients in European psychiatric hospitals and inpatient units. In this large-scale, multinational projects there are all together six European countries involved: Finland, Ireland, England, Portugal, Italy and Lithuania. The project work plan were during autumn 2006 and spring 2007. The content of this publication was produced in the first stage of the project aiming to collect the preliminary source material for the project. The literature review was carried out in the project stage, providing the groundwork for the next steps for the project. This project aims to develop an interactive multinational portal with training material. Therefore, it is important to share an understanding of basic information, psychiatric nurse’s continuing vocational education, laws and ethical codes and patient restriction used in mental health care. In this publication, the purpose of the material produced here is to understand nurses’ educational need related to vocational continuing education and to be used in further project stages as an empirical data collection. The data were collected as a preliminary source material for latter phases where nurse’s perceptions of the current practice, nurse’s attitudes to mental illness, prevalence of use of seclusion room and existing and desired vocational training provision will be collected in six different European countries. The following organisations are involved in this project: University of Turku, Dublin City University, St. Vincent Hospital, National Council for the Professional Development of Nursing and Midwifery, University of Padova, Klaipeda College - Health Faculty, Klaipeda Psychiatric Hospital, Escola Superior de Enfermagem de Lisboa, Centro Hospitalar Psiquiátrico de Lisboa, Omnia Vocational Institution the Espoo Region, Kellokoski psychiatric hospital, Hyvinkää hospital area, Pirkanmaa Hospital District, Kingston University & St. George’s Medical School and South West London & St. George’s Mental Health NHS Trust. A wide variety of different countries, organisations and individuals in this project give us a strong confidence that theoretical, practical, ethical and political issues around the topic of interest will be taken account during this project lifetime. We are aware the content of this book will be partially outdated almost as soon as it has been published. We still hope that this publication will encourage nurses and different professions working in mental health care field to have a basic understanding of similarities and differences between different European countries related in mental health care. We also hope that this publication will inspirate and motivate nurses in maintaining and developing the quality of psychiatric care in Europe.

Thermal-Hydraulic Studies on the Safety Of VVER-440 Type Nuclear Power Plants

This thesis includes several thermal hydraulic analyses related to the Loviisa WER 440 nuclear power plant units. The work consists of experimental studies, analysis of the experiments, analysis of some plant transits and development of a calculational model for calculation of boric acid concentrations in the reactor. In the first part of the thesis, in the case of won of boric acid solution behaviour during long term cooling period of LOCAs, experiments were performed in scaled down test facilities. The experimental data together with the results of RELAPS/MOD3 simulations were used to develop a model for calculations of boric acid concentrations in the reactor during LOCAs. The results of calculations showed that margins to critical concentrations that would lead to boric acid crystallization were large, both in the reactor core and in the lower plenum. This was mainly caused by the fact that water in the primary cooling circuit includes borax (Na)BsO,.IOHZO), which enters the reactor when ECC water is taken from the sump and greatly increases boric acid solubility in water. In the second part, in the case of simulation of horizontal steam generators, experiments were performed with PACTEL integral test loop to simulate loss of feedwater transients. The PACTEL experiments, as well as earlier REWET III natural circulation tests, were analyzed with RELAPS/MOD3 Version Sm5 code. The analysis showed that the code was capable of simulating the main events during the experiments. However, in the case of loss of secondary side feedwater the code was not completely capable to simulate steam superheating in the secondary side of the steam generators. The third part of the work consists of simulations of Loviisa VVER reactor pump trip transients with RELAPSlMODI Eur, RELAPS/MOD3 and CATHARE codes. All three codes were capable to simulate the two selected pump trip transients and no significant differences were found between the results of different codes. Comparison of the calculated results with the data measured in the Loviisa plant also showed good agreement.

Análisis del proceso de adquisición del código audiovisual y de la intervención de los agentes que forman a los ciudadanos en el conocimiento de los medios

The research group Gre‐TICE (Grupo de investigación en tecnologías de la Información y la Comunicación en Educación) has the acquisition of the multimedia language and their use as a form of expression as one of their lines of research. During the academic year 2002‐ 2003, following previous work in the use of ICT in Education, commenced upon the project: “The acquisition of visual and sound codes and the processes related to the visual media”. The intention of this project is to study how formal or non‐formal education context can help young adults and children to acquire visual and sound codes to become ‘critical consumers’ with the media and to use the tools in a creative way. To achieve this objective, the project team has developed a partner group which includes professional from different European regions; including teachers and managers from across the age spectrum, government institutions and cultural organisations. Whilst the project will call upon qualitative analysis of the previous projects / research, it will seek to develop ‘Good Practice’ guides and other resources/ materials to be disseminated to project partners (and others) to build innovative actions throughout the European region

Hajautetun tuotannon verkkoonliittäminen - verkkokoodit ja käytännön toimet

Euroopan unionin asettamat uusiutuvan energian lisäämistavoitteet ovat kasvattaneet hajautetun tuotannon määrää Euroopassa. Eri hajautetun tuotannon verkkokoodit asettavat tuotantolaitoksille omat vaatimuksensa, mikä vaikeuttaa eri toimijoita, joten yhtenäiselle verkkokoodille on tarvetta. ENTSO-E onkin luomassa tällä hetkellä Euroopan unionille yhtenäisiä pilottiverkkokoodeja, joiden tarkoitus on myöhemmin kattaa kaikkia tuotantolaitoksia koko Euroopassa. Tämän vuoksi ENTSO-E:n verkkokoodien vaatimuksia on syytä tutkia. Tässä diplomityössä tarkastellaan hajautetun tuotannon nykyisiä ja ENTSO-E:n kehitteillä olevia verkkokoodeja. Työssä tutkitaan myös älykkäiden verkkojen ja verkkokoodien kehitystä. Verkkokoodien vertailuja suoritetaan pohjoismaisesta näkökulmasta, mutta vertailuun on otettu myös muita Euroopan maita. Tarkastelu painottuu siirto- ja jakeluverkkokoodien osalta tuulivoimalle asetettaviin vaatimuksiin. Mikrotuotannon verkkokoodien ja käytännön toimien tarkastelu keskittyy invertterin kautta verkkoonliitettäviin tuotantolaitoksiin, joissa aurinkotuotanto on merkittävin tuotantomuoto.